Semi-automatic saw

MEP MEP SHARK 280

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. Lodpfxsdf Ud So Ab Noah - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output Lasdpfst U Uiaex Ab Noh ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing)

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lajdpfextbkusx Ab Noh

Condition: excellent (used), Year of construction: 2013, - Tools Ø 500 mm - Blade speed 2800 rpm - Weight approx. 1500 kg Laedpex N R H Tjfx Ab Neh

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Lajdpox N Ih Iofx Ab Noh Drilling capacity 32mm in steel Thread cutting device Coolant system Safety device at the drill Completely overhauled in 2026

Condition: good (used), Year of construction: 2002, MEP automatic bandsaw Model Shark 320 AXI Year : 2002 Capacity round : 260 mm. Capacity 45 / 60 degrees : 230 mm. / 150 mm. Lajdsyvzvxepfx Ab Njh Capacity square. : 320 x 220 mm. Speed: 40 - 80 m./min.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. Lsdpjzg Dx Ujfx Ab Noah These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: good (used), functionality: fully functional, rotational speed (max.): 1,400 rpm, rotational speed (min.): 32 rpm, throat depth: 355 mm, overall weight: 1,700 kg, drilling capacity: 50 mm, For sale: 1 used pillar drilling machine Manufacturer: WMW Saalfeld Type: BK50 AI Drilling capacity in steel: 50mm Thrust: 355mm Spindle mount: MK5 Speed: 32 - 1,400 rpm Table size: 770 x 640mm Clamping surface: 630 x 550mm Base plate: 490 x 530mm Machine weight: 1.7t Lsdpfx Abovytw Ds Njah The machine can be viewed in our warehouse in 09599 Freiberg.

Condition: excellent (used), Year of construction: 2014, Cutting capacity, circular: 255 mm Ledpfjznh Nmox Ab Noah Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, continuously adjustable: 20 - 90 m/min Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 80 mm, turning diameter: 400 mm, center height: 220 mm, turning length: 1,500 mm, quill stroke: 230 mm, quill diameter: 90 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 240 mm, bed width: 400 mm, Equipment: rotational speed infinitely variable, Production Lathe MEXPOL TUS 400 – Available from Stock The MEXPOL TUS 400 is a high-performance production lathe ideal for precise and efficient machining tasks. With its robust construction, powerful main drive, and comprehensive standard equipment, this machine is perfectly suited for continuous industrial operation. Technical Specifications • Center height: 220 mm Laodpeyhzgqsfx Ab Njh • Swing diameter over bed: 400 mm • Swing diameter over cross slide: 240 mm • Distance between centers: 1,500 mm • Bed width: 400 mm • Spindle bore: 80 mm • Spindle mount: DIN 55027 / 8 • Main drive: 11 kW with frequency inverter • Speed range: 25 – 2,000 rpm (3 gear stages) • Maximum spindle torque: 1,200 Nm • Max. workpiece weight: o Between centers: 150 kg o In chuck with tailstock: 600 kg o With steady rest: up to 1,300 kg • Accuracy according to DIN 8606 • Electrical equipment: 400 V / 50 Hz • Noise level: max. 84 dB(A) Feeds and Thread Cutting • Longitudinal feed: 0.04 – 12 mm/rev • Cross feed: 0.02 – 6 mm/rev • Rapid traverse longitudinal / cross: 3,800 / 1,900 mm/min • Metric, imperial, module, and DP threads without change gears Slides • Cross slide travel: 315 mm • Top slide travel: 130 mm Tailstock • Quill diameter: 90 mm • Quill taper: Morse taper MT 5 • Quill stroke: 230 mm Weight • Machine weight: approx. 2,500 kg Standard Equipment (excerpt) • Frequency-controlled main drive • Multifix quick-change tool post, size C • Central lubrication for carriage, headstock, and feed gearbox • Coolant system • Safety chuck guard with interlock • Travelling chip guard and rear chip wall • CE marking and declaration of conformity • Machine color: RAL 7035 / RAL 7011 Options • FAGOR INNOVA 30iT digital readout