Palett carrier

MIKRON HSM 400

Year of construction: 2005, condition: excellent (used), MIKRON HSM 400 U high speed machining center The exact scope of the offer can be seen in the photo gallery. Included are among others: Measuring probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, belt filter system, approx. 50 HSK tool holders etc. 1. TECHNICAL DATA Working area X axis: 400 mm Y axis: 450 mm Z-axis: 350 mm B-axis: +-110 ° C axis: 360 ° Working spindle Speed range: 100 - 42`000 rpm tool holder: HSK E 40 spindle power at 40 % ED: 13 spindle power at 100 % ED: 10 Torque at 60 % ED: 4,25 Torque at 100 % ED: 3,2 Lubrication: oil/air Feed rate Rapid traverse speed: Max. 40 m/min Dcjdpfjigrf Iox Ac Njg B axis: 150 rpm C axis: 250 rpm Axis acceleration, XYZ: Max. 1g (10 m/s2) B axis: 100 rad/s2 C axis: 300 rad/s2 Tool changer: 68-fold Chip to chip: 12.5 s Tool change time: 10,0 s Work table: 120 mm Max workpiece diameter that can still be rotated 360 °: 230 mm Max. Workpiece height: 350 mm Max. Workpiece weight: 25 kg Control: Heidenhain iTNC 530 Weight: 5500 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch Dodjylw Stspfx Ac Nocg • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U The machine is defective and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Dedjyzt A Uepfx Ac Nscg

Condition: good (used), Year of construction: 2006, 1. TECHNICAL DATA Working area X axis: 400 mm Y axis: 450 mm Z-axis: 350 mm B-axis: +-110 ° C axis: 360 ° Working spindle Speed range: 100 - 42`000 rpm tool holder: HSK E 40 spindle power at 40 % ED: 13 spindle power at 100 % ED: 10 Torque at 60 % ED: 4,25 Torque at 100 % ED: 3,2 Lubrication: oil/air Feed rate Rapid traverse speed: Max. 40 m/min B axis: 150 rpm C axis: 250 rpm Axis acceleration, XYZ: Max. 1g (10 m/s2) B axis: 100 rad/s2 C axis: 300 rad/s2 Tool changer: 68-fold Chip to chip: 12.5 s Tool change time: 10,0 s Work table: 120 mm Max workpiece diameter that can still be rotated 360 °: 230 mm Max. Workpiece height: 350 mm Max. Workpiece weight: 25 kg Hfsbrjigrf Ie Icm Ener Dcjdjx H Ntaopfx Ac Nog Control: Heidenhain iTNC 530 Weight: 5500 kg

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS Dcsdsvvlmcopfx Ac Nsg -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller model: iTNC Heidenhain 530, spindle speed (max.): 42,000 rpm, swivel angle C-axis (max.): 360 °, number of axes: 5, No minimum price – guaranteed sale to the highest bidder! The lot consists of 2x 5-axis HSC machining centers and pallet system with robot MIKRON HSM 600 U (serial number: 217.88.00.070) TECHNICAL DETAILS Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / –110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): 217 Nm max. Clamping torque: 1,400 Nm B-Axis Swivel range: +30° / –110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load capacity: max. 120 kg Tool magazine: 68 stations Control: Heidenhain iTNC 530 Workpiece weight: max. 120 kg EQUIPMENT Rotary tilting table with Erowa UCP MIKRON HSM 400 U (serial number: 217.87.00.178) TECHNICAL DETAILS Travel X-axis travel: 400 mm Y-axis travel: 240 mm Z-axis travel: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ±110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): 217 Nm max. Clamping torque: 500 Nm B-Axis Swivel range: ±110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): 686 Nm max. Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load capacity: max. 25 kg Tool magazine: 36 stations Control: Heidenhain iTNC 530 EQUIPMENT Rotary tilting table EROWA ROBOT MULTI TWIN Gripper station: 6 stations Grippers: various Storage system Rotary storage: 5 levels Level allocation Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 Dcsdpfx Aex Hx T Aoc Neg GENERAL EQUIPMENT Absolute measuring systems on all axes Infrared touch probe LASER Electronic handwheel for setup mode Graphite dust extraction 2x BURN WK 5806 Rotary pallet storage

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Multi-sensor coordinate measuring center in top condition with warranty and guarantee extensive services Hexagon Optiv 442 multisensor meter equipped with camera, laser and Renishaw probe system. Djdpfjdyc Uasx Ac Njcg · Measuring range single sensor: 410x410x200mm · Dimensions: 1232x910x1663mm · Weight: about 940kg · Max. Load weight: glass plate 30kg · Accuracies: U1 = 1.9 + L / 200; U2 = 2.4 + L / 150; U3 = 2.9 + L / 100 (L = measuring length in mm) · Max. Traversing speed per axis: 200mm / s · Incl. Camera with 2-step zoom · Incl. Laser · Incl. LED ring light · Incl. Renishaw 6-fold button changer · Incl. Renishaw TP200 touch probe · Incl. New frame grabber (Eagle) · Incl. 2-monitor operation · Incl. Windows 7 Ultimate evaluation station · On request including transport, commissioning and calibration

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Dcjdpfx Ajrpn Dvec Neg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Dcodjd Tiu Espfx Ac Nog Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 Djdpfx Acjycuuyo Nscg • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.