5-axis machining center

MIKRON HPM 800 U

Condition: used, Year of construction: 2012, functionality: limited functionality, operating hours: 43,100 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain iTNC530, controller model: 530, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, rapid traverse Z-axis: 61 m/min, rapid traverse X-axis: 61 m/min, rapid traverse Y-axis: 61 m/min, MIKRON HPM 800 U Year of manufacture 2012 5-axis A-axis -91°/121° C-axis 360° Spindle 20,000 rpm Heidenhain iTNC530 control system Blum laser for tool measurement and breakage detection Infrared measuring probe 210 tools - HSK 63A Hsdpfxowa Alie Abdsi 7-position pallet changer Knoll high-pressure system 70 bar, 23 L/min Knoll scraper belt chip conveyor

Condition: used, Year of construction: 2019, functionality: fully functional, CNC SMOOTH G, travels 730 x 730 x 730 mm, 2 pallets 500 x 500 mm, spindle speed 18,000 rpm, 120-tool magazine, max. workpiece diameter 800 x 1000 mm, rapid traverse 60 m/min, through-spindle coolant 15 bar, RENISHAW preparation, NC rotary table with 360.00 positions, CONCEP conveyor. Hjdpfexcvycjx Abdei

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide Hodpfx Absrz Nflodji - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: excellent (used), Year of construction: 1989, Philips CNC 432 control Travel paths X/Y/Z 600 x 400 x 450 mm Spindle speed 4,000 rpm Hjdpfx Aboxc N Iyjdsi 20-position tool magazine SK 40 4th axis Lehmann

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, nominal power (apparent): 10 kVA, overall weight: 6,500 kg, spindle speed (max.): 20,000 rpm, Heidenhain TNC530, 4th axis rotary table spindle 20,000 rpm, HSK 63 table 850x530 mm travels 600x450x450 mm Hedpfx Ajw Dc Irsbdei 30-tool changer weight 6,500 kg

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,150 mm, table load: 4,000 kg, Magnum: powerful machining in machine construction and tool making Sk50 with extremely powerful spindel 50kw Glas scales in X/Y/Z Chip conveyor and coolant system Hodpowycmmsfx Abdsi X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4000 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 50kW Speeds / ranges: 4500Rpm ATC / revolver: 50 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 8000mm Width: 5000mm Height: 3700mm Weight: 30000kg

Condition: used, Year of construction: 2012, operating hours: 5,991 h, functionality: fully functional, machine/vehicle number: 11415584024, For sale is a 5-axis CNC machining center DMG MORI DMU 50, year of manufacture 2012, equipped with Siemens control. The machine is in good, well-maintained condition and was in operation until recently. An on-site inspection under power can be arranged at any time by appointment. The DMU 50 is a vertical machining center with an integrated NC rotary/swivel table, ideally suited for precise 5-axis complete machining of complex workpieces. Typical areas of application include tool and mold making, manufacturing of precision parts, as well as prototypes and small to medium-sized series. Technical Data (excerpt): Manufacturer: DMG MORI / Deckel Maho Model: DMU 50 Machine type: Vertical 5-axis CNC machining center Year of manufacture: 2012 Control: Siemens Number of axes: 5 simultaneous X travel: approx. 500 mm Y travel: approx. 450 mm Z travel: approx. 400 mm Spindle: vertical motor spindle, up to approx. 14,000 rpm Tool changer: automatic, approx. 30 tool stations Country of manufacture: Germany Worktable Simultaneous rotary/swivel table Control 3D control Siemens 840D solutionline Main drive Spindle speed up to 14,000 rpm SK40 Tool magazine Tool magazine 60 positions SK40 vertical chain Automation / Measuring / Monitoring Infrared probe TS649 DMG Direct measuring systems X/Y/Z Coolants / Chip disposal Coolant-air blast switch Rinsing gun for chip cleaning SIEMENS control options Electronic handwheel General options Operating mode 4 Second cabin door Special features Rotating viewing window (S-K3008) Operating hours (according to meter): Machine hours: approx. 31,987 h Spindle hours: approx. 10,489 h Hsdpfx Abex S D N Todei Condition & Scope of delivery: Used, fully functional, regularly in operation. Scope of delivery includes the machine as shown, additional accessories by arrangement. Other information: Location: Birkenfeld (75217)

Condition: excellent (used), Year of construction: 2012, CNC lathe 2 axes DMC Korea DL22 Fanuc OiTD with Manual Guide and USB port year of manufacture 2012 Hjdjxyaulopfx Abdsi 8-inch chuck Spindle bore 65mm Turning length 400mm 12-position tool turret Tailstock Coolant tank with pump

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Hodpfx Aboph Uk Nedoi Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, Measuring Range X – axis 1200 mm Y – axis 2000 mm Hedpfx Aedv I Abebdei Z – axis 1000 mm Accuracy acc. ISO 10360 E = [2,6 + 4L/1000]µm DCC controller Renishaw UCC S5 JS box Renishaw MCU-5 (wireless on demand) Temperature sensor Renishaw Probe system Renishaw REVO 5-axis scanning probe Probe changer Renishaw (price REVO system new appx. € 80.000,--) Application software Inspect3D Inca V6 avzula version built 2014, retrofit 2017 with Revo