Plastic silos, 12 units

Motan Silos

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 2 identical machines available, year of manufacture 2021. The machines were only operated for a short period in test mode in a large warehouse, then professionally dismantled and stored. Therefore, they remain in very good, fully functional condition. Full documentation for the machines is available. The XF / XP 111 M is a fully automatic strapping machine with a top-mounted sealing unit. It was designed to vertically strap a high volume of pallets of varying sizes with PP or PET strapping. This system is reliable, easy to operate, and can be installed in confined spaces thanks to its compact dimensions. - For PP and PET strapping Bedpfx Aajw Htz Ijaoda - Vertical strapping - Tension up to 5,500 N - Siemens PLC S7 - Compact design, minimal space requirement - Easy access to all mechanical components - Simple operation via touch screen The machines have been properly dismantled and stored – they are available immediately. Additionally, 90 brand-new rolls of original Cyklop strapping material, still sealed in their original packaging, are also optionally available.

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Bsdpotyaypefx Aaaeda

Year of construction: 2021, condition: ready for operation (used), A silo system consisting of 3 storage silos, 1 weighing silo and conveying units is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, storage silo volume: 32.6m³, weighing silo volume: 13.8m³. Storage silo capacity at 0.2t/m³: 6500kg, weighing silo capacity at 0.2t/m³: 2800kg. Storage silo dimensions X/Y/Z: 4200mm/4200mm/4200mm, weighing silo dimensions X/Y/Z: 3000mm/3000mm/3400mm, control: Siemens S7. Including steel frames, gate valves, full and demand indicators, filter bags, filling line, conveying and dosing system, rotary valves and gate valves. Documentation available. On-site inspection is possible. Bjdpfx Aov Ip Steaaoda

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. Bodpfjtpf N Uex Aaajda - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210

Year of construction: 2022, condition: like new (used), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 RAFFRED. Bsdjvhb S Sjpfx Aaaeda GMP150+2xPTUN2000 COOLING SYSTEM As good as new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following parts. - Hopper. - Holding frame. - Heating chamber. - Connection lines. - Air control valves.

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Year 1992 Scrow 32 Bodpfx Aaouh U Izjajda Spray weighted 123g

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Bdodpjh Akm Tjfx Aaaoa

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones Bdjdpjuhpiysfx Aaasa - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Bedpfx Aetmugceaasda Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: new, Year of construction: 2023, operating hours: 50 h, Brand: Dr.Boy Model: 60E Year of construction: 2023 Operating hours: 50 Screw diameter: 32 mm Max. injection pressure: 2,142 bar Max. shot volume: 100.5 cm³ Clamping force: 60 t Max. distance between tie-bars: 360 x 335 mm Min. mould height: 250 mm Max. distance between platens: 650 mm Dimensions: 3,450 x 1,150 x 1,950 mm Weight: 2,250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + licence fee) • 4 Freely programmable AIO's • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed and moving platen – 8-way water manifold – Ejector with quick coupling – Open nozzle with threaded tip • 6-way energy distribution box (supply via second cable) Bdodpfx Ajx Aphtjaaja – 3x 400V – 3x 220V • Oil filling (Econfluid, ISO-32)