Rubber Injection 'Molding Machine

Maplan MA/22

Year of construction: 2003, condition: good (used), functionality: fully functional, Equipment: documentation/manual, ITALMATIC Autoclave AIT ø 2600x5000 year 2003, in good condition, available now, fully functional P.S.: 13 barg Gsdpfxoy N Ubbs Aqiebr Tmin/Tmax: +20 / +175 C Volume V: 33900 litres Fluid group 2: AIR Module: B+F Test Pressure TP: 20,7 barg CAT.: IV Inspection is possible by appointment.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Gbodpfx Aqorq Hmzoisr Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: repair required (used), Year of construction: 2003, Rubber injection molding machine, REP brand 25 tons Year: 2003 All four columns need to be replaced (estimated cost: €9,000). Gjdpfxeizi H Hs Aqiobr

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Model: C6 Working Area: 6100mm*2500mm Laser Output Power: 40kW/30kW/22kW/20kW/12kW/6kW/3kW/2kW/1.5kW Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 110m/min Max. acceleration: 1.5G 1.Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 2.One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 3.No Quiver when Cutting Thin Sheet C Series is capable of cutting edges of thin sheets and ensures no quivering marks. 4.Stretching Aluminum Crossbeam Rigidity increases by 60% Weight goes down by 20% Equipment running speed increases by 50% Ytyixk Gjdpfx Aog D Ntxeqiobr 5.Welded Bed with Tenon-and-mortise Joint Each frame of the bed is welded after mortise-and-tenon joint to achieve better stability and firmness.

Condition: like new (used), Year of construction: 2020, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, number of injections: 1, Excellent rubber injection moulding machine in mint condition, year 2020. Very few operating hours, in mint condition. Closing force 600 tons Injection volume 2500 cc Heater blades 1200 x 1300 mm FIFO injection system 2500 bar Core lifting moving plate Gbjdotu H Stopfx Aqijr Core lifter fixed plate Data backup on CF card Energy reduction by servo pump control

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 Godpfx Aqof A R Uhoiobr 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ Gbodpfx Asu Nu Nksqisr -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Godpfx Aqjxrc Eqjijbr Main Technical Data: Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Condition: ready for operation (used), functionality: fully functional, Rubber extrusion line for production of rubber extrusion profiles Gsdeyn Ec Eopfx Aqisbr

Condition: like new (used), Year of construction: 2021, operating hours: 730 h, functionality: fully functional, clamping force: 2,700 kN, nominal power: 22 kW (29.91 HP), operating pressure: 265 bar, We offer this like-new DESMA D 969.250 Z (S3) rubber processing machine, manufactured in 2021. Closing force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short-circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive flow rate: 72/39 l/min Pump drive power consumption: 32.0 A Pump drive power: 22 kW Nozzle system force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Operating hours: hydraulic motor: 730 hours, hydraulic pump (closing force): 65 hours, operating system: active 3,360 hours Ideal for the production of: • technical rubber molded parts • seals and O-rings • automotive and industrial components Condition & Availability: Gbjdpfozgvxysx Aqier • Machine is available for immediate delivery • Condition: very well maintained / regular servicing • Inspection possible by arrangement Other: • Documentation and accessories available on request • Assistance with disassembly / loading / transport can be arranged If you have any questions or require further information, please send us a message or call us.