Used 3D Scanner for sale (1,924)

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand 3D scanner, the “Shining 3D Scanner & EX Pro(H)” Item for sale: 1 x Shining 3D Scanner & EX Pro(H) We are happy to configure the machine to your requirements. Please feel free to contact us! Csdpfxszxxube Apmsri Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2014, We are offering a high-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Completely ready for connection, including all cables Note: The PC is password-protected, but the software is included on CD Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x... Set 1000x800 Complete GOM PC system in an aluminum case (running Linux), fully configured for the GOM ATOS IIe Software on CD; steel scale bars with ATOS evaluation dongle Replacement lamp Calibration panel (aluminum) CP20/MV 350x280 mm² Crjdpfx Apszpwg Rjmji Please feel free to contact us if you have any questions!

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 200 mm, total height: 850 mm, type of input current: AC, total width: 720 mm, total length: 950 mm, overall weight: 54 kg, input voltage: 230 V, table width: 500 mm, table length: 500 mm, ambient temperature (max.): 30 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, type plate available, KEYENCE VL-570 Optical 3D Coordinate Measuring Machine The VL-570, from Keyence’s VL-500 series, is a 3D measuring machine that measures various shapes from the stripe projection image of the object, which is captured with a black-and-white CMOS camera. The linear light from the light source (stripe projection light) is projected onto the object at an angle using the projection lens. Measurement types that can be performed with the VL-570: 3D measurement, plane measurement, profile measurement, 3D comparison measurement, profile comparison measurement. The basic unit consists of: - VL-500 control unit - VL-550 500mm base - VL-570 measuring head - VL-H2P comparison measurement module - VL-C2 cover - OP-88145 calibration plate Technical data: Repeatability: 2µm Measuring accuracy: 10µm Standard measuring mode (4M mode): 4 million measuring points Fine measuring mode (16M mode): 16 million measuring points Rotation mechanism: 360° Tilt mechanism: 45° Measuring range: Ø500mm x H 200mm User manual and quick start guides are included. Crjdez Ihkbopfx Apmsi New price: €52,350 (net) Upon request, the 3D coordinate measuring machine can be delivered within a 200 km radius of our company headquarters. Delivery costs will be agreed upon separately.

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Spare lamp Credpfx Ajw E I Itspmei Calibration panel (aluminium) CP20/MV 350x280mm²

Condition: like new (used), functionality: fully functional, machine/vehicle number: BC120058, Year of construction: 2022, operating hours: 260 h, repeat accuracy: 0.01 mm, As-new 3D scanner, model VL500 from Keyence, available at a competitive price. The device is in perfect working condition and will be offered for sale at the end of March 2026. The ideal cost-effective solution for surface scanning of technical components. Resolution: 0.001 mm; repeatability: 0.002 mm; measurement accuracy: ±0.01 mm. Original purchase price was over €80,000. Cedpfxex Dy Iao Apmori

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SK02UXKP0579, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, overall weight: 1 kg, repeat accuracy: 0.02 mm, Equipment: documentation/manual, ZEISS T-SCAN hawk metrology laser 3D scanner with accuracy 0,02mm + 0,035mm/m with 3 scanning modes (Standard - 7 red crosses, Fine - 5 blue lines, Single red line for deep holes). Manufacturing year 2022. Fully functional and ready to use. Crodpfxoyxy Sdo Apmei Included: 3D scanner Calibration panel Powerful Dell mobile workstation still under Dell Pro Support Warranty Software GOM/ZEISS Inspect 2021 licence on USB drive Rigid travel case Laptop bag All original documentation included Inspection under working conditions possible. ZEISS INSPECT 2021: • Opening and editing new and existing projects • Import of point clouds and polygon meshes • Creation, editing, and processing of polygon meshes • Construction of elements: basic geometries, points, sections, curves, surfaces, dimensions • Import of CAD data in standard formats: IGES, VDA, STEP, JT Open, STL, PLY • Use of common alignment methods • CAD comparison with color deviation mapping • Dimensioning and evaluation of form/position according to ISO GPS and ASME Y14.5 • Reporting module Delivery

Condition: good (used), Year of construction: 2022, functionality: fully functional, 3D Scanner Solutionix D500 Year of manufacture: 2022 Feature Specification Camera technology: 2 × 2.0 MP cameras Light source: Blue LED Measurement accuracy: Up to 0.01 mm Point-to-point distance: 0.056 mm Scan area (FOV): 92 × 70 × 60 mm Measuring range: Up to approx. 120 mm Volume capture area: Up to 385 mm³ Turntable: Integrated, fully automatic Calibration: Fully automatic Texture capture: High resolution, no additional color cameras required Interface: USB 3.0 Type B Software: ezScan 2017, compatible with Geomagic DesignX & ControlX Typical applications: Jewelry, precision mechanics, reverse engineering, cultural assets, 3D printing Assembly Table MT-400 Year of manufacture: 2015 Feature Specification Cedpfjxvyiujx Apmsri Load capacity: Up to 400 kg Max. table size: 1200 × 1900 mm Height adjustment: Electric, stepless, 750–1150 mm (partially up to 400 mm stroke) Tilt adjustment: Electric, 0–90° Support frame: With variable extension up to 300 mm Plate fixation: Via vertical clamp or quick-release clamp Mobility: 4 swivel castors with total lock Installation aid: Roller strip for sliding the plate into the control cabinet Material: Powder-coated steel base frame, MiniTec standard profiles

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, warranty duration: 1 months, positioning accuracy: 5 mm, Equipment: documentation/manual, The official FARO distributor is selling a demo unit – the FARO Orbis Premium mobile scanner. The package includes: - FARO Orbis Premium mobile 3D laser scanner - Datalogger portable control unit - 2 batteries - Battery charging station - Connection cable - Monopod tripod - Phone mount - FARO calibration certificate - Durable original case The unit is from 2025, comes with a calibration certificate, and has a valid warranty. It has been lightly used – for customer demonstrations and at trade shows. The mobile scanner is in excellent condition. It provides 3D laser scanning with 5mm accuracy, allowing for very fast scanning of large areas, buildings, and rooms. The stationary Flash mode allows scanning with 2mm accuracy. Technical specifications: - Accuracy: 5mm (2mm in Flash mode) - Scanning distance: 120m - LIDAR channels: 32 - Camera: 72MP - Operating time with 1 battery: 3-4 hours Crodszzdpvjpfx Apmsi The unit is located in Riga, Latvia, and can be viewed in person or remotely.

Condition: used, functionality: fully functional, total length: 262 mm, total height: 158 mm, total width: 158 mm, overall weight: 1 kg, Artec Eva professional 3D scanner, tested and fully functional. Handheld scanner with white structured light technology (LED), ideal for scanning medium and large objects with high-quality color capture. KEY FEATURES: - 3D resolution: up to 0.2 mm - Accuracy: up to 0.1 mm - Capture speed: 16 FPS (up to 2 million points per second) - Technology: white structured light (safe for scanning people) - Color scanning with 1.3 MP texture - Working distance: 0.4 - 1.0 m - Weight: 0.85 kg (portable, handheld) - Power: 12V DC 2A - Manufactured in Luxembourg - Includes original carrying case and cabling APPLICATIONS: medical sector (body scanning, orthopedics, prosthetics), automotive (reverse engineering of medium-sized parts, dimensional control), heritage and museums (sculptures, archaeological artifacts), sports and technical apparel (human body scanning, custom helmets), forensics and criminology, VFX, and video games. Csdpfey U H Rxox Apmeri The Artec Eva is the world’s best-selling portable 3D scanner thanks to its combination of accuracy, ease of use, and versatility. Unit sourced from a professional service bureau. Available for demonstration before purchase. Location: Spain. Easy shipping throughout Europe. Please inquire about the type of Artec Studio software license and included accessories.

Condition: used, In this offer you purchase a used dental 3D scanner ‘CADstar CS Neo’ Crsdpfx Apot H Eudjmoi Object of sale: 1 x CADstar CS Neo with the following equipment: incl. calibration body incl. holder + arti base incl. PC Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: ready for operation (used), A portable optical Creaform 3D laser scanner is offered. Accuracy: 0.03mm, volumetric accuracy: 0.02mm + 0.06mm/m, resolution: 0.05mm, measurement rate: 480000/s, scanning area X/Y: 275mm/250mm, stand-off distance: 300mm, depth of field: 250mm, weight: 0.85kg. Including HP ZBook, Windows 10 and approx. 50 packs of positioning targets. Calibration at Creaform passed on 16 December 2020. Inspection possible by appointment. Crjdpfx Apezmh S Ssmei

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair Crsdot Irffepfx Apmsi *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Year of construction: 2008, operating hours: 0 h, condition: new, machine/vehicle number: DW-A-414, Dental Wings Dental Wing 3D Scanner DW-5-140 Year of manufacture 2008. Serial no: DW-A-414 Accessories in a case please check the pictures, also the connection USB cables with the computer. no USB key software is available, only the installation CD. Lamp lighting is confirmed Required PC connection • Detailed operation is uninspected because details are unknown Power 100 W, Input 100—240V, 50-60 Hz Condition: Power ON ok, but not tested. The scanner is new and has never used. price Euro 1.300 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Cjdpfx Ashalgdjpmjri

Condition: excellent (used), Year of construction: 2015, The Heuft Reflexx – high speed empty bottle and label inspector. Model Reflexx HBBRTIXX Spectrum TX controller Capacity to 50.000 bph. Cjdpfx Apoytrdtjmjri YOM 2015 EXCELLENT CONDITION It’s more than just a quick check. The HEUFT system diligently inspecting empty glass bottles for any defects before they move on to be filled is comprehensive quality assurance that brings immense value to the entire bottling process. Here’s why these HEUFT inspection solutions are so critical: 1. Full Coverage, Zero Blind Spots: The system doesn’t just glance at the bottle; it performs an all-surface, all-angle inspection of the base, sidewalls, finish, and threads. This level of detail is vital for spotting tiny defects the human eye can easily miss. 2. Advanced Detection Technologies: Utilizing a powerful combination of high-resolution cameras, smart AI image processing, and in some models, patented pulsed X-ray technology. This includes: - Glass Defects: Cracks, chips, inclusions, and finish damage. - Foreign Objects: Everything from foil and cigarette butts to insects, residual liquid (like caustic lye or oil), and, most dangerously, glass splinters hidden in the bottle base. 3. Low False Reject Rate: Thanks to intelligent image analysis (like HEUFT reflexx A.I.), they can distinguish between a critical defect and a harmless cosmetic blemish, meaning you don’t waste good, perfectly usable bottles. HEUFT SPECTRUM TX Controlling centrally: one platform for all requirements. Precise, network-compatible and cross-system: the HEUFT SPECTRUM TX forms the basis for different technologies, modules and functions. The devices of the generation of the same name can be exactly adapted to individual requirements on site and retrofitted at any time due to this universal platform.

Condition: good (used), functionality: fully functional, machine/vehicle number: J5500144, Year of construction: 2020, operating hours: 5,336 h, Stratasys J55 Prime professional full-color PolyJet 3D printer available due to upgrade to a larger production system. The machine was professionally maintained during operation and is suitable for design studios, prototyping labs, universities, and research environments requiring high-quality multi-material and full-color models. Specifications Total printing hours: approx. 5,336 h Printheads recently replaced (approx. 250 h use) Professionally serviced during operational period Machine idle approx. 1 year so technical inspection recommended prior to use Original system value > €120,000 Stratasys ProAero Air Extractor (PolyJet air filtration unit) included Stratasys Scale / Scanner included Standard cables and connections included Available service history documentation Typical applications Industrial design & product development Architecture and design prototypes Medical and educational models Multi-material and full-color prototyping Additive manufacturing research Crjdpfx Apoytg Rzjmoi Machine available for inspection by appointment. Collection location: Belgium. Please contact us for additional information, photos, or inspection arrangements.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 183 h, total length: 685 mm, total height: 1,070 mm, total width: 645 mm, overall weight: 120 kg, input voltage: 230 V, laser power: 30 W, feed length X-axis: 165 mm, feed length Y-axis: 165 mm, feed length Z-axis: 300 mm, space requirement length: 1,495 mm, space requirement height: 1,870 mm, space requirement width: 1,255 mm, Formlabs Fuse 1+ 30W SLS Production Cell: 2 Printers, Fuse Sift with Industrial Vacuum, Fuse Blast with Polishing System and 4 Build Chambers Complete, ready-to-run SLS production system in great condition, sold as one package What is included - 2 x Formlabs Fuse 1+ 30W SLS 3D printers (230V), each with 2 build chambers (4 in total) - 1 x Formlabs Fuse Sift powder recovery station (230V) - 1 x Formlabs Industrial Vacuum 230V, supplied with the Sift [hose and accessories included] - 1 x Formlabs Fuse Blast automated blasting station with the Fuse Blast Polishing System upgrade (cleans and polishes in one step) Hours and condition - Printer 1: 1,369.68 print hours Cjdpfx Aj Adqx Topmjri - Printer 2: 183.6 print hours (very low) - All units in great condition. Serial numbers available on request. Why this setup Four build chambers across two printers let you swap chambers and start a new print as soon as the last one finishes. The Sift and vacuum handle powder recovery and the Blast handles finishing, so no further post-processing equipment is needed. Key specification (per printer) - Build volume: 165 x 165 x 300 mm - Laser: ytterbium fibre, 30 W - Layer thickness: 110 microns - Materials supported by Formlabs: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A - Power: 230V, dedicated circuit Offers: offers on the full package are welcome. A separate sale of one printer may be considered for the right offer; please message to discuss. Collection and delivery: not included in the price. The buyer arranges and pays for collection or pallet freight, including packing and loading. Each printer weighs about 120 kg without chamber or powder, so a forklift or tail-lift is needed. Allow access of about 125.5 x 149.5 x 187 cm per machine. Viewing by appointment.

Condition: used, 3D MICROMAC Type: microCUT laser marking system microCUT Enclosure IPG laser source Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60Hz Power consumption 51.3kW Control voltage 24/5VDC Main fuse NH 100A gG Modules: Laser source: Mains voltage 400 VAC Frequency 50/60Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Machine: Consumable media Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Setpoint tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Setpoint tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG Type: YLS-5000 Mode Continuous, Quasi-continuous Wavelength 1070nm Power 5kW Frequency 5 kHZ Scanner manufacturer Raylase AG Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60Hz Net cooling capacity 40.3 kW Camera system: Manufacturer e2V Type: AVIIVA TM UM2 GE Cedpjzdqp Iofx Apmori Quality cameras: Manufacturer e2v type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration Type: DOWNFLO Oval 3-3 Max. Fan speed 3000 rpm Working pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: microCUT laser marking system Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: P2060, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: RAYCUS, laser source model: fiberlaser, laser power: 3,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, workpiece weight (max.): 27 kg, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 12,000 mm, total width: 5,000 mm, total height: 5,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Fiber laser tube cutting machine Golden Laser P2060A-3D 3000 W for sale. The machine is in daily production use, fully functional, and can be inspected while powered on. Main configuration: Laser source: Raycus 3,000 W fiber laser Cutting head: 3D 5-axis bevel cutting head with auto focus CNC control and software: PA (Germany) Nesting software: Lantek (Spain) Servo motors: Yaskawa (Japan) Reducers: APEX (Taiwan); gears and rack: alpha (Germany) Linear guides: HIWIN (Taiwan) Proportional valve: SMC (Japan) Main electrical parts: Schneider (France) Chiller: Tongfei Automatic bundle loader (load size 800 x 800 x 6,000 mm) Automatic unloading / collecting device (max. collecting length 3,000 mm) Pneumatic double chucks with auto-centering Floating support system and floating rear material support Weld seam recognition camera (round and rectangular tubes) Automatic lubrication Dust extraction unit / air dust dryer 5.5 kW Technical data: Tube diameter range: 20–200 mm Max. tube length: 6,000 mm Tube types: round, square, rectangular, oval, obround, H, angle, I and irregular profiles Max. tube weight: 37 kg/m Remnant length: 50–80 mm (Ø < 100 mm), 180–200 mm (Ø ≥ 100 mm) X/Y positioning speed: 95 m/min X/Y acceleration: 1.5 G Chuck rotation speed: 160 rpm Positioning accuracy: ±0.03 mm Axis travel: X 7,180 mm / Y 250 mm / Z 125 mm Axis motor power: X 3 kW, Y 2 kW, Z 2 kW Machine power: 30 kW, 380 V AC, 50/60 Hz Machine weight: approx. 12 t Footprint: approx. 12 x 5.5 m Cjdpfx As Afwzwjpmjri Year of manufacture: 2022 Location: Slovenia Inspection and test cutting possible by appointment.

Condition: used, 3D systems Codpfxezd Tt Aj Apmjri Here, we offer a 3D printer. Solid-State Nd:YVO4 with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr™ coating system: Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Layer thickness: Minimum 0.05mm, Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominally 0.13mm in standard mode Large line detection: Nominally 0.76mm Maximum drawing speed Edge detection: 3.5m/sec Large line detection: 25m/sec Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Size (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, machine/vehicle number: L0290, Year of construction: 2014, operating hours: 26,052 h, total length: 2,771 mm, total height: 2,281 mm, total width: 1,684 mm, type of input current: three-phase, overall weight: 2,869 kg, input voltage: 230 V, input current: 34 A, compressed air connection: 7 bar, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 29 °C, positioning accuracy: 0.089 mm, electrical fuse: 40 A, feed length X-axis: 914 mm, feed length Y-axis: 610 mm, feed length Z-axis: 914 mm, power: 13.5 kW (18.35 HP), space requirement length: 4,210 mm, space requirement height: 2,941 mm, space requirement width: 3,573 mm, Stratasys Fortus 900mc – 2014 | Fully Maintained | Complete System The machine has been fully maintained by SYS Systems UK. Last calibrated 16/7/26. Last print was run on 14/10/26. Manufacturer: Stratasys Model: Fortus 900mc Manufactured: 2014 Technology: FDM (Fused Deposition Modeling) Condition: Used Maintenance: Fully maintained by SYS Systems UK - Updated to Gen2 Plus spec in 15/1/2025. Build volume: 914 × 610 × 914 mm Layer thickness: 0.127,0.178,0.254,0.330,0.508 mm Material License Included: ABS-M30, ABS M30i, ABSi, ABS-ESD7, ASA, Nylon 6, Nylon 12, PC, PC-ABS, PC-ISO, PPSF, ST-130, Ultem 9085, Ultem 9085 CG, Ultem 1010, Ultem 1010-CG Included: Various Nozzles, Build sheets, model and Support material cartridges. Printer can be viewed. Location: Available for inspection by appointment. Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. Additional Support removal wash tank also available separately (500L heated tank) please ask for further details. Crsdpj Ah Snkjfx Apmsi

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,500 mm, overall weight: 1,000 kg, table length: 3,000 mm, workpiece weight (max.): 4,000 kg, borehole diameter: 28 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Table plate thickness: 15 mm Workpiece weight: max. 4,000 kg Bore diameter: 28 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,500 x 1,000 mm Empty weight: 1,000 kg Number of transport packages: 1 Included accessories: 4× 3D angle brackets, 300 mm (2× left, 2× right) 6× flat stops, 150 mm 6× flat stops, 225 mm 1× protractor 2× V-blocks 1× eccentric stop Code Af Hdnspfx Apmeri 1× flat angle bracket 12× clamping screws 12× quick clamps

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,854 h, total length: 2,250 mm, total height: 1,450 mm, total width: 1,250 mm, type of input current: three-phase, overall weight: 750 kg, input voltage: 230 V, input current: 30 A, input frequency: 50 Hz, feed length X-axis: 380 mm, feed length Y-axis: 284 mm, feed length Z-axis: 380 mm, noise level: 78 dB, HP Jet Fusion 3D 4200 – 2017 | Fully Maintained | Complete System HP Jet Fusion 3D 4200 industrial 3D printing system, manufactured in 2017. The machine has been fully maintained by HP . Last print was run on 30th October 2026. It is still able to actively print. Manufacturer: HP Model: Jet Fusion 3D 4200 Manufactured: 2017 Technology: HP Multi Jet Fusion (MJF) Condition: Used Maintenance: Fully maintained by HP Build volume: 380 × 284 × 380 mm Layer thickness: 80 microns Included: HP Processing Station Build Units: 2 × HP Jet Fusion 3D Build Units Printer can be viewed. Location: Available for inspection by appointment. System Includes HP Jet Fusion 3D 4200 Printer HP Processing Station with fast cool. 2 × Build Units 7 x 220L drums of PA12-HR (clean reusable powder feed stock) 1 x Spare Steel 220L Drum to suit Processing Station 1 x Pack of various consumables (print heads,fusing agents, detailing agents, fusing lamps, wiper blades, filters, cleaning rolls) Sold ex-works. Crodpfxe Ah Hcao Apmei The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. The HP service contract is active until 30/1/2027. The buyer will need to arrange a new service contract and recertification with HP on relocation. That cost is not included in our price. Sand Blaster Cabinet and ATEX Vacuum also available to purchase separately - please ask for details

Condition: used, functionality: limited functionality, Year of construction: 2013, operating hours: 5,400 h, Stratasys Objet Connex 500 industrial multi-material PolyJet 3D printer available for sale in the UK. The machine has approximately 5,400 operating hours and powers up successfully. When inspected, the machine was not displaying print-head errors. The printer has not recently completed a test print because the printing materials/resins currently installed have expired. We are therefore selling the machine transparently as requiring recommissioning and fresh materials before full production operation can be confirmed. The Connex 500 is an industrial PolyJet additive manufacturing system designed for professional prototyping and multi-material applications. Its large build platform and ability to work with different material characteristics made the Connex range particularly suited to engineering, product development and prototype production. The machine was removed from a commercial environment and is now surplus to requirements. Crodpszy Rwqsfx Apmji Known condition: Powers up successfully Approximately 5,400 operating hours No print-head errors observed during inspection Existing resin/material is expired Full print cycle has not been tested with fresh material Offered in its present condition Inspection welcomed prior to purchase This could represent a good opportunity for an existing Stratasys/Objet user, specialist reseller or refurbishment company familiar with the Connex platform. The machine is located in the United Kingdom. Further photographs and a video showing the machine powered on can be supplied on request.

Condition: used, functionality: fully functional, machine/vehicle number: P15176, Year of construction: 2014, operating hours: 11,531 h, total length: 838 mm, total height: 1,143 mm, total width: 737 mm, type of input current: AC, overall weight: 148 kg, input voltage: 240 V, input current: 6 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, electrical fuse: 13 A, feed length X-axis: 254 mm, feed length Y-axis: 254 mm, feed length Z-axis: 305 mm, Stratasys Fortus 250mc FDM 3D Printer – 2014 | Fully Maintained | Complete System The machine has been fully maintained by SYS Systems UK. Last calibrated 26/1/26. Last print was run on 24/11/25. Operating hours 11,531 h Manufacturer: Stratasys Crsdps Ah R T Rjfx Apmei Model: Fortus 250mc Manufactured: 2014 Technology: FDM (Fused Deposition Modelling) Condition: Used Maintenance: Fully maintained by SYS Systems UK - Fans, Motion belts and ducting recently renewed. Build volume: 254 × 254 × 305 mm Layer thickness: 0.178,0.254,0.330 mm Included: Various Nozzles, Build Plates, ABS and Support material cartridges, Open materials chip re-programmer kit, Custom enhanced purge bin and purge shelf kit. Printer can be viewed. Location: Available for inspection by appointment. Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. Also available, support removal soak box for post processing water soluble support material. ask for more details.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 2,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 800 mm, total height: 3,000 mm, total width: 1,800 mm, total length: 3,200 mm, overall weight: 4,800 kg, Equipment: documentation/manual, - with RENISHAW PH 10 M probe - including accessories such as measuring tips, test specimens, etc. - including computer, monitors, keyboard and mouse Please note: does not include workbench or office cabinet Collection: the collection has to take place on a fixed date to be confirmed between 13.01. and 14.01.2027. FCA D-71364 Winnenden - loading in truck Crsdps Ahg Nfsfx Apmsi