Used 2 Needle Sewing Machine for sale (110,521)

Condition: used, Year of construction: 1979, Roundo plate/pipe roller. In recent years, it has primarily been used for rolling smoke pipes with a diameter of 150–160 mm. Four pallets with rollers are included; they are used to determine the pipe diameter. Using a pneumatic cylinder, the end is opened to remove the rolled pipe. I have tested the machine, but the rollers do not run. There is probably a simple solution for this. Machine and rollers weigh approximately 3–4 tons. Ksdpfxoyvqc Ue Ai Hjdl

Year of construction: 2005, condition: used, Hard cover book line Consisting of Year: 2005 - 2000 - 1999 Book block feeder Solema Autoload Year: 2000 Nipping machine Sigloch NHG-60 1 Year: 1999 Kedpfx Asyi Emysi Hedl Description: - Pressing station End sheet tipping machine Sigloch VAM Year: 2005 Description: - Cold glue: HHS - End sheet tipping: 2x Book back gluing machine Sigloch SB 3100/2 Year: 2005 Description: - Cold glue spine gluing - Intermediate drying station (infrared) - Cold glue spine gluing - Back lining station - Transport system, length (approx): 60 mtr Nipping & smashing machine Sigloch DNH Year: 2005 Description: - 2 pressing stations

Condition: excellent (used), functionality: fully functional, Durkopp Adler 887 - 363122 Classic 1-needle fully automatic flatbed lockstitch machine Kdjdpfx Aisy Nxabo Hjl Triple roller feed Thread trimmer Upper fabric knife Manual reverse Start and end bartacking 230V motor All functions adjustable via intuitive control panel Machine in very good technical condition, ready for operation Courier delivery available More information: +48 662 448 730

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Kdedev Sa Utopfx Ai Hsl Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order.

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Ksdpetyqhqofx Ai Hedl

Condition: excellent (used), YUKI INDUSTRIAL SEWING MACHINE with 4 threads, cord sewing machine, with table and air assistance during operation. IN MINT CONDITION. Kdsdpsd Swvujfx Ai Hjl

Condition: used, Size max 360x310 mm min 100x85 mm Number of stitches Standard 2-10 Staggered 2-5 Continuous 2-9 Stitching length 15.7mm Speed max 9000 c/h min 900 c/h Power requirements 1.8 kW (220/380V, 50Hz) Length 4744mm Width 1035mm Kedpfx Aiowkufie Hjdl Weight 3135 kg (approx.) Equipment • 1 set of tools • 1 set of electrical diagrams • 1 set of operator manuals • 1 spare part catalogue • standard equipment

Condition: good (used), Size: 320 x 420 mm; min 75 x 150 mm Speed: max 9000 Ex./h Number of stitches Standard: 11 Stitching length: 19 mm Power requirements: 50 Hz, 3 Phasen kW (220/380V, 50Hz) Compressed air: 4 bar Weight: 2300 kg (approx.) Engine speed: 2,5 kw Kdoder Duu Aopfx Ai Hjl

Condition: used, Tool presetting device SOMET type SPS 500 U Machine no.: S1 Year of construction: 1987 Table surface: 545 x 1000 mm Travel paths: X = 500 mm, Y = 340 mm Width in portal: 550 mm Height table to portal underside: 250 mm - Longitudinal portal guide right and left on the table - Adjustment via very fine threaded spindles with handwheel Kjdsdzqrtspfx Ai Hedl - Quick adjustment by electric release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 clamping fixtures for tool measurement - On base with shelf and drawer Required space (L x W x H): 1100 x 700 x 1650 mm Weight: 560 kg Good condition

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel Ksdpfxsvt D D Us Ai Hsdl - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Kdedpfjfifa Ajx Ai Hjl Freight costs on request

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Set of machinery for garment manufacturing in very good condition and with little use. A list of equipment is attached. Interested parties, please send an email for further information. Kedpfey Ickzsx Ai Hjdl

Condition: used, Year of construction: 2011, Sewing machine Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm Ksdpfx Asx Sybfoi Hodl size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) Kjdpfsy Ipy Ajx Ai Hjdl • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 919254, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale during the jeans factory liquidation is a GLOBAL US 63900 CH-NA-AUT automatic industrial chainstitch hemming machine, offered as a complete workstation. This modern (2019) unit is specifically designed for high-quality bottom hemming in denim, trousers, and workwear production. Built on the well-known 63900 platform, it delivers the classic chainstitch finish required in professional garment manufacturing. The machine features automatic functions including thread trimming and pneumatic operation, enabling efficient and consistent production with minimal manual intervention. The unit has been used in a professional production environment and was fully operational prior to factory shutdown. Kodpfjy Ipu Tex Ai Hodl The machine has been serviced on 27.02.2026 and video recorded in full operation in April 2026. Key features: • Automatic chainstitch hemming system • High-speed production capability • Classic 63900 chainstitch finish (denim standard) • Automatic thread trimming • Pneumatic presser foot operation • Stable feeding and consistent stitch quality • Modern unit (2019 model) with low mechanical wear Includes: • GLOBAL US 63900 CH-NA-AUT machine head • Industrial sewing table • Motor and control unit • Foot pedal • Thread stand • Integrated hemming and trimming system • Suction system for thread and fabric waste (visible) Technical details: • Manufacturer: Global Selection (Netherlands) • Model: US 63900 CH-NA-AUT • Year: 2019 • Stitch type: Chainstitch • Max speed: approx. 5,000 stitches per minute • Needle system: DVx57 • Power: 220V • Pneumatic system required Condition: • Used, excellent production condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Denim bottom hemming • Garment finishing • Workwear production • Chainstitch hemming operations Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09020018, input voltage: 230 V, pneumatic connection: 5.5 bar, Description: For sale is a VIBEMAC 3022 WB 406-1CS industrial waistband sewing machine, offered as a complete workstation. This Italian-built unit is specifically designed for high-precision waistband attachment and reinforced seam operations in denim, trousers, and workwear production. The machine produces strong and consistent chainstitch seams and is widely used in professional garment manufacturing environments. Kjdpfx Aiey Ipnas Hodl The unit has been in production use and was fully operational until factory shutdown. The machine has been video recorded in full working condition on 01.04.2026. VIBEMAC machines are known for their durability, precision, and long operational lifespan, making them a preferred choice in denim production. Key features: • Automatic waistband sewing system • Chainstitch seam for strong and flexible stitching • Suitable for heavy fabrics (denim, workwear) • Consistent seam quality and high repeatability • Designed for continuous industrial use • Integrated feeding system for stable material handling Includes: • VIBEMAC 3022 WB 406-1CS sewing machine head • Integrated motor and drive system • Industrial worktable and steel stand • Foot pedal control • Thread stand and guides • Integrated control panel Technical details: • Manufacturer: VIBEMAC S.p.A., Italy • Model: 3022 WB 406-1CS • Year: 2009 • Stitch type: Chainstitch • Needle system: 62x57 F120 • Power: 220 / 380V Condition: • Used industrial condition • Fully operational prior to factory shutdown • Video recorded in operation (01.04.2026) • Recently serviced (27.02.2026) • Typical signs of use from production environment • Sold as-is, where-is, without warranty Typical applications: • Waistband attachment (jeans, trousers) • Reinforced seams • Heavy-duty garment production Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2795, power of the servo motor: 750 W, input voltage: 230 V, pneumatic connection: 7 bar, For sale is a high-performance Brother automated sewing unit equipped with a JAM TC 762 F automation module, offered as a complete industrial workstation. This system is specifically designed for automated pocket setting and precision sewing operations, making it highly suitable for denim, trousers, and workwear production. The integrated automation module enables accurate material positioning, clamping, and repeatable stitching cycles with minimal operator input. The unit combines a heavy-duty Brother sewing head with JAM International automation technology, delivering consistent production quality and significantly improved efficiency compared to manual processes. The machine has been used in a professional garment factory environment and was fully operational until factory shutdown. The unit has also been video recorded in full working condition on 01.04.2026. Ksdpey Inyhefx Ai Hodl Key advantages: • Automated pocket setting and J-stitching • High repeatability and production consistency • Reduced labor dependency • Suitable for continuous industrial production • Complete workstation ready for integration • Production Capacity: Approximately 2,600 pockets per 8-hour shift. • Maximum Speed: Operates at up to 3,600 RPM. • Quick-Change System: Features a pneumatic mold change system, allowing for fast transitions between different pocket sizes and styles. • Versatile Operation: Capable of both semi-automatic and fully automatic modes, handling both pre-ironed and unironed pockets. Includes: • Brother automated sewing machine head • JAM TC 762 F automation module (material handling and positioning) • Electronic control system (TC 762 interface) • External PC workstation (monitor, keyboard, control unit) • Pneumatic system with regulators • Dual foot pedal controls • Industrial table and heavy-duty frame • Safety guards and integrated lighting • Fabric support and output handling system Technical details: • Manufacturer: Brother Industries, Ltd. (Japan) • Automation module: JAM International TC 762 F (Italy) • Type: Programmable automated sewing workstation • Power: 220V • Pneumatic system required • Integrated control and external PC operation Condition: • Used industrial condition • Fully operational prior to factory shutdown • Video recorded in operation (05.03.2026) • Maintained and serviced, latest maintenance 27.02.2026 • Typical signs of use consistent with production environment • Sold as-is, where-is, without warranty Typical applications: • Automated pocket setting • Denim and trouser production • Workwear manufacturing • Reinforcement stitching • Repetitive precision sewing operations Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, The RGM 2 is a state-of-the-art Tube End Finishing Machine designed by KNUTH, renowned for its robust and precise engineering. With a rigid design and a small footprint, this machine is perfectly suited for shops that require efficiency without sacrificing performance. The RGM 2 features an impact chuck at the front and a clamping chuck at the rear, ensuring secure handling of various tube sizes. Additionally, it includes a tube cutter and an inside tube deburrer, which provide a complete solution for finishing operations. For mobility, the machine is equipped with a mobile base. When looking for a reliable Tube End Finishing Machine, the RGM 2 stands out with its advanced features. Don't hesitate to request a quote today to enhance your tube processing capabilities with this exceptional product from the renowned KNUTH brand. Kdedpfop Atgbsx Ai Hol

Condition: used, Year of construction: 2004, total length: 3,900 mm, total width: 1,050 mm, total height: 1,350 mm, overall weight: 900 kg, For sale: Marel TSM – Template Slicing Machine, a professional system designed for portioning chicken breast and poultry fillets. This unit is engineered for slicing fresh, non-frozen chicken fillets and butterfly breast meat into portions with uniform shape and consistent weight. The Marel TSM uses a template-based portioning system, making it ideal for poultry processing plants and meat processing facilities requiring precise and repeatable portion control. Operation Principle: Raw material is placed in dedicated moulds (templates), where it is securely shaped by vacuum. Once positioned, a band saw slices the meat horizontally according to the template profile. Finished portions are discharged onto the product conveyor, while trimmings are transferred separately onto a dedicated conveyor. This process ensures exact cutting and exceptionally consistent production results. Technical Specifications: - Model: Marel TSM - Year of manufacture: 2004 - Capacity: approx. 35 plates/min - Power: 3 kW - Power supply: 3 x 240 VAC + PE or 3 x 400 VAC + N + PE - Frequency: 50/60 Hz - Air pressure: 5–6 bar - Water consumption: 6 l/min - Dimensions (LxWxH): approx. 3900 x 1050 x 1350 mm - Weight: approx. 900 kg This machine is an excellent solution for companies seeking precise and efficient portioning of chicken breasts, ensuring repeatable, high-quality products. Kdedpfsy Dgk Djx Ai Hel MAREL / TSM / TSM2 / TEMPLATE SLICING MACHINE / POULTRY / BREASTS / PROFILER

Condition: excellent (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 110-00310, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 2,500 mm, feed length Y-axis: 800 mm, pneumatic connection: 6 bar, compressed air connection: 6 bar, The KSL110-Headbag CNC Rotary Head Sewing System is in excellent condition and has logged approximately 2,000 operating hours. Fields of Application: Demanding safety, functional, and decorative seams. Features: - Sewing machine driven on the X axis, template driven on the Y axis - 360° rotary head with alternating double feed for perfect seam results in multi-directional sewing processes - Intermittent feed (feed stops when the needle pierces the material) - Switchable needle feed (on/off) for continuous sewing with maximum seam quality - Sewing head can be pneumatically lifted (75 mm) for direct access to any seam position - Two 26 mm bobbins and hooks - Excellent sewing properties thanks to the vertical hook system - Top thread tension is electrically/pneumatically adjustable via menu with Eltex unit - Broken thread monitoring - Bobbin thread monitoring via stitch counter - Electromagnetic thread trimmer for upper and lower thread - Mobile electric bobbin winder (freely positionable) - The touchscreen control panel provides intuitive operation and stands out with its modern, clear layout. Seam progress can be monitored in real time on the screen. Special Features: - Automatic detection of the workpiece holder/sewing program via hand scanner and barcode ensures additional process safety - Sewing area is protected by light barriers (CE compliant) - Pneumatic presser foot height adjustment - Clamping device for fixing two sewing templates in the working area Technical Data for the KSL110-Headbag CNC Rotary Head Sewing System: - Length and width: 3,495 mm x 4,276 mm - Height: 1,685 mm - Weight: 2,000 kg - Max. sewing area: 2,500 mm x 800 mm - Stitch type: 2-needle/double lockstitch - Max. material thickness: 10 mm - Max. sewing speed: 2,800 stitches per minute - Max. stitch length: 12 mm - Operating voltage: 3P+N+PE / 400 VAC / 50–60 Hz - Power consumption: 16 A / 5 kW - Operating pressure (min. – max.): 6 bar - Year of manufacture: 05/2017 - Operating hours: approx. 2,000 h - Control unit: Touchscreen monitor with computer (Windows) Kdjdpsyxnl Sjfx Ai Hel The CNC Rotary Head Sewing System KSL110-Headbag is a powerful industrial sewing system designed for demanding safety, functional, and decorative stitches. Manufactured in 2017, this model is characterized by its robust construction. The machine is housed in a grey and white aluminum cabinet that appears clean and well-maintained, indicating careful use. This advanced CNC sewing system offers a sewing area of 2,500 mm x 800 mm and operates with a 2-needle double lockstitch system. It supports a maximum sewing speed of 2,800 stitches per minute and a maximum stitch length of 12 mm. The sewing head is pneumatically liftable by 75 mm, allowing direct access to any seam position, and features a 360° rotating head with alternating double feed, ensuring perfect seam results in multi-directional sewing processes. It is particularly suitable for demanding and industrial sewing applications that require high precision and reliability.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST D2 002, saw blade diameter: 250 mm, overall weight: 2,850 kg, cutting width (max.): 450 mm, Two-spindle multi-saw wood cutting machine JL32 Good working condition Max. 10 circular saw blades on the spindle, diameter 250mm x 70mm Main spindle dimensions: diameter 70mm, length 420mm Feed rate (cutting): 5-25 m/min Machine dimensions: length 2200mm, width 1500mm, height 1900mm Machine weight: 2850kg Voltage: 380V Main motor power: 30kW and 22kW (2950 min-1) Ksdpfxey E Snqs Ai Hodl Feed motor power: 0.75kW and 0.75kW (900 min-1)

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 800 rpm, spindle speed (min.): 4 rpm, table length: 1,800 mm, table width: 1,600 mm, table load: 10,000 kg, total height: 3,800 mm, total length: 7,030 mm, total width: 4,665 mm, spindle diameter: 130 mm, spindle motor power: 15,000 W, MTP TPX6113-2 HORIZONTAL BORING MACHINE Kdodpfx Aioy Eyg Us Hjl Horizontal Boring Machine TPX6113/2 – Precision and Power for Heavy Machining The TPX6113/2 horizontal boring machine is a robust and efficient solution designed for precise machining of large and heavy workpieces. Thanks to its rigid construction and high technical performance, it is ideally suited for use in the mechanical, energy, and steel structure industries. The machine is equipped with a Ø130 mm spindle, ensuring high stability and enabling demanding machining operations. A powerful 15 kW main motor and high torque guarantee efficient performance even under heavy loads. The large worktable (1800 × 1600 mm) with a maximum load capacity of 10,000 kg allows machining of heavy components without compromise. The full table rotation (B axis – 360°) increases flexibility and enables multi-side machining without repositioning the workpiece. Technical Specifications: Spindle diameter: Ø130 mm Max spindle torque: 3136 Nm Max spindle feed force: 31,360 N Number of spindle speeds: 24 Spindle speed range: 4–800 rpm Main motor power: 15 kW Max facing head torque: 4900 Nm Facing head diameter: 750 mm Facing head speed range: 2.5–125 rpm Number of facing head speeds: 18 Table size: 1800 × 1600 mm Max table load: 10,000 kg T-slots: 28 mm × 10 Axis travels (X/Y/Z/W/U): 2000 / 1800 / 2000 / 900 / 250 mm Table rotation (B axis): 360° Rapid feed (X/Y/Z/W): 2500 mm/min Feed per spindle revolution (X/Y/Z/U): 0.05–8 / 0.01–2 mm/rev Measurement system accuracy (X/Y/Z): 0.005 mm (Z optional) Measurement system accuracy (B axis): 0.001 mm (optional) Dimensions: 7030 × 4665 × 3800 mm Machine weight: 29,300 kg

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Outer diameter: 200 mm -for: 35 mm pipe -Bearing seat: Ø 55 mm -Bore: Ø 49 mm -Quantity: 2 rolls available Price: complete Ksdpfxod Naw Ae Ai Hodl -Dimensions: Ø 200 x 81 mm -Weight: 11 kg

Condition: used, Machine light, machine lamp, workroom light, recessed light, LED recessed light, ceiling recessed light -Manufacturer: varialux, recessed light with LED 24V / 17W 2 pieces unused Ovp -Type: 9282-710 -Connection: WAGO connector 5-pin -Quantity: 2 boxes available -Price: per box Kdedpfx Aior Htnko Hel -Dimensions: 710/250/H120 mm -Weight: 3.1 kg/carton

Condition: good (used), Year of construction: 1965, Sewing machine, stand-mounted chain stitch sewing machine, industrial sewing machine, industrial sewing machine, stand-mounted sewing machine, overlock sewing machine on a mobile stand, fabric feed via sliding wheel -Manufacturer: Dohle, industrial sewing machine type 751-914 stand-mounted chain stitch sewing machine -Drive: Kobold 0.37 kW -Operation: with foot pedal -Dimensions: 630/470/H1360 mm Kdodpova Acpsfx Ai Hsl -Weight: 93 kg