Miwe Condo 4-6080

Miwe Condo 4-6080

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, POLY-CLIP RCA Knsdpfx Ahetrf Ege Uef ID.NO. 2708 Poly-Clip mod RCA automatic double clip machine handles calibers from 25 mm - 55 mm both natural casing & collagen casing. Pipe that comes with is 24 mm + associated brake. Dimensions 100 x 80 cm Height 195 cm.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm Kedpfshzbipjx Ah Uenf - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Kjdpfxjdnxydo Ah Ujnf Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Ksdpfx Aowrb U Toh Uenf

Condition: like new (used), Miwe Condo stonefloor oven 60x80 with proofer in good working condition for more infused please send an request Kedpfx Aheumkx Io Usnf

Condition: excellent (used), Type: GS510 Kodpfx Ahot Tadte Uenf Serial number: Y6242 Capacity: up to 4000 kg/h Block cross section: max 500 x 300 mm Infeed height: 1750 mm Power: 3 x 380V, 50Hz, 18.5kW Dimensions: 1700 x 1800 x 2100 mm Weight: 1000 kg With lifter for frozen blocks

Condition: good (used), 522 USED Sveba Dahlen bakery, trolley, rotary oven. Kjdpoikf Iujfx Ah Uenf EXTERNAL DIMENSIONS (in cm.) - W: 145 - L: 160 - H: 260 TECHNICAL DATA - dimensions of the trolley: 60/80 EQUIPMENT: - gas or oil burner, - 2 trolleys. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: ready for operation (used), Chamber depth: 750mm, sealing bar configuration 2x 650mm per chamber, built-in, electrical connection 3 x 400/415V 50Hz, 3 x 220V 60Hz, weight approx. 650kg (with 300m³/h vacuum pump), packaging speed approx. 2–3 cycles/minute. Length: 1600mm, width: 1055mm, height: 1045mm, weight: 650kg. An on-site inspection is possible. Knjdpfx Ahjw Nq Sbo Ujf

Condition: excellent (used), Year of construction: 2006, Type: AV250 Serial number: 06090-1 Year of construction: 2006 Hole plate diameter: 250 mm Hopper: 800 litres Power: 3 x 400V, 50Hz, 78kW Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg Kedpfx Ahsttzdqs Usnf 3 speeds on feed screw, 2 speeds on working worm

Year of construction: 2025, condition: new, functionality: fully functional, Lillnord fermentation retardant Maryline Model: KR 103-81 T Touch screen computer control Temperature range from max. -3°C to + 45°C Humidity from 60% to 90% RH for max. 30 trays 600 x 800 mm Knedpfx Ask Iti Neh Ujf or 60 trays 600 x 400 mm Cooling unit ready to plug in above Coolant R 134A / cooling capacity 803 watts PID regulation of humidity and temperature Water connection 3/4 inch stainless steel version Connection 400V, 4000 Watt, 10A, 16A-CEE plug Dimensions: 810 x 1030 x 2290 mm, WxDxH New device Option: - Door with thermal window - CO2 vaporizer - FlexBaker with ready-fermented products - Aggregate external Lillnord service partners