Used Two-Aisled Hall for sale (7,800)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: HB32-305, Hydromat HB32/16, double cycle, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control: Bosch MTX, HME operating interface Coolant system: Knoll (oil), vacuum rotary filter, low-pressure and high-pressure pumps for internal tool cooling Machine table with 8 collet chucks and 8 two-jaw chucks 1x Stäubli robot for transferring workpieces from the first to the second clamping position 1x loading magazine, 4.2m 1x VE 40/80 sawing unit 8x feed units: VE 36/100 or VE 35/60 5x CNC 50/100 turning units 2x 3-axis CNC milling units Nordmann tool monitoring Pickup conditions: The machine base measures approximately 4 meters in length, 3 meters in height, and 2.5 meters in width. The weight is approx. 6 tons. The other components are demountable. Itodpfsy Nkhdsx Ah Djk The hall is very spacious. There is no crane runway; a forklift is required for disassembly. No forklift is available on site! The aisles are 3 meters wide. There is a large roller gate, and trucks can drive directly up to, or even through, the gate for loading.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 3,220 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,860 mm, load center: 800 mm, fuel type: electric, mast type: duplex, battery capacity: 930 Ah, battery voltage: 48 V, fork carriage width: 2,840 mm, fork length: 1,600 mm, ground clearance: 130 mm, turning radius (outer): 1,950 mm, total height: 2,710 mm, total length: 2,840 mm, total width: 2,670 mm, color: white, Equipment: cabin, Electric four-way reach truck HUBTEX MQ 30, first owner, in very well-maintained condition: – Model MQ 30 AC / Series 2125-EL (larger model series) – Designed for the transport and stacking of wood-based panels – Load capacity 3000 kg at LSP 800 mm to H3 5000 mm – Load capacity 2670 kg at LSP 1050 mm to H3 5000 mm Itedpszugt Refx Ah Djk – NB = 1600 mm useful width – MV = 1700 mm mast extension – RB = 2670 mm frame width – b1 = 1040 + 30 mm front dimension – b2 = 1070 mm front dimension with reinforced fork carrier – RL = 2440 mm frame length – KÜ = 180 mm cab overhang – GL = 2840 mm overall length over fork carrier – Ra = 1340 mm wheel arm clearance – SH = 2500 mm height above driver protection roof (+300 mm) – Rh = 500 mm height wheel arms – BF = 130 mm ground clearance lower mast – Wa = 1950 mm turning radius – 3-stage lift mast H 60 TIL (very stable) – H1 = 2707 mm height of lift mast retracted – H2 = 1867 mm free lift – H3 = 5000 mm lift height (top of fork tines) – H4 = 5840 mm height of lift mast extended – VH = 840 mm height fork carrier – Intermediate lift limitation at H3 = 3900 mm – Long load fork carrier Type II, GTL = 2840 mm – Fork carrier in low and reinforced design – Fork adjustment hydraulically from 560 to 2840 mm (adjustable forks) – Fork tilt hydraulically +5 / –3 degrees – Fork tines (pair) length 1600 mm – Fork cross-section 50 x 150 mm – Multi-directional steering system H4 electronically controlled – 4 steering programs with longitudinal/lateral travel and circular/diagonal travel – Service brake as an automatic regenerative brake – Parking brake as an electro-magnetic parking brake – 4-wheel chassis with two vertical motors and heavy-duty load wheels – 2-piece swing axle with mechanical level compensation – Tires, drive side 2 x 457 x 200 mm Super-Elastic – Tires, load side 4 x 381 x 127 mm solid rubber – Motor control with three-phase motor and inverter – Drive power 2 x 4.0 kW – Working hydraulics with proportional valve technology, continuously adjustable – Lift power 14.0 kW – Steering power 4.0 kW – Operation via multi-function joystick – Driver's cabin as a lateral seat cabin Q850 with 830 x 850 mm – Entry and exit on the racking aisle side – Driver protection roof with laminated safety glass – Safety glass on the load side, front, and battery side – 2 work spotlights on the cabin roof – Comfort seat, vibration-damped, adjustable in multiple ways – On-board computer Hubtex HIT 2 – Paint finish RAL 9002 grey-white and RAL 7021 black-grey – Battery 48V 6EPzS 930 Ah – Battery charger D400G48/125 for 12-14 hours charging time – Aquamatic and filling station – Battery 48V 6PzS 930 Ah with tray renewed in 03/2021 – Year of manufacture 2006, operating hours original 3220 h – First owner, very well-maintained condition – Truck always stored in a heated hall – Regular maintenance by Hubtex – Last maintenance in 08/2025 at 3100 h – New maintenance possible upon agreement – Application was for feeding a wood-based panel saw – Sale due to automation of the panel saw – Inspection and test run possible upon agreement – Sale from location Karlsruhe / Southern Germany

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, PRICE REDUCED AGAIN!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. This would certainly be of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer, which is a newer, smaller-form-factor HP model. Max. diameter: 350mm Max. test piece height: 500mm (higher measurements are possible, up to a maximum of 1000mm when measured in two halves...) Self-centering of the workpiece: +/- 5mm Max. weight of test piece: 40 kg The system has been used very little and has had only two owners. The first owner, from whom I purchased it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. There is also a sample/sample lens (hemisphere) for calibration! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets using a freight carrier. It is already securely fastened to the pallets. The Talyrond 265 and the desk will be well-protected with bubble wrap, etc., and secured with stretch film for transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! Itsdpfx Ahozcqy Ej Dok The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide excellent service for many years to come!!

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Itsdpfxszbkl Se Ah Dek Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.).

Condition: good (used), Year of construction: 2014, Set of 4 modular office units, room-in-room system, two-story, including staircase, approx. 139m2 – used: Price ex-works: €19,950 (net), disassembled, packed, and loaded! Item no. 11: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, likely 2014 Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length including staircase: total approx. 14.51m Itodszqzuuspfx Ah Djk Width of “gap” for the staircase: approx. 1.27m Right block, top and bottom: Length: approx. 4.60m (4 elements and one narrow element) Left block, top and bottom: Length: approx. 8.64m (8 elements) Depth approx.: 5.28m (5 elements) Ground floor height: approx. 2.70m Total height approx. 5.40m 4 doors All offices are closed on three sides and therefore stand with one side against the hall wall Includes lighting, etc., as available Ground floor without flooring, upper floor with flooring Sale excludes furniture, etc. Condition: good Available: from approx. Q4 / 2026 Location: Hamburg

Condition: good (used), Year of construction: 2019, Racking Hall consisting of cantilever and pallet racks, OHRA, floor area approx. 867m² – used –: Price ex location: €99,500 (net), for self-dismantling! Price for dismantling available on request. Material to close one gable side is also available at extra cost! Manufacturer: OHRA Year of manufacture: 2019, sheet metal 2021 Hall dimensions: Width: approx. 17.35m Length: approx. 50m Height rack: approx. 6,385mm Ridge height: approx. 7.10m After disassembly, one long side of the hall remains open (where it currently adjoins the existing building) Cantilever racking: 2 rows of 25 double-sided frames each = total 50 double-sided cantilever rack frames Arm length: 1.20m Arm load: 1,400kg Load center: 600mm Post load per side: 4,200kg Axle spacing: 2m Arms are plugged in Arms have load deflectors, preparation for unrolling protection Incl. pallet beams Base level plus 3 arm levels per side Total depth: 2.70m (2 x 1.20m plus 30cm frame) Aisle width: 3.25m K-Foot-60-IPE 300-1200-1200-RS-A-RAL K-Roof arm-K60-IPE 120-2750-S6°-PW4-A-RAL Pallet racking: Manufacturer: OHRA System: pallet racking P3 Year: 2019 Bay width: 2,900mm, four bays at length 2.40m Bay load: 2,000kg Field load: 6,000kg Top edge 1st support (buckling length): 800mm 1 row with 17 frames, 1 row with 19 frames (there are pipes at two locations) Iedpjyk H Riofx Ah Djtk Number of frames: 36 Rack length: approx. 48.10m Frame depth: 1.10m Frame width: approx. 10cm Beam height: approx. 10cm Beam thickness (bearing surface): approx. 5.5cm Beams: IPE Floor plus 3 beam levels Number of beams: approx. 162 pcs at 2.90m and approx. 24 pcs at 2.40m length Snow load zone: 1 (0.65kN/m²) Wind zone: 1 / Terrain category 0.48kN/m² Available: immediately Condition: good, slight rust on outer frames and faded paint Location: Hockenheim region Drawing available as PDF, parts list, structural calculations. The sideloader shown in the photos is also for sale at extra cost (it recently received a nearly new battery for approx. €9,600 net).

Year of construction: 2019, condition: good (used), Sturm Coating System Description For sale is a complete industrial Sturm robotic painting system manufactured in 2019. The automated coating system was used for the serial coating of components and originates from an industrial production facility. The used paint line includes, among other components, a paint booth, drying and cooling zones, conveyor technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust air purification unit. Thanks to its automated system design, the robotic painting line is particularly suitable for industrial applications in the automotive industry, metalworking, and serial production. An inspection at the Hamburg site is possible by prior appointment. Technical Data & Scope of Delivery Ijdpfezka Sfex Ah Djtk Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture of main system: 2019 Previous operation: Three-shift operation, condition consistent with age System components: Units, drying and cooling zone, paint booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots, models KR 210L 150-2 / KR 210 2, manufactured between 2006 and 2012 Associated robot control cabinets 2x Yaskawa EPX 2900 robots 1x thermal post-treatment / exhaust air purification system, VeniaKab / RNV Condition Information Control technology: According to the plant maintenance department, the control technology is up to current technical standards Electrical and mechanical components: Predominantly in condition consistent with age or in good condition Cybersecurity Data Deletion For security reasons, all hard drives from the robots and PC-based stations were removed. Dismantling Ex Works Hamburg There are two options for dismantling, loading, and transport: You carry out the dismantling and loading yourself on site. If you do not have the necessary personnel or equipment for dismantling, we can provide the complete dismantling, professional removal from the production hall, and loading as an additional service. The costs are calculated by prior agreement and according to the work involved. Please contact us in advance if you are interested. “Everything from a single source: We are pleased to offer suitable bank financing for your project.” komplett-konzept.leasingo.de You can find further new and used items in our shop. International shipping costs available upon request.

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control Itjdpfszubtlsx Ah Dsk • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 612334X00379, Year of construction: 2020, operating hours: 2,810 h, load capacity: 750 kg, lifting height: 10,610 mm, fuel type: electric, construction height: 4,400 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,250 mm, overall weight: 8,330 kg, Equipment: lighting, Attention: The complete equipment list of the vehicle is included as a photo in the images of the ad! STILL Order Picker MX-X 80 – Used unit with premium features, single sale Vehicle Data: - Model: STILL MX-X 80 (Very Narrow Aisle Truck with Pivoting Reach Fork) - Year of manufacture: 2020 | Operating hours: approx. 2,810 h - Load capacity: 800 kg | Lift height: 8,750 mm | Height: 4,400 mm - Additional lift: 1,800 mm | Fork length: 1,250 mm | Aisle width: 2,200 mm - Pivoting reach fork: 180° swiveling, max. 1,400 kg at 600 mm LSA - Adjustable forks: hydraulic, outer width 400 – 1,650 mm Features (Selection): - Mobile personal protection system with 2 laser scanners, fully factory-integrated - Special design pivoting reach fork carriage with reinforced capacity, reach carriage for wide loads up to 2,600 mm - IZF – Inductive Guidance System with guide wire detection, lane detection, automatic aisle recognition & emergency stop on signal loss - Cabin: Combined design for standing/seated order picking, with LED work lights, warning beacon & polycarbonate windshield - Ergonomic driver’s seat (fabric-covered, height & tilt adjustable, suspended), foldable - Control panel: multifunctional, steering knob, 5 programmable favorite keys, contactless two-hand sensor, MMS terminal preparation - Safety: automatic braking, stop & absolute stop at aisle ends, rescue lowering system, RFID-controlled height limit (2 definable heights) - OPTISPEED 3.0: dynamic load display depending on fork height, automatic reach reduction - Additional equipment: Panoramic rear-view mirrors on both sides, DIN A4 writing pad, modular accessory system on cabin railing Battery & Charger: - 80V traction battery (930 Ah), low maintenance, with central water filling system (STILL) - External charger D 80/100 PXS, charging time approx. 9–11 h, 400 V / 32A CEE, LED charge status display Special features: - Extended chassis – ideal for special pallets/corlettes – no disadvantage in racking applications - Machine is currently set up and ready for demonstration - Single unit – not available as a series sale, we bought the truck ourselves 1 year ago but did not set up a warehouse Condition & Removal: Itsdpew U El Tofx Ah Dsk - Very well maintained, fully functional, no known defects - Removal only possible by crane (hall height 10 m) – disassembly required and to be organized by the buyer or by arrangement

Condition: used, Year of construction: 2018, functionality: fully functional, load capacity per storage section: 1,000 kg, total length: 37,030 mm, total height: 4,310 mm, total width: 4,590 mm, shelf height: 4,310 mm, We are offering a used, fully functional flow rack system with a two-level construction (ground floor and upper floor) for sale. This system is perfectly suited for storage and order picking according to the FIFO principle (First In – First Out) and is ideal for logistics, shipping, or manufacturing operations. The racking is optimized for cartons with dimensions of 600 x 400 x 250 mm, accommodating a total of up to 3,000 cartons. Dimensions: The entire system has a total length of approx. 37 m, divided into two sections: one continuous block (approx. 20 m), a staircase section (approx. 1.3 m), and a second block with a walk-through passage (approx. 15.6 m). The total depth is approx. 4.6 m and consists of two racking depths of 1.3 m each, as well as a central service aisle of approx. 2 m. The upright height is approx. 4.3 m; the bottom edge of the intermediate deck (upper floor) is at approx. 2 m, providing sufficient clearance for ergonomic work on the lower level. Configuration and equipment: Each bay is approx. 2.12 m wide (upright width approx. 0.1 m) and contains a total of 10 flow channels – 5 on the lower and 5 on the upper level. Shelf heights are variably adjustable via perforations in the uprights, allowing flexible adaptation to different article sizes. The shelves are equipped with roller conveyors that have a slight incline, ensuring goods and handling units automatically move to the picking side. Isdpfoyxqhvex Ah Dstk Access to the upper floor is via an integrated staircase. A central aisle between the rack rows allows loading from the rear and picking from the front. Load capacities (with evenly distributed loads): - Shelf load: 100 kg - Bay load: 1,000 kg - Mezzanine floor: 250 kg/m² Summary of core data: - Total length: 37.03 m - Overall width / depth: 4.59 m - Upright height: 4.31 m - Headroom lower level: approx. 1.98 m - Bay width: 2.12 m - Shelves per bay: 10 (5 lower / 5 upper) - Roller conveyors: yes, inclined (FIFO) - Shelf load: 100 kg - Bay load: 1,000 kg - Mezzanine floor load: 250 kg/m² The system will be dismantled at its current location prior to collection. Inspection possible by appointment. Self-collection required.

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 30,000 mm, drilling capacity: 40 mm, type of input current: three-phase, total width: 3,500 mm, drill diameter: 40 mm, input voltage: 400 V, FICEP HP35T - CNC SAWING & DRILLING LINE FOR ANGLE STEEL | YEAR 2012 | RECONDITIONED The Ficep HP35T is a CNC-controlled sawing and drilling line for the economical series processing of angle steel (L-profiles) in structural steelwork. Sawing and drilling run in a single automated pass with DSTV data connectivity, reducing handling, marking time and scrap for beam connections, gusset plates and lattice structures. CONDITION & RECONDITIONING Iodpfxsxn T Sme Ah Detk Reconditioned and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The HP35T processes equal- and unequal-leg angle steel (L-profiles) up to 350 x 350 mm leg dimension and combines sawing with two drilling spindles (max. dia. 40 mm) into one continuous machining process. Material is fed via a motorized infeed roller conveyor, hydraulically clamped and positioned under CNC control. The PC-based Ficep CNC control enables manual programming at the operator terminal as well as direct program import from structural-steel CAD systems (e.g. Tekla, SDS/2, BOCAD) via DSTV. Typical applications: structural steelwork and profile processing, lattice and mast structures, plant and steel hall construction, gusset plates and beam connections. TECHNICAL DATA - Manufacturer: Ficep | Model: HP35T | Year: 2012 | Serial number: 25029 - Machine type: CNC angle processing line (sawing & drilling line) - Condition: used, reconditioned by certified technician - Cutting process: saw - Drilling spindles: 2 x drilling spindle, max. drill dia. 40 mm - Clamping: hydraulic - Profile type: equal- and unequal-leg angle steel (L-profiles) - Max. leg dimension: up to 350 x 350 mm | Min. profile: approx. from 50 x 50 x 5 mm - Feed rate (max.): approx. up to 40 m/min - Positioning accuracy, longitudinal axis: approx. +/- 0.2 mm - Hydraulic unit motor: approx. 15 kW | Feed motor (servo): approx. 3 kW - CNC control: Ficep proprietary / PC-based - DSTV interface: direct import from structural-steel CAD - to be confirmed during inspection - Electrical connection: 400 V / 50 Hz / 3-phase + N + PE (TN-S), control voltage approx. 24 V DC - Overall machine length: approx. 30,000 mm (line incl. roller conveyor; exact dimension before loading) - Machine width: approx. 3,500 mm | Machine weight: on request Note: Values marked "approx." are reference figures and will be confirmed bindingly during inspection. SCOPE OF DELIVERY - 1 x Ficep HP35T angle steel processing line (year 2012) - 1 x hydraulic unit (integrated) - 1 x CNC control unit with operator terminal - 1 x infeed roller conveyor (motorized) - 1 x electrical control cabinet - 1 x machine documentation / operating manual (Italian/English) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options. Itedpfszhn Rqjx Ah Djk

Condition: new, Year of construction: 2026, The CORMAK Q15E16-2 electric stacker is a compact warehouse machine designed for transporting, lifting, and handling loads weighing up to 1,500 kg. Its maximum lifting height of 1,600 mm enables efficient pallet handling, loading and unloading of goods, and placing loads on low-level racks and platforms. The stacker is operator-controlled and equipped with electric drive and lifting systems, reducing physical effort and increasing the efficiency of daily material-handling operations. Its compact dimensions, overall width of 780 mm, and turning radius of 1,350 mm make it easy to maneuver in warehouses, production halls, and other areas with limited space. Key advantages of the Q15E16-2 stacker 1,500 kg load capacity – enables handling of heavier pallets and warehouse loads. 1,600 mm lifting height – suitable for loading, unloading, and placing goods on elevated surfaces and lower rack levels. Electric drive – the 0.75 kW motor improves load transport and reduces operator effort. Electric lifting – the 2.2 kW lifting motor ensures efficient load handling. Compact design – the 780 mm width and 1,350 mm turning radius facilitate operation in narrow aisles. 2 × 12 V / 85 Ah batteries – provide power for the electric drive and lifting systems. Polyurethane wheels – well suited for typical warehouse and industrial floors. Electromagnetic brake – supports safe stopping and control of the stacker during operation. 1,150 mm forks – designed for standard pallet-handling and transport operations. Efficient warehouse operation The CORMAK Q15E16-2 is designed for everyday internal material transport. Its 1,500 kg load capacity combined with a 500 mm load center allows efficient handling of loads while maintaining the machine's compact dimensions. The travel speed is 3.5 km/h with a load and 4 km/h without a load, making the stacker suitable both for precise maneuvering and for transporting goods between workstations. The Q15E16-2 uses two independent drive systems: 0.75 kW travel motor, 2.2 kW lifting motor. Equipment and key components electric drive system, electric lifting system, 1,150 mm forks, 2 × 12 V / 85 Ah batteries, polyurethane wheels, electromagnetic braking system, mast with a maximum lifting height of 1,600 mm. Technical specifications Parameter Specification Maximum lifting height 1,600 mm Load capacity 1,500 kg Load center 500 mm Fork length 1,150 mm Outer fork width 560 mm Height with forks lowered 2,090 mm Height with mast raised 2,090 mm Minimum fork height 80 mm Itjdpfx Ahezu I Ngo Djk Overall width 780 mm Overall length 1,770 mm Ground clearance 20 mm Turning radius 1,350 mm Travel speed with / without load 3.5 / 4 km/h Lifting speed with / without load 85 / 110 mm/s Lowering speed with / without load Not specified Gradeability with / without load 3 / 10% Service brake type Electromagnetic Drive motor power 0.75 kW Lifting motor power 2.2 kW Battery capacity 12 V / 85 Ah, 2 pcs. Wheel material Polyurethane Weight 390 kg

Condition: excellent (used), total length: 10,000 mm, total width: 2,800 mm, total height: 6,000 mm, Shelving system for storing vehicle wheel sets High-quality, heavy-duty shelving system for tire and wheel set storage Two identical heavy-duty shelving units are available for sale for the professional storage of vehicle wheel sets. This shelving system is ideal for car dealerships, workshops, tire retailers, logistics companies, or seasonal tire storage facilities. The design is specifically intended for space-saving and secure storage of complete wheel sets, and it enables optimal utilization of the hall height. Technical specifications Number of shelving units: 2 Length per unit: 10.0 m Height per unit: 6.0 m Depth per unit: 2.80 m Total capacity: 392 vehicle wheel sets Itedpfxszp Rdcj Ah Dsk Capacity per unit: 196 wheel sets Type: Galvanized heavy-duty shelving system

Condition: like new (used), Year of construction: 2023, Jungheinrich Pallet Racking System – Double Row – 7.5 m Height, 400 Pallet Positions, complete with 320 wire mesh decks for crosswise storage of Euro pallets. Complete Jungheinrich pallet racking system as a double row, type multi-level racking, wide aisle, from an organized warehouse clearance. Very good condition, professionally dismantled and ready for immediate shipment. Ideal for logistics companies, wholesalers, and industrial companies with hall heights from approx. 9 m. Original Jungheinrich – not a replica. Design according to DIN EN 15512:2021, racking class 400. ───── SCOPE OF DELIVERY (DOUBLE ROW) ───── - 40× Upright frames Jungheinrich type STD'B'15 Height 7,500 mm · Depth mm - 320× Beams type AUF'B'E0472 Length 2,700 mm · Profile 120/50/1.5 S235 - 320× Wire mesh decks for crosswise storage of Euro pallets - Incl. safety pins ───── TECHNICAL DATA ───── - Manufacturer: Jungheinrich AG (Original) - System: Multi-level racking, wide aisle, double row - Upright type: STD'B'15 - Upright profile: 100/65/2 S355MC - Upright height: 7,500 mm - Upright depth: mm per row - Total depth double row: = 1. mm - Bay length (clear width): 2,700 mm - Number of bays per row: 20 pieces - Total number of bays: 40 pieces - Total length of system: approx. 56,100 mm - Levels: 4 storage levels + bottom level - Clear height per level: 1,730 mm - Beam type: AUF'B'E0472 (120/50/1.5 S235) - Bay load: 2,000 kg per beam pair - Max. bay load: 8,568 kg (100% evenly distributed) - Racking class: 400 according to DIN EN 15512:2021 ───── CAPACITY ───── - 400 pallet positions (Euro pallets 1. × mm) - Crosswise storage: 2 Euro pallets per bay - 40 bays × 5 levels × 2 pallets = 400 positions - Beam depth mm = pallet rests fully on the beam ───── WIRE MESH DECKS (320 PIECES INCLUDED) ───── ✔ Precisely sized for bay dimensions 2,700 × mm ✔ Ideal for crosswise storage of Euro pallets ✔ Secure protection against smaller loads slipping ✔ Meets requirements for ESFR sprinkler systems ✔ Optimal fire protection due to open surface ───── CONDITION ───── - Very good condition from an organized warehouse clearance - Original paint in Enzianblau (RAL 5010) and Narzissengelb (RAL 1007) intact - No damage to claws, frames, or corrosion - Original nameplate with load values available ───── OUR SERVICE ───── ✔ Racking rental – flexible for projects & seasonal needs ✔ Assembly throughout Germany by our own team ✔ Racking inspection according to DIN EN 15635 by a certified racking inspector ✔ Dismantling, removal & Reuse from a single source ✔ Delivery by forwarding agent can be organized ───── PRICE ───── - Invoice with VAT shown – eligible for input tax deduction - For remaining stock after complete inquiries, individual sale of individual components is also possible ───── PICKUP & DELIVERY ───── ✔ Location: 99428 Grammetal (Thuringia, A4 Erfurt-West) Iodezrrxajpfx Ah Detk ✔ Loading with a forklift on site is possible ✔ Delivery by forwarding agent throughout Germany upon request

Condition: good (used), Year of construction: 2006, Pallet racking, Nedcon, approx. 9.70m high, min. 1 ton / pallet. Approx. 9,700 pallet spaces - used: Price ex works: €109,500 (net), disassembled, packaged, and loaded! Price for larger quantities: upon request! Itjdpfszd Ttvsx Ah Dok Hall 6 Manufacturer: Nedcon Type: NR1 Year of manufacture: 2006 Number of frames: approx. 608 pieces Frame height: approx. 9.70m Frame depth: approx. 1.10m Frame width: approx. 12cm Crossbars: Length: 1.80m = 168 pieces Length: 2.70m = approx. 2,184 pieces Length: 3.60m = approx. 2,142 pieces Crossbar height: approx. 12cm Bay height: 2,700mm Crossbar length: 2.70m: Bay load, level 1: 3,600kg Levels 2, 3, 4: 3,000kg Field load: 12,000kg Crossbar length: 2.70m: Crossbar length: 3.60m: Bay load, level 1: 4,800kg Levels 2, 3, 4: 4,000kg Field load: 16,000kg In case of complete purchase, including existing end-of-aisle protection / side protection. Condition: good Available: from approx. September 2026 Location: Hamburg

Condition: good (used), Year of construction: 2006, Pallet racking system, Jungheinrich, frame height approx. 8m, 500kg/pallet location, approx. 4,632 locations – used: Price ex-location: €49,500 (net), disassembled, packaged and loaded! Ijdozd Tzyjpfx Ah Dotk Price for larger quantities: upon request! Hall 4 Manufacturer: Jungheinrich Type: B Year of manufacture: 2006 Number of frames: approx. 204 Upright profile: B13 Frame depth: approx. 1.10m Frame height: approx. 8.25m Frame width: approx. 8cm Beams: Length: 3.60m = approx. 1,908 Load capacity per level: 2,000kg = 500kg per pallet Bay load: 8,000kg at max. bay height: 2m In the event of complete purchase, including existing end-of-aisle protection/side protection, spacers, etc. Whether the grid decking shown is included needs to be clarified. Condition: good Available: from approx. September 2026 Location: Hamburg

Condition: refurbished (used), Year of construction: 2024, operating hours: 772 h, functionality: fully functional, working width: 510 mm, area performance: 3,060 m²/h, overall weight: 235 kg, water tank capacity: 50 l, battery voltage: 24 V, The Kärcher B50 W Bp Pack 115Ah D51+Dose+Rinse+Autofill is a compact yet powerful scrubber-dryer equipped with numerous innovative features. It features a stepless drive, a detergent dosing system, automatic shut-off of the fresh water supply during filling, and a dirty water tank rinsing system. Additionally, the machine can be configured via app, providing access to maintenance and troubleshooting assistance. Itsdpfx Aheyrquho Djk We have completely overhauled the Kärcher B50 W, checking and cleaning all components for functionality. The brush deck and suction bar have been sandblasted and newly powder-coated in our facility. The machine is fitted with two new maintenance-free gel batteries that can be conveniently charged using the integrated charger. New suction lips, a new brush, and a mop are included in the delivery scope. The machine is ideal for daily cleaning of workshops, schools, sports halls, or similar facilities. Technical data: Working width: 510 mm Tank capacity: 50 liters / 50 liters (fresh/dirty water) Operating time: max. 3 hours Area coverage: 3,060 m²/h

Condition: used, mileage: 1 km, first registration: 01/1996, color: silver, driver cabin: other, gearing type: other, loading space length: 12,200 mm, loading space width: 26,900 mm, loading space height: 6,000 mm, Year of construction: 1996, Vehicle location: Bovenden. Itodpfx Ahji Rnhae Dek Structure: mobile exhibition hall, manufacturer WILLE, approximately 30m wide, approximately 20m deep, consisting of 2 container trailers, numbers 62732 and 62733, structural components, and accessories. Lightweight aluminum pavilion substructure in a semi-circular design, front side with plastic double-panel cladding, canvas roof covering, rear anchoring to the roof edges of the two semi-trailer units, partial seating, stage, partially rubber flooring, all documents available. For a more detailed description, please request it. The hall had an original price of over 400,000 Euros. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 2012, Exposé for Hall Rental Production and assembly hall ready for occupancy Fully equipped - 850 m² - Compressor system available - 40.0 t overhead crane (2 x 20 t rotating cranes) Ijdpfx Aeygkinoh Djtk - 10.0 t overhead crane - 5.0 t gantry crane - 20.0 t overhead crane - 12.5 t overhead crane - Millutensil MIL303 spotting press - Crane hook height: 7 m - Truck entrance gate height: 4.5 x 5 meters - Workshop trolley with tools and lifting gear available - Foreman’s office and meeting room with air conditioning - Ladies and gents restroom - Lathe and grinding machine available - Fiber optic connection available (contract with Telekom possible) Available for immediate rent Location: 35232 Dautphetal, Industriestr. 9 Viewings by appointment possible

Condition: used, functionality: unexamined, input voltage: 380 V, The machine (or at least a part of it) is an old coffee pad recycling (CPR-30) machine (see appendix). This shredder and blade assembly was used to tear open paper coffee pads and then separate the pad from the coffee using a vibrating screen located underneath the machine. Perhaps this machine is also suitable for other materials. Itjdpfszvfxnex Ah Dek Price is per unit.

Condition: used, mileage: 60,784 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, first registration: 12/2002, emission class: euro3, color: white, brakes: retarder, number of seats: 11, Year of construction: 2002, Equipment: ABS, parking heater, Beautiful MB Vario 814D from official ownership / state police: +++ Bodywork thoroughly refurbished and partially repainted on the lower sections +++ Version configured as a bus (group transport vehicle) MR / high-roof with auxiliary heating, driver airbag, ABS, and differential lock on the rear axle, as well as a retarder. The retarder is an electric, wear-free eddy current brake for speed adjustment. The bodywork was professionally repaired and then the rear section was partially repainted in our own workshop. We disassemble the vehicles beforehand and, for example, permanently seal the body seams with elastic material after painting. The chassis/frame of this Vario was also partially de-rusted and painted by us, and finally protected with wax for long-term preservation. Additionally, this Vario received a fresh inspection, including engine oil and brake fluid change, all four batteries replaced, and a new air dryer for the braking system. Furthermore, the plastic glazing in the cab was replaced with genuine glass. Due to their good insulating properties, the plastic windows were retained in the rear section. An ideal base for a spacious motorhome — the technical conversion to "So-KFZ Wohnmobil" registration (special-purpose vehicle/motorhome) can be carried out for you for an extra charge of €600. In this context, the vehicle would also receive an exterior 220V power connection with RCD/FI circuit breaker and two interior sockets. Ijdpfxoyxuv De Ah Dotk General information about the MB Vario 814D: The auxiliary heating works very efficiently: This is a hot water circulation heating system with convectors in the passenger compartment for draft-free heating. Top speed thanks to long axle ratio: according to paperwork, vmax 120 km/h. Total of 11 seats; the passenger compartment seats are comfortable recliners — with adjustable backrests and armrests. In addition, the left inner seats can be shifted about 10 cm into the aisle for more freedom of movement. There are three effective roof hatches in total. Interior dimensions from the driver’s seat: 4000 x 1850 x 1900 mm (L x W x H) +++ Subject to error, changes, and prior sale +++

Condition: used, functionality: fully functional, A set of 24 industrial axial fans from an active shipyard operation. The set mainly includes large axial fans with protective grilles (see photo), as well as two blue/black high-performance blowers. Suitable for: - Ventilation of halls/workshops - Drying of components, paint booths, renovation sites - Ventilation of construction sites, tunnels/tanks - Event technology, cooling, emergency ventilation - Shipbuilding / shipyards Preferably sold as a set (entire lot). Individual units can be sold separately by arrangement (approx. 100 EUR per unit). All devices are functional, with minor signs of wear typical for shipyard use. Originates from the shipyard operation of Strela Shiprepair GmbH (Stralsund). Iodpfx Aozawhwoh Dstk Technical data: - Quantity: 24 units - Design: Axial fan with protective grille - Application: Industry / construction / shipbuilding / event technology - Storage: in wire mesh box (included) - Connection: 230 V / 400 V (mixed assortment, check on site) Collection / Transport: Self-collection in Stralsund. Wire mesh box (steel) included on request. Shipping via freight forwarder on pallets by arrangement (several pallets). Total price 2,400 EUR net, negotiable, for all 24 units + wire mesh box; individual sale approx. 100 EUR/unit. Contact: [NAME], Tel. [TELEPHONE], [EMAIL]

Condition: new, Year of construction: 2026, CORMAK WRHS 1610 Mast Pallet Truck is a professional device designed for fast and efficient lifting and transporting of heavy loads in warehouses, production halls, and other industrial environments. Thanks to its advanced construction and high-quality components, this mast pallet truck provides reliability, efficiency, and safety during daily operations. Its main advantages are a high load capacity and significant lifting height, making it an ideal solution for handling pallets and working as a pallet stacker in various industrial applications. Main advantages of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck has been designed for demanding users who require durability, high performance, and operational safety. Its robust construction and functional solutions make it an essential tool for warehouse operations. Key benefits: High load capacity – a maximum lifting capacity of 1000 kg allows the truck to handle heavy pallets and large-sized loads efficiently. Lifting height of 1600 mm – enables convenient storage of goods on warehouse racks, helping to optimize available storage space. Polyurethane wheels – high-quality wheels provide smooth movement, quiet operation, and long service life, even under demanding warehouse conditions. Ergonomic design – the mast and handle are designed for operator comfort, allowing easy handling while reducing physical strain. Durable and stable construction – the strong steel mast ensures stability during lifting and lowering operations, guaranteeing reliable and safe performance. Construction and technology of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck combines high-quality workmanship with modern technical solutions. Mast construction The mast is made of high-quality steel, providing excellent resistance to mechanical damage. Its rigid design ensures load stability and safe transportation during lifting operations. Wheels and rollers The truck is equipped with durable polyurethane wheels with dimensions of 180 × 50 mm and fork rollers measuring 74 × 70 mm. These components ensure smooth, quiet, and stable movement on various types of surfaces. Ergonomic operator handle The manual control handle has been designed to provide comfortable operation and easy maneuvering, even in narrow warehouse aisles. Advanced lifting system The WRHS 1610 features: Two lifting options: manual and foot-operated lifting Stepless fork lowering speed adjustment Truck locking system Brakes on both steering wheels for improved safety and stability during operation Standard equipment Load capacity: 1000 kg Lifting height: 1600 mm Steel mast with reinforced construction Polyurethane steering wheels Fork rollers for smooth movement Manual and foot-operated lifting system Itedpfxericgas Ah Dsk Adjustable fork lowering speed Locking system and brakes on both steering wheels Ergonomic operating handle Technical specifications Parameter Value Load capacity 1000 kg Lifting height 1600 mm Fork dimensions (L × W) 1150 × 145 mm External fork width 550 mm Distance between forks 230 mm Height with lowered forks 1970 mm Height with raised forks 1970 mm Minimum fork height 90 mm Overall length 1630 mm Overall width 740 mm Turning radius 1400 mm Steering wheels 180 × 50 mm Fork rollers 74 × 70 mm Weight 181 kg

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). Itedpfjxg Ickex Ah Djk The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031