Used 3D Printer for sale (4,120)

Year of construction: 2025, condition: new, new PMH filament line extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) with puller with filament accumulator (option) with winder and traverse guide Hodpjch Sfqsfx Ab Usfr MADE in GERMANY

Condition: ready for operation (used), Year of construction: 2022, Main Drive Number of axis 3 Additional Equipment Material starter kit PA11 ESD BASF This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator. Application Types Hfodsx D N U Nspfx Ab Uer 3D Printing

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 140L-C, Year of construction: 2022, operating hours: 5,854 h, total length: 1,450 mm, total height: 1,040 mm, total width: 1,250 mm, type of input current: AC, overall weight: 380 kg, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, electrical fuse: 16 A, table width: 500 mm, tank capacity: 140 l, table length: 700 mm, power: 8.3 kW (11.28 HP), travel speed (max.): 24,000 mm/min, number of print heads: 2, Refurbished Industrial Fused Filament Fabrication (FFF) Printer Includes: - 140L-C printer - Vibration-damped platform - License for slicing software (Simplify3D) Original price €73,800 General Technical Data: Model: HAGE 3D-140L-C Year of manufacture: 2022 Operating hours: 5,854 h Printing technology: FFF (Fused Filament Fabrication) Filament diameter: 1.75 mm; open material system (not limited to specific manufacturers) Build area (L x W): 700 mm x 500 mm Maximum print height: 400 mm Maximum build volume: 140,000 cm³ Dimensions and Weight: Hfodpfx Asxuh Nysb Uer Length: 1,450 mm Width: 1,250 mm Height: approx. 1,040 mm Weight: approx. 380 kg Temperature: Maximum printhead surface temperature: 300°C (optionally 450°C) Maximum build plate surface temperature: 180°C Maximum chamber temperature: 85°C Minimum operating temperature: +10°C Maximum operating temperature (ambient): +40°C Electrical Data: AC input: 400 V / 50 Hz Power supply: 24 V DC Connection: USB 3.0 / Ethernet Print Specifications: X-axis speed: up to 400 mm/s Y-axis speed: up to 400 mm/s Z-axis speed: up to 300 mm/min XY-plane print accuracy: < 0.1 mm Printer Control: Industrial controller (Sigmatek) Software: HAGE3D All documentation available Platform: 1,450 x 1,250 x 600 mm (LxWxH) Including storage compartments Including machine feet with vibration damping

Condition: not inspected (used), Dear Sir or Madam We hereby offer you the following device for sale: Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld Hfedpfowktwkjx Ab Ujr ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, Used ProJet SD6000 3D printing machine using stereolithographic technology. The machine has had extremely low hours usage during its life so far, having been installed and minimally utilised from time to time for research projects at the University of Sheffield AMRC research department known as the “Factory of the Future”. Serial # 10311178101 Year 2014 MACHINE CONSTRUCTION & FEATURES The ProJet 6000 HD SLA 3D provides SLA quality in a compact footprint and is a printer which puts the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivalled material availability, into a smaller footprint. 3D Printed SLA parts with unrivalled accuracy and surface finish. High Flexibility 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. • Two build platforms • One material delivery cart • Projet TM6000 Print tray • Washing Unit • Curing Unit 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. Print modes: High Definition, Ultra High Definition Resolution: (HD) 0.125mm, 0.125mm layer. (Ultra-high definition): 0.125mm, 0.10mm layer. Net construction volume: (short) 250 mm x 250 mm x 50 mm (medium) 250 mm x 250 mm x 125 mm, (tall) 250 mm x 250 mm x 250 mm. Accuracy: 0.025 – 0.05 mm per 25.4 mm of part dimension. BENEFITS: Stereolithography technology (SLA) Max build envelope capacity (W x D x H): 250 x 250 x 250 mm (10 x 10 x 10 in). Highest precision and accuracy Exchangeable Material Delivery Modules (MDMs). Hsdpstvfwksfx Ab Ujfr Utilizing two laser spot sizes per layer – no compromise between speed or feature detail. True line drawing in X and Y to accurately define curves. Industry-leading 3D Sprint software for file preparation and production. Cloud connectivity for predictive and prompt service with 3D Connect.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 720 h, total length: 700 mm, total height: 1,000 mm, total width: 760 mm, type of input current: AC, overall weight: 110 kg, input voltage: 230 V, The printer is in good optical and functional condition and ready for demonstration. The printer can process not only PLA, PETG, ASA, PA, etc., but also fiber-reinforced filaments (1.75mm). The IDEX printer is equipped with 2x 0.4 mm nozzles and can be accessed via WiFi, LAN, and USB. Hfodpfoxz N Rfox Ab Uer The printer is fitted with Klipper and can process models generated by the MINGDA-ORCASLICER. Due to over 700 operating hours, the 400x400x400 mm printer is being sold as a spare parts donor only, without any guarantee, even though it is in working condition. Viewing and test printing on site are welcome. The printer must be picked up in person in Genthin (39307) and is offered without packaging. Please refer to the relevant online resources for further technical data regarding this model. Packaging and transport must be organized by the buyer. Collection in person only!

Condition: good (used), HP JET FUSION 540 MULTI-JET FUNCTION COLOUR 3D PRINTER Hfjdpfjx H Tl Hox Ab Uor Model: VCVRA-1804. Printing Technology: Multi Jet Fusion (MJF). Machine under power, after full check up by official producer service. Material: PA12 (polyamide). Build Volume: 332 × 190 × 248 mm. Print Speed: 0.08 mm. Resolution: 1200 dpi. Print Speed: Up to 1817 cm³/h. Printing Time (full bed): 14–20 h. Powder Recovery: Up to 80%. Power: 6300 W. Power Supply: 200–240 V, 50/60 Hz, 36 A. Dimensions: 1565 × 955 × 1505 mm. Weight: 650 kg (operating). Noise level: 72–80 dB. Connectivity: Ethernet (Gigabit). Files: 3MF, STL, OBJ, VRML v2. Software: HP SmartStream 3D Build Manager, Command Center. S/No: M2K86A

Condition: ready for operation (used), Year of construction: 2020, Additional Equipment Supplied with wash-out basin and oil basin to remove the support material This 3DSYSTEMS Projet 2500 Plus was manufactured in 2020. A reliable plastic 3D printer, it offers efficient performance for various printing needs. Consider the opportunity to buy this 3DSYSTEMS Projet 2500 Plus plastic 3D printer. Contact us for more information. Application Types 3D Printing Hfodpfxox D Sipj Ab Uor

Condition: like new (used), Year of construction: 2016, For Sale: EOS P 396 – Guaranteed Working Condition Hfjdpfotp Up Esx Ab Uer This EOS P 396 was purchased from EOS in 2022 by the previous owner and is now available for resale in fully guaranteed working condition. Before the sale, the machine is thoroughly inspected and revised by our experienced technicians to ensure top performance. The package includes: • 2 build frames • Hydac water cooler Additional accessories are available upon request. We offer transport in the original EOS packaging and provide professional installation services to ensure a seamless experience. Warranty and maintenance plans are available to suit your needs. For more information or specific requests, please don’t hesitate to contact us. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs!

Condition: like new (used), functionality: fully functional, machine/vehicle number: D362931, Year of construction: 2023, total length: 265 mm, total height: 300 mm, total width: 330 mm, overall weight: 12 kg, input voltage: 220 V, power: 0.05 kW (0.07 HP), The DWS UV Curing Unit S2 is a professional post-curing solution specifically designed for SLA 3D printers, developed by the renowned Italian manufacturer, DWS. This S2 model is equipped with a high-efficiency UV light source, ensuring consistently even heat and light distribution for reliable, repeatable curing performance. Its robust UV intensity and precision allow for rapid, fully automated curing of printed objects within minutes. The DWS range also includes the M and XL curing units, which offer different curing chambers and capacities for various production needs. The S2 provides the most compact curing volume in the DWS lineup, ideal for single-part polymerization. It features a programmable timer (up to 30 minutes), enabling users to precisely control the curing cycle. Its intuitive controls, user-friendly interface, and compact footprint make it especially suitable for professional environments with limited space. The S2 also prioritizes user safety with practical features such as a secure automatic door lock and forced internal ventilation for heat management and operator protection. Purpose-built for professional SLA 3D printing workflows, the S2 serves as a crucial post-processing unit for models produced on DWS SLA printers. After initial printing, models require additional UV exposure for complete polymerization and structural stabilization. This secondary curing step not only enhances surface finish and smoothness but most importantly, ensures long-term durability and mechanical resistance. Curing Volume: The S2 offers a chamber measuring 160 x 160 x 160 mm (6.3 x 6.3 x 6.3 in), optimized for single part curing and effective polymerization. Controls: Operation is straightforward with a standard on/off switch and an integrated timer allowing settings up to 30 minutes, sufficient for the majority of SLA post-curing applications. The unit features a robust, white exterior with a pink-tinted transparent door, combining an aesthetically pleasing design with ergonomic convenience. Its compact size and professional appearance make it well-suited for a range of industries, including prototyping, small-batch production, jewelry manufacturing, dental labs, automotive repairs, and aerospace applications. Technical Specifications: - Curing volume: 160 x 160 x 160 mm - Timer range: 0–30 minutes - Forced internal ventilation - Internal dimensions: 216 x 266 x 219 mm Hjdpfxox Ehfpe Ab Uefr - Manufacturer: DWS, Italy - Safety door mechanism: Yes - Light source: UV LED - External dimensions: 265 x 300 x 330 mm - Power consumption: 50W - Power supply: 90–264V / 50–60Hz - Weight: 11.8 kg Price: The DWS UV Curing Unit S2 is priced at $1,990.00, reflecting its advanced curing capacity, professional feature set, and operational efficiency.

Condition: like new (used), functionality: fully functional, machine/vehicle number: D32070, Year of construction: 2021, operating hours: 41 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: DC, overall weight: 227 kg, input voltage: 220 V, Equipment: CE marking, For sale: Stratasys F370 (F123 Series) FDM Printer + SCA 3600—perfect for reliable, office-friendly production of functional parts, jigs & fixtures, and engineering prototypes. Package includes a substantial assortment of new, unopened consumables and print heads, as well as a Stratasys SCA 3600 support removal tank—allowing immediate, long-term operation. Key Features - Technology: FDM with soluble QSR support - Build Volume: approx. 355 × 254 × 355 mm (14 × 10 × 14 in) - Supported Materials (depending on print head): PLA, ABS, ASA, elastomers, ABS-CF10 - Supports soluble support material removal (NaOH/QSR) Includes (ALL supplied with the printer): Support Removal / Chemistry - 7× Stratasys sodium hydroxide (NaOH) boxes, ref 300-00600 Hodexk Tbgepfx Ab Ujfr - 1× QSR soluble support spool - 1× Stratasys SCA 3600 support removal tank Material Spools (all new) - 7× PLA Translucent - 1× PLA Light Blue - 1× ASA Yellow - 1× ABS Black - 1× ABS Yellow - 1× ABS Ivory Build Trays - 6× Standard build tray cartons - 1× High-temperature build tray carton Print Heads (all new) - 7× PLA Cooling heads - 4× PLA Extrusion heads - 4× Support/Model heads - 1× Elastomer head - 1× ABS-CF10 head Also included - Original accessories and cables - [User manuals / maintenance kit / crate—if applicable] - Test print prior to collection possible Logistics - Inspection: By appointment - Shipping: Palletized shipping available at buyer’s expense, or local collection possible - Payment: Bank transfer (invoice provided) Why choose this unit? A meticulously maintained F370 supplied with a rare, extensive set of build trays, print heads, and materials—covering PLA, ABS-CF10, elastomers, and more—plus the SCA 3600 tank for efficient soluble support removal. Minimize downtime and consumables lead time from day one.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: F170, Year of construction: 2018, operating hours: 2,732 h, Rarely used fully functional 3D Printer Hedpfx Asxhbxzjb Usfr Washing unit for cleaning of soluable support material included

Condition: like new (used), functionality: fully functional, machine/vehicle number: SG79434002, Year of construction: 2019, operating hours: 1,090 h, (English below) A very well-maintained HP MJF 4200 machine is for sale. Only PA12 was printed with it. This machine has only 1090 operating hours or 68 full build jobs (verifiable) on the clock. During operation, there was always an active HP service contract. This means all parts/problems were immediately resolved directly by HP. Since the machine is no longer in use (we have a newer version of this machine), there is no longer an active service contract with HP. The machine is connected to power and can be started. Print heads/powder/agents are not included in the offer, but can be obtained through us. If you have never worked with HP machines, we will be happy to help, as we have a lot of experience. Hfjdpfjrg Dv Aox Ab Uer The sale includes the printer + processing station + 2x build unit. This allows 24/7 printing. Pickup must be organized by the buyer or HP. We are happy to help with packing. All equipment can be viewed in Vienna. 3D printer + processing station + 2x build unit.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 211 h, General Data Measurements width 610 mm Measurements depth 650 mm Measurements height 1200 mm Additional Equipment Inert Gas Control System: Yes Hfsdpfx Aex D Ehrjb Ujr This SINTERIT lisa x was manufactured in 2023. A compact and efficient plastic 3D printer, it offers advanced printing capabilities suitable for various applications. Ideal for small to medium-sized projects requiring precision and reliability. Consider the opportunity to buy this SINTERIT lisa x plastic 3D printer. Contact us for more information. Application Types 3D Printing

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, total length: 406 mm, total height: 1,117 mm, total width: 406 mm, type of input current: AC, overall weight: 52 kg, input voltage: 220 V, input current: 5 A, input frequency: 50 Hz, positioning accuracy: 0.093 mm, feed length X-axis: 180 mm, feed length Y-axis: 101 mm, feed length Z-axis: 330 mm, EnvisionTEC Envision One cDLM XL – High-Precision 3D Printer (Demonstration Unit, Like New) For sale is an EnvisionTEC Envision One cDLM XL 3D printer—a professional high-end system for precise and rapid production of prototypes, functional parts, dental models, and small series. Condition: - Demonstration unit, very lightly used - Technically and visually like new - Clean, well-maintained, and ready for immediate use Technical Data: - Model: Envision One cDLM XL - Technology: Continuous Digital Light Manufacturing (cDLM) / DLP - Build Volume: 180 × 101 × 330 mm (X × Y × Z) - Native XY Resolution: 93 μm - Enhanced XY Resolution: up to approx. 60 μm - Layer Thickness: approx. 25 – 150 μm (depending on material) - Print Speed: up to approx. 45 mm/h - Light Source: High-performance DLP projector, 385 nm UV LED - Z-Axis: Dual linear guideway for high precision - Power Supply: 110/220 V, 50/60 Hz, 5 A - File Formats/Software: STL, Envision One RP Software External Dimensions & Weight: - Device dimensions: approx. 406 × 406 × 1,118 mm - Weight: approx. 52 kg Advantages: - Very high level of detail and outstanding surface quality - Ideal for dental, product design, industry, prototyping, and small batch production - Fast print times thanks to cDLM technology - Large build volume for a desktop SLA/DLP system - Robust, precise, and suitable for industrial use Hfjdpexzdp Aofx Ab Uor Note: Perfect for companies, laboratories, and workshops looking for a reliable, professional, and almost new device. Inspection possible.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 7,508 h, 💡 Unique Opportunity – Showroom Machine from Official Dealer This machine comes from the demonstration showroom of a former official Markforged and DWS dealer who operated in the Italian market until 2025. It was used exclusively for demonstration purposes, maintained in excellent condition, and has very few operating hours. Now available through 3D Machineries Srl, this represents a rare opportunity to purchase an almost new industrial 3D printer, at a fraction of its original cost – with immediate availability and full transparency on provenance and usage. -----LISTING DESCRIPTION----- Markforged – Complete Metal X System for Metal 3D Printing (Printer + Wash + Sintering Furnace + Accessories) Hodewzmgtopfx Ab Usfr 💰 New value over €200,000 For sale: complete Markforged Metal X system for metal 3D printing, including all necessary components for in-house metal part production using the bound metal printing process (FFF technology + debinding + sintering). ✅ The system comes from a showroom and is in excellent condition. Sale of individual components also considered. The package includes: 🔹 Markforged Metal X 3D Printer 🔹 Markforged Wash-1 – Debinding unit for binder removal 🔹 Markforged Sinter-2 – Industrial sintering furnace 🔹 Argon gas control panel – with reducers and quick couplings 🔹 Original Markforged case – with spare build plates 🔹 Mobile wheels for machine handling 🔹 Isolation transformer Key technical data: Printer model: Metal X (F-PR-5101) Sintering furnace model: Sinter-2 (F-SR-0002) Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Furnace power supply: 200–240 V AC 30+PE | 347–415 V AC 30+N+PE / 30 A Certifications: CE, FCC, UL, RCM, UKCA Assembled in the USA ✅ The Metal X system enables printing of stainless steel components (17-4 PH, 316L), pure copper, Inconel, and tool steel ✅ Ideal for machine shops, R&D departments, prototyping centers, and companies in the aerospace and automotive sectors 💡 The new value of the complete package is over €200,000. 📦 Option for separate sale: printer, wash unit, sintering furnace, accessories. 📩 Contact us to receive a detailed price list, images, videos, usage hours or to schedule an inspection.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SP0119240003037, Year of construction: 2019, input voltage: 240 V, Equipment: CE marking, Bound Metal Deposition™ metal 3D printing system composed of: - printer - debinder - sintering furnace - frequency converter for 60Hz furnace power supply. System in perfect condition, used for R&D in a climate-controlled environment. Printer equipped with 2 nozzles (0.40mm diameter) and one high-definition nozzle (0.25mm diameter). Furnace equipped with a technical gas supply system from an external installation. Set of original replacement parts for furnace (ceramic setters, graphite retort shelves, gaskets, filters, vacuum pump oil). Firmware updated to the latest release throughout the system. Material cartridges included: Hfedpoxlcldsfx Ab Usr 1x AISI 316L 1x 17-4PH 1x ceramic support

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,504 h, Equipment: ABS, compressor, Printer is fully functional and it is still under power. Printer was not used much often only 1504 working hours There are available all model materials licences available in 2019. New PM Kit is on site and it will be installed just before printer dispatch to the new customer Hjdow Imk Ropfx Ab Usfr Support removal unit type EFT-900 is available

Condition: reconditioned (used), For Sale: EOS P100 – Ready for Immediate Use KNOW WHAT YOU BUY! Fully revised and with warranty! This EOS P100 has been fully inspected and revised, making it ready for immediate use in your production environment. Included in the package: • 2 build frames • Set of hoppers Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Build volume: 200 x 250 x 330 mm • Laser type: Synrad 48-3, 30W CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer a wide range of plug-and-play materials, fully tested and optimized for use with EOS machines. Our Inframotion PA12 delivers top performance and provides significant cost savings compared to OEM powders, without compromising on quality. Choose our exclusive materials to drastically reduce your operational costs. Included Services: • Transport & Installation: Safe delivery in original EOS packaging and professional installation included. • Warranty & Maintenance Plans: Flexible options tailored to your specific needs. Hfjdperm Tdwsfx Ab Uer About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we distinguish ourselves through extensive expertise and unique services. What we offer: • Expert maintenance: Installation, servicing, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS machines. • Complete support: From transport to maintenance plans, we handle it all. Trust IM3D for reliable machines, superior materials, and the expertise to optimize your SLS production. Feel free to contact us for more information or inquiries!

Condition: ready for operation (used), Year of construction: 2021, This EVO-tech EL-102 V2 was manufactured in 2021. A plastic 3D printer featuring a robust 400 VAC system, it operates efficiently within a temperature range of 5–35 °C and humidity levels of 20–85% RH. It adheres to safety with IP41 protection and CE marking. Consider the opportunity to buy this EVO-tech EL-102 V2 plastic 3D printer. Contact us for more information. Hjdpfex D Sicsx Ab Usfr Application Types 3D Printing

Condition: excellent (used), Year of construction: 2019, operating hours: 1,500 h, 3D Printer Manufacturer: Stratasys Model: F370 Year of manufacture: 2019 Build volume (XYZ): 355 x 254 x 355 mm Layer thickness options: 0.330 mm, 0.254 mm, 0.178 mm, 0.127 mm Supported materials: ABS-M30, ASA, FDM TPU 92A, ABS-ESD7, PC-ABS, Diran 410MF07, ABS-CF10, FDM Nylon-CF10 Connectivity: Wired (Ethernet) and wireless (Wi-Fi) options Materials: Spools of 1470 cc: ABS white: 1 x 100% / 1 x 80% ASA grey: 1 x 10% PC-ABS black: 1 x 100%, 1 x 30% Spools of 980 cc: ABS blue: 1 x 10% Hfodpexk Uvlsfx Ab Uer TPU 92A: 1 x 100% QSR Support: 2 x 100%, 1 x 30% Accessories: - Build plates: 14 x new, 3 x used - Clean Station UW40 with large and small basket - Carrier 40 (cart for Cleaning Station) - Print head (TPU) new - Z-table Stratasys

Condition: like new (used), functionality: fully functional, Year of construction: 2022, total length: 1,480 mm, total height: 2,040 mm, total width: 850 mm, overall weight: 360 kg, input voltage: 220 V, input current: 32 A, Mint condition XYZPrinting MfgPro230xS 3D printer from 2022. The device has hardly been used and is in excellent condition - perfect for anyone looking for a reliable and powerful 3D printer. Why the XYZPrinting MfgPro230xS? Outstanding print quality: With its precise printing technology and a resolution of up to 50 micrometers, the MfgPro230xS delivers impressive print results that meet the highest industrial standards. High printing speed: Save valuable time during production. The MfgPro230xS offers fast printing speed without compromising on quality. Large installation space: With a generous print volume of 230 x 230 x 230 mm, even larger projects are no problem. Ease of use: The simple operation and intuitive interface make this 3D printer easily accessible even for beginners. Reliability: Thanks to its robust design and high-quality components, the MfgPro230xS is extremely durable and reliable. With the XYZprinting MfgPro230 xS industrial 3D printing system, the most complex structures can be produced in one piece and without support structures using selective laser sintering in your workshop. Developed for professional use as well as for use at institutes and universities. Accessories: Hfodpot H I Tvefx Ab Usr Sinterit FZ138 PHS Station Sinterit FZ101 ATEX Vacuum Cleaner 230V Sinterit Sandblaster SLS N2 Generator

Condition: used, Year of construction: 2014, working width 250 mm working length 250 mm work height max. 280 mm laser capacity in Watt 400 Rofin travel -z axis 10 - 1000 mm/s positioning accuracy +/- 0,1 mm repeating accuracy +/- 3,5 my capacity 6,8 kVA Required air-pressure 6-10 bar Type of gas Schutzgas Stickstoff 5 bar dimensions of the machine ca. 5,9 x 4,2 x 3 m range L-W-H 2,44 x 1,63 x 2,36 m weight 2 300 kg Little used Concept Laser M2 Cusing system for processing reactive and non- reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Nitrogen generator (in the other room, photo 7) External filter including fan and operating hours counter: 10464 - Photo 8. Storage container for the filter inserts. Transport device with lift for powder loading - photo 9. 6 stainless steel powder charging containers. Hjdpfewdiwysx Ab Uefr Pneum. Vibrating sieve for attachment to the powder container. Powder container rack for swap containers, dimensions 1.15 x 0.17 x 1.22 m - photo 10. Orange wet vacuum cleaner - photo 8. Selling due to production change. Price at the time € 1/2 mio! Vid 1: Machine outside, Vid 2: Machining - created on this machine, Vid 3: Slide show Workpiece creation on this machine + accessories. Machine dealer with own stock of 1600 m².

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, type of input current: three-phase, nozzle diameter: 1 mm, Best large scale 3d printer we have ever purchased and has run 4 years without missing a beat, Super reliable with zero failed prints. Hfedpjvblu Djfx Ab Usr New nozzle and new print bed just installed, ready for new owner.

Condition: excellent (used), 3D Metal Printer Manufacturer: CONCEPTLASER Model: M1-2010-01-01 Year of manufacture: 2010 Build volume: 250 x 250 x 275 mm Compressed air: 7 - 8 bar Inert gas: 5 bar Supply voltage: 3/N/PE AC400V +/-10% 50 Hz Hodsxk T Ndepfx Ab Ujfr Materials: CL50WS: 50 kg and CL91REW: 40 kg Equipment: - 1 Rofin fiber laser StarFiber 200 with 200 W - 1 process chamber (can be inertized) - 1 loading station - Nitrogen generator incl. 1000-liter pressure vessel - Conceptlaser automatic sieving station (2 material sets) - Explosion-proof vacuum cleaner Manufacturer: Ruwac, Year: 2023 - Various accessories (filters, seals) - Machine operating hours: 16,620 h - Laser source operating hours: approx. 11,000 h