Machine No. 17
Control Heidenhain 530i TNC
Table Load 30,000 kgs
Portal clearance width 4140mm
Portal clearance height 2400mm
Vartical swing milling head C-axis +/- 275 degrees
Horizontal swing milling head A-axis + 95 / - 125 degrees
Longitudianal travel, X Axis 6000mm
Cross Travel. Y Axis 3000mm
Vertical Travel. Z Axis 1500mm
Feed Rate 20,000mm/min
Tool holding HSK
ATC 29 Station
Maximum tool lenght 300mm
Maximum tool diameter 80mm
Maximum tool weight 5 kg
Input 400/3/50hz / 40kW
Speeds 18,...
The FFZ 30/60 CNC is a portal milling machine with a table width of 3000mm and an X-axis travel of +/- 6000mm
Technical specifications:
DIMENSIONS OF THE MACHINE
Length [mm] 13 200
Width [mm] 6 000
Height [mm] 9 800
PORTAL PASSAGE
Height [mm] x width [mm] 3 200 x 3 370
Distance between clamping surface and lower edge of the milling head min./max. mm] 0000 / 2500
WORKING SECTOR
X-axis travel of machine table [mm] +/-6000
Y-axis travel milling unit [mm] 4 100
Z-axis plunger [mm] 1 500
Cross...
Technical specifications:
Control unit: Heidenhain TNC310
Table size: 700 x 500 mm
X-Axis travel: 500 mm
Y-Axis travel: 400 mm
Z-Axis travel: 400 mm
Table load: 200 Kg
Swivel range: 95° - 10°
Spindle motor: 15 kW
Speed range: 20 - 8000 Rpm
Feed: 4500 min-1
Dimensions:
Length: 4000 mm
Height: 3600 mm
Width: 2500 mm
Weight: 3000 Kg
More info:
5 axis machine. With turning range by handwheel on the side (B-axis), rotate by handwheel (C axis).
Sk40 recording, the machine has been used very littl...
CNC Milling Machine 5-axis SAHOS DYNAMIC FC3000CNC
oś Z - 700mm
oś X - 3000mm
oś Y - 1500mm
Ez7iqznoo
Tool holder type HSK-F63
12kW S6 electric spindle power
The machine is in very good condition.
Please contact for details.
MATEC 5-axis CNC VMC and Milling Machine
Type:30HV 2000
Year:2006
Control:BOSCH TYP3
4 axis controlled simultaneously
XYZ travel:2000x600x700mm
NC table (Mountable rotating table)
NC controlled milling head
Table size:2500x635mm
Ntwbl
Spindle taper:SK40
Spindle speed:18000rpm
Power:30kW
Toolchanger:48atc
New spindle in January 2013
Weight of the machine:6000-8000kg
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where poss...
5-axis controlled milling centre
Control: E 160 CNC
Work piece clamping: 2 axis cradle type with tool-taper clamping
Indexing of work piece cradle (A/B) full rotary and tilting controlled
Traverses:
X 1050 mm
Y 420 mm
Z 420 mm
Spindle motor rating: 9 kW
0ye3kmdw
Spindle speeds to: 4000 rpm
Gear steps 2
Torque: 450 Nm
Pick up magazine tool positions: 15 with 2 places for extra large tools
Tool taper: ISO 40
Equipped with:
2 Axis clamping system for parts, taper ISO 50;
Vertical milling head ...
CNC Milling Machine 5-axis
Z axis - 1300mm
X axis - 4000mm
Y axis - 12500mm
Tool holder type HSK-F63
Bjfv9j2jbr
12kW S6 electric spindle power
35 kW total power
The machine is in very good condition.
Please contact for details.
Ref. -No.: 10042
Brand: CME
Type of control: CNC
Control: HEIDENHAIN TNC-i530
Storage location: Mülheim an der Ruhr
Country of origin: Spanien
X-Travel: 5500 mm
Y-Travel: 1500 mm
3h3zl8j9
Z-Travel: 2000 mm
Table-Size (Lxw): 1500 x 1500 mm
Direct drive: 4500 1 / min
Number of round tables: 2 Pcs
Tool changer: vorhanden
Tool places: 60
In good technical condition.
FANUC control system
X axis 500.0 mm
Y axis 400.0 mm
Blqd2uyvn0
Z axis 400.0 mm
Total power 10 kVA
Table length 660.0 mm
Table width 360.0 mm
Number of tools 20.0
Spindle taper BT40
Max. Spindle speed 8000 rpm
Internal water cooling.
Machine dimensions: 2700.0 mm × 2300.0 mm × 2400.0 mm
Weight: 3200 kg
LONGITUDINAL TRAVEL: 2500 mm
TRANSVERSAL TRAVEL: 1000 mm
VERTICAL TRAVEL: 1500 mm
RAM TRAVEL: 1000 mm
RAPID FEEDS L-T-V: 15 m/min
TABLE SIZE: 1250 x 1500 mm
MAX ADMITTED LOAD: 5000 Kg
SPINDLE: 3000 rpm; 15-19 kW; 930 Nm; ISO 50
Dsipxoh
CONTROL UNIT: HEIDENHAIN iTNC 530
GEAR BOX: 2-STEPS
WEIGHT: 20000 Kg
OVERALL DIMENSIONS: 5300 x 6000 x 4100 mm
ACCESSORIES: PORTABLE HANDWHEEL
PRICE: On demand
Serial No. 29125
Control Heidenhain TNC 430 CA
Reciprocating Table Size 4000mm x 1000mm
Table Load 10,000 Kgs
Longitudinal Travel X = 3713 mm
Cross Travel Y = 1214 mm
Vertical Travel Z = 1005 mm
Longitudinal Travel & Vertical Rapid Feeds 15000mm/min
Spindle Taper 40 INT
Head Swivels 180 Degrees on 'A' Axis, 360 Degrees on 'B' Axis
Input 415/3/50AC 50KVA. Main motor 8kW
F9y9pel
Max, Height Spindle Nose to Table 1090mm
Spindle Speeds 3000 - 15000 rpm
Feed Rate 6 - 5000 mm/min
Fitted with 30 Tool...
Manufacturer: USA
The machine has software tools
Taper 40, Max Speed 8100 rpm
3 Axis, X=1016 mm, Y=508 mm, Z=635 mm
Tool capacity 20
Max rating of spindle 22,4 kW
Table L x W: 1219 mm x 457 mm
the machine has no cooling through the spindle
The cutter is without 4 axis and without vices
Gru2py9
Manufacturer NICOLÁS CORREA
Model FP 40/50 5 EJES
Year 1997
CNC SIEMENS 840D
Oj0jd
Table Surface 5.000 x 2.000 mm
Longitudinal Travel (X Axis) 5.000 mm
Cross Travel (Y Axis) 3.250 mm
Vertical Travel (Z axis) 1.050 mm
Distance Between Columns 2.505 mm
Rapid Feed (X Axis) 15.000 mm/min
Rapid Feed (Y, Z Axis) 12.000 mm/min
Max. Working Feed 5.000 mm/min
Taper ISO-50
Auto Indexing Head 0,001º/0,001º (Continuous 5 Axis) INCLUDED
Head Speed 30-4.000 r.p.m.
Main Engine Power 30 kW
Speed Ranges 2
Porta...
with robot, control Siemens Sinumerik 840 D, dressing wheel, 2 grinding spindles.
Working range diameter 8-16,5 mm (limited)
Clamping length with robot / hand 80-140 / 250 mm
Twist direction right/left/straight
Angle of twist 0-42
Ysxj8g
grinding wheel diameter 200 mm
max. grinding length 650 mm
max. grinding width 325 mm
grinding diameter min./max. 100/250 mm
table clamping area 1000 x 287 mm
Spindle speeds from 2000-6000 rpm
power 35 kW
Weight approx. 2.5 t
Accessories: machine bed extended, m...
Ref. -No.: 10075
Brand: FERMAT
Type of control: CNC
Control: Heidenhain iTNC 530
Storage location: Mülheim an der Ruhr
Country of origin: Deutschland
Bhze3en
Installation: 2014
X-Travel: 9800 mm
Y-Travel: 3500 mm
Z-Travel: 600 mm
W-Axis: 730 mm
Spindle Diameter: 130 mm
Spindle Taper: SK 50
Rotary Table (Lxw): 2000 x 2400 mm
Table Load: 20000 kg
Support bearing: 250 mm
Main Drive: 37 kW
Numbers Of Pallets: 2
Size Of Pallet: 4000 x 1885 mm
Servo drive: 2 Pcs
pinion: 2 Pcs
Internal cooling: 30 b...
Leasing offer:
The price quoted refers to the monthly instalment and purchase through a leasing company.
Leasing object: CNC 5-axis HSC machining centre EXERON
Acquisition value: 159.000,00 Euro
Duration: 48 months
Leasing rate per month: 3.350,00 Euro
Payment frequency: monthly
Bfetanfmqk
Processing fee: one-time 80,00 Euro
Imputed residual value: 18.000,00 Euro
The prerequisite is a positive credit report.
----
CNC 5-axis HSC vertical machining center EXERON type HSC-MP 7/5 P
Linear milling ce...
CNC- MILLING MACHINE
Make MATRA (JAPAN), type KIRA KV- 5 MC, year of construction 1987,
Control FANUC 0 M,
x/y/z 660/ 410/ 500 mm, shuttle table 600 x 400 mm,
Tool changer 20-fold, chip conveyor,
CNC- MILLING MACHINE
Make MATRA (JAPAN), type KIRA 5 MC - R 6, year of construction 1983,
Control unit FANUC 6 M,
x/y/z 510/ 410/ 500 mm, table 600 x 400 mm,
Tool changer 18-fold
Oj0sp
Package price (2 machines) 4400 EUR
Brand: Cover
Bm7yujrshl
Type: FP 5 NC/T
Serial number: 2847-0100
Operating voltage: 400 V
Frequency: 50/60 HZ
Rated current: 31 A
Control: Dialog 11
Machining range: X axis 710 mm, Y axis 600 mm, Z axis 445 mm
Speed range infinitely variable 0 - 6,300 rpm
feed drive infinitely variable programmable 1 - 3.600 mm/min
Angular table 1000 x 600 mm with 8 T-slots
hydraulically releasable tool holder SK 40
30-fold tool changer
Dimensions: 3800 X 2400 X 2100 mm
Weight: 5000 kilo approx.
4 Spindle, Trafels: X-300, Y-1390, Z-300mm,
CNC Control : NUM, 41 KW, 4.Achse +/- 180Grad,
Ixfmspzx
4 Spindle Precise von 16.000 bis 160.000 rpm max.
mit Spaenefoerderer, Rueckkuehlaggregat, ATC, ...
HAAS CNC milling center VF 5
VF-5/50HE
Year 2008
WKZ Recording SK50
Speed 7.500min1
Travel X=1524mm Y=660mm Z=635mm
Bqwshx2
WKZ Magazine 30 places
Dimension H=3,2m W=3,9m D=3m
Machines Weight 7,6to
Machine Fully functional
with pre-riveting for 4 axis, IKZ internal cooling, probe ,
Tool measurement etc.
Machine has been serviced regularly
Machine is operational,
Can be visited on site under power (in Grevenbroich 41516)
The price is ex location.
CNC control Heidenhain TNC 310
electronical hand wheel
coolant device
T92ymoebi
Technische Daten: /technical details
X Weg/ x travel 1500 mm
Y Weg/ y travel 450 mm
Z Weg / z travel 400 mm
Drehzahlbereich / spindle speed range 50-5000 UpM / rpm
Vorschub / infeed 10-4000 mm/min
Eilgang X, Y, Z / rapid feed x, y, z 12, 12, 9 m/min.
Spindelaufnahme / spindle taper SK 40
Tischgroesse / table dimensions 1800x500 mm
Antriebsleistung Spindel / drive capacity spindle 9 kW
Gewicht der Masch...
CNC 5-axis HSC vertical machining center EXERON type HSC-MP 7/5 P
Linear milling center with CNC control Heidenhain iTNC 530 HSCI FS
Make no. 6876 Year of construction 2015
Travel distances X: 670 mm, Y: 250 mm, Z: 400 mm
B axis +/? 105 °
C-axis 360° endless
Feed speed 1 to 40000 mm/min.
Rapid traverse in X, Y and Z 40 m/min
turning speeds B-axis 190 rpm.
turning speeds C-axis 250 rpm.
workpiece clamping table Ø 185 mm
distance table/spindle nose 20 - 420 mm
Table load max. 60 kg
Tool holder HSK...
CNC Milling-SCM
3 axis
tool magazine
drilling units
table dimensions 220 cm x 90 cm
vakum pump
Ne3v2
control NUM 750
efficient machine, has handles cutters and documentation
the ability to check
recommend
Work table
Table size 800 x 400 mm
Toolholder DIN 69 871 ISO 40
Workspace
Traverse path X-axis 600 mm
Y-axis 400 mm
Z axis 400 mm
Work-piece weight 500 kg
Milling head, swivel R + L ± 90 °
Max torque 500 nm
Spindle speed 36-3.150 1/min
Manual adjustment Quill stroke 80 mm
Feed speed
X-axis min/max. 16 / 800 mm / min
Y-axis min/max. 16 / 800 mm / min
Z-axis min. / max. 8 / 400 mm / min
Rapid traverse x/Y/Z axle 2,000 m / min
Maximum feed force X/y axis 10,000 N
Maximum feed force Z ...
Operating voltage: 380/400 volts, power consumption: 7.5 of kW, control: cover dialog 4, edit area: X-axis 710 mm, y axis 600 mm, Z axis 445 mm, speed range, infinitely programmable 0-6,300 rpm, feed drive infinitely programmable 1-3600 mm / min, angle table 1000 x 600 mm with 8 T-slots, entspannbare hydraulic Toolholder SK 40, with cooling lubricant facility closed enclosure with sliding doors, weight approx. 3,000 kg, Space at least 2,900 x 3800 mm
Ti9pdzhed
Errors excepted!
Parts shown by hand not come.
Bwwcxc9
Ref. -No.: 10022
Brand: UNION
Type of control: CNC
Control: Heidenhain-Steuerung TNC 310
Storage location: Mülheim an der Ruhr
Country of origin: Deutschland
X-Travel: 2000 mm
Y-Travel: 1600 mm
Z-Travel: 2000 mm
Machine length: 6950 mm
Machine width: 4685 mm
Machine Height: 3885 mm
Table Height: 1050 mm
Spindle Diameter: 110 mm
Spindle Taper: ISO 50
Table Dimensions (Lengthxwidth): 1400 x 1600 mm
Faceplate speed: 5,6 - 224 RPM
Spindle Speed: 5,6 - 1120 RPM
Bnokormkne
Metric thread feeds: 1,25 -...
Machine type: 5-Axis milling machine
Manufacturer: Makino
Model: D800Z
Year of construction: 2016
Control System: Professional 6 (Fanuc 31i-B)
Movement X/Y/Z [mm]: 1.200/1.100/650
Spindle speed [rpm]: 18.000
Spindle:
Technology: Direct drive
Speed: 18.000 rpm
Power: 22 kW
Torque: 151 Nm
Taper: HSK 100
Cooling: Core and mantle cooling
Media feed through: Coolant + Air
NC swivel table:
B-Axis: 0°/-180°
C-Axis: 360°
Clamping surface: Ø 800 mm
Workpiece dimensionen: max. 1.000 x 500 mm
Load capaci...
Control Unit WinMax
Glwojk2
Spindle speed range 10.000rpm
Spindle power:
1 min - 8.9 kW
Continuous - 5.5 kW
Number of axis 5
Movement
X-Axis Movement 533 mm
Y-Axis Movement 406 mm
Z-Axis Movement 483 mm
A-axis -30/+110 degress
B-axis 360 degress
Rapid X/Y/Z - 24/24/24 m/minute
Cutting Feed Rate (all axis) - 7.6 m/minute
Workpiece weight 150 kg
Table
Outer length 762 mm
Outer width 356 mm
Tools
Slots in storage 20
Type of tool holder SK40
Chip conveyor
5-Axis simultanous machining
Coolant...
LONGITUDINAL TRAVEL: 1600 mm
TRANSVERSAL TRAVEL: 1075 mm
VERTICAL TRAVEL: 900 mm
TABLE SIZE: 1700 x 710 mm
MAX ADMITTED LOAD: 3000 Kg
SPINDLE: 4000 rpm; 11,5 kW; ISO 50 DIN
CONTROL UNIT: HEIDENHAIN 426
WEIGHT: 12400 Kg
Cxmyw8ci
ACCESSORIES: SWARF CONVEYOR; PORTABLE HANDWHEEL
PRICE: On demand
Working size: 6.000 x 1.250 mm.
1 Electrospindle 5 axis
1 Tool changer 12 positions
1 Drilling head: 12 vertical + 6 horizontal + 1 saw for grooves
Bod0tpnb0g
1 Vacuum pump 250 m3/h
Made in Italy
Technical specifications:
Working area: 3000 x 1250 mm
X-Axis travel: 3750 mm
Y-Axis travel: 1770 mm
Z-Axis travel: 330 mm
Max.Thickness of workpiece: 250 mm
Axis speeds: 1.60 - 1.25 m/min
Milling motor: 9 kW
Pressure: 6-7 bar
Voltage: 400 Vtl - 50 HZ
Dimensions:
Length: 6900 mm
Width: 3700 mm
Height: 1900 mm
Weight: 2200 Kg
More info:
Cnc milling machine with ladder 3 axles with 10-seat disc changer. Bar table with suction cups and 4 clamps ISO 30 recording, drill spindle ...
Ref. -No.: 10095
Brand: PFAUTER
Type of control: CNC
Control: Sinumerik 840 C
Storage location: Mülheim an der Ruhr
Country of origin: Deutschland
Drive power spindle: 70 kW
External toothing tip circle Ø max.: 3300 mm
Hob diameter max.: 500 mm
Swivel range milling head: 220 °
Table load max.: 40.000 kg
Additional units: Innenfräskopf
Max. Wheel Diameter: 3300 mm
Travel -X Axis: 1850 mm
Ojvv7
Travel -Z Axis: 1800 mm
We are service and sales partners of the company SMP Technik and
are pleased to present the successor model of the proven CA3 + to you.
The new cabin made optimal use of space. The space requirement has decreased by 25%, although nothing has changed in the solid mechanics. The extremely durable mechanical design makes the VC300 a long-term runner in terms of wear and accuracy.
The linear technology and measuring systems, as well as purchased components come from top brands in Germany and Japan, ...
• CNC-contouring-control by SIEMENS SINUMERIK 840 D
Hardware: NCU 573 Pentium III in 5 axis/1 spindle – 3 MB user database, 192 KB PLC – system software
memory card – NCU box for central processing unit CN – flat screen OP015
process INTEL CELERON 1.56 Hz, 512 MB ram, XP-floppy-disc 3.5” – 32 input/output
8 output 2 A – IM-R 361 – 8 analog input – 4 analog output – dynamic servo control
standard machining cycles – 3 data base increments PLC – look ahead – programmable speed-up
5D-package,...
LONGITUDINAL TRAVEL: 1200 mm
TRANSVERSAL TRAVEL: 630 mm
Nnhvj
TABLE SIZE: 2000 x 400 mm
HEAD: ISO 50 ; 1600 rpm
CONTROL UNIT: D.ELECTRON Z16
DISTANCE SPINDLE NOSE-TABLE: 600 mm
PRICE: On demand
Control CNC 432, CNC rotary table, tool changer, new TFT screen, but without tool holders.
X - axis 800 mm
Y - axis (vertical) 450 mm
Z - axis 600 mm
Tool holder ISO 40
quill stroke 80 mm
Working spindle speeds 20 - 5000 rpm.
magazine places 24
St9zbc
Connected load 26 KVA
Weight approx. 5 t
Accessories: chip conveyor, full cabin.
DMU60T , 2003 , 5 axis simultaneous
8000 spindle hours
Heidenhain control
x-: 630 mm
y-: 560 mm
z-: 560 mm
The spindle is brand new.
18,000 rpm.
25 kW
24 tools
17 bar through spindle coolant
5 axis simultaneous
Blwioklwro
Laser measurements of tools
Renishaw sample
Spindle hr 8000
Kuhlmann engraving machine in good and working condition with maintenance certificates, operating instructions and manuals for sale.
- 2 spindle cooling units 1x continuous cooler, 1x compressor cooling KKG600
- with minimum quantity cooling lubrication Lubrimat L50
- Rotation axis (4th axis)
2sbthm
- Multiple cutters
- Ball screws were renewed.
- Servo output stage was renewed
- Drive spindles and bearings were generally overhauled approx. 2017
- PC completely configured incl. driver
- incl....
CNC universal milling machine with NC table
24 tool places SK 40
electric hand wheel etc.
rpm 20 - 6300
X 600 mm
Y 400 mm
Z 500 mm
Machine is in good used condition and ready for demonstration under power.
We will be pleased to answer your inquiry if you give us your name and full company name.
Gwnmsk
We do not answer non-personalized inquiries.
Travel: 2300 x 800 x 600 mm. (X-Y-Z)
Pendulum: 925 x 800 mm
5-Achses: 780 x 800
Tilting table: 800 x 630
Controller: Heidenhain iTNC530
Motorspindel: 18.000rpm / 35 kW / 142 Nm
Toolchanger: 52 pockets / HSK63
Jvyhoa
Internal high pressure coolant: 20 Bar
Laserprobe for tool breakage control
3D Touch probe
LONGITUDINAL TRAVEL: 3000 mm
TRANSVERSAL TRAVEL: 1100 mm
VERTICAL TRAVEL: 1200 mm
Tajzzmre
RAM TRAVEL: 900 mm
TABLE SIZE: 3500 x 900 mm
HEAD: ISO 50 - DIN ; 3000 rpm
TOOL MAGAZINE: 10 POS
CONTROL UNIT: SELCA S3045D
PRICE: On demand
