Used 280 Sx for sale (2,772)

Condition: used, Year of construction: 2007, functionality: fully functional, CN ROSILIO TBI 280 TURRET LATHE Machining Capabilities • Swing over bed: 280 mm • Maximum machining diameter: 220 to 250 mm, depending on the version • Maximum machining length (Z-axis): 350 mm • X-axis travel: 145 mm (including 20 mm below zero) Spindle • Maximum speed: 6000 rpm • Spindle nose: A2 5 • Motor power: 5.5 / 7.5 kW • Spindle bore: 42 mm • Chuck: hydraulic Turret • 8-position VDI 30 intelligent turret • Coolant supply to each position Available CNC Controls • Siemens 802D SL General Data • Rapid traverse rates: o X-axis: 10 to 15 m/min o Z-axis: 20 to 30 m/min Tailstock: o CM4, sleeve Ø70 mm, travel 65 mm, total travel 400 mm Footprint: 2000 × 1450 × 1800 mm Fjdpozbidtsfx Ahpopi Weight: 2200 kg

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Fpedpfszhlr Esx Ahpsi Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Ventilator, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, smoke gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 280-2 -Speed: 2800 rpm -Power: 0.4 kW -Protection class: IP 44 -Quantity: 1 piece available -Dimensions: Ø 280 x 175 mm Fjdpfx Ajqpl Rxjhpjpi -Weight: 8.5 kg

Condition: good (used), indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete Fpjdpfeu Inr Ajx Ahpei -Weight: 1270/720 kg/piece / 3980 kg total

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable -Hole: Ø 32 mm -Dimensions: 320/280/H75 mm Fodpfxjycfyao Ahpepi -Weight: 13.3 kg

Condition: good (used), Variator pulley, Vario adjustment pulley, Vario pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Berges, Vario pulley with pressure flag Fpsdpjt Ddcnsfx Ahpei -Type: 280 -Outer pulley diameter: 296 mm -Hole: Ø38 x 160 mm -Dimensions: Ø296 x 165 mm -Weight: 7,6 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck Fodpfxof R Iw Aj Ahpopi -Outside: Ø 280 mm -Inside: Ø 105 mm -Mounting: Short taper 8 (139.7 mm) -Weight: 13 kg

Condition: good (used), Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, steep conveyor, steep conveyor belt Fedpjrkp Niefx Ahpepi -Conveyor belt: conveyor belt, VA housing -Speed: 8 m/min -Conveyor belt width: 280 mm -Conveyor belt length: 3490 mm, dimensions see technical photo. drawing -Outlet height: approx. 535 mm, height adjustable -Individual components: see photos -Total dimensions: 3500/590/H670 mm -Weight: 81 kg

Condition: used, Variator pulley, Vario adjustment pulley, Vario pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable Fpsdpfx Ahjt Dddlepoi -Manufacturer: Berges, Vario pulley -Type: 280 -Outer pulley diameter: 295 mm -Hole: Ø38 x 160 mm -Dimensions: Ø295 x 170 mm -Weight: 7.8 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 280 mm -Type designation: E030ZM3 R 01 -Piston rod: Ø 30 mm -Hole: Ø 20 mm, see photos -Number: 2x cylinders available -Price: per piece Fpedpfovyglbex Ahpji -Dimensions: 350/75/H76 mm -Weight: 3.8 kg/piece

Condition: used, fuel type: electric, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tipping cylinders Fedpfeiy R Upex Ahpjpi -Manufacturer: GSL (German Standard Lift), hydraulic cylinder with control valve stroke 280 mm -Type designation: D120050AAV60330 T28 -Piston rod: Ø 50 mm -Recording. Ø 40mm -Dimensions: 615/145/H230 mm -Weight: 40 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 280 mm -Inside: Ø 142 - 145 mm Fodpfx Ajf Ek I Dohpopi -Dimension: Ø 280 x 45 mm -Weight: 13 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 280 mm -Inside: Ø 105 mm -Take: cone Ø 138 mm/short cone 8 -Dimension: Ø 280 x 35 mm -Weight: 13 kg Fodpsf Ewcxefx Ahpjpi

Condition: good (used), V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing -V-belt pulley: 4-groove pulley 280/4 -V-belt width: 17 mm -Taper bushing mount: Ø 65 mm (can be replaced) -Quantity: 1x V-belt pulley available -Dimensions: Ø 287 x 82 mm Fsdolu N Ehepfx Ahpopi -Weight: 14.4 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor, frequency-controlled geared motor, adjustable geared motor, variable speed geared motor -Manufacturer: SEW-Eurodrive, adjustable geared motor -Type RF07 DRS71S4/MM03 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 25 to 280 rpm / i= 11.18 -Power: 0.37/0.074 kW Fpjdpfx Ajq Syt Tohpoi -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 360/250/H180 mm -Weight: 10 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder Fjdefbhz Ispfx Ahpspi -Topslide: PD44645-0280 -Stroke travel: 280 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 805/65/H65 mm -Weight: 3.6 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier Fpodov Tv Tnopfx Ahpji -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg

Condition: good (used), Electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 280 MV4 Y4 Q4 -Power: 90 kW -Speed: 1480 rpm -Shaft: Ø 75 x 110 mm -Protection class: IP54 -Design: B3 -Quantity: 1 piece available -Price: per piece -Dimensions: 1050/560/H685 mm Fpsdpfxevw Si To Ahpji -Weight: 644 kg/pc.

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller -Puller: Grinding wheel puller -Dimensions: see photos Fjdpewuqtdjfx Ahpopi -Dimensions: 280/80/H185 mm -Weight: 8.3 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm Fpedpfx Aob A Nbcohpoi -Clamping depth: max. 280 mm -Dimensions: 600/250/H140 mm -Weight: 50 kg

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: 5-groove pulley type SPB 280-5 3535 -V-belt width: 17 mm -Receptacle: Ø126/115 mm for taper clamping bush 3535 (Ø can be changed) Fpsdpfx Ahjpix Nnjpsi -Dimension: Ø287 x 100 mm -Weight: 18.8kg

Condition: good (used), High-pressure radial fan, dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Exhaust gas exhaust fan -E-motor: Lammers 400/690 V/3 kW -Fan: Hansa Ventilatorenbau Type BC 280-5/4K-X/UX 1101 -Speed: 3179 rpm -Volume output: 2160 m³/h -Connection input: Ø 735 mm -Connection output: 365 x 310 mm Fpsdpfeff Aq Ajx Ahpei -Dimensions: 1300/740/H820 mm -Weight: 153 kg

Condition: excellent (used), Year of construction: 1967, Multi-spindle head, multi-spindle drill head, drilling gear -Multi-spindle head recording drive: MK4 -Max. Number of drill heads: 9 pieces Fjdsd E Hlaepfx Ahpepi -Number of cardan shafts: 4 pieces with MK1 mount -Take drill: MK1 -Largest drilling pattern Dimensions of the drill: 280 x 280 mm -Multi-spindle heads: are variable tools -for various processing: such as drilling, tapping, countersinking, reaming, -with which several holes: can be machined at once -Dimensions: 330/330/H515 mm -Weight: 36 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 280 mm -Type: E030ZM60279 T18 -Piston rod: Ø 30 mm -mount. Ø 19 mm -Dimensions: 395/83/H70 mm Fpsdpfevt S A Sox Ahpoi -Weight: 4.4 kg

Condition: used, clamping plate, clamping table, clamping cube, press table Fpedpfsu N Siuex Ahpoi -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm -Dimensions: see photo technical drawing -Dimensions: 500/280/H180 mm -Weight: 53 kg