Used Heavy Lathe for sale (10,080)

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, Todpfxswhylvs Al Aoc 24”/28” Steady.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 1,280 mm, spindle bore: 105 mm, turning diameter: 11,000 mm, center height: 800 mm, feed length X-axis: 800 mm, feed length Z-axis: 11,000 mm, quill stroke: 200 mm, total length: 16,500 mm, total width: 2,100 mm, total height: 2,200 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 36,000 kg, rapid traverse Y-axis: 4,000 m/min, workpiece weight (max.): 40,000 kg, Heavy Duty Lathe, type TCG 160 x 11m after overhaul: regrinding of the bed and carriage plate, new bearings on the main spindle, new bearings in the tailstock, new control cabinet with new equipment, 100% new wiring, new cable carriers, new paint, geometry according to ISO 1708. The lathe will be ready in January/February 2027. Special equipment: • 1600 mm (63”) dia. faceplate with 4 jaws • 3-point roller steady rest, dia. 100–400 mm • 3-point roller steady rest, dia. 250–600 mm Tedpfx Aoz Hvynel Asc • set of quadrant gears • electronic tailstock thrust indicator

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Main drive 60kW, 40 ton load capacity Todpjx Hp Iwjfx Al Aec Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: like new (used), We are offering this Copeland Z9-6MM-30X-AWM in like-new condition, with the year of manufacture unspecified. We are selling a Copeland semi-hermetic, air-cooled condensing unit, removed from a cold room installation. Specifications: Brand: Copeland Model: Z9-6MM-30X-AWM Frequency: 50 Hz Purchased new in 2021 Professionally dismantled in 2022 Tjdpfxsz D Erbs Al Aec In perfect working order Stored indoors since dismantling The equipment can be viewed and collected in the Besançon area. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Tedpfxjzww R So Al Asc

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center width: 400 mm, turning length: 2,000 mm, feed rate X-axis: 420 m/min, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 3,800 kg, disc diameter: 450 mm, three-jaw chuck diameter: 320 mm, faceplate diameter: 450 mm, MTP CW6180X2000 – Heavy-Duty Universal Lathe 800 × 2000 | Ø105 mm Spindle Bore | 7.5 kW | 3-Axis DRO Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CW6180X2000 is a heavy-duty universal centre lathe designed for professional machining of shafts, cylindrical components, tapers, spherical surfaces and internal or external threads. With an 800 mm swing over bed, 2000 mm turning length and a large Ø105 mm spindle bore, the machine is suitable for demanding workshop and industrial applications. Its rigid 400 mm wide bed, powerful 7.5 kW main motor and extensive threading and feed ranges make it a versatile machine for repair workshops, toolrooms, maintenance departments and general production. ### TECHNICAL DATA - Maximum turning length: 2000 mm - Swing over bed: 800 mm - Swing over cross slide: 570 mm - Swing in gap: 1035 mm - Gap length: 330 mm - Bed width: 400 mm - X-axis travel: 420 mm - Z-axis travel: 230 mm - Tool post swivel range: 70° - Spindle speed: 25–1600 rpm, 16 speeds - Spindle bore: Ø105 mm - Spindle nose / mount: D1-8 - Spindle taper: MT5 - X-axis feed: 0.022–0.74 mm/rev, 25 steps - Z-axis feed: 0.044–1.48 mm/rev, 25 steps - Tailstock quill diameter: Ø90 mm - Tailstock taper: MT5 - Tailstock quill travel: 235 mm - Tailstock adjustment: 11 mm - Metric threads: 0.45–120 mm, 54 ranges - Module threads: 0.25–60 mm, 46 ranges - Whitworth threads: 7/16–80 TPI, 54 ranges - Diametral Pitch threads: 0.88–160 DP, 42 ranges - Main motor power: 7.5 kW - Power supply: 400 V - Dimensions (L × W × H): 3740 × 1140 × 1910 mm - Weight: approx. 3800 kg ### STANDARD EQUIPMENT - 3-axis digital readout (DRO) - 3-jaw chuck Ø320 mm - 4-jaw chuck Ø400 mm - Faceplate Ø450 mm - Driving plate - Fixed steady rest, max. Ø250 mm - Travelling steady rest - Chuck guard - Splash guard - Coolant system - Reduction sleeves - Dead centre - Tool set ### APPLICATIONS Suitable for machining: - shafts and large cylindrical components, - tapers and stepped parts, - internal and external threads, - repair and maintenance components, - general industrial production work. ### SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, tooling and machining parameters. Professional transport can be organised throughout Poland and the whole of Europe. Warranty and post-warranty service are available. Tjdpfx Aljyzz Sqe Asc Please contact us for current availability, delivery costs, additional photographs, technical information or a personalised commercial quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, feed length X-axis: 420 mm, quill travel distance: 235 mm, total length: 4,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 4,300 kg, disc diameter: 450 mm, faceplate diameter: 450 mm, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH Transport can be arranged directly to the customer anywhere in Europe. Transport cost is quoted individually according to the delivery postcode and destination. ## MTP CQ6280 HEAVY-DUTY UNIVERSAL LATHE 800 × 3000 | Ø105 mm SPINDLE BORE | 7.5 kW | 3-AXIS DRO Metal Technics Polska – Professional Metalworking Machinery The MTP CQ6280 800 × 3000 is a heavy-duty universal lathe designed for demanding professional and industrial machining applications. Its rigid construction, large working capacity and Ø105 mm spindle bore make it suitable for machining large shafts, cylindrical components, tapers, stepped parts and internal or external threads. With an 800 mm swing over bed, 3000 mm turning length, 400 mm wide bed and a machine weight of approximately 4300 kg, the CQ6280 provides the stability required for heavy workshop and production use. The machine is equipped with a 7.5 kW main motor and 3-axis Digital Readout (DRO) for accurate and convenient machining. ### TECHNICAL DATA - Maximum turning length: 3000 mm - Swing over bed: 800 mm - Swing over cross slide: 570 mm - Swing in gap: 1035 mm - Gap length: 330 mm - Bed width: 400 mm - X-axis travel: 420 mm - Z-axis travel: 230 mm - Tool post swivel range: 70° - Spindle speed: 25–1600 rpm, 16 speeds - Spindle bore: Ø105 mm - Spindle nose / mounting: D1-8 - Spindle taper: MT5 - X-axis feed: 0.022–0.74 mm/rev - Z-axis feed: 0.044–1.48 mm/rev - Tailstock quill diameter: Ø90 mm - Tailstock quill travel: 235 mm - Tailstock taper: MT5 - Tailstock cross adjustment: 11 mm - Metric threads: 0.45–120 mm - Module threads: 0.25–60 mm - Diametral Pitch threads: 0.88–160 DP - Whitworth threads: 7/16–80 TPI - Main motor power: 7.5 kW - Power supply: 400 V - Dimensions: 4740 × 1140 × 1910 mm - Weight: approx. 4300 kg ### STANDARD EQUIPMENT - 3-axis Digital Readout (DRO) - 3-jaw chuck Ø320 mm - 4-jaw chuck Ø400 mm - Faceplate Ø450 mm - Drive plate - Fixed steady rest up to Ø250 mm - Travelling steady rest - Coolant system - Chuck guard - Fixed splash guard - Reduction sleeves - Dead centre - Tool set ### APPLICATIONS Suitable for: - large shafts and cylindrical components, - tapers and stepped workpieces, - internal and external threading, - repair and maintenance work, - heavy workshop machining, - general industrial production. ### SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase, as well as warranty and post-warranty support. Tsdoyz Ubxepfx Al Aoc Professional transport can be organised throughout Poland and the whole of Europe directly to the customer’s destination. Please provide your delivery postcode and city for an individual transport quotation.

Condition: used, Year of construction: 1958, turning diameter over bed 3050 mm turning diameter over slide rest 2500 mm turning length 21200 mm Control Siemens type 840D turning speeds 0,236-60 U/min faceplate 3000 mm main drive motor 200 kW tailstock quill diameter 900 mm steady 1200 mm steady 1200 mm Tsdpfxsyqtprs Al Ajc steady 750 mm steady 750 mm with live steady 2000 mm faceplate 2000 mm Thickness 330 mm workpiece weight 200 t vier Bahnenbett Mitlaufendes Stützlager durchmesser 680 Bohrstangenlagerung Rollenbock Rollenbock mit Adapter Bohrstand 450 x 10300 mm Bohrstand 650 x 11100 mm Innenschleifmaschine Faros Adapt for Bohrstangenaufnahme The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1969, functionality: unexamined, For sale is a robust, heavy-duty lathe from Yamazaki / Mazak, model Rex 610 × 1500 (centre distance 1500 mm, swing over bed 610 mm). Ideal for machining large and long workpieces. The machine is in condition commensurate with its age. It has not been tested and is sold as is. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialised in both Mazak machines and other brands. We place great emphasis on personalised support and are happy to assist you at any time even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG Tjdpfx Asxyv Alel Asc All details without guarantee.

Condition: used, Lang Centre Lathe, Approx 7.6m Between Centres x 800mm Swing Over Bed, 400mm Swing Over Saddle, Fitted with 4 Jaw Chuck (750mm Diameter) , 2 Fixed Steadies Todpfx Ajzvrn Nol Ajc

Condition: used, Year of construction: 2016, functionality: fully functional, Conventional guide and lead screw lathe for heavy-duty machining of large workpieces. With a 1000 mm turning diameter over the bed and a 4000 mm distance between centers, the Kraft BV-40160 covers the entire spectrum from long shafts to heavy flanges. DRIVE & SPINDLE - Main motor 22 kW with frequency inverter, stepless speed control 6–800 rpm in 4 gear stages - Spindle bore 180 mm, spindle nose A2-15 - Turning diameter in the cross slide 1280 mm for single parts CAPACITIES - Turning diameter over bed: 1000 mm - Turning diameter over cross slide: 710 mm - Distance between centers: 4000 mm - Center height: 500 mm - Bed width: 560 mm (3 V + 1 flat) TAILSTOCK - Quill diameter 125 mm, stroke 250 mm, taper MK6 THREADS & FEEDS - Lead screw diameter 60 mm - Metric threads 0.8–14 mm, inch 2–28, module 0.4–7, DP 4–56 - Longitudinal feed 0.05–0.84 mm/rev - 4-position tool holder, tool shank cross-section 40 mm TECHNICAL DATA - Year of manufacture 2016 - Net/gross weight 9000 / 9700 kg - Dimensions (L×W×H) 5845 × 1950 × 1925 mm - Connection 400 V, 50 Hz, 3 phases CONDITION Used, operated for less than one shift. Located near Nuremberg, available for inspection while powered on. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - Faceplate (spindle nose A2-15) - Steady rest / follower rest - 4-position tool holder Tsdpfx Alezpfgfj Aoc - 2-axis digital readout (DRO) - Tailstock with center Price on request. We will be happy to advise you – competent consulting and nationwide service.

Condition: used, Punching machine brand: CCCP ROMENS Tjdpfxjykmfyo Al Aec weight: approx. 5,200 kg table diameter: 630 mm stroke: 320 mm

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 center distance 3000mm Todpfeu T Dryex Al Asc Circulation over bed 1010 Circulation over facing slide 650 Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z feed force max 16000N Control Heidenhain Manual Turn with faceplate and steady rest The offer is aimed exclusively at traders within the meaning of §14 BGB

Condition: used, Year of construction: 1973, turning diameter over bed 2997 mm turning diameter over slide rest 2235 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tjdpfot Ei Huex Al Ajc Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: used, Technical details: turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm Todpfx Aju Ix Rpsl Aec spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW Tjdpfey S Duvex Al Aec The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg STANDARD EQUIPMENT Tsdpfx Alszi Dhbe Asc - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Tedpfxezfguis Al Aoc Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Condition: not inspected (used), Year of construction: 1999, Dia 800mm Length 2000mm Bore 117mm Steady rest Todpfxozkulme Al Aoc

Condition: used, Year of construction: 1988, turning diameter over bed 2200 mm turning diameter over slide rest 1650 mm turning length 6000 mm 0 75 kW spindle turning speed range 2,8-600 U/min spindle bore 102 mm Height of centres 1100 mm accessories: Planscheibe, Futter accessories: Lynetten weight of the machine ca. 45 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Todpfeyqv Tmox Al Ajc About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1972, turning diameter over bed 920 mm turning diameter over slide rest 720 mm turning length 4000 mm turning speeds 1,4-280 U/min digital readout Acurite steady 640 steady 500 faceplate 900 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Tjdpfxsyt Rx Ao Al Ajc We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1987, turning diameter over bed 1100 mm turning diameter over slide rest 780 mm turning length 4100 mm Control Siemens type 840 D bed width 710 mm faceplate 1000 mm turning speeds 1110 U/min total power requirement 4,79-69 kW Tedpfxsyqvvbs Al Aec weight of the machine ca. 14 t Machine has been overhauled No.: The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter over bed max.: 4000 mm turning diameter over slide rest . mm Todpoyqt Hkofx Al Ajc turning length 7500 mm speed 0-750 u/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1971, turning diameter over bed 1250 mm turning diameter over slide rest 900 mm turning length 5000 mm faceplate 1250 mm workpiece weight in steadies max. 20000 kg workpiece weight 16000 kg Todpfx Asy D A Edol Asc weight of the machine ca. 22 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors. Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Max. torque: 6,000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Holder Turning tool cross-section: 40 × 40 mm Tsdpfx Ajzdd E Rsl Aoc Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. current consumption: 200 A Workpiece Weights (Manufacturer specifications for standard configuration) Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Flying in faceplate: 1,800 kg Chip Conveyor 2 x AME Chip Conveyors Manufacturer: AME GmbH, Emsdetten Type: S8 300 Tlg. 63 Year of manufacture: 05/2016 Not Included: Tailstock Steady rests Note The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Serial number: 990101 Tip width: 3000 - mm Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No