Used 3d printer for sale (4,116)

Keyence Agilista 3D-Drucker 3110W inkl. Spülbehälter

€7,490

EXW Fixed price plus VAT

Call

Condition: good (used), In this offer you acquire a used Keyence Agilista 3110W 3D printer. Item for sale: 1x Keyence Agilista 3110W with the following equipment: incl. rinsing tank Meter readings: Dbe7pci9bz Operating time: Approx. 36,231 hours Printing time: Approx. 492 hours Condition: This offer concerns a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function A test printout can be seen in the photo. For more information you can of course contact us personally. Shipping is possible on request!

more

Listing

Borken

785 km

SLA 3D Printer

3d Systems SLA 5000

€13,000

Call

Condition: good (used), 3D systems Here we offer you a 3D printer. Installation space X Y Z: 508 x 508 x 584 mm Printing technology: SLA stereolithography Layer thickness: 0.075-0.1 mm, depending on the material used 0.075-0.1 mm, depending on the material used Weight: 1318 kg Dimensions: 1880 x 1190 x 2020 mm Laser runtime: approx. 3646 hours Filled with Accura Xtreme - large drum Software 3D Lightyear 1.3 on preparation computer (computer bound) Software BuildStation 5.3 on the system Documents together with software available Mains connection: 220 V, 16 A Ambient temperature: 17-27 °C Cb8eyds Network connection required Type: SLA 5000 Pickup ex location! Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

more

Listing

Hornberg

1,131 km

3D Systems ProJet 3600Max

Call

Condition: like new (used), Very cheap for sale Pwn7wq Incl. two software licenses (Online activation) Incl. 2 build platforms Machine hours: 19831 Hrs Build Hours: 911 Hrs Lamp Hours: 207 Hrs

more

Listing

Groß-Gerau

1,006 km

3D Systems ProJet 3600 Max

Call

total length: 120 cm, total height: 151 cm, total width: 75 cm, overall weight: 299 kg, input voltage: 230 V, Condition: reconditioned (used), Used 3D printing system ProJet 3600 Max from authorized dealer. System visually and technically in good condition, signs of use may be present. Returned device from customer, first hand. The offer includes delivery within Germany (excluding islands), installation with subsequent user training on 2 working days, basic equipment consumables and 6 months warranty. The system was operated in Germany and was supported by a maintenance contract. If the customer is interested, the package can also be customized, e.g. without delivery and installation, without consumables or without warranty. Rental or installment plan is possible. This offer includes the necessary operating software, but no CAD program. Not included is a heating cabinet which is required for post-processing the components. S7mtakt

more

Listing

Wassenaar

629 km

fast SLA printer

Nexa 3D NXE400

Call

Condition: as good as new (ex-display), Year of construction: 2020, Ex-display Nexa NXE400 3D printer, manufactured December 2020. Was used for only 3 or 4 jobs. Currently in storage in its original crate. We also have a the Nexa xCure you can get for free with the machine. The xCure has some transport damage. Ci73thbh More information upon request

more

Listing

Obrtniška ulica 12, 2360 Radlje ob Dravi, Slowenien

1,623 km

3D Systems MJP 2500 +

€29,955

Call

Condition: as good as new (ex-display), Year of construction: 2022, Operating hours: 10 h, machine/vehicle number: 002000246, For sale 3D printer MJP 2500 Plus from 3D Systems. The printer is a display item and has not been used for more than 8 hours. It works perfectly. Bgzx9juttv0 It is sold as a set with the Easy Clean System and the ProJet Finisher. Available immediately.

more

Listing

Deutschland

1,034 km

3D SYSTEMS SLA iPro 8000

Call

Condition: ready for operation (used), Year of construction: 2010, Length: 2200mm, width: 1260mm, height: 2280mm, weight: 1.59t, operational hours counter: 66,511h. B7e3n0he2j

more

Listing

Borken

785 km

SLA printer

3D systems iPro 8000

€40,000

Call

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-State Nd: YVO4with triple frequency Wavelength: 354.7nm Rated power at laser head :1450 mW (1000mW at resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating Adjustment: Self-leveling and self-correcting Production Layer: Minimum 0.05mm Maximum 0.15mm ProScan™Scanner Edge Detection (Diameter at 1/e2): Nominal in standard mode 0.13mm Large line detection Nominell: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Large line detection: 25m/sec. Installation space capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum parts weight : 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single phase, 30A Environmental conditions Temperature range: 20-26°C Max. allowed variation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Ciacizrf Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used / used Scope of delivery: (see pictures) (Sale ex location!) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

more

Listing

Hornberg

1,131 km

3D Systems ProJet 2500Plus

Call

Condition: good (used), Commissioning date: 01/2017 incl. software (online activitation) incl. building platform offer on request immediately available Cad2njde

more

Listing

Groß-Gerau

1,006 km

3D Systems ProJet 660 Pro

Call

total length: 188 cm, total height: 145 cm, total width: 74 cm, input voltage: 230 V, Condition: refurbished (used), Used 3D printing system ProJet 660 Pro (full color system) with integrated cleaning station from authorized dealer. System visually and technically in good condition, signs of use may be present. It is a device from our demonstration center. First hand, offered incl. delivery within Germany (excluding islands), installation with subsequent user training on 2 working days, basic equipment consumables and up to 12 months warranty. Installation space 381 x 254 x 203mm (X, Y, Z), layer thickness 0.1mm. If interested, the package can also be customized according to customer requirements, e.g. without delivery and installation (self-collection/self-installation), without consumables or without warranty. System available immediately. Rental or installment plan is possible. This offer includes the necessary operating software, but no CAD program. Bwmpqyur0k

more

Listing

Berlin

(dealership location)

1,143 km

3D-SYSTEMS SLA 3500

Call

Condition: ready for operation (used), Year of construction: 1997, Documentation available. Bod90vqv9x

more

Listing

Borken

785 km

3D Printer FDM

3D-Systems ProJet 660 Pro

€9,500

Call

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, Bzxs2pqg9m design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

more

Listing

Groß-Gerau

1,006 km

3D Systems ProJet 2500 Plus

Call

total length: 112 cm, total height: 105 cm, total width: 73 cm, overall weight: 211 kg, input voltage: 230 V, Condition: reconditioned (used), Used 3D printing system ProJet 2500 Plus incl. cleaning station EasyClean from authorized dealer. System visually and technically in good condition, signs of use may be present. Returned device from customer, first hand. The offer includes delivery within Germany (excluding islands), installation with subsequent user training on 2 working days, basic equipment consumables and 12 months warranty. Installation space 295 x 211 x 142mm (X, Y, Z), layer thickness 0.032mm. The system was operated in Germany and was supported by a maintenance contract. If interested, the package can also be customized according to customer requirements, e.g. without delivery and installation, without consumables and without warranty. Rental or installment plan is possible. This offer includes the necessary operating software, but no CAD program. Bguwubsezrk

more

Listing

Netherlands

678 km

EOS Formiga P 110

Call

Condition: ready for operation (used), Year of construction: 2016, General Data Machine weight 610 kg This EOS Formiga P 110 3D Printer was manufactured in the year 2016 in Germany. The machine has a nominal power of 5W. Application Types Ba3oh3yj 3DPrinting

more

Auction

Coventry

354 km

3d printer

Arcam Q20 plus EBM

3 days left

Details

Condition: used, Year of construction: 2015, Arcam Q20 plus EBM Metal 3D Printer. Serial No. 1206 (2015) with Arcam PRS Powder Recovery System. Serial No. 150709 (2015), FG Seivmaster, Loading Hoist, Metal Power Container & Portable Trolley Dmmoox Please Note: This lot is located in Coventry, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

more

Listing

William Burford House, Lansdown Pl Ln, Cheltenham GL50 2LB, UK

398 km

Connex 3d Printer

Stratasys Object 260 Connex

€4,350

EXW Fixed price plus VAT

Call

total length: 70 cm, total height: 120 cm, total width: 130 cm, Condition: like new (used), Year of construction: 2018, Operating hours: 2,190 h, machine/vehicle number: 29.2.0.24444, Description Stratasys Objet 260 Connex (Connex260) 3D Printer. • UK – 3 Pin plug Bg3elf7nfr2 • 220V mains supply • Last Stratasys service dated 27.07.2023 • Total print time of 2190 hours In very good condition, undergoes monthly maintenance checks, alongside yearly Stratasys-registered service engineers. Latest Stratasys maintenance log available. Supplied with print and support material (estimated cost of materials alone £3,000). Supplied with Build material • Vero clear – 25% of build tank • RGD450 – 25% of build tank • Aglius black – 100% of build tank • SUP706 – 50% of support tank • SUP706 – 100% of support tank Spare parts • Calibration weighing scales • Calibration kit – Paper and trays • Roller wiper blades x 4 • Maintenance Allen key set Please note: Printer requires an external windows PC to program and run the connex. This is note provided. Software can be sourced from Stratasys Please enquire for international freight or UK delivery costs. I am UK VAT registered, I will supply you with a VAT invoice as per regulations. Buyers can test the system in person from my premises in Cheltenham, UK. All above information on maintenance, material quantity and spares parts is accurate as of 08.11.2023. Any questions, please ask! The machine is sold as seen. I will not accept returns or price reduction after purchase. Seller DUKU

more

Listing

Wassenaar

629 km

Markforged Metal X (complete setup)

Call

Condition: as good as new (ex-display), Year of construction: 2019, Printer was bought in 2018. We requested printed samples from both Markforged and desktop metal studio. The parts from the Markforged system were a lot better both visually and technically so we decided to go with this system. It has been barely used so we decided to sell it. Prior to shipping, the system will receive a full check-up by a certified markforged reseller. If any repairs seem necessary, they will be executed at our expense. Included in the sale: - Markforged metal X printer - wash 1 - sinter 1 - installation within Europe Warranty can be extended through Markforged by the buyer. Accessible end-to-end metal 3D printing solution for functional metal parts It requires no dedicated operator, no powder management system, and minimal PPE. Full system able to print H13 / A2 / D2 / copper / stainless steel 17-4 PH parts. Cur8saxxnw This is a full system including the printer, wash station, and the sinter (300 x 80 x 80 mm volume).

more

Listing

Borken

785 km

DynamicalTools DT60

€33,000

Call

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Printing volume 600 x 450 x 450 mm Outer dimensions 1265 x 780 x 1725 mm Precision in Z axis: 1,25 mikron Precision in X and Y axis: 7,5 mikron Max. Extruder temperature 500 ºC Max. Max. build room temperature 120 ºC Nozzle diameter 0.6 mm Other available Nozzle diameter 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Titanium thermal barrier Two independent extruders Heated filament feed 4 Print Modes : SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum consumption 3 kW/h 7" LCD touch screen Remote monitoring Industry 4.0 capable: WiFi , Ethernet, HotSpot, USB MMS System - Modular Maintenance System Double filament loading Automatic filament change Heated feeder Jam Detection Filament end detection sensor Pressure recovery system Liquid cooling Double tempered glass Base fixed by vacuum High printing speed Dkxn3n Positioning controlled by encoder Type: DT60 Condition: used / used Scope of delivery: (See pictures) (Sale ex location!) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

more

Listing

Nordrhein-Westfalen, Deutschland

856 km

BigRep One G3

Call

worktable width: 1,050 mm, worktable length: 1,050 mm, feed length X-axis: 1,050 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 1,050 mm, Condition: used, Year of construction: 2017, Industrial 3D printers, second-hand P0eiwcwgs Product : BigRep Type : One G3 Year of manufacture : 6/2017 Working area : 1.005 x 1.005 x 1.005 mm Two print heads

more

Listing

Netherlands

678 km

FDM / Industrial Composite 3D Printer

Matsuura Lumex Avance-25

Call

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand Fanuc Model 31i Model B Main Drive Spindle speed range 450-45000 Spindle bore 25 mm Number of axis 3 Movement X-Axis Movement 260 mm Y-Axis Movement 260 mm Z-Axis Movement 100 mm Tools Slots in storage 20 Max weight 0,5 kg Dl982h Max tool diameter 10 mm This Matsuura Lumex Avance-25 3D Printer was manufactured in the year 2018 in Japan. It is equipped with a Fanuc 31i Model B control unit and has 3 axis. The machine has a spindle speed of 450-45000 rpm. Application Types 3DPrinting

more

Listing

Jon Lilletuns vei 9j, 4879 Grimstad, Norway

800 km

Markforged X7

€25,000

EXW ONO VAT not applicable

Call

Condition: like new (used), Year of construction: 2017, Markforged X7 Composite 3D Printer excellent condition. 2863 hours print time. We can offer remote inspection of the system through Teams or similar, can be performed to see that everything is in working order. We will also perform a test print if needed. Key Data: Technology: FDM / Continuous Fiber Reinforcement (CFR) Build size: 330x270x200mm (LxWxH) Layer hight 50-200 micro meter Materials: Onyx(Onyx ESD), Nylon, S-TPU, P-PLA Reinforcement: Kevlar, Carbon, Fibreglass, HSHT Fibreglass Machine Size: 584x483x914 (LxWxH) (desktop size) Weight: 48 kg Operating SW: Eiger Cloud Price is negotiable. F2dvmg3hqd Please send a message or email, before calling from abroad.

more

Listing

Königswinter

884 km

Filamentextrusion for 3D printer

PMH EX30

Call

Condition: new, Year of construction: 2022, extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) with puller with filament accumulator (option) with winder and traverse guide MADE in GERMANY Veif8awin

more

Listing

Wassenaar

629 km

SLS 3d printer

EOS EOSINT P395

Call

Condition: refurbished (used), Year of construction: 2010, Operating hours: 9,500 h, EOS P395 printer. The machine has been completely checked by EOS before disconnecting. Comes with watercooler and 2 build frames. Gpsvpmld7 More information upon request

more

Listing

Borken

785 km

ProJet 3000 HD

€2,500

Call

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer you an untested ProJet 3D Printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional testing, communication models, rapid manufacturing, rapid tooling and more. With features such as a wide material selection, multiple resolution modes and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Print Modes HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD Mode 298 x 185 x 203 mm UHD Mode 127 x 178 x 152 mm XHD Mode n/a Resolution: HD mode 375 x 375 x 790 DPI (xyz); 32μ layer thickness. UHD mode 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode n/a Accuracy (typical) 0.1 - 0.2 % of part dimension Accuracy depends on build parameters, part geometry, part placement Tbk8eb3 and post-processor settings Email Notification: No Build Materials: VisiJet® EX200 build material Solid material with high durability. VisiJet® SR200 Construction Material Inexpensive multi-purpose material. Available in natural, blue or grey. VisiJet® HR200 construction material Available in blue, specially developed for investment casting applications. Backing material: VisiJet® S100 support material: non-toxic wax material for melting supports without hand application. Power supply: 100-127 VAC, 50/60 Hz, single phase, 15A Dimensions (LxWxH) printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging

more

Listing

Nordrhein-Westfalen, Deutschland

856 km

3D printer 3D printer

BigRep Studio G2

Call

worktable width: 1,000 mm, worktable length: 500 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 500 mm, feed length Z-axis: 1,000 mm, Condition: used, Year of construction: 2020, Industrial 3D printers, second-hand K3wnfzrq Product : BigRep Type : Studio G2 Year of manufacture : 11 / 2020 Working area : 1.000 x 500 x 500 mm

more

Listing

België

758 km

Stratasys Objet24

Call

Condition: ready for operation (used), Year of construction: 2015, Operating hours: 872 h, Control Unit Brand Stratasys Media Main electronic connection 200-240V/50-60 Hz Power consumption 3.5 kVa Dmased This Stratasys Objet24 3D Printer was manufactured in the year 2015 in Israel and has 872 printing hours. It is equipped with a Stratasys control unit. Application Types 3DPrinting

more

Listing

Jon Lilletuns vei 9j, 4879 Grimstad, Norway

800 km

3d printer

Markforged Metal X

€55,000

EXW ONO plus VAT

Call

overall weight: 600 kg, input voltage: 400 V, Condition: like new (used), Year of construction: 2019, Printer was installed in our lab in 2020, and has since then run only 6 sinter runs, i.e. rarely used. Due to strategic changes we are now selling the machine. For more details about the machine and its capabilities, please visit Markforged’s webpages. The system consists of the following machines: - Markforged Metal X printer - Markforged Wash-1 - Markforged Sinter-2 Notes: - We recommend involving the certified Markforged supplier for proper de-installation and installation of the machine. An additional 7 000 EUR should therefore be included in the estimate (excl transport as it depends on location). Fzf9mx8 - Inside the Sinter-2 there is an insulating element that may crack when handled after sintering has been performed. According to the supplier it should be possible to avoid the crack, but if it happens the cost of repair will be 13 000 to 17 000 EUR. To ensure proper handling on both sides, we recommend splitting the repair cost 50-50 if the repair were to be necessary.

more

Listing

PRICE DROPx2!! Stratasys Objet260 Connex (Connex260)

Mart Rd, Minehead TA24 5AF, UK

465 km

PRICE DROPx2!! Stratasys Objet260 Connex (Connex260)

€1,250

3D Printer Multi-Material

Call

Condition: repair required (used), Year of construction: 2014, For sale is a Stratasys Objet 260 Connex (Connex260) 3D Printer. It was built in 2014, taken out of service toward the end of 2022. As per the service manual (included) It was regularly serviced by Stratasys-registered service engineers, with the last service dated March 2022. I commissioned a visit and report from a Stratasys Service Engineer on it's functionality The machine was powered up, tested for print head XYZ movement, OS, software and material licenses. As we did not have any materials we could not check for printing. He reported as follows: "The system powers ON > boots up the O/S > GUI opens > and can home XYZ if block is back left corner. The Y encoder has become caught on the encoder reader wedged on top of encoder reader/sensor and has more than likely damaged the Y encoder strip. As witnessed you had seen the Y motor functions and the Y home/HW limit sensors function/actuate. Appears the encoder surface is damaged or the reader – both are now aligned with equal space - Y axis does not seem to register front to back movement in , and X and Z are operational/functional" Hence his assessment is that the encoder strip needs to be replaced. He also mentioned the X axis belt is a bit sloppy - needs to be tightened rather that replaced (we ran out of time for him to do so but it's a quick fix) It was noted there are some modifications that are not listed on the service record including motors upgraded, filter bypassed. The machine is in ok internal and external condition - some build-up by the purge tank, etc. - but all as befits a machine of this age. There are 2 bags of Support material in the system, one full, the other half-full, which will be included in the sale. It is unsure if the machine was flushed when it was last used. The machine comes from a dental lab, but we were unsure if it is for dental use only. The license allows the following materials: (as per photograph) Durus White RGD 515 RGD 535 Bb0f7gud Tango + Tango Black Tango Black + The Maintenance Counter shows total print time of 2322 hours and condition of all other parts are within "warning time" readings, however these readings are dated September 2018 so it's possible there was an upgrade of some kind between 2014 and 2018 I haven’t used this printer, or seen it working-hence listing as "repair required" The machine is currently set to UK 220V single-phase mains voltage. Please enquire for international freight or UK delivery costs. I am UK VAT registered, I will supply you with a VAT invoice as per regulations. Buyers can test the system in person from my premises in Somerset, UK. Any questions, please ask! The machine is sold as seen. I will not accept returns or price reduction after purchase.

more

Listing

Hornberg

1,131 km

3D Printer PartPro150 xP

XYZ Printing PartPro150 xP

Call

Condition: new, Year of construction: 2022, With a footprint of 150 x 150 x 200 mm and an X/Y resolution Cjawvvgu0f of 130 microns, the PartPro150 xP is an SL printer that is ideally suited for manufacturing parts that require a smooth surface. Offer upon request

more

Listing

Borken

785 km

Objet / Stratasys Connex500 50147

€14,500

Call

Condition: excellent (used), Here we offer you an Objet Stratasys 3D printer. The Objet Connex 500 is the pioneering multi-material 3D printer from Objet. With a large footprint of 500 x 400 x 200 mm, designers and engineers can quickly prototype, to more closely simulate the intended end product than any other technology. What is unique about the Objet Connex? With Objet's patented simultaneous multi-material molding technology, the Objet Connex 500 can produce print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™. It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics. Outstanding productivity B7hmpjt8 The Objet Connex 500 offers: - Multi-material models - no more designing, printing and gluing together separate model elements. - Different parts. Different materials. Same tray - saves time and serves multiple needs at the same time. - Excellent 16 micron high resolution printing accuracy - 600 DPI X & Y resolution - Thin walls

more

Listing

Wassenaar

629 km

FDM / FFF 3D printer

Stratasys F170

€10,900

ONO plus VAT

Call

Condition: new, Year of construction: 2021, Stratasys F170 3D printer. Printer was built in 2021 and was used for only for a single test print of 10-20 hours! The printer is currently stored in its original packaging, with shipping protection per Stratasys recommendations. Cxboofzgbr The professional printers from Stratasys are known for their reliability. This printer is also very office friendly. Amazing opportunity to buy a very good 3D printer.

more

Listing

Germany

1,034 km

Stratasys Objet500 Connex3

Call

Condition: ready for operation (used), Year of construction: 2018, General Data Becx0gbsh9e Measurements width 490 mm Measurements depth 390 mm Measurements height 200 mm Additional Equipment various spare and wear parts in stock the high pressure cleaning system is included This Stratasys Objet500 Connex3 3D Printer was made in the year 2018 in Israel. Three materials can be printed at the same time, i.e. colored models are possible, hard/soft material combinations are possible, and transparent components can be printed. The high pressure cleaning system is included. Application Types 3DPrinting

more

Listing

PRICE DROPx2!! Stratasys Objet 500 - FREE UK DELIVERY

Mart Rd, Minehead TA24 5AF, UK

465 km

PRICE DROPx2!! Stratasys Objet 500 - FREE UK DELIVERY

€6,000

Call

Condition: good (used), Year of construction: 2019, For sale is a Stratasys Objet 500 Dental 3D Printer It was bought as new in 2019 by a London-based dental facility where it was regularly serviced and had clocked 12,735 hours of printing time before it was taken out of service and put into storage in February 2023. It was recently serviced by a certified Stratasys engineer who ran a hardware and software test, and reported the following: The computer has a 64-bit Intel processor running Windows 7 Pro software which prints in conjunction with GrabCAD software. The XYZ motors all function correctly. The purge unit is in good condition. The machine is in good physical condition. There are some scratches and chemical spillage to the outside bodywork and some wear inside, particularly the build tray - as befits a machine of it’s age. the Shock indicator on the unit shows no major impact. Screenshots of firmware, build hours, material packages and Windows O/S are all included in the photographs. The Customer Maintenance page comments that there are some standard user maintenance tasks that need to be completed. The licensed materials are: Vero Magenta Vero White Vero Yellow TangoBlack+ Tango+ MED 610 MED 620 MED 670 MED 690 MEDFLX625 Agilus30Black Ivgpr7xio Agilus30Clear VeroPureWhite FullCure705 SUP706 M.Cleaner S.Cleaner The print heads could not be tested as no material could be run through the system; the previous owners advised the machine was chemically flushed to preserve the internal parts before storage. The engineer could not validate this 100% as the canisters had been retained by the previous owners, however the User Wizards showed the Material Replacement Wizard had been run around the date expected. The system will be supplied with computer screen, keyboard, mouse and Service Book. The weigh scales and their power cables are missing, but we do have the HOW containers and data cables for the scales. The missing items can be purchased from a certified distributor if required. The machine is currently set to UK 220V single-phase mains voltage. Please enquire for international freight delivery costs. I am UK VAT registered. VAT will be added to the price if applicable. I will supply you with a VAT invoice as per regulations. Buyers can test the system from my premises in Somerset, UK. Any questions, please feel free to ask. The machine is sold as seen. Buyer must be fully understanding of the machine’s condition, usage and capabilities before purchase. I will not accept returns or price reduction after purchase. For more information including dimensions, weight, recommended usage, etc. please ask me, or search “Stratasys Objet 500 Dental” online. FREE DELIVERY IN THE UK

more

Listing

Hornberg

1,131 km

3D Printer PartPro300 xT

XYZ Printing PartPro300 xT

Call

Condition: new, Year of construction: 2022, The PartPro 300 xT is a professional FFF 3D printer for functional prototyping. With a build volume of 195 x 270 x 300 mm with dual extrusion and 295 x 300 x 300 mm with single extrusion, it also features a respectable build space. Im09jd8c Offer on demand

more

Listing

Borken

785 km

MJF Jet Fusion 3D Printer

Stratasys Dimensio elite

Call

Condition: excellent (used), Stratasys 3D printer Dimensio elite Here we offer you a Stratasys 3D printer Dimensio elite. Stratasys 3D printer Dimensio elite The Dimension Elite 3D printer is part of the Design Series from Stratasys. The Dimension Elite printer is ideal for printing 3D prototypes, and modeling functional components, such as medical devices, mobile electronic equipment or precision instruments. With a simple click on "Print", the CAD file is prepared and the printing process is started. After simply removing the soluble support material, a precise and detailed component is revealed. Manufacturer: Stratasys Type: Professional Material(s): ABS Technology: Melt layering Assembly: Plug&Play Size: 686x914x1041 Weight (kg): 136 Nozzle opening (mm): - Coating thickness (µm): 178 Speed (mm/s): - Precision (µm): - Filament thickness (mm) : - Maximum build volume (mm): 203x203x305 File format: .stl Ctv9rmr20q Software: CatalystEX Software Connections: Ethernet Operating system: Windows XP, Windows 7 Required power: 100 to 120 VAC, 60 Hz, at least 15 A in a dedicated circuit or 220 to 240 VAC, 50/60 Hz, at least 7 A in a dedicated circuit Type: Dimensio elite Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

more

Listing

Ede

704 km

HP Hewlett Packard 4200

Call

Condition: refurbished (used), Year of construction: 2017, HP 4200 MultiJet Fusion 3D printer with up tp 3 Build Units and up to 2 Processing Stations with fast cooling. The machine was installed in 2017. The Printer is currently not being used anymore. Cmagkc9q Build Volume: 380mm x 284mm x 380mm Speed: 4115cm3 per hour Resolution 1200dpi Total Jobs printed to date: Upon request Total Printer work time: Upon request More information upon request

more

Listing

Germany

1,034 km

Wanted for sale: EOS 3D printer SLS

FLEXOR 380B

Call

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 2050 mm Measurements depth 1220 mm Measurements height 1600 mm Machine weight 800 kg Control Unit Brand MITSUBISHI Bw0e9njxt Model GOT1000 This Flexor 380B Printing machine was manufactured in 2012 in Poland. It is equipped with. MITSUBISHI GOT1000 control unit. Application Types 3DPrinting

more

Listing

EOS P385, P390, P395, P396, P700, P730 etc

Borken

785 km

EOS P385, P390, P395, P396, P700, P730 etc

Call

Condition: excellent (used), For sale we are looking for: Gzqwao EOS printers including; P100, P110, P380, P385, P390, P395, P396, P7xx, P720, P730, P760, P770 etc. FDM, SLA, SLM, SLS are common technologies. If you have anything, please don't hesitate to contact us!

more

Listing

Germany

1,034 km

Arburg Freeformer 200

Call

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 750 kg Control Unit Brand ARBURG This ARBURG Freeformer 200 3D Printer was made in 2018 in Germany. It is equipped with an ARBURG control unit. The machine has a Layer thickness of 0,15-0,34 mm. Application Types 3DPrinting Dl3qb7

more

Listing

Borken

785 km

3D Printer Freeformer

Arburg 300-3X

€90,000

Call

Condition: excellent (used), Arburg Freeformer 300-3X Here we offer a Arburg Freeformer 300-3X. Large freeformer 300-3X With high temperature option Additive manufacturing of complex functional components The new large freeformer 300-3X processes three components in the ARBURG Plastics Freeformer (AKF) and - for the first time worldwide - enables the industrial additive manufacturing of complex functional components in resilient hard/soft combinations with a support structure. The designation 300 stands for the available component support area in square centimeters. Compared to the freeformer 200-3X, the build envelope now offers 50 percent more space for parts with dimensions of up to 234 x 134 x 230 millimeters. "3X" stands in each case for the three axes of the component carrier that can be moved in the x, y and z directions. To the additive manufacturing Manufacturer Arburg Build volume [cm³] 7211 Installation space X [mm] 234 Installation space Y [mm] 134 Installation space Z [mm] 230 Printing material ABS, PC, PLA 2vbfxi Class Industry Operating voltage 400 / 400 V 3〜50 Hz Control voltage 24V= Total rated current 11 A Total power supply 7.8 kW Year of manufacture 2019 Running time 1483 hours Weight 1593 kg Type: Arburg Freeformer 300-3X Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

more

Listing

Germany

1,034 km

HP Jet Fusion 580 Color 3D printer

Call

Condition: ready for operation (used), Year of construction: 2021, Operating hours: 594 h, General Data Measurements width 190 mm Befot8m Measurements depth 332 mm Measurements height 248 mm Machine weight 630 kg This HP Jet Fusion 580 Color 3D printer was made in the year 2021 and has only 594 hours. Application Types 3DPrinting

more

Listing

Borken

785 km

3D printer PolyJet

Stratasys J750

€70,000

Call

Condition: excellent (used), Stratasys 3D Printer Here we offer you an Objet Stratasys 3D printer. Stratasys J750 3D printers allow you to streamline and optimize the process of making models from different materials with one build platform in the same print job and streamline it. In the design phase, you can use the J750 3D printers (with CAD software) to assign colors to components of a model. One can then save the model as a VRML file and have it printed with the desired colors. Cn93k98w The Stratasys J750 3D printer has a build envelope of 490 mm × 390 mm × 200 mm (19.3 x 15.35 x 7.8 in). AC power 100-120 VAC, 50-60 Hz, 13.5 A, 1-phase Or 220-240 VAC, 50-60 Hz, 7 A , 1-phase LAN requirements Required prior to printer installation. Static IP address. Materials Agilus30 family Digital ABS Plus Tango Transparent Vero family Veroflex VeroUltra Opaque SUP705, SUP706 Support material Applications rapid prototyping Concept models Medical models Equipment and devices Colored textures Total printing time on the machine is approx. 1483 hrs. Type: Stratasys 3D printer PolyJet printer J750 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

more

Listing

Germany

1,034 km

SLS 3D Printer Laser Sintering Machine

HP MJF 580

Call

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 1565 mm Measurements depth 955 mm Measurements height 1505 mm Control Unit Brand HP This HP MJF 580 3D Printer was manufactured in the year 2019 in Germany. It is equipped with a HP control unit. The machine has a printer resolution of 1200 dpi. Bgyrzp9ipd2 Application Types 3DPrinting

more

Listing

Borken

785 km

Farsoon SS403P-H

€220,000

Call

Condition: like new (used), Year of construction: 2023, Here we offer you a SLS 3D printer Farsoon SS403P-H in mint condition. Wh7i7nb3

more

Listing

Sweden

1,406 km

3D printer + debinding machine etc

Stratasys objet30 V3 pro

Call

Condition: ready for operation (used), Year of construction: 2015, This Stratasys objet30 V3 pro 3D Printer was manufactured in the year 2015 in Israel. Application Types 3DPrinting Bic99t8m0tk

more

Listing

Desktop Metal 3D-Metalldrucker-Studiosystem

Borken

785 km

Desktop Metal 3D-Metalldrucker-Studiosystem

€50,000

Call

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal Ct8k08u09n The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

more

Listing

Germany

1,034 km

3DSYSTEMS ProJet MJP 2500Plus

Call

Condition: ready for operation (used), Year of construction: 2020, Operating hours: 314 h, General Data Measurements width 294 mm Measurements depth 211 mm Measurements height 144 mm This 3D Systems ProJet MJP 2500Plus 3D Printer was manufactured in the year 2020 and has 314 production hours. The machine has a resolution of 800 x 900 x 790 DPI . Application Types 3DPrinting B8wbifhr

more

Listing

Borken

785 km

German RepRap X1000

€17,000

Call

Condition: excellent (used), German RepRap 3D Printer Ch7828hnls Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

more

Listing

Spain

1,660 km

Spectrum Z510

Call

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand WINDOWS Model OS This Spectrum-Z510 3D Printer was manufactured in the year 2014. It is equipped with a Windows OS control unit. The machine has a resolution of 600 x 540 dpi. Application Types Sryxwrgl 3DPrinting

more

Listing

Spain

1,660 km