Used 2 Colour Press for sale (84,576)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties. Bsdpfx Aijy Uiyvohswp

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Bodpoy Uc Nkofx Aihewp Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: new, 88 degree press brake punch of amada/promecam style R0.8mm, H120mm, L835mm, Bjdpein I D Esfx Aihewp L835mm segmented

Condition: used, -CLIREF Chilled Water Unit -Type: DRLBY64 -Serial No.: 3663 -Number of compressors: 2 -Type: Semi-hermetic -Power: 70 kW -Voltage: 380 V -Frequency: 50 Hz -Year: 1984 -With 1 forced-air condenser -Brand: Copeland -Type: D6DA3500A -COPELAND SEMI-HERMETIC COMPRESSOR D6SH-3500 -Serial number: 2010J4262 Bwedpfx Aow Dvcpoihop -Type: Semi-hermetic piston -Number of cylinders: 6 Are you looking for an efficient cooling system? Have you considered installing a chilled water unit? We offer you an overview of this cooling production system, which is more economical and environmentally friendly than conventional air conditioners and other industrial process cooling systems. A chilled water unit (also called a chiller) is an indirect expansion cooling system. This means it uses an intermediate fluid to transfer “cold” to the emitters. There is no refrigerant circulating through the system: in the case of a chilled water unit, water (pure or glycolated) serves as the intermediary fluid, used here as the heat transfer fluid. This cooling solution is suitable for both industrial process cooling and residential air conditioning applications. Relevant specifications: -Displacement [m³/h]: 106 -Locked rotor current [A]: 304 Iiedcusw Dvcps T Rxiei -Max. operating current [A]: 63.3 -Weight [kg]: 240 -Oil charge: 4.3 dm³ -Power supply: 400V/3Ph/50Hz -Quantity: 02

Condition: good (used), Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch, pressure switch, volumetric flow controller, differential pressure controller, pressure reducing valve Bedjiq Th Sjpfx Aihjwp -Manufacturer: Samson, differential pressure regulator 2-6 bar -Type: 2440 Rg5 1/2 PN25 -Control valve: Samson Rg5 -Number: 1x controller available -Price per piece -Dimensions: 270/95/H90 mm -Weight: 1.2 kg/pc.

Condition: good (used), Year of construction: 2007, Boge S20 - 2 Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped. Bjdpfxjwlc Tks Aihewp Discharge pressure: 10.00 bar Motor power: 15.00 kW Free air delivery: 2.24 m³/min

Condition: used, Year of construction: 2015, 20 Ft. Shipping container equipped with screw compressor installation with 2 Ingersoll Rand R30I-A10 screw compressors of 30 kW each. Bwodpfxowbf U Nj Aihsp

Condition: used, Year of construction: 2009, 2 GEA NH3 refrigeration compressors with frequency control (from a refrigeration system with max. 180 kW) Capacity: 145 m³/h each Bwsdpfsxzqtnox Aihsp Additional title: Refrigerant NH3 Capacity: 145 m³/h Power: 37 kW Weight: 132 kg Position: Screwed onto concrete base Features: 2 x compressors: 145 m³/h, 26 kW with frequency converter, 37 kW rated power

Condition: used, This listing is for a Molecular Devices ClonePix 2 2019 with Compressor Bwjdpfx Aisxzg I Iohop The Molecular Devices ClonePix 2 Mammalian Colony Picker is a fully automated system for the selection of high-value clones used in antibody discovery and cell line development. The ClonePix 2 picker enables a picking speed of greater than 10,000 clones per day making it 10 times faster than labor-intensive limiting dilution and FACS. The ClonePix 2 by Molecular Devices features multiple detection methods, integrated plate storage, animal-free media and reagents, sterility maintenance, and discrete colony formation

Condition: good (used), 5/2 Pressure Booster Bodpfx Aisb A Sibshowp -Type: DPA-40-10 537273 -VN: 43 -1: 2.5-8 bar 2: 4.5-10 bar -Weight: 1.5 kg

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Bedpfolf Ek Djx Aihswp

Condition: good (used), Year of construction: 2002, Boge S61-2 Bwodsxdhlgspfx Aihjp Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped. Discharge pressure: 10,00 bar Motor power: 45.00 kW Free air delivery: 6,10 m³/min

Year of construction: 2018, operating hours: 11,000 h, condition: good (used), functionality: fully functional, For sale is a highly efficient pressure fumigation system for chemical-free pest control in stored goods. The system utilizes proven CO2 pressure technology to reliably eliminate insects, larvae, and eggs in food products, raw materials, or textiles. Ideally suited for organic operations, mills, spice processors, or textile warehouses. Your advantages at a glance: 100% organic & residue-free: Uses natural carbon dioxide (CO2) instead of chemical agents – no risk to humans, the environment, or end products. Highly effective: Destroys pests at all developmental stages (egg, larva, pupa, adult) through oxygen deprivation and physical pressure. Gentle on products: Taste, appearance, and valuable ingredients of the goods are fully preserved. Versatile use: Suitable for grains, spices, tea, nuts, dried fruit, as well as textiles and packaging. Dimensions: L x W x H per chamber 11.80 m x 3.40 m x 3.10 m Weight: Bwjdpjyxm Ufsfx Aihsp Just under 20 t per chamber

Condition: used, Year of construction: 2020, functionality: fully functional, pressing force: 120 t, filling opening width: 2,000 mm, filling opening length: 1,000 mm, bale width: 750 mm, bale height: 1,100 mm, total width: 2,835 mm, total height: 4,374 mm, total length: 19,627 mm, overall weight: 43,000 kg, warranty duration: 12 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, For sale is a baling press, model "HP-G 4 120 VG6," manufactured in 2020, featuring a 6-strand vertical PP twine tying system. The pictures show the machine in its assembled condition. It is now located at our facility in Lathen. The press is sold without a conveyor belt. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of the relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, slide guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. Bwjdpozhudqofx Aihep We will be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Bwsdpjzil S Iefx Aihsp Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1996, machine/vehicle number: 7037, equipped with an ABB IRB6400F removal robot, year of manufacture: 1997, serial number: 1318, inventory number: 073005700, WOLLIN spray unit, casting automation, control system, touch panel, cooling tank, machine platform, belt conveyor, 1 ABB industrial robot as a spare parts dispenser. Bwjdpszhax Tefx Aihep

Condition: used, Year of construction: 1992, machine/vehicle number: 6597, Revision status: 2005, clamping force: 320 tons, melting and holding furnace DOGUS MACHINE EMHF-300/45, year of manufacture: 2020, heating capacity: 45 kW, diameter: 1,320 mm, height: 1,500 mm, casting automation, spray device WOLLIN LSC1, year of manufacture: 2014, serial number: 1009. Bwodpfx Aszhaykeihsp

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Bedpfxozbxwis Aihewp Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Punching force: 5 t Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Bwedpfx Ajzcpv Ssihep Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, This offer is for a used ‘Konica Minolta AccurioPress 6136P’ colour production system Items for sale: 1 x Konica Minolta AccurioPress 6136 with the following features: incl. PF-710 paper deck incl. OT-512 output tray incl. RU-510 incl. LS-507 stacker Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 13,234,766 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Bsdpfx Aijza Ac Tjhjwp Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2000, HAUG Sauer Compressors AG High-pressure reciprocating compressor with associated pressure vessel and control cabinet Bwsdpfski Tzujx Aihep Type: QTOX 120/65/35 WM-W Maximum final pressure: 66 bar Volumetric flow rate: 50 m³/h Rated power: 18.5 kW Rated speed: 1450 rpm Voltage/frequency: 400/50 V/Hz Year of manufacture: 2000 Maschinen- und Behälterbau GmbH High-pressure vessel up to 65 bar Type MB 00320-2.10 1000 liters Year of manufacture: 2017

Condition: excellent (used), Year of construction: 2020, General Description For sale: 6 hydraulic presses, model YL32-200. These are robust four-column presses, ideal for metal forming, pressing, stamping, bending, and general industrial uses. The machines were originally imported from China and are based on the widely used Y32 series, ensuring easy maintenance and worldwide availability of spare parts. ⸻ ⚙️ Technical Specifications (typical for YL32-200) * Press force: approx. 200 tons * Construction: 4-column hydraulic press * Stroke: approx. 400 – 700 mm * Table size: approx. 700 x 700 mm – 1000 x 1000 mm * Daylight (max. opening): approx. 800 – 1200 mm * Hydraulic pressure: up to 25 MPa * Motor power: approx. 7.5 – 15 kW * Control system: manual / semi-automatic * Power supply: 380V / 50Hz (industrial standard) * Weight per machine: approx. 5 – 8 tons ⸻ 🏭 Applications * Metal forming & stamping * Deep drawing * Straightening and pressing * Plastic forming * Workshop and industrial production ⸻ 📦 Condition * Used condition * Sold as is / ex-works * Inspection possible by appointment ⸻ 📊 Availability * Quantity: 6 machines available * Sale as single units or as a package ⸻ 🚛 Logistics * Location: Germany * Loading possible (forklift or crane required depending on configuration) * International shipping can be arranged * Price per unit!! * Dismantling by buyer!! Bwsdey E Abnepfx Aihsp * Alternatively, dismantling can be organized at an additional cost!

Year of construction: 1996, condition: used, Unfolding width: max. 200 mm Unfolding depth: 40 mm Profile height: max. 100 mm Vise jaw opening: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by pressing the foot switch Profile clamping by infinitely adjustable vise. Bwodeq Awg Ejpfx Aihop

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Bwodpfsyyz Ebsx Aihjp Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: Bjdpeyyzxhofx Aihjwp - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!