Used 3 Axis for sale (70,005)

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A Isdpfxox Tiq So Addeht *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 43,000 m/min, feed rate Y-axis: 43,000 m/min, feed rate Z-axis: 30,000 m/min, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, X - Travel: 1020mm Y - Travel: 610mm Z - Travel: 600mm Table Length: 1150mm Table Width: 580mm Table load: 900 Feed rate X-Axis: 43000mm/min. Feed rate Y-Axis: 43000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 2830mm Width: 2340mm Height: 2683mm Weight: 3600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ihodpfx Adex Tfuasdjt

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, Full enclosure with vacuum extraction Roller shutter door for crane loading Pick-Up station for 3 angled milling head  Face machining possible to generously sized areas Distance spil to table 140 - 740 mm Pendel screen for splitted manufacturing Coolant tank filtration 350 Liter HR410 Handwheel HeidenHain Double LTA Oil Mist   Flexible, high-precision machining of large and complex parts, with reliable German build quality. X - Travel: 2340mm Isdpfx Adox Sxx Nsdsht Y - Travel: 800mm Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6200mm Width: 3500mm Height: 3600mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, functionality: fully functional, overall weight: 5,900 kg, space requirement height: 3,000 mm, space requirement width: 2,250 mm, space requirement length: 2,600 mm, workpiece weight (max.): 800 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, Equipment: documentation/manual, Röders RFM600/2 - used Working area: X-axis: 600 mm Y-axis: 450 mm Z-axis: 300 mm (height) Machine table: T-slot design Size: 700 mm x 550 mm Workpiece weight: Maximum 800 kg Feed rates: 0 - 30,000 mm/min on all axes. Control system: Röders RMS6 Spindle: HSK-E40, 42,000 rpm incl. HG sensor (high-precision sensor for detecting and compensating spindle thermal elongation) Cooling: Minimum quantity lubrication, air Iodpfx Adexl Sfajdsht Tool changer: 17-position linear changer Accessories: Laser for tool measurement & compensation Automatic 3D probe Tool cleaning Workpiece cleaning Web camera

Condition: new, operating hours: 15 h, YCM NXV1020A, spindle: SK40/12,000 rpm, control: Siemens 828D, tool changer: 30-fold, X:1020mm Y:520mm Z:540mm, coolant system: IKZ20bar, chip conveyor Isdpfjrutazsx Addsht

Condition: good (used), Year of construction: 2004, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 100 mm, Universal Tool Milling Machine V/H Manufacturer: Emco Model: FB-4 Year of manufacture: 2004 Control: Heidenhain ND-760 display Technical specifications: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp • Coolant system • Splash guard enclosure (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: 1,485 x 1,500 x 1,700 mm Accessories: ----- • 4x machine leveling feet • Operating manual • Clamping wrench • Counter bearing for horizontal machining Isdpfxox Tzk Ro Addjht • Shaft set for horizontal machining • Table enclosure (currently removed) Two identical machines available, both serviced and partially overhauled in Q4-2025.

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Ijdpjhp Rc Ijfx Addoht Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: excellent (used), Year of construction: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Low hours – previously used in a school Machine No.: 55 Year of manufacture: 2000 Travel X: 400 mm, Y: 320 mm, Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate X, Y, Z axes: 10 – 1000 mm/min, infinitely variable Rapid traverse X, Y, Z axes: 1800 mm/min Quill stroke: 60 mm Spindle motor drive power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque. Ihodpew D Hmlofx Addet Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Minimum 45 mm Maximum 595 mm Distance vertical spindle to table clamping surface: Minimum 45 mm Maximum 490 mm T-slot width: 14 H 7 mm T-slot spacing: 50 mm Number of T-slots: 5 Equipment: - CNC contouring control Heidenhain TNC 135 - 18 spindle speeds - Fixed angle table - Chip collection tray - Coolant splash guard and chip protection shield - Coolant system - Centralized lubrication - Lighting - Heidenhain control - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Centralized lubrication for guideways and gearbox - Precision ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – Ex-school machine Low hours Location: ex-stock 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 2001, 3-Axis CNC Press Brake with HACO-Robosoft ATS 590 Graphic Control Manufacturer: HACO, Origin Belgium Model: ERMS 40135 Year of manufacture: 2001 / retrofit in 2008 with ATS 590 Technical data: Ihjdex Npiyopfx Addot Press force: 135 t Bending length: 4000 mm Features / Accessories: • 3-axis CNC control HACO ATS 590 Graphic (Y, X, and R axes for stroke depth and back gauge forward/backward + up/down) • Back gauge fingers adjustable together/apart manually • Manual table crowning by handwheel beneath the die with SIKO digital counter; also adjustable in the tool cassettes via wedge Delivery time: 21.01.2026 ex location D-32425 Minden, loaded free on truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2016, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2016 Control : Hurco MAX5 Speed : 12000 rpm Movement X/Y/Z : 1625/864/762 mm Spindle: Technology:Belt-driven spindle Speed:12.000 rpm Power (max.):18 kW Torque (max.):239 Nm Taper:SK40 Workingtable: Clamping surface:1.676 x 889 mm Tableloading (max.):2.722 kg In general: Toolmagazine:40 Stations Rapid travers in X/Y/Z:18/18/13,5 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internaal cooling unit with filter and High-pressure, 20 bar Workpiecemeasurement:Touchprobe, Renishaw OMP 60 Toolmeasurement:Probe, Renishaw TS27R Setup operations:Electronic handwheel Isdpjxpb Swjfx Addjht Furhter Equipment:Chiller, Trafo Further Accessory:Misc. toolholder

Condition: used, _____ Description: Year of manuf. : 2020 Control : Heidenhain TNC640 Speed : 42000 rpm Movement X/Y/Z : 650/550/400 mm Tool holder : HSK-E40 Spindle: Technology:Motorspindle Speed:42.000 rpm Power (max.):13,5 kW Taper:HSK-E40 Ihsdewx T T Uspfx Addet Workingtable: Clampingsurface:530 x 900 mm Tableloading (max.):600 kg In general: Toolmagazine:60 Stations Rapid travers in X/Y/Z:50 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Y/Z Chipmanagement:Chiptray Coolingmanagement:Minimumlubrication Workpiecemeasurement:Touch probe, Renishaw OMP 400 Toolmeasurement:Laser, BLUM Setup operations:Electronic handwheel Further Equipment:Spindlechiller

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: Sinumerik 828D, _____ Description: Year of manuf. : 2023 Control : Siemens Sinumerik 828D Speed : 12000 rpm Movement X/Y/Z : 900/460/520 mm Iedoxr Sh Uopfx Addsht Tool holder : BT40 General: Year of manufacture:2023 Control system:Sinumerik 828D X/Y/Z travel:900/460/520 mm Speed:12,000 rpm Tool holder:BT40 Spindle: Technology:Belt spindle Speed:12,000 rpm Power:18 kW Torque:117 Nm Rapid traverse X/Y/Z:36/36/30 m/min Tool holder:BT40 Tool magazine: Technology:Chain magazine (ATC type) Number of stations:30 Work table: Clamping surface:1050 x 460 mm Table load capacity:600 kg Features/accessories: Chip disposal:Chip conveyor Coolant supply:IKZ system Setup operation:Electronic handwheel Other:Spray gun

Condition: used, Year of construction: 2015, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2015 Control : Hurco MAX5 Speed : 10000 rpm Movement X/Y/Z : 762/508/610 mm Tool holder : SK 40 In General: Year of manufacture:2015 Control system:Hurco MAX5 Travel X/Y/Z:762/508/610 Speed:10,000 rpm Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK 40 Work table: Clamping surface:1,020 x 510 mm Ihsdpfxsxz I A Hs Addet Maximum table load:1,300 kg : Tool magazin: Technology:Drum magazine Tool changer:Double gripper Number of stations:24 Max. tool diameter:81 (120) mm Max. tool length:300 mm Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system NC rotary table:4th axis (A-axis) Tool magazine:30 stations Tool measurement:Renishaw measuring probe

Condition: used, Year of construction: 2021, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2021 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK 40 In General: Year of manufacture:2021 Control system:Heidenhain TNC 640 Traverse paths X/Y/Z:1 mm Speed:10,000 rpm Spindle: Technology:Belt drive Speed:10,000 rpm Tool holder:SK 40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Max. table load:750 kg Ihjdpfx Aoxxny Toddjt Tool magazin: Technology:Drum magazine Tool changer:Double gripper Number of stations:30 Maximum tool length:340 mm Maximum tool diameter:120 mm Equipment: Measuring systems:Directly in X/Y/Z (glass scales) Chip removal:Chip conveyor Coolant supply:Internal coolant system, 20 bar Workpiece measurement:Touch probe Tool measurement:Tool setter Set-up mode:Electronic handwheel Oil separator:Mechanical skimmer Media feed-through Spindle:Coolant + blast air

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopMill, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopMill Speed : 10000 rpm Movement X/Y/Z : 350/250/300 mm Spindle: Technology:Directdrive Speed:10.000 rpm Power (max.):7 kW Torque (max.):41 Nm Taper:SK30 Ihsdpsxthpwsfx Addjt Workingtable: Clampingsurface:520 x 300 mm Tabeloading (max.):100 kg In general: Toolmagazine:20 Stations Rapid travers in X/Y/Z:24 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Y Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump with 8 bar Workpiecemeasurement:Touch probe, Marposs WRP 45 Toolmeasurement:Probe, Marposs TS30 4.-Axis:Walter TANI 100 NEG with 3-Jaw chuck and Tailstock Oilmistseparation:Mechanical extraction, Reven Setup operations:Electronic Handwheel Further Equipment:Rinsing pistol Further Accessory:Misc. used Toolholders

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Acu-rite Mill Power 3 Axis CNC Control Ihsdsx Af I Ajpfx Addst Table Size 1370 x 254mm Travels: X – 1050mm Y – 390mm Z (Quill) – 115mm Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Spindle Speeds High 55 – 4300rpm Weight: 1850Kgs 3 Phase Electrics Manufactured: 2018 Complete with: Vice Interlocking Table Guards Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, rapid traverse Z-axis: 16 m/min, controller model: OKUMA-OSP-HMI, table width: 850 mm, table length: 2,200 mm, table load: 2,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, spindle nose: BT 50, number of spindles: 36, number of slots in tool magazine: 36, tool length: 400 mm, tool diameter: 120 mm, tool weight: 20 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Ihjdpfou Dinkjx Addst

Condition: reconditioned (used), Year of construction: 1997, Model: B1050 Year: 1997 Weight: 5,000kg AXES: 3 (X, Y, Z) CNC: FAGOR 8050M Characteristic: Table dimensions: 1200x500mm Routes (X, Y, Z): 1000x500x510mm Maximum weight on table: 500kg Rapid advance on X-Y axis: 25,000mm/min. Rapid advance on Z axis: 20,000mm/min. Work advance: 5,000mm/min. Ihsdpfxjhy Rdme Addst Head: ISO 40 Speed ​​range: 100-6,000rpm Maximum distance spindle to table: 650mm Automatic tool changer: 18 Selection type: Sequential Maximum tool diameter: 85mm (Between adjacent tools) Maximum tool diameter: 135mm (Between alternate tools) Maximum tool length: 250mm Maximum tool weight: 6kg Tool change time: 6 sec.

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Storage location: Nattheim Ihedpfx Adevvi R Ejdet

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, mount diameter: 40 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,600 mm, table width: 800 mm, table length: 395 mm, For sale is a conventional milling machine from the Hermle brand and the type UWF 801 The machine is fully functional, easy to use and yet efficient, which makes it ideal for the DIY enthusiast but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle mount ISO: SK40 Ihedpfjvtpl Rox Addst Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 steples mm/min Feed: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: used, Year of construction: 2001, functionality: unexamined, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,500 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 510 mm, table length: 760 mm, table load: 1,000 kg, For sale is a 3-axis CNC milling machine from the Hurco brand and the type VMX 24 Technical data: - Year of manufacture: 2001 - Control: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. part weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull bolts, which can be seen in pictures, are not part of the offer Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Isdpfxev Tcfke Addeht Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: good (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, A Kunzmann milling machine of the type WF 4/3 is for sale The machine is fully functional and ready for immediate use Technical data Control: Heidenhain TNC 124 Year of manufacture: 1996 Working range longitudinal X - axis: 400 mm transverse Y - axis: 350 mm vertical Z - axis: 400 mm Angled table, rigid Clamping surface: 650 x 350 mm Max. load: 250 kg Main drive AC motor: 5.5 kW Feed drives AC - single drives Feed infinitely variable 0 - 2 000 mm/min Tool holder: SK 40 Speed range: 1-4000 1/min Quill, vertical: stroke 60 mm Swivel range vertical milling head: ± 90° Tool clamping: hydraulic Linear stroke measuring systems, direct, distance-coded Resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441 0.015 mm 0.015 mm Operating voltage 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg On request, transportation and loading can be arranged at extra cost. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Ihodpfx Aevftrxeddet Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1997, operating hours: 10,227 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, table width: 540 mm, table length: 1,000 mm, overall weight: 4,500 kg, spindle speed (max.): 12,000 rpm, For sale is a machining centre from Deckel Maho, model DMU 60 E. The machine is fully functional and ready for immediate use. Particularly noteworthy are the low program run hours. Iedpfx Adsw I R I Hodeht Technical data: Year of manufacture (estimated): 1997 Control: HEIDENHAIN TNC 426PB Control ON: 8,283 h Machine ON: 31,148 h Program run: 10,227 h Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Max. table load: 350 kg Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed speed: 20 - 10,000 mm/min Rapid traverse X/Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min Tool changer: 25 positions Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Weight: approx. 4,500 kg Transport and loading can be organised throughout Europe at additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2009, operating hours: 625 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, total height: 2,100 mm, total length: 2,000 mm, total width: 1,700 mm, overall weight: 1,600 kg, For sale: 3+2 axis machining center by DMG, model DMU 35 M This machine comes from an educational institute and was primarily used for training in control operation and setup. Note the exceptionally low spindle hours. Technical specifications: Year of manufacture: 2009 Spindle hours: 625 Machine no.: 18065358844 X-axis travel: 350 mm Y-axis travel: 240 mm Z-axis travel: 340 mm Feed rate: Infinitely variable up to 5,000 mm/min Ihodpfx Aox Aiiqeddst Rapid traverse: 5 m/min Servomotors for X, Y & Z axes Clamping area: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool changer: Manual change Tool holder: SK 40 Tool clamping: pneumatic/mechanical Footprint: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be organized Europe-wide upon request and at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options, please visit our website.

Condition: repair required (used), functionality: limited functionality, travel distance X-axis: 500 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, mount diameter: 40 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,600 mm, table width: 800 mm, table length: 395 mm, For sale is a conventional milling machine with active control from Hermle and type UWF 801 A hydraulic hose is defective and has already been removed and replaced. After installation, the machine is fully functional and ready for use (we can do this for you) The machine is easy to use and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm Ihjdpfx Adsvtpm Uedst z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 steples mm/min Feed: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website