Used 2 Ram Baler for sale (79,024)

Condition: ready for operation (used), Siemens Teleperm M 6DS1837-8EA Ram memory module E Stand 2 SN CO960610 used 100% functional Fpodpjxahx Sofx Adceh

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced Fjdpfsy R Nnfjx Adcoph • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: like new (used), - Brand: Graco - Reference: CM1145 - General Industry Fedpfx Ajv S Dzdodcoph - Application: Bonding, Sealing, PVC, Gaskets, Encapsulation, Molding, Discharging, Filling in case of material shortage - Maximum flow rate: 3.4 L/min - Maximum working pressure: 276 bar - Maximum air inlet pressure: 8.62 bar - Pressure ratio: 40:1 - For 20 L drums - Maximum operating temperature: 49°C - Fully inspected pre-owned product - 1-year warranty (Except for electric machines and non-Graco products) - Shipping or in-store pickup available - 21% VAT not included - VAT included. A VAT refund may be requested for VIES-registered companies or those with a TAX ID. - Customs and tariff fees are the buyer's responsibility in the case of imports

Condition: ready for operation (used), Indramat MAC 071B-0-TS-2-C/095-A-1/S001 permanent magnet three-phase servo motor, serial no. acc. to photo, used, strong traces of use, 100% functional, scope of supply acc. to photos Fodpfoi D Ihfjx Adcjph

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-A-0/S001 permanent magnet three-phase servo motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Fodpfxsi D Ihuo Adceph

Condition: ready for operation (used), Indramat MAC090C-1-GD-1-B/110-A-2/-I01250/SO13 motor SN: MAC090-42934 - Tacho constant 3.0 V / 1000 min-1 / brake 14 Nm DC 24 V, used, good condition, 100% functional, delivery as per photos. Fpodpfx Ajxtv U Uedcsh

Condition: ready for operation (used), Indramat CLM 01.3-M-E-2-0 module , used, normal signs of wear, 100% functional Fpedoi Ebbmopfx Adcoh

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0 Permanent Magnet AC Servo Motor, Serial Number: 6782V, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fedpfjy T Dm Isx Adcoph

Condition: ready for operation (used), Indramat MAC 71A-0-ES-2-C/095-A-1 permanent magnet synchronous motor, serial number as shown in the photo, mounting hole spacing: 92 x 92 mm, drive shaft diameter: 19 mm, used, with normal signs of wear, 100% functional. Fsdpfsi D Iktsx Adcjph

Condition: ready for operation (used), Indramat MAC 071B-0-PS-2-C/095-A-0 Permanent magnet three-phase servo motor SN:43146,used, minor signs of wear, 100% functional, scope of delivery as per photos Fpedpfx Adsq N Ufdsceh

Condition: new, Indramat MAC 090A-0-ZD-2-C / 110-A-0 / S005 SN:75121 ,unused, 100% functional, scope of delivery according to photos Fpodei D Ihijpfx Adcoh

Condition: ready for operation (used), Indramat MAC 112A-0-LD-2-C/130-A-0 permanent magnet three-phase servo motor , serial no. according to photo , hole spacing of mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm ,used, normal signs of wear, 100% functional, scope of delivery according to photos Fpsdei D Iikopfx Adceh

Condition: new, Rexroth Indramat MAC071C-0-JS-2-C/095-B-0 Permanent magnet motor , unused, 100% functional Fpsdpfx Adji D Nddocoh

Condition: ready for operation (used), Indramat MAC071B-0-TS-3-C / 095-B-2 Permanent Magnet Motor, SN:MAC071-62033, encoder connection cable missing, used, normal signs of use, 100% functional, scope of delivery as per photos Fpsdsi D Ik Eepfx Adcsh

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C / 110-A-1 Permanent Magnet Motor, Serial No.: MAC090-80045, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fsdpfx Aoy T Unpedceph

Condition: ready for operation (used), Indramat MAC093A-0-LS-2-C/110-A-1// Permanent three-phase servo motor SN:7846, used, normal signs of use, 100% functional, scope of delivery as per photos Fpsdevy N S Dspfx Adcjh

Condition: ready for operation (used), Indramat MAC117E-0-ES-2-F/180-B-1/S001 Permanent magnet motor , hole spacing of the mounting holes: 152 x 152 mm, Ø drive shaft: 28 mm, used, normal signs of wear, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Fpsdpfxei D Irpo Adcjh

Condition: new, Indramat MAC112B-0-GD-2-C/130-A-1/S005 Permanent Magnet Motor, SN:MAC112-10094 ,unused in opened original box, 100% working, scope of supply according to photos Fjdpfx Adji D Ipujcsph

Condition: ready for operation (used), Indramat MAC115A-0-FS-2-C / 180-B-1 / S001 Permanent Magnet Motor SN:MAC115-04930, used, normal signs of use, 100% functional, scope of delivery as per photos Fjdpfx Adsi D Irhjcoph

Condition: ready for operation (used), Indramat MAC 071B-0-PS-2-C / 095-A-0 three-phase servo motor SN: 14432,used, normal signs of wear, 100% functional, scope of delivery as per photos Fjdpfx Aou I Nnrjdcjph

Condition: ready for operation (used), Indramat MAC 112B-1-GD-2-C/130-A-0/SO05 - MAC 112B-1-GD-2-C / 130-A-0 / SO05 permanent magnet three-phase servo motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Fsdpfx Adoi D Iirjceph

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet - three-phase servo motor, SN:68352, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,For this item, the agreed sales discounts do not apply. Price please enquire separately!,ATTENTION: Costs for packing and shipping please enquire separately! ATTENTION: Please enquire for charges for packing and transport separately! Fsdpei D Ii Isfx Adcsph

Condition: ready for operation (used), Indramat 093B-0-GS-2-C/110-A-2 Servo motor SN: 26939,used, good condition, 100% functional, scope of delivery as per photos Fpjdjq N Ud Sepfx Adceh

Condition: ready for operation (used), Indramat MAC 90B-0-ND-2-C/110-A-0 permanent magnet three-phase servo motor, serial no. according to photo, used, strong traces of use, 100% functional, scope of delivery according to photos Fpsdpsi D Ikhsfx Adcoh

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C/110-A-1 Permanent Magnet Motor SN MAC090-93888, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Fpsdpslntwqefx Adcoh