Used 2 Colour Press for sale (85,606)

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW Lsdpfx Aexaxr Nefwehk 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Good working condition Ljdpfjyb Sdisx Afwshk

Condition: good (used), Cooling compressor Stal KTK 207 25-33 Bar YOM 1991 Lhodpfx Afeyb Rquswok Good condition Dimensions (LxWxH): 4700x2200x1450 mm

Condition: new, functionality: fully functional, Available: Heating unit for FINPRESSE 130-1-12 press plates – 18 kW, temperature up to 130°C. The machine is brand new and offered to order. Before placing an order, we confirm the current delivery time and the exact configuration of the unit. The main advantage of the unit is its independent heating and forced oil circulation system, which enables precise heating of the press's work surfaces. The 18 kW heating unit, LOWARA circulating pump, and digital temperature control ensure stable conditions during the gluing, veneering, laminating, and pressing of wood and panel components. Specifications: • Manufacturer: FINPRESSE s.a.s. • Model: 130-1-12 • Type of equipment: Mobile heating and circulation unit for press plates • Heating medium: diathermic oil / thermal oil • Power of the heating unit: 18 kW • Maximum operating temperature in configuration with LOWARA CEA80/5/D-V pump: 110°C • Digital temperature regulation and control • Power supply: 400 V • Power system: three-phase, 3F + PE • Manufacturer of circulating pump: LOWARA • Pump model: CEA80/5/D-V • Pump design: version with FKM elastomers • Pump motor rated power: 0.75 kW • Pump capacity: 30–100 l/min, i.e. approximately 1.8–6.0 m³/h • Suitable for presses with shelf lengths up to 3.0 m • Pump motor speed: approximately 2875 rpm • Pump motor protection rating: IP55 • Independent control of the circulating pump and heating unit • Pump start-up indicator • Heating start-up indicator • Indicator light for reaching the set temperature • Fault indicator for the heating unit • Main power disconnect switch • Temperature sensor for the medium • Expansion tank located above the heating system • Separate supply and return manifolds • Multi-point connections enabling connection of press plate circuits • Tray for collecting any oil leaks • Drain connection • Mobile construction on transport wheels with locking capability • Weight: approximately 200 kg • Overall dimensions: approximately 140 × 45 × 240 cm (L × W × H) • Technical and operating documentation in Italian • Complies with CE requirements Applications: Lhedpfx Aeztl R Sjfwok • Heating of work surfaces of hydraulic platen presses • Maintaining the set temperature during pressing and gluing of components • Veneering and laminating of furniture panels, MDF, plywood, and wood • Applying HPL laminates, natural veneers, and other surface materials • Pressing of furniture fronts, doors, and composite components • Stabilizing the temperature during bonding and curing of adhesives Additional information: • The equipment is offered to order • Current delivery time is confirmed before placing an order • The pictures show the offered model of the equipment in an example configuration • Maximum operating temperature depends on the pump used, seals, and type of thermal oil • Configurations designed to operate at temperatures up to 130°C • The machine is covered by a warranty under the conditions specified by the manufacturer • The price stated in the auction applies to export sales/WDT with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport with the MDD fleet or through external carriers • We help in obtaining a lease or leasing loan • Delivery costs depend on the destination and the method of transporting the equipment

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side Ljdpfx Aoyyz Ebofwjhk - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts Lhsdpfxeyyzxhs Afwok - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Press force: 25 t Bending length: 1250 mm Distance between uprights: 1200 mm Control: Cybelec CybTouch 12 Stroke: 150 mm Lhsdpfjyz Sw Rox Afwok Installation height: 340 mm Rapid down speed: 220 mm/s Bending speed: 0-12 mm/s Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Dimensions: 1980 x 1170 x 2185 mm Standard equipment: Basic features: • CNC control Cybelec CybTouch 12 • 4 axes: Y1-Y2-X-R • Backgauge system model GHP-2 • Servo-driven main motor • Safety system: DSP AP+MCS • HAWE hydraulic system • CE standard

Condition: excellent (used), For sale: Professional vacuum lifter EXpressO Balance Greifer, manufactured in Germany. The device is designed for lifting and transporting flat elements using vacuum technology. The unit is equipped with a PIAB system and four suction cups, ensuring stable and secure gripping of materials. Ideal for industrial applications such as handling glass panes, sheet metal, panels, and other flat components. Technical Specifications Manufacturer: EXpressO Deutschland GmbH Lhsdpjyvd Upjfx Afwsk Model: Balance Greifer Load capacity: 20 kg Year of manufacture: 2012 Article number: 060BLV114110 Vacuum system: PIAB Number of suction cups: 4 Connections: G1 2 Vacuum manometer Condition The device is in very good technical condition Visible normal signs of use Complete as shown in the photos Applications glass and window handling sheet metal and panel transport warehouses and production production lines Included in the set complete vacuum lifter control handle pneumatic installation

Condition: used, Year of construction: 1992, Technical details: volume capacity: 1,95 m³/min feed pressure: 10 bar Number of working hours: 9166 h total power requirement: 15 kw weight of the machine approx.: 360 kg Lsdpfx Afeu Nzypowjhk space requirements of the machine approx.: L:1,54xB:1,3xH:1,2 m compact construction with integrated filter techn. details - max. operational pressure of the tank 11,5bar - operation voltage 380V - filter make Balwin type BT 364 slightly damaged covering, besides that top used condition We don't sell spare parts nor have spare parts available! *

Condition: ready for operation (used), Manual spindle press / 25 tons Ledpozcxdlofx Afwohk -Clearance between columns: 400mm -Spindle diameter: 80mm -Vertical clearance: 420mm -Various clamping jaws Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight: 700kg Errors and omissions excepted.

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225 (lift2move) Serial No. 19153-HD, Year of manufacture 2010 Type No. Rated load capacity 225 kg Lifting stroke 1770 mm Lifting height 2350 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting arm 400 mm Chassis length 1130 mm Ground clearance 90 mm Underrun length 600 mm Chassis design (front / rear) Ø 80 / 150 mm (2 fixed / 2 swivel casters) Overall length 1130 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and buttons for 2 lifting speeds Lhjdpfxeflt Ege Afwok - Battery pack with quick-change system - Battery charge indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually movable, swivel casters with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 at a distance of 100-120-100 mm Mounted lifting attachment: Quadruple lifting fork, Expresso type, load capacity of the lifting attachment 40 kg - Lifting attachment can be swivelled by 90° by hand (can only be locked in the 0° position) - Lifting attachment can be moved laterally by +-100 mm on linear guide (locking only in the center) - Width between the support arms 320 mm - Height between the support arms (height can be locked at) 365 / 400 / 450 mm (max. opening width without locking hole 510 mm) - Depth between the support arms 150 mm to the stop bolt / 300 mm maximum Total weight 100 kg Good condition

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225P (lift2move) Serial No. 19500S, Year of manufacture 2008 Model No. Rated load capacity 225 kg Lifting stroke 1680 mm Lifting height 2200 mm Lifting speed (unladen / laden) approx. 100 / 75 mm/s Outreach of lifting device 861 mm Chassis length 1020 mm Ground clearance 90 mm Underneath length 600 mm Chassis design (front / rear) Ø 80 / 140 mm (2 fixed / 2 swivel castors) Overall length 1400 mm Lhodpeflt Edsfx Afwok Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 units of 12 Volt, 17 Ah lead-acid batteries installed in the battery pack - External charger 24 VDC, 3 Amps (mains voltage 230 V, 50 Hz) - Can be moved manually, swivel castors with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard Special version: lifting device from GIESLER for radial fan SC-1000 CP XT (Tiger) - Load capacity of the lifting device 25 kg - Lifting device can be swivelled 90° via manual hydraulic pump - Opening width between the support jaws 300 / 330 mm - Opening width between the clamping rollers 200 - 300 mm - Clamping is done via handwheel - Weight of the lifting device 60 kg Total weight 140 kg very good condition

Condition: used, Electric stacker – pedestrian stacker, tow stacker for ergonomic handling of small loads EXPRESSO Type Lift & Drive 125 (lift2move) Serial No. 194679 Year of manufacture 2015 Type No. 1418242111 Rated load capacity 125 kg Lifting height 1450 mm Total lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting support 530 mm Chassis length 890 mm Ground clearance 90 mm Lsdpfx Afeflt Ebjwohk Underrun length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel casters / 2 swivel casters) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Battery charge level indicator - 2 pcs lead-acid battery 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 Amperes (mains voltage 230 V, 50 Hz) - Manually steerable, swivel casters with three-stage parking brake - Handle continuously adjustable in height - Load receiver U-profile for square profile according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm / 4 mounting holes M8 at a distance of 50-60-50 mm Mounted lifting support: Special design from GIESLER LAM-DC power rail Load capacity of lifting support 40 kg Weight of lifting support 24 kg Support rail laterally adjustable by +-90 mm via linear guides (3 locking points left, center, right) Support rail swiveling +-38° (infinitely adjustable and lockable) Support rail with 2 clamping jaws Distance between the clamping jaws 550 mm Material clamping thickness 100 mm Dimensions of material support W x D 650 x 155 mm Total weight 75 kg very good condition

Condition: used, Year of construction: 2001, Hydropneumatic operation Profile height: 210 mm under hold-down Lhedpfx Afoyu Rztswjk Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 2009, Hydraulic operation Profile height up to 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Lsdpfoyu Rw Iex Afwjhk Abutment height: 150 mm Weight: approx. 450 kg

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Lhedpfxjyazdie Afwok Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Ledpfjpbvqvox Afwshk Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location Lhjdpfjzav Ddsx Afwjk - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: used, Year of construction: 1998, Hydropneumatic operation Ljdpfoyrrddex Afwjhk Profile height: 180 mm under hold-down Max. insertion height: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 1995, Hydropneumatic operation Profile height: 180 mm under hold-down Max. insertion height: 145 mm Lhjdpfx Afeyrrbvswek Abutment height: 150 mm Weight: approx. 400 kg

Year of construction: 2001, condition: good (used), Kaeser BSD 72 compressor Lhedpfx Asmnqkisfwsk

Condition: used, Year of construction: 2011, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Abutment height: 150 mm Lhjdjynalujpfx Afwek Weight: approx. 400 kg

Condition: used, Description: ATN drum press DOUBLE-RAM-PRESS / DOUBLE RAM PRESS, 125 L, as new Lhjdeyghnzepfx Afwek

Condition: used, System: Used chamber filter press Type: Passavant Application: Sludge dewatering Design: Bridge beam Year of manufacture: 1972 Filter plate size: 1200x1200 Number of plates: 59 plus head and end plate Ljdpfowqyf Iox Afwshk Filter plates: PP Filter cloths: optionally available, to be matched to the medium Filter area: approx. 270 m² Press volume: approx. 1700 dm³ Filter pressure: approx. 15 bar Pump technology: optional Purchase or rent: Inspection of the systems by arrangement at our facility.

Condition: used, System: Chamber filter press, used Type: REWA Application area: sludge dewatering Design: side rail Lsdpfx Afowqyfhowehk Filter plate size: 470x470 Number of plates: 27 + head and end plate Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 17 m2 Press volume: approx. 90 dm3 Filter pressure: approx. 15 bar Pump technology: optional Washing system: No Miscellaneous: LxWxH 3000x550x1200 mm Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.