2017 Mazak Integrex I 200 S
Mazak Integrex I 200 S

Name: Mazak Integrex I 200 S
Brand: Mazak
Availability: InStock

Year of construction

2017

Condition

Used

Location

Sweden

2017 Mazak Integrex I 200 S Mazak Integrex I 200 S

Show map

Machine data

Machine type:: 2017 Mazak Integrex I 200 S

Manufacturer:: Mazak

Model:: Integrex I 200 S

Year of construction:: 2017

Condition:: used

Price & Location

Location:: Sweden

Call

Details about the offer

Listing ID:: A20746552

Reference number:: 4855

Update:: 12.12.2025

Description

New spindel 2025-08

yearly service by Mazak Servicecenter.

includes bar feeder Super 80

Max swing Ø 658 mm

Swing over X-slide Ø 658 mm

Swing when Y-axis is operating Ø 658 mm

Max turning diameter Ø 658 mm

Max turning diameter from bar Ø 51 mm (option Ø 65)

Max part length 1011mm

X axis: 615mm

Y axis: +/-130mm

z axis: 1077mm

B axis: 0,0001Deg / 240°

Spindle 1

Spindle nose JIS A2-6

Spindle bore 76 mm

Through-hole 51 mm (option Ø 65)

Spindle motor AC 22 kW 40% ED

Speed range 35-5000 rpm

Number of speed ranges Direct drive

Max torque 467 Nm 25% ED
Njdpex Hfl Ejfx Afhjwb

Max part weight including chuck 300 kg

Center height from floor 1235 mm

Spindle 2

Spindle nose JIS A2-6

Spindle bore 76 mm

Through-hole Not applicable (option Ø 65)

Spindle motor AC 18.5 kW 40% ED

Speed range 33-5000 rpm

Number of speed ranges Direct drive

Max torque 325 Nm 40% ED

Max part weight including chuck 300 kg

Center height from floor 1235 mm

C-axis 1 Type Direct drive Rapid feed 555 rpm

Working feed 1-5000 degrees/min

Minimum programmable increment 0.0001 degree

C-axis 2 Type Direct drive Rapid feed 555 rpm

Working feed 1-5000 degrees/min

Minimum programmable increment 0.0001 degree

W-axis Movement 1066

Rapid feed 30 m/min

B-axis B-movement 240 degrees

Max machining feed (ISO) 40 rpm

Minimum programmable increment 0.0001 degree

Tool Holder Type: Tool changer

Tool Shank Size: 25 x 25 mm

Tool Change Time, tool to tool: 1.3 seconds

Chip-to-chip time, average: 8 seconds

Tool Holder for rotating tools: Capto C6

Tool Holder for turning tools: Capto C6

Max Tool Weight: 12 kg

Max Tool Length: 400 mm

Clamping Force for Tool (Capto C6): 33 kN

Tool Magazine: Number of tool positions: 36 pcs

Max Tool Diameter: 90 mm

Max Tool Diameter when the position before and after is empty: 125 mm

Max Tool Length: 400 mm

Max Tool Weight: 12 kg

Max Torque for Tool: 9.8 Nm

Other:

Length: 3990/4910 mm

Width: 2800 mm

Height: 2720 mm

Weight: 13100/16600 kg

Power Requirement, continuous: 72.34 kVA

Air Requirement, min: 5 kg/cm², 410 liters/min

Tool Magazine: 36 tools

Standard Equipment:

B-axis

Capto C6

ATC Auto Recovery

Auto power on/off, heating schedule

19” LCD touchscreen

Mazak tool identification system including 10 ID chips (for Capto C6)

Measurement arm for tool length setting, automatic compensation, and tool breakage detection

8” Chuck Type: Kitagawa B208A6

8” Chuck Type: Kitagawa B208A6

Coolant Tank

Coolant Pressure for Upper Turret: Max 5 bar, 23 l/min

Set of Manuals: (digital)

Smooth Standard Software:

Mazacc 2D software (shape comp)

Mazacc 2D software för roterande axlar (shape comp)

Mazacc 3D High Speed software

High Smoothing Control

Seamless Corner Control

Variable Acceleration Control

Ultra High Speed Machining Mode

Rapid Overlap

ISO/EIA Programming:

Lathe and milling spindle start unsynchronized

Synchronized threading with rotating tools

Macro interruption allowing event-driven ISO/EIA programs

Macro programming with 600 additional variable pairs for ISO/EIA

Helix interpolation for ISO/EIA

Coordinate rotation with G68 for ISO/EIA

Polar coordinates, G122 for ISO/EIA

Synchronized interpolation X-C-axis G12.1 for ISO/EIA

Coordinate systems G54 - G59 + 300 additional for ISO/EIA

Direct input of drawing dimensions, e.g. starting corner for ISO/EIA

Inverse Time Feed (G93)

3D Cutter Compensation (G40-G42)

Seller

Registered since: 2018

11 listings online

Call

Send inquiry

Telephone & Fax

+46 16 40... show

These listings may also fit your interest.

Listing

Vertical machining center FANUC Robodrill α-T21iFa

Zuchwil

1,186 km

Vertical machining center
FANUCRobodrill α-T21iFa

Call

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Nodpfoxflxajx Afhjwb Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.

See details

Listing

Vertical machining center HERMLE C 500 V

Sedliště

1,596 km

Vertical machining center
HERMLEC 500 V

Call

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (min.): 16,000 rpm, The machine is in good technical condition, featuring a Heidenhain TNC 426 control system, a magazine for 20 HSK 63 tools, including a probe + 4th axis. Nodpfx Aoxfg Ayjfhewb

See details

Listing

Nitrogen generator Airtech Stickstoff GmbH Parker n2-20-80

Lübbecke

860 km

Nitrogen generator
Airtech Stickstoff GmbH Parkern2-20-80

Call

Year of construction: 2023, condition: new, Nitrogen self-generation plant for the production of a wide range of purities, pressures and volume flows. Consisting of high-quality components, such as filters, adsorbers, nitrogen separation unit of the company Parker Hannifin and the compressor manufacturer Käser. If you need high pressure compression we cooperate with Bauer Kompressoren. More than 400 units have been installed at our customers. Gz7iapb Nwjdpfenq Di Tex Afhob All plants are assembled by us and adapted according to your space conditions and needs. We also plan and realize container plants for outdoor and indoor installation. We are looking forward to your inquiries...

See details

Listing

Universal machining center DMG MORI DMU 60 evo

Trittau

913 km

Universal machining center
DMG MORIDMU 60 evo

Call

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Nsdpfx Afoxgnz Tjhjwb Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

See details

Listing

Schömberg

1,156 km

Machining center
HERMLEC30 U

Call

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe Nwsdpfx Afjxcp Slohsb - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

See details

Listing

CNC turning and milling center MORI SEIKI NZ 2000 T2Y2

Borgo San Dalmazzo

1,454 km

CNC turning and milling center
MORI SEIKINZ 2000 T2Y2

Call

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS Njdpfx Afewlvlgehewb X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacturing: 2010

See details

Listing

Grinding wheel dressing machines Farman FC 250 WF

Cloppenburg

800 km

Grinding wheel dressing machines
FarmanFC 250 WF

Call

Year of construction: 2024, condition: used, Grinding wheel holder:: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm Nwodpfx Afolfil Sehsb max. width of grinding wheel: 70 mm Grinding wheel bore diameter: 20 mm Speed of the diamond / CBN disc spindle: infinitely variable 100 - 1000 rpm., Radius of the grinding wheel: 0-30 mm Dimensions of the dressing wheel: 180 x 25 x 31.75mm, Speed of rotation of the dressing wheel: 200 - 2000 rpm., Oscillation stroke of the dressing wheel: 0-70 mm Connected load of the motor of the dressing wheel: 2,2 kW Weight approx: 1400 kg Dimensions L x W x H: 1850x2300x2100mm, Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure. Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel), Wheel motor strengthened to 4 kW, Dressing wheel motor strengthened to 2,2 kW, 2 Machine lights 12 V, Optical linear scale with digital display counter (0,001 mm) X, Z Axes, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included), High performance swivelling angle reader (0,05°), Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm, Stepless oscillation speed, Automatic central lubrication, SIC Wheel dresser manual,

See details

Listing

Oberhausen

804 km

Machining center
LAGUNL 5AX - 410

Call

Condition: new, BRAND NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control with 19" screen HEIDENHAIN package (motors, measuring systems, and handwheel) Nodpfx Aohy Artefhowb X-axis: 650 mm Y-axis: 700 mm Z-axis: 645 mm Table size (diameter): 410 mm Maximum workpiece diameter: 500 mm Maximum spindle speed: 12,000 rpm (oil-cooled with MQL) Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 17 kW ICS – internal coolant supply – 20 bar Rapid traverse X, Y & Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC tool changer with double gripper: 30 positions (optional up to 80 tools) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will be answered.

See details

Listing

Halberstadt

1,029 km

CNC milling machine
DMGDMU 210 P

Call

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Njdpfxex R R Hco Afhewb Clamping Area: 1.700 mm Tool Taper: SK 50 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Internal cooling: 40 bar Holding torque: 22.700 Nm Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

See details

Listing

CNC Lathe with c-axis Okuma - LB 3000 EX Okuma LB 3000 EX-II

Babberich

740 km

CNC Lathe with c-axis Okuma - LB 3000 EX
OkumaLB 3000 EX-II

Call

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Nwsdpfx Afjx I Nbteheb Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Advertise here