Used 3 Axis Lathe for sale (71,026)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MC 0120, turning diameter over cross slide: 270 mm, spindle bore: 70 mm, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, turning diameter over top slide: 270 mm, center height: 230 mm, turning length: 1,500 mm, feed length X-axis: 1,500 mm, total length: 3,045 mm, total width: 1,200 mm, total height: 1,450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 2,700 kg, Colchester Mascot Gap Bed Lathe Model: Mascot 2000 Vari Speed Swing Over Bed: 460mm Swing In Gap: 730 x 216mm Lrodpfxszux Ele Aazet Distance Between Centres: 1500mm Spindle Speeds: 60-2000 RPM (variable) Spindle Bore: 76mm Motor: 11KW Machine With: 300mm 3 Jaw Chuck 600mm Face Plate Digital Readout Quick Change Toolpost with Holders Dimensions: 3045 x 1200 x 1450mm high Weight: 2700 Kgs

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Ledpfey Sub Hjx Aazsrt Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: as good as new (ex-display), Year of construction: 2023, Control : Heidenhain TNC 640 Travels X : 1,020 mm Travels Y : 520 mm Travels Z : 610 mm Clamping surface (L x B) : 1,160 x 520 Table load : 750 kg Spindle Speed : 15,000 rpm direct Tool holder: SK40 (BigPlus) DIN69872 In general Tool changer : 30-stations Lrsdpfx Aast Dizvszot Machine bed : Meehanite cast Repetitive accuracy : 0.008 mm Equipment Chip conveyor Coolant supply Elect. handwheel high pressure coolant

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe Okuma LB 3000 EX II-MY C 450 Control system: OSP-300LA Year of manufacture: 2018 Internal machine number: 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm Travel in X-axis: 260 mm Travel in Y-axis: 120 mm Travel in Z-axis: 510 mm Travel in C-axis: 360 mm Max. turning diameter: 340 mm Max. turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: - Chip conveyor Lrodpfx Aaoz D Tt Tezst - One-touch IGF - Touch setter - Main spindle Kitagawa B210 - Coolant system

Condition: repair required (used), Year of construction: 1998, operating hours: 6,000 h, functionality: limited functionality, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 221 mm, total length: 2,500 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 3,750 kg, Equipment: documentation/manual, We are offering this Spinner TC46-MC CNC lathe, manufactured in 1998, which requires repairs. The turret needs to be overhauled. The machine is powered on. Otherwise, it has no other defects. Serial number: 040235 Type: TC46-MC Voltage: 3 × 400 V Current: 50 A Frequency: 50/60 Hz Lodoz Ekq Eopfx Aazort We will gladly load the machine onto a truck for the customer using a forklift. If you have any questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. • A-axis rotation: +90° / -120° • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm • Rapid feed (all axes): 50 m/min • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm • Tool magazine: 64 positions (expandable to 166) Lrsdpfx Aeyia Tlsazjt Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: H513201129, type of input current: AC, input voltage: 220 V, measuring range X-axis: 750 mm, measuring range Y-axis: 50 mm, measuring range Z-axis: 250 mm, Selling a high-quality and fully functional Sony Magnescale 3-axis digital measuring system for machine tools, milling machines, special machines, or measurement tasks. The system comes from an industrial application and is in used, good condition. All components are functional, and the display works perfectly. Scope of delivery: Sony LH51-3 digital display (3 axes) Sony SR128-025 linear scale – measuring length 250 mm Sony SR128-045 linear scale – measuring length 450 mm Sony SR128-075 linear scale – measuring length 750 mm Sony TS-1 3D touch probe Extension cable Connection cable as shown in the photos Operating manual (digital as a PDF file) Lsdpfx Aszmxk Soazjrt Technical data: 3-axis digital display Sony LH51-3 Measuring system: Sony Magnescale Axis X: SR128-075 – measuring length 750 mm Axis Y: SR128-045 – measuring length 450 mm Axis Z: SR128-025 – measuring length 250 mm Resolution up to 0.001 mm (adjustable depending on the device) Absolute and incremental mode Radius/diameter display Reference and zero point functions Industrial design for machine tools Note: Only the items shown in the photos are included in the sale. Please refer to the photos. Inspection and functional testing are possible by arrangement. A functional video can be sent before shipping. Private sale, excluding any warranty, guarantee, or right of return. Keywords: Sony Magnescale, Sony LH51, LH51-3, Sony SR128, Sony TS-1, digital display, DRO, digital readout, displacement measuring system, linear scale, linear encoder, position display, milling machine, lathe, machine tool, CNC, machine retrofit, Heidenhain, Acu-Rite, Accurite, Fagor, Newall, Mitutoyo, RSF Elektronik, Renishaw, Renishaw encoder, Renishaw linear scale, Renishaw measuring probe, Sino, Easson, Anilam, machine DRO, scale for milling machine, digital display for milling machine, drilling machine.

Condition: used, functionality: unexamined, machine/vehicle number: Euro-C-A574, Used Mitutoyo Euro-C-A574 measuring table, 3-axis, in unknown functional condition (for parts or repair) Manufacturer: Mitutoyo Model: EURO-APEX574 | CMMC-F | TEMPIF-UC2 (& RENISHAW pi200-3) Ljdpfx Asw Hqrwjazsrt With red securing material for transport (see photo) Measuring range: 500 x 700 x 400 mm Weight: ~450 kg

Condition: used, functionality: unexamined, machine/vehicle number: BM 86B320, ELBO VISUALIZER - DIVIDING TABLE - VISE Lrodpfx Aajy Ndqxjzst

Condition: new, Year of construction: 2025, 3 axis welding rotary table Protec KT 10 000 HV with height adjustment Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 dimensions: height tilted min: 1050mm height tilted max: 2200mm Lredpfxjmk T Rbe Aazot height horizontal min: 1360mm diameter of the clamping disk 2000mm length 3250mm, width 1700mm speed from 0,05 to approx. 0,6 rpm.

Condition: used, Year of construction: 1960, functionality: fully functional, machine/vehicle number: 3183, Parameters: Lrsdpfx Ajwqlc Ejazot Swing over bed: 4000 mm Distance between lathe tips: 30,000 mm Speed: 0.5-80 rpm Workpiece weight: 160 t Control system: CNC SIEMENS SINUMERIK 840 D

Condition: good (used), functionality: fully functional, Machine Name - Colchester Machine Model - Triumph 2000 Description - 3 Jaw Chuck Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post Lrodpfx Asuk H Rbeazot 2 axis Accurite DRO Gap bed Tailstock Coolant pump and tray

Condition: like new (used), functionality: fully functional, total width: 1,400 mm, total length: 2,750 mm, total height: 1,840 mm, overall weight: 770 kg, empty load weight: 770 kg, Copy lathe – precision and efficiency in one A professional copy lathe designed for series production and precise machining of wooden components. The use of a copying mechanism enables quick and repeatable production of parts, which significantly increases work efficiency. The machine features a robust construction, stable operation, and a wide range of rotational speeds, allowing parameters to be adjusted for different materials and diameters. Ideal for the production of table legs, chair legs, furniture components, and other turned parts. - Large turning diameter - Copying mechanism – repeatability of parts - Smooth feed rate adjustment - Powerful and reliable motor - Ready for operation TECHNICAL SPECIFICATIONS: - Maximum distance between centers: 1600 mm - Height of centers above the bed: 250 mm - Maximum turning diameter (manual): 500 mm - Maximum turning diameter with copying: 150 mm - Maximum diameter with a moving support: 90 mm - Drive and tailstock mounting: 3 CM - Carriage feed rate: 0 – 6 m/min - Carriage return speed: 7.33 m/min - Spindle speed change - Spindle motor power: - Installed power: 3.7 kW Lrsdsz A A Drspfx Aazst - Operating pressure of the hydraulic system: 25 bar MACHINE DIMENSIONS - Length 2750 mm - Width 1400 mm - Height 1840 mm - Weight: 770 kg Financing options available through leasing or installment plans. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Machine transport throughout the country!

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 40,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,100 mm, total length: 6,500 mm, total width: 3,100 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, spindle motor power: 27,000 W, 3-axis CNC machine (VMC) Hedelius - BC80 /2300 Make: Hedelius Type: BC80 /2300 Control: HeidenHain iTNC530 Year: 2005 X - Travel: 2340mm Y - Travel: 800mm Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Lrjdpfx Ajy Enzaoazet Speeds / ranges: 8000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6500mm Width: 3100mm Height: 3100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2022, Automatic mortising machine with 3 heads ideal for mortising of doors, gates, gate posts, general joinery Worktable dimensions 3000 x 300mm Cast iron construction to give maximum rigidity 3 x vertical hydraulic work piece clamps 3 x horizontal hydraulic work piece clamps Speed movement is adjustable through hydraulics Automatic operation 3 x Mortising heads each : Ledpfx Ajzd Uy Reazjrt Manually positioned in X axis with mechanical locks Mechanical siko readouts for height position - Z axis Double eccentric operation of the heads (patented design) Each mortise head Motor HP3 RPM 2800mm Max distance between 2 x outside mortising heads 2800mm Min distance between 2 x outside heads 180mm - centre to centre of mortise. Dust extraction outlets 100mm Hydraulic pump motor 10hp Serial nr - 127-22 Year - 2022 CE

Condition: like new (used), Year of construction: 2024, functionality: fully functional, FARO Quantum M Max 3.0m – 7-axis measuring arm for sale incl. Polyworks We, R+S Metallbearbeitung & Lasertechnik GmbH & Co. KG, are selling a FARO Quantum M Max 3.0 m 7-axis FaroArm, 6th generation. Features - FaroArm Quantum M Max, 3.0 m, 7 axes - Bluetooth and Wi-Fi technology Ljdpjw R Tk Nefx Aazort - Calibration kit - Mounting plate - iProbes (3 mm & 6 mm) - USB cable & power supply - Robust transport case - 1 rechargeable battery Additionally: - Magnetic Mount G3+ (150 mm) - iProbe adapter (M4 thread) - Software: Polyworks incl. IGES & STEP - "Complete Care" service plan valid for 5 years (maintenance, calibration & repairs) (4 years remaining) Location: 32130 Enger, Germany If you are interested or have any questions, we look forward to hearing from you.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About Us Since 2014, we have been developing and manufacturing our machines in Austria as a machine manufacturer. In addition to our standard machines, which can be individually customized, we are also able to offer special solutions. We would be happy to send you our product catalog; simply contact us. HSC 544HP Machining Center 3rd Generation Key Data - 500x400x330mm travel range - BT30 spindle with 20,000 rpm and 10.5 Nm (other spindle types available) - 18-tool magazine - Feed rate up to 25 m/min - Compact dimensions of W 1,460 x D 1,470 x H 2,110 mm and a weight of approximately 2,200 kg The machines are configured and assembled according to customer specifications. Depending on the requirements, numerous options are available, such as different spindle types up to 60,000 rpm, different cooling systems, direct path measuring system, integrated automation, etc. Lrodpfjzu Ikwjx Aazjt Control System - CS-Lab / AMT - Clear and customizable user interface and easy operation via touchscreen - S-curve acceleration for dynamic axis movement while maintaining high accuracy - Integration of, for example, robots, pallet changers, workpiece changers, etc. is possible Machine Frame - Solid machine frame made of mineral casting, optimized by means of FEM simulations - Very high vibration damping, stiffness, and ideal thermal behavior - Use of roller guides instead of conventional ball guides for maximum stiffness - High-speed ball screws with reduced heat generation Drive System - AC servo drives, well-matched to the axes, for high contour accuracy - Directly driven and backlash-free ball screws Overview of Spindle Types 60,000 rpm I 0.3 Nm 40,000 rpm I 0.9 Nm 36,000 rpm I 2.4 Nm 30,000 rpm I 3.5 Nm 30,000 rpm I 6.0 Nm 20,000 rpm I 10.5 Nm We would be happy to provide you with expert and comprehensive advice in order to offer you the perfect solution for your machining task.

Condition: good (used), We are offering an exceptionally good precision lathe. This machine is probably the best German-made lathe in its class ever built. BOHEHRINGER precision lathe, model DUE 630 Year of manufacture: 1991 Serial number: 1032.1239-08 Center height: 320 mm Swing diameter over bed: 640 mm Distance between centers: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 82 mm Spindle head: DIN 55022, size 8 Drive power: 24 kW Max. torque: 2,000 Nm 24 speeds: 9 – 1,800 rpm 60 cross feed rates: 0.03 – 28 mm/rev 60 longitudinal feed rates: 0.06 – 56 mm/rev Footprint: L x W approx. 4,000 x 1,525 mm Weight: approx. 4,500 kg Lrjdpozlm Ucofx Aazot Accessories: - 3-axis digital display HEIDENHAIN - Parat tool holder including 4 holders - Coolant system - Chip guard back panel - 3-jaw chuck T 315 mm including jaws - Roller strip cover for lead screw support to the bed - Machine light - Operating manual - Wiring diagram - Rapid traverse in longitudinal and cross slides Condition: The machine has been completely technically inspected and can be inspected under power if desired. The gearbox runs very well. The bed guides are also in good condition.

Condition: used, functionality: fully functional, spindle bore: 100 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, type of input current: three-phase, Manufacturer: Gildemeister Heidenreich&Harbeck Machine type: Centre lathe Condition: functional Lsdpfezxpppsx Aazjrt Centre distance: 2100 mm Swinging diameter over bed: 340 mm Swinging diameter over carriage: 200 mm Spindle bore: 100 mm Spindle speed: 9 – 1800 rpm Motor power: 15 kW Mains voltage: 380 V Carriage travel: 300 mm Compound slide travel: 140 mm Tailstock travel: ~ 2000 mm Tailstock spindle diameter: 80 mm Tailstock spindle stroke: 150 mm Tailstock mount: MK5 Bed width: 320 mm / 410 mm Digital measuring system: X-axis, Z-axis

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 69 Turning length: 500 mm Turning diameter: 340 mm Swinging diameter over bed: 530 mm Spindle speed: 4,200 rpm Tool holder: BMT 60 Tool turret, 12 stations (powered) C-axis: 0.001 degrees Equipment: - One-touch IGF - Chip conveyor Ledpfx Ajzwlw Tjazort - Touch setter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Condition: used, Year of construction: 1999, operating hours: 72,805 h, functionality: fully functional, spindle bore: 65 mm, total length: 3,074 mm, total width: 1,941 mm, type of input current: three-phase, overall weight: 4,000 kg, spindle nose: Kk6, Equipment: documentation/manual, We are offering this used EMCO EMCOTURN 365/65 CNC lathe, manufactured in 1999. Lrodpfx Aaszzrwhozot Model: EMCOTURN 365/65 Supply voltage: 400 V Phases: 3/PE Frequency: 50/60 Hz Maximum current Imax: 59 A Rated current Im: 27 A Short-circuit current Ik: 6 kA Duty cycle S6: 40% Year of manufacture: 1999 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, operating hours: 7,638 h, functionality: fully functional, EMCO E45 CNC lathe Used, fully functional. Includes chip conveyor and Emco Compact Load magazine. Working area Swinging diameter over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar diameter: 45 mm Distance between centers: 687 mm Travel distances Saddle travel X: 160 mm Saddle travel Z: 310 mm Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positional accuracy P₉ according to VDI 3441 in X/Z: 3 / 3 µm Main spindle Spindle connection according to DIN: 55026 KK5 Spindle bearing diameter, front: 80 mm Through-hole with max. diameter: 45 mm Max. chuck size: 160 mm Speed range, continuously adjustable: 0–6,300 rpm Max. torque: 78 Nm C-axis Resolution: 0.001° Spindle indexing for driven tools (disc brake): 0.01° Tool turret Tool holder: VDI 30 Tool positions: 12 Of which driven: 6 Machine data Lrjdpfx Aez A T S Tsazet Total power requirement: 17 kW Footprint (L × W × H): 2.25 × 1.63 × 1.94 m Machine weight: 3.3 t The machine is immediately available and can also be inspected. Upon request, we can also arrange transportation.

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Lrsdpfx Aasnxi H Uozst Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: excellent (used), Year of construction: 2014, operating hours: 367 h, functionality: fully functional, turning length: 2,845 mm, turning diameter: 1,150 mm, total height: 1,890 mm, total length: 6,740 mm, total width: 2,205 mm, workpiece weight (max.): 5,000 kg, overall weight: 9,170 kg, Equipment: documentation/manual, Hankook Protec 9NC 3000 Flat Bed CNC Lathe — 2014 Year: 2014 Machine: Hankook Protec 9NC 3000 Type: Flat Bed CNC Lathe Running Hours: 367 hours Available for sale is a 2014 Hankook Protec 9NC 3000 Flat Bed CNC Lathe, showing just 367 hours. The machine is supplied with all three steady rests, making this a very well-equipped machine and an excellent opportunity for anyone looking for a heavy-duty CNC turning centre with very low hours. Key Features Hankook Protec 9NC 3000 2014 model Only 367 hours ! Flat bed CNC lathe 3 x steady rests included 3 Jaw and 4 Jaw Chucks Heavy-duty construction Lrodpfx Aajzvgayezot Suitable for a wide range of turning applications Low-hour machine Safety platform included Turning diameter over bed: Ø1150 mm Turning diameter over carriage: Ø830 mm Maximum turning length: 2845 mm Spindle bore: Ø105 mm Maximum turning weight: 5000 kg A very clean, low-hour example of a Hankook Protec 9NC 3000, complete with all three steady rests. Contact us for further information, photographs, specifications or to arrange an inspection.

Condition: used, Year of construction: 2020, Star SB-20R Type G CNC Sliding Head Lathe with Fanuc Series Oi-TF CNC Control, 5 Axis Machine, Twin Spindle Collet Chucks, 16 Tool Positions, up to 7 Turning Tool Positions, 4 Sleeve Tool Positions, 5 Driven Tool Positions, (5 Spindle Cross Drilling Unit ER11/16 0M151), 20mm Max Work Piece Diameter, Main Spindle Speed 10,000rpm, Sub Spindle Speed 9000rpm, Fire Trace Automatic Fire Suppressant System, Parts Catcher & Conveyor. S/No. 7009 (0374) (2020), 1750kg with FMB Micromag 20 6 meter Barfeed. Country of Origin: Japan Lsdoz Armxjpfx Aazert Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.