Used Wema Probst Cross Milling Machine for sale (67,093)

Condition: used, Wema Probst profile milling machine Main motor: 11 kW Hnodpfxsc N N U No Af Hep Disassembled and ready for loading.

Condition: excellent (used), SCM internships in excellent condition Hnsdpet Hkq Rofx Af Hsp

Condition: good (used), Stegherr 2 motors, each approximately 2.2 kW Connected load approximately 4.5 kW Compressed air 6 bar Hsdpfx Afozakw Ej Hjnp Voltage 380 V, 50 Hz

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. Hnsdpfx Afjwt Abwe Hep The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, Year of construction: 1989, functionality: fully functional, The machine worked perfectly when we bought it. We’ve never used it. That’s why we’re selling it. We don’t need it. Hsdpfx Afoya Alze Hjnp

Condition: good (used), Year of construction: 1996, functionality: fully functional, Diameter x width: 750 x 1,500 mm max. operating pressure 300 bar Cutting force 60 kN Weight: approx. 2,800 kg 76 chisel Hnjdpfxoqnvtzj Af Hjp

Condition: excellent (used), Year of construction: 2002, The KSF-2E is the world’s leading specialized CNC milling machine for fully automated production and complete machining of high-quality cross joints and grids in the serial manufacturing of glazing bars for windows and doors. Thanks to its dedicated aggregates, the machine produces cross joints from wood, aluminium, MDF, or PVC with outstanding quality and precisely processes all components of the glazing bar grids. Hodpfx Aoxl Dnaof Hsnp OPERATIONS: • Cross joints in various designs and sizes • End processing of glazing bars • Cutting frame profiles to size The machine is additionally equipped with a transverse feed/magazine for components.

Condition: refurbished (used), Cross Rail Milling Machine Rsc Tccgsx Rdw Ioxasck Manufacturer: Stegherr Type: KSF Designed for milling cross rail joints, e.g. in windows, doors, and furniture. Equipped with 3 milling units: One upper and one lower milling unit perform parallel milling operations similar to angled cuts, while the third unit simultaneously performs flush milling. The machine table moves pneumatically-hydraulically. Proc Tccjw Imhcogxaef Hnsdjx Rhwlepfx Af Hop Feed and return speeds are adjustable. Foot-operated control. 2 motors, each with a power of approx. 2.2 kW Total power consumption approx. 4.5 kW Compressed air pressure: 6 bar Voltage: 380 V 50 Hz Suction connection diameter: 180 mm

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Hnjdpfx Afjyahv Se Hjp Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 1989, operating hours: 7,384 h, functionality: fully functional, total width: 1,000 mm, total length: 5,500 mm, total height: 1,650 mm, This machine is designed for the production of wooden posts and stakes with a diameter of 40-140 mm. The length of the processed material is 1.2-6 m. The processing speed is 5-25 m/min. The first milling head has a diameter of 160 mm, and the second has a diameter of 140 mm. The material is clamped pneumatically. Hjdpszcd Agofx Af Hjnp

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Hodeubbryopfx Af Henp Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Year of construction: 2008, condition: excellent (used), Sorting system for small-diameter wood and stakes for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Hnedpfx Afowqdc Ro Hep Wood diameter up to approx. 12 cm. Ready for demonstration.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Sorting system for small-diameter wood and stakes Hnsdpfowqf S Hsx Af Hsp for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration.

Condition: used, functionality: fully functional, Wema Probst QF50 Cross-Mill Machine Cross-Mill machine for processing round timber with a swivel table for adjusting the milling angle. 2 machining stations 1 cross-milling unit Hnedpswc Tdnofx Af Hjp 1 drilling unit

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: Hodpfxsy Ni Ive Af Hsnp 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Hnodpfx Afoxxb Rre Hjp Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm Hjdpfx Aex D Tbmsf Honp ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,000 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 550 mm C-axis rotation: 360° Hedpszk Dv Usfx Af Henp Table length: 2,600 mm Table width: 550 mm Tool holder: ISO40 Main spindle power: 22 kW Spindle speed: 20 - 12,000 rpm Positioning accuracy: 0.01 mm Travel speed: 667 mm/s Number of axes: 4 MACHINE DETAILS Control system manufacturer: Siemens Power consumption: 24 kW Dimensions & Weight Dimensions (L x W x H): 7,500 x 3,700 x 2,500 mm Net weight: 9,600 kg Shipping packages: 2 EQUIPMENT Tool magazine External cooling Chip conveyor CE marking

Condition: ready for operation (used), Year of construction: 2002, operating hours: 22,347 h, functionality: fully functional, machine/vehicle number: 190347, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table load: 3,000 kg, controller model: Heidenhain TNC 430 B, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 3,000 mm Travel in Y-axis: 1,600 mm Travel in Z-axis: 1,500 mm Table size (2x): 2,000 x 2,000 mm Table load: 3 t Spindle speeds: 60 - 3,000 rpm Spindle mount: ISO 50 MACHINE DETAILS Control system: Heidenhain TNC 430 B digital Number of controlled axes: 6 Milling drive: 25 kW Total power consumption: 50 kW Dimensions & Weight Footprint: approx. 6.5 x 3 x 3 m Machine weight: approx. 26 t Hnjdpfx Afjzku Sgo Hop Program runtime: 22,347 h EQUIPMENT Integrated coolant system (ICS) 40-position automatic tool changer Chip conveyor High-speed spindle (30,000 rpm) 2 pallets

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,616 h, functionality: fully functional, machine/vehicle number: 184640, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,500 mm, table load: 5,000 kg, controller model: Heidenhain TNC 430 B, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 3,000 mm Travel in Y-axis: 1,400 mm Travel in Z-axis: 1,500 mm Table size: 3,200 x 1,100 mm Table load: 5 t Spindle speeds: 60 – 3,000 rpm Spindle mount: ISO 50 MACHINE DETAILS Control system: Heidenhain TNC 430 B digital Milling drive: 22 kW Total power consumption: 50 kW Dimensions & Weight Space requirement: approx. 6.5 x 3 x 3 m Machine weight: approx. 22 t Program runtime: 25,616 h Machine operating hours: 53,291 h Control system operating hours: 55,029 h Hedezku R Aepfx Af Henp EQUIPMENT 20-position automatic tool changer Milling head can be swiveled and rotated automatically in 1.5° increments Chip conveyor Adaptable high-speed spindle (30,000 rpm) Mist coolant system

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, feed length X-axis: 445 mm, feed length Y-axis: 195 mm, feed length Z-axis: 415 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 75 rpm, quill stroke: 125 mm, table width: 240 mm, table length: 800 mm, Warco Milling Machine Model: Super Major Vario Year: 2018 Table Area: 800 x 240mm Long Travel: 445mm Cross Travel: 195mm Vertical Travel: 415mm Quill Stroke: 125mm Spindle Taper: R8 Spindle Speed: 75 – 2500 RPM Machine With: Vice Hsdpfxezlhtms Af Hjnp Dividing Head Some Tooling Stand Digital Readout Dimensions: 1270 x 930 x 2670mm High Weight: 500 KGS

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM Hjdpfxswtd Dye Af Hjnp FIDIA Control Power Draw Bar LOVO Light Coolant

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Hnjdpfsyhdi Rox Af Hsp Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: used, Butler Elgamill CNC Travelling Column Bed Type Mill x 5000mm T slotted Table 8,000mm x 1030mm Hjdpfoyx Hv Aex Af Hjnp Column travel X 6200mm TBC Ram travel Y 1250mm TBC Vertical travel of Head Z 1950mm TBC Spindle speeds Various and a Max of RPM TBC Spindle Taper 50 Spindle drive motor HP TBC Power feeds Horizontal and Vertical 6 – 500 mm/min Rapid power traverse to all motions 2,000mm/min Complete With: Heidenhain CNC Control Manual Indexing Head Machine Data: Machine weight 20,000kg

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Hnsdpfx Afsb Tmngo Hep Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.