Cross joint milling machine

Stegherr FD 35/7891

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. Lrjdpfxexrahce Adtjk 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: good (used), Year of construction: 2019, Throughfeed CNC machine FELDER GROUP FORMAT4 CREATOR 950 (year 2019) with glue and dowel insertion, 12 kW HSK-F63 milling unit, integrated Ø 120 mm saw, dowel unit, and feed speeds up to 90 m/min represents a compact solution for precise milling, drilling, and panel sizing of wood. Key Technical Advantages - Occupies only 5 m² of space Ideal for workshops with limited space. - Easy clamping and programming Fast and intuitive operation, even for less experienced users. - Compact, powerful, and fast Perfect for smaller workshops seeking professional results. Advanced Features - Glue and dowel insertion unit - 12 kW milling unit (up to 24,000 rpm) - Automatic workpiece length measurement - Automatic tool changer (linear tool magazine with 4 positions) - Drilling from all five sides - Groove cutting with integrated saw blade - Processing from all four sides of the workpiece - Door panel machining Drive Unit - Spindle: HSK F63 - Number of axes: 3 Travel Distances - X-axis travel: 3000 mm - Y-axis travel: 950 mm - Z-axis travel: 80 mm Tools - Maximum tool weight: 7.5 kg Worktable Ledpfxswyvgao Adtork - Table load capacity: 130 kg Additional Equipment - Online remote service support package - Automatic central lubrication PRICE EXCLUDES VAT.

Condition: good (used), 1200 m² steel construction platform Ljdpfxst Ivwxe Adtsrk Used goods, good condition, see pictures. Column grid approx. 10x6m Load per m² 800 kg Stairs, railings, transfer station, lift and much more available! Negotiated price: € Price on request! Partial sale and CAD planning possible. All plans and statics available. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Lredpfoxpi Dusx Adtsk Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Year of construction: 2007, condition: reconditioned (used), We have a SIGMA pick & place feeder available. Year 2007. The state of the feeder is exceptional. Not used very often. Lredod Nkpyjpfx Adtjk This feeder was installed on a Buhrs poly wrapping machine but can also be installed on other mechanical machines. Is meant for feeding plastic card and difficult inserts. The position of feeder is very precise with these type of feeders.

Condition: good (used), Year of construction: 1992, Chipper with hydraulic walking floor Lodpfjwv Hmvex Adterk Rotor width 700 mm Motor 11 kW Screen with 16 mm perforation No PLC installed yet Partially overhauled New rotor bearings

Condition: used, Year of construction: 1992, spindle diameter: 50 mm, milling spindle length: 545 mm, Longitudinal profile milling machine with lifting spindle 545mm long, diameter of lifting spindle D=50mm, motor 5.5kW. Lrjdpfjua Swwjx Adtok Glazing bead saw D=180mm, 2,2kW. Feed rate 2-4-6-12m/min

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 24 m³, loading space length: 4,900 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, HIRE PURCHASE * LEASING* FINANCING AT TOP CONDITIONS Iveco Daily 35S18HA8  MY24  Wheelbase 4100 mm, single rear axle wheels Color: white (Iveco 50105) EURO 6 Engine: capacity 3.0 liters Maximum power 176 HP (130 kW), maximum torque 440 Nm in the range of 1600 rpm, 4 cylinders in a row, Variable geometry turbocharger VGT Gearbox: 8-speed automatic Braking system: discs on both axles (ventilated at the front) Electrical installation: 12V, Tires / wheels: 225/65 R16C, single rear axle wheels Front suspension: independent with torsion bar integrated with the telescope Double acting shock absorber Rear suspension: rigid Beam, leaf springs with bumpers, stabilizer. Hydraulic telescopic shock absorbers Two-way action Axle pressure: front 1900 kg, rear 2240 kg Driving safety is ensured by the following systems: ESP 9, ASR, ABS, EBD, Hill Holder, MSR, HBA, LAC, TSM, RMI&ROM Above-average equipment: COMFORT PLUS: Lodovpcu Rjpfx Adtsrk ? NAVI MY IVECO infotainment system with 10-inch display ? Attack cruise control (ACC) with radar sensor ? Cabin ventilation and heating system with automatic air conditioning ? Padded comfortable driver's seat (3 adjustment levels, lumbar support, armrest) ? Front fog lights ? USB A+C socket on driver and passenger side ? Full headrests covered with memory foam, Daily logo ? Fixed 2-seater passenger bench with folding table, 3-point seat belts STYLE: ? Daily radiator dummy with chrome strip ? Leather steering wheel ? Full LED lights (day, dipped beam, road) Additionally, the price of the vehicle includes: 73024 - Side mirrors on the shoulders 2.35 m 06064 ? Double parabolic springs for models Building type: International.   Approximate dimensions: - Intr. length 5000 mm, - Internal width 2250 mm, - Internal height 2350 mm, Standard equipment: ? Intermediate frame with ground binding: aluminum stays + aluminum crosses ? Anodized aluminum sides with a height of 400 mm on Sunday, over 3600 mm length internal split buildings ? Climbs for quick disassembly and side loading ? Aluminum frame under the tarpaulin lined with impregnated wooden slats ? Flooring with 15 mm thick waterproof non-slip plywood ? Plastic wheel arches with anti-mud aprons mounted above the rear axle wheels ? Entrance step on the rear ? Front wall of the side + impregnated wooden boards ? Fasteners made of anodized aluminum ? Contour handles that prevent the load from moving during transport, the amount depends on the length of the installation ? Tarpaulin in any color, translucent roof (close with a cable) ? Foldable side anti-run slats (set) Additional equipment included in the price: ? 1-sided sliding tarpaulin with tension ? Sleeping cabin (TopSleeper) CARPOL ELKA ? Rolled rear tarpaulin ? Toolbox ? Water tank ? Auxiliary heater ? Rolling rear tarpaulin Welcome to carmax24 Today you have the opportunity to purchase one of our selected, tested vehicles. Expert-tested and high-quality vehicles ensure high customer satisfaction and have done so since 2008. This is our daily approach, because you as a customer are our number one priority at carmax24

Condition: as good as new (ex-display), Year of construction: 2019, 380 V Lrodpfx Adstgkwfotsk Pneumatic

Condition: excellent (used), Motor 7.5 kW 2 kW 0.37 kw Saw 450mm 30mm Lrsdpourt Hfofx Adtjk Spindle height 42cm The horizontal working width of the saw is 15 cm Electric feed Table width 32 m Pneumatic pressure