Metal cutting Tooling MANDELLI - 200

MANDELLI 200

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg Bdsdpeyg I Nfefx Al Ash

Condition: repair required (used), functionality: not functional, cnc lathe Bsdpfxjumlwxe Al Ajdh

Condition: excellent (used), Four-jaw chuck make Röhm Bedpfopk A A Hox Al Ajdh diameter 315 mm single adjustable jaws bolt circle 120 mm

Condition: excellent (used), Year of construction: 2012, Four-jaw chuck Manufacturer: Röhm Diameter: 315 mm Bolt circle: 120 mm Individually adjustable jaws Centering bore: 120 mm Bjdsfklf Ujpfx Al Aodh Pitch: 625/4 threads per inch

Year of construction: 1981, condition: good (used), Deckel FP1 2-axis universal milling machine with Heidenhain digital display and tilting table. SK 40 spindle connection. In good, operational condition. Machine can be demonstrated under power by arrangement. Bdodpfxehg Embo Al Aoh

Year of construction: 2015, condition: excellent (used), Three-jaw chuck Bdedpjd Th I Tefx Al Aoh Manufacturer: Röhm Diameter: 200 mm With individually adjustable jaws Short taper size: 6 Taper diameter: 106.390 Bolt circle diameter: 133.4 Weight: 24.5 kg Year of manufacture: estimated

Condition: used, Year of construction: 1989, centre distance 2000 mm 600 weight of the machine ca. 3,2 t Passage 49 mm Bedpfx Alsyi Hvvj Asdh Digital Lynette

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Paint Finish in Light Grey, CE Compliant!!! Technical Specifications: - Year of manufacture: 1987 Machine no.: 2203-2790 - Rigid angle table (freshly planed) - Spindle speed: 50–2500 rpm - Feed rate: 8–630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel X/Y/Z: 500/400/400 mm - Vertical milling head on column adjustable by 150 mm - Vertical and horizontal quill – SK40 - Vertical quill extendable by 90 mm - Drawbar thread: M16 - Weight approx. 1500 kg Accessories & Features: - 3-axis Heidenhain digital readout - Coolant system - Chip tray Bdjdpoxctyasfx Al Aeh - Central lubrication system About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine has been partially overhauled, displays minimal backlash on the handwheels, and all lead screws move smoothly and evenly. Even at maximum speeds, the milling machine runs quietly. Rapid traverse is available on all axes; all bellows are new. The rigid angle table has been freshly planed. This is a reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Condition: used, Year of construction: 1996, greates pass round over bed 350 mm swing diameter over face slide 200 mm centre distance 800 mm centre height 175 mm turning length 700 mm 3-jaw chuck Röhm Ø 160 spindle bore 46 mm spindle head Gr. 5, DIN55027 number of spindle speeds 18 spindle turning speed range 31,5-2500 U/min tailstock quill taper MT 3 weight of the machine ca. 1000 kg Joystick control 3-axis digital display Rotating center point Chip guard Multifix tool holder, size E, with 3 interchangeable cassettes Adjustable machine feet Coolant system Worklight Operating instructions included Bedpsy Ez Dzofx Al Ajdh Very good condition, The machine comes from a training workshop at a large corporation

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and stepless feed, in very good CONDITION, CE compliant Technical Data: >> Year of manufacture: 1992 Machine No.: 2102-6209 >> Fixed angle table (newly planed) >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Equipment: Bsdpfx Aexdi Ivjl Aedh >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts plan About the machine: For sale is a universal milling machine Deckel FP1 with CE certification, in very good condition. The machine has very minimal backlash and all spindles can be moved easily. Even at maximum speed, the milling machine runs very smoothly. A special feature is that the control cabinet is connected to the machine via a plug, making transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine features rapid traverse in those axes as well. Another great advantage is the active 3-axis digital readout. With this Heidenhain path control, you can input dimensions, and the machine will automatically move to them. The FP1 was previously located in a training facility, where it was only used occasionally. The oil was changed, and the machine has been mechanically and electrically inspected. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to inspect and test this machine under power at our premises.