5 axis cnc machining center buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: Czxiqmfs MAZAK "VARIAXIS 500-5X-II" MACHINING CENTER -- Table Size / Load Capacity 15.75" x 15.75" / 661 lbs. -- Max Workpiece Size (Diameter / Height) 19.69” x 15.94” -- X Axis Travel 20.08" -- Y Axis Travel 20.08" -- Z Axis Tr... more
6

4-axis CNC machining center Holz-Her Promaster 7123 K

Hochheim am Main, GermanyGermany dealership location
6547 km
2007
used
Gerbauchtmaschine Year of manufacture: 2007 State: Funktionsgeprüft Equipment and technical data: Console machine Processing size in x: 3.200 mm Processing size in Y: 1,470 mm Maximum height of procedures in Z: 325 mm Motor spindle: 11 kW air cooled With C axis Incl. laser pointer Gnldfilo8 Incl. ride plate tool changer with 18 courses 6 consoles including 12 vacuum cleaners Incl. manual control unit Incl. 3-field safety mats Incl. Nutsäge Horizon... more
6
x-travel 700 mm y-travel 315 mm Bbomijz7tq z-travel 172 mm w-axis 495 mm Control HEIDENHAIN TNC 407 tool taper SK 30 tool changer 32 x turning speeds 50 - 9200 U/min Capacity of spindle 5 KW rapid traverse max. 9 m/min feed power x 4800 N feed power y 4800 N feed power z 10500 N table surface area 1230 x 410 mm table load capacity 250 kp dividing head 360 Grad coolant tank 100 l Measuring probe Renishaw MP12 total power requirement 16 kW weight of the machine ca. 3,40 t dimensions of the m... more
11
Controll system: Fanuc Series oi-MD Travels: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 610 mm C-axis: -110° ~ 110° (rotary table) Table size: 1120 x 500 mm Table load: 800 kg Additional rotary table - 4th C-axis: Manufacturer: GSA + Model: CNCT - 202RB Rotary table diameter: 200 mm Centering hole diameter: 30H7 T-grooves width: 12H7 Guide block width: 18H7 Ba82enpoho The height of the tilting axis from the clamping table surface: 210 mm Height of the rotary table surface from the c... more
3
X Travel 650 mm Y Travel 450 mm Z Travel 450 mm Spindle speed 12.000 rpm Controller FANUC professional 3 Iqgt2wj more
12
5-axis machining center Manufacturer Deckel Maho Linear type DMU70V Built in 2000 Control Millplus simultaneous milling possible about 33,000 hours of power approximately 16,000 spindle hours Spindle has been renewed Glasmaßstabe of the new X-axis Bbsjujowqg Traverse paths X 2300 with partition 2 x 710 Y 530/530 mm Chuck SK40 maximum spindle speed 12.000U/min# Internal coolant supply IKZ 40 bar 2 x 30 specialist tool changer Chip conveyor right and left Workspace left 5 axis m... more
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Envpnt2 MORBIDELLI AUTHOR 600 KS CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:Working Capacity "X" Axis is 114" (2,900 mm), "Y" axis 54.5" (1,385 mm) when routing & 45" (1,145 mm) when boring, "Z" axis stroke is 11" (280 mm), max material thickness is 7" (180 mm) -- Positioning speed:"X" Axis 196 FPM (60 MPM),"Y" axis 131 FPM (40 MPM), "Z" axis 74 FPM (22.5 MPM); YASKAWA AC Servo motors in all (3) axes. -- Worktable:(6) Vacuum hold-down... more
8

CNC 5-axis machining center DMG - DECKEL MAHO DMU 65monoBlock

Gewerbestr. 9, 83530 Schnaitsee, DEGermany
6908 km
2011
excellent (used)
Used CNC 5-axis machining centre DECKEL MAHO DMU 65monoBlock control HEIDENHAIN iTNC 530 Handwheel HR 410 X 735mm Y 650mm Jnku3jyd Z 560mm CNC rotary table Ø 650 mm Integrated into 800mm x 650mm Spindle 20-18,000 rpm. 30ig professional tool changer SK 40 interface Chip conveyor Rinse-gun Bed flushing Infrared probe Signal lamp integrated in the workroom door Coolant tank more
5
New range 5 axes machining centre. Its structure is compact, powerful, versatile and easy to handle for the machining at high speed of non-ferrous materials (technical plastics, thermoformed plastics and their by-products). The machine has a strong moveable gantry that guarantees high speed working as well as a high precision and quality finishing. Dfmcnkdf Table dimensions X-2000 , Y - 1600 , Working area X-2900 , Y-2100mm , Z-1200 mm (See PDF file) HSD 9kw spindle, HSK63F tool holder ,... more
1

CNC MACHINING CENTER (5-AXIS) BIESSE ROVER A 1632

North Carolina, United StatesUnited States dealership location
518 km
2015
used
Elect./Voltage: 200-600 V, 50/60 Cy, 3Ph Gl3feciro BIESSE ROVER A 1632 CNC MACHINING CENTER (5-AXIS): -- Specifications:Working Field "X" axis 129" (3,276 mm), "Y" axis 62" (1,574 mm), "Z" axis stroke 15" (383 mm), max. material thickness 9.6" (243 mm). -- Positioning speed: "X" Axis 262 FPM (80 MPM), "Y" axis (60 MPM), "Z" axis 65 FPM (20 MPM). -- Work Table:(6) Adjustable panel supports with lifting bars for heavy panels, (4) "ATS" vacuum pods per panel support;(2) Independent working... more


5 axis cnc...
daily

New machines via email!

Stay updated!
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. 2q7dim HOMAG BOF 211 / VENTURE 12L CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:This machine is IDEAL for wood door, window & stair manufacturing: -- Working field"X" axis 204" (5,200 mm), "Y" axis 51.2" (1,300 mm), "Z" axis stroke 31.5" (800 mm), max. material thickness 11.8" (300 mm). -- Position speed:"X" & "Y" axis 197 FPM (60 MPM), "Z" axis 98 FPM (30 MPM). -- Worktable:(8) Moveable K-table support rails with side mounted raise-and-... more
1

CNC MACHINING CENTER (W/ATC, "C" AXIS) I M A BIMA 310

North Carolina, United StatesUnited States dealership location
518 km
2001
used
Elect./Voltage: 400/440 V, 50/60 Cy, 3 Ph. Bbu9pywqmj IMA BIMA 310 CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:Working Field "X" Axis is 157.4" (4,000 mm), "Y" axis is 47.2" (1,200 mm), "Z" axis stroke is 17.32" (440 mm), max material thickness 3.9" (100 mm). -- Positioning speed:"X" & "Y" axis at 197 FPM (60 MPM ), "Z" axis is 66 FPM (20 MPM);AC Brushless Servo motors with digital drive & linear guides ensure high speeds with a smooth acceleration-and-deceleration. -- Work... more
1
Elect./Voltage: 200-600 V, 50/60 Cy, 3Ph Juwrzu BIESSE ROVER 27 CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications: Working cap. "X" Axis is 135" (3,432 mm), "Y" axis is 39" (989.5 mm) for boring and 51" (1,300 mm) for routing, "Z" axis stroke is 9.8" (250 mm), max. material thickness is 6" (155 mm). -- Positioning Speed:"X" & "Y" Axis is 246 FPM (75 MPM), "Z" axis 98 FPM (30 MPM). -- Work area:(8) Adjustable panel supports, (3) adjustable vacuum pod per support; (8) pneumatic lif... more
1

CNC MACHINING CENTER (W/ATC, "C" AXIS) BUSELLATO JET CONCEPT

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Nmovoekv BUSELLATO JET CONCEPT CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:This machine is ideal for Stair, Window & Door component manufacturing. Working field: "X" axis 3,250 mm (127.9"); "Y" axis 1,345 mm (52.9") for routing & 1,458 mm (57.4) for boring; "Z" axis stroke 225 mm (8.9"), max. material thickness 180 mm (7"). -- Positioning Speed:"X" & "Y" axis 75 MPM (230 FPM); "Z" axis 30 MPM (98 FPM).The "X" axis (long axis) uses a hel... more
1
Elect./Voltage: 400/440 V, 50/60 Cy, 3 Ph. Enl8h90 MORBIDELLI AUTHOR 600 KL CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:Working Capacity "X" Axis is 144" (3,660 mm), "Y" axis 54.5" (1,385 mm) when routing & 45" (1,145 mm) when boring, "Z" axis stroke is 11" (280 mm), max material thickness is 7" (180 mm) -- Positioning speed:"X" Axis 196 FPM (60 MPM),"Y" axis 131 FPM (40 MPM), "Z" axis 74 FPM (22.5 MPM); YASKAWA AC Servo motors in all (3) axes. -- Worktable:(12) Vacuum hold... more
1
Elect./Voltage: 400/440 V, 50/60 Cy, 3 Ph. Eeejzs2 WEEKE BHC 350 CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:Work area cap "X" axis 3,250 mm (128"), "Y" axis: 1,250 mm (49"), Z-axis 100 mm (5.3"). -- Positioning Speed:"X " axis is 263 FPM (80 MPM), "Y" axis 164 FPM (50 MPM), "Z" axis 65 FPM (20 MPM). -- Worktable:(6) Movable "K-Table" support rails w/side mounted raise-and-lower panel feeding rails, (2) matrix vacuum pods per support.(6) Pneumatic backstops for large panels... more
1

CNC MACHINING CENTER (W/ATC, "C" AXIS) WEEKE BP 150

North Carolina, United StatesUnited States dealership location
518 km
1997
used
Elect./Voltage: 208-220/440 V, 60 Cy, 3 Ph. Bbxlp8cj9k WEEKE BP 150 CNC MACHININING CENTER (W/ATC, "C" AXIS): -- Specifications:Work area cap. "X" axis 127.9" (3,250 mm), "Y" axis 49.2" (1,250 mm), "Z" axis stroke 15.7' (400 mm), max material thickness 3.9" (100 mm), -- Positioning speed:"X" axis 262 FPM (80 MPM), "Y" axis 262 FPM (80 MPM), "Z" axis 66 FPM (20 MPM). -- Worktable:(8) Moveable support rails w/side mounted raise-and-lower panel feeding rails, (2) square matrix vacuum pods p... more
1

MACHINING CENTER - CNC (VERTICAL) ELDORADO M90-0027

North Carolina, United StatesUnited States dealership location
518 km
2001
used
Elect./Voltage: Bbu7wruygj ELDORADO #M90-0027 "MEGA 75" Deep Hole Gun DrillsSpecifications:Spindle Speeds, Infinite Range 1455 To 11740 RpmFeed Range, Infinitely Variable .100 To 99.9 Ipm(2) Spindle Motors Horsepower 3 Hp EachCoolant System Capacity 90 GallonsCoolant PressureTo 1500 PsiCoolant Flow RateTo 18 GpmCoolant Dimensions, L X W 75" X 32"Coolant Heigh t35"Note: This System Was Designed With Two SeperateDrills That Can Be Run Off Of One High-PressureCoolant [...] WITH:(2) M90-0027 Eldo... more
6

milling machining centers - horizontal MAZAK - CNC H630N

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1997
used
x-travel 1000 mm y-travel 800 mm z-travel 750 mm D9ocb7 spindle taper ISO 50 spindle turning speed range 22 - 4500 U/min rapid traverse 20 m/min workpiece weight 1200 kg total power requirement 30 kW weight 17000 kg range L-W-H 5100 x 3000 x 2700 mm more
1

CNC Vertical Machining centre 5-Axis Sim Deckel Maho DMU 50eVolution

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
2002
good (used)
5-Axis - simultaneous. Table size diameter Ø 500 x 380 mm. X-axis travel (column right / left movement) 500 mm. Y-axis travel (column back/forth movement) 420 mm. Z-axis travel (spindle up / down movement) 380 mm. A-axis (table tilt) travel amount/indexing 0,001° 0-180°. Ba2v9jly3a C-axis (spindle rotation) travel amount/indexing 0,001° 360.000°. Spindle taper DIN 69871A-SK 40. Max. / min. spindle speed 20-12.000 1/min. Number of tools in magazine 32 pieces. CNC Control CNC Mill... more

CNC Vertical Machining Center Sugino Corp. V8

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2013
used
Descriprion: F3ykfyz more
4
Control: OSP-U100L Traverse path x/Y/Z 700/800/700 mm Spindle speed: 50-12,000 rpm. 4. controllable axis of automatic pallet changer with rotary table Gvmhxo maximum workpiece size: 800 x 900 mm maximum table load: 800 kg Tool magazine with 60 seats Chip conveyor more
7
Deckel Maho DMC 63 V control Siemens 840 d Handwheel Siemens built in 1997 procedures X 630 mm Y 500 mm Z 500 mm spindle 20-8,000 rpm SK 40 recording tool changer 24 compartment table 800 x 500 mm Chip conveyor Ssppq0 IKZ (internal coolant supply) 20 bar Coolant tank Rinse-gun Bed flushing Spindle hours approx. 5900 The sale is carried out only to entrepreneurs in the sense of § 14 BGB No sales to private! more
1

MACHINING CENTER - CNC (VERTICAL) BROTHER TC-323

North Carolina, United StatesUnited States dealership location
518 km
1994
used
Elect./Voltage: C2ahrgr Brother TC-323 CNC Drill and Tap Machine -- X-Axis travel: 16.5" -- Y-Axis travel: 11.8" -- Z-Axis travel: 9.8" -- Table size: 19.7" x 11.8" -- Spindle taper: #30 -- Tool changer: 10 station -- Max. tool diameter: 3.14" -- Max. tool length: 7.87" -- Max. tool weight: 6.61 Lbs. -- Spindle speed: 6,000 RPM -- Rapid feed: 1181 IPM -- Tool to tool: 1.5 sec. -- Main motor: 5.5 HPEquipped with: -- Brother CNC 520 control -- Coolant pump and tank -- ... more
6

Milling Machining Centers 5 Axis WILLEMIN W 518 B

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2005
used
x-travel 630 mm y-travel 320 mm 2q08ni z-travel 500 mm U-axis 450 mm rapid traverse 40 m/min weight of the machine ca. 5,5 t dimensions of the machine ca. 4,3 x 2,4 x 2,4 m 5-axis simultaneous machining center The machine is in a very good condition and can be inspected under power in Switzerland! more
1

CNC Horizontal Machining Centre Victor Vcenter H 630

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
2000
good (used)
Table size 630 x 630 mm. Table NCRT. Bajqjlm7ug Number of pallets 2. Movement x-Axis 900 mm. y-Axis 800 mm. z-Axis 710 mm. Table indexing 0,001°. Number of tools in magazine 120 pieces. Maximum spindle speed 4.500 tr/min. Tool taper MAS BT 50. CNC Control Fanuc 18 M-C more
x-travel: 1000 mm y-travel: 1000 mm z-travel: 500 mm B-axis (table): 360 ° spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min rapid traverse X,Y: 15 m/min. Bbhfmammaz rapid traverse Z-axis: 12 m/min total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine [...]: 3,5x2,4x3,2 m 5 axis BAZ in parallel kinematic - automat... more
4
Control OSP 700M -Tool magazine with 32 seats -Tool holder SK 40 (MAS-BT) Gzugxhl8a -Internal cooling -Conveyors - traverse path x/Y/Z 760/460/450 mm more
3

CNC machining center Ixion 30 CNC - W Fraesmaschine

Altriperstrasse 31, 68199 Mannheim, DEGermany
6584 km
good (used)
3-axis machining centre IXION type 30 CNC-W control HEIDENHAIN TNC 355 traverse paths X 600 mm Y 400 mm Z 700 mm spindle 20-4,000 rpm SK 40 tool holder tool changer 12 tray table 800 mm x 400 mm Coolant system KGT of the Z axis overhaul, the machine has glass optical axes 2w2k8avz The sale is carried out only to entrepreneurs in the sense of § 14 BGB No sales to private! more
1
Elect./Voltage: Cxxktkg FEELER TV-510A Drill & Tap CenterSpecifications: -- Table size 27.6" x 15.7". -- X travels 20". -- Y travels 15.75". -- Z travels 15.75". -- Spindle speed 10,000 rpm -- Spindle taper 30 -- Spindle motor 5/7.5 -- Automatic tool changer positions 12Equipped with: -- Fanuc 0imd CNC control -- Chip conveyor and coolant tank more
2
New in 2001 CNC Heidenhain 426 Table Dimension 1.250 x 700 mm. Travels (X/Y/Z) 880/630/630 mm. C Axis in Table CONTINUOUS B Axis Turning Head -91º / +12º CONTINUOUS Rapid Traverse 30.000 mm/min Xnk8ebs Max. Working Feed 30.000 mm/min. Taper SK-40 DIN 69871 Turning Speeds 20-12000 rpm Main Motor Power 19 Kw. ATC INCLUDED Tools at ATC 32 Max. Weight Allowed on Table 800 Kg. Internal Coolant 40 Bar INCLUDED HEIDENHAIN Optical Rules INCLUDED Chip Conveyor INCLUDED Portable Hand... more
5
Pallet size 400 x 400 mm. Movement x-Axis 510 mm. y-Axis 510 mm. z-Axis 460 mm. Bcauglvkk3 Number of tools in magazine 80 pieces. Maximum spindle speed 18.000 R/min. Tool taper CAT 40. CNC control Mazatrol Matrix more
6
Excellent general condition. Use in plastic mold makers predominantly for 3D graphite carbon toolmaking and engraving. Low cutting forces, low machine load ... Travel distances x = 1200 y = 800 z = 500 Spindle speed 0 - 8000 rpm Drive power Main spindle 11 kW Feed speed 0 - 30 m / min Xuam0oqeh Table dimensions 1320 x 800mm Table load max. 2.000kg 20-way tool changer Max Wzg-Diameter 63mm / WZG Length 200mm Tool holder SK 40 3D measuring probe, model Heidenhain, type TS 220 Cooli... more
1

3-axis machining center Mazak MAZAK VQC 15-40

Schwäbisch Gmünd , GermanyGermany
6698 km
1989
ready for operation (used)
-Type: MAZAK VQC 15-40 Bccdem2nim -Year of construction: 1989 -Control: MAZATROL CAM M-2 -Clamping size: 900 x 430 mm -Operating hours: 1-shift operation -Available: now -Accessories: pallet changer, chip conveyor, tool magazine Tool 16-seat SK 40 (BT40) more
4

CNC universal machining center DMU 50T Fraesmaschine

Mannheim, GermanyGermany dealership location
6584 km
1999
good (used)
Universal machining centre DMU 50 T year 1999 3 + 2 axis portable mill Bamj8nuo7b X 500 Y400 Z 400 B-axis + 95 / - 10 ° c axis-360 / + 360 ° 20 9000U/min stepless spindle speed 9KW at 100% ED 13KW 40% ED Bamj8nuo7b Feed speed up to 10 000 mm/min stepless Toolholder SK 40 DIN 69871 16 x tool changer Tool changer brings error message when you press! "WZ changer out of basic position" Without Vice Control HEIDENHAIN TNC 426 are sold only to Gewerbetreibene in the sense of § 14B... more
1
Elect./Voltage: 230 V, 60 Cy, 1 Ph. C0nff8p BROTHER TC-32A CNC Drill/Tap CenterSpecifications: -- X axis travel 17.71". -- Y axis travel 12.59". -- Z axis travel 16.14". -- Distance from table to spindle 7.87"-24.01". -- Table size 21.65"x13.77". -- Max load weight 176 lbs. -- Spindle speeds 12-12,000 rpm. -- Spindle taper hska40. -- Spindle drive 7.5 hp/5 hp. -- Rapid traverse 1968 ipm. -- Cutting feed 787 ipm. -- Machine dimensions (approx) 130"x70"x93"h. -- Machine weight (app... more
2
CNC vertical machining center Wemas ft 1000 HEIDENHAIN 426 Year of construction: 1998 Technical data Procedures: X - axis 1000 mm Y - axis 500 mm Z - axis 600 mm Work spindle SK 40 Facilities: Electronic Handwheel Coolant system Rinse-gun Table size: 1080 x 580 mm Spindle retainer: ISO 40 Speed range - continuous: 20-8,000 rpm Rapid traverse 20 m / min Gysd8x32u Distance spindle/table MAX 100-608 mm Tool magazine capacity: 20 Spindle: 11/16.5 kW Total power: 30 kV... more
5
Encojnz Pallet size 400 x 400 mm. Movement x-Axis 510 mm. y-Axis 510 mm. z-Axis 460 mm. Number of tools in magazine 40 pieces. Maximum spindle speed 35-12.000 R/min. Tool taper MAS BT 40. CNC control Mazatrol PC-Fusion CNC 640 5x more
5
5-axis x trail 800 mm y-way 600 mm z path 700 mm RPM - spindle 20 - min 8000 / -1 Transmission levels 2 Control mill plus Drive power - main spindle 16 / 13 (40% / 100%) kW Milling head Max torque 500 nm Milling head - swiveling H / V Toolholder SK 40 Tool magazine with 60 seats Fh3yczl Rotary table diameter 800 mm maximum table load 800 kg Power consumption 55 kVA Machine weight approx. 8.3 t more
10
Mikron machining centre CNC milling machine model: VCE 1000 Year: 1993 Controls: Haas Go2n380je Tool holder: SK40 Tool changers: 20 x Table size: 457 x 1220 mm workpiece weight: 1575 kg Procedures: X = 1016 mm; Y = 508 mm; Z = 635 mm Spindle speed: 10-7500 RPM Rapid traverse: 7600 mm / min power: 11KW Machine size: (Lxwxh) 4000x2400x2800mm Weight: 6000kg more
2
5 - axis synchronized machining center Brand: DMG DMU 50 evolution Control: HEIDENHAIN iTNC 530 Year of construction: 2005 Spindle hours: 17.800 h (Exchange at ca 17, 600 h) Haupspindel has been replaced 03/2018. Ptohwe Technical data Traverse path x/Y/Z axes: 500 / 420 / 380 [mm] Rapid traverse (x/Y/Z): 80 / 50 / 50 [m/min] Maximum spindle speed: 18,000 rpm Tool holder: SK 40 Tool Magazine: 30 positions NC rotary table C-axis: 360 °, 33 RPM B-axis: 180 °, 26 U/min Pos... more
1

MACHINING CENTER - CNC (VERTICAL) BROTHER TC-323

North Carolina, United StatesUnited States dealership location
518 km
1994
used
Elect./Voltage: 230 V, 50/60 Cy, 3 Ph C0wwlsq Brother TC-323 CNC Drill and Tap Machine -- X-Axis travel: 16.5" -- Y-Axis travel: 11.8" -- Z-Axis travel: 9.8" -- Table size: 19.7" x 11.8" -- Spindle taper: 30 -- Tool changer: 10 station -- Spindle speed: 6,000 RPM -- Rapid feed: 1,181 IPM -- Tool to tool: 1.5 Sec. -- Max. tool diameter: 3.14" -- Max. tool length: 7.87" -- Max. tool weight: 6.61 Lbs. -- Main motor: 5.5 HPEquipped with: -- Brother CNC 520 control -- Coola... more
2
Working length between the attacks in X = 2600 mm, Y = 1000 mm, spindle 6 KW. 6-way pick up tool changer, 3-field safety floor mat, handheld, Fqfg8k9d Laser pointer, Nutsaege in X direction, 6 consoles with 2 vacuum suckers, drill head with 13 vertical spindles, horizontal double-spindle, TwinCam control,. Control Panel left, vacuum pump 100 m³, calculator new more
5
Eboqoas Pallet size 400 x 400 mm. Movement x-Axis 510 mm. y-Axis 510 mm. z-Axis 460 mm. Number of tools in magazine 40 pieces. Maximum spindle speed 35-12.000 R/min. Tool taper MAS BT 40. CNC control Mazatrol PC-Fusion CNC 640 5x more
13

CNC vertical machining center Matsuura MC 500 V

Gießen, GermanyGermany dealership location
6540 km
1981
good (used)
For sale comes from a reversal of the operation: 1 x MATSUURA MC-500V CNC vertical machining center with YANAC 3000 control unchecked - requirement to submit Scope of delivery: 1 x MATSUURA MC500V with YANAC 3000 control comprehensive operating instructions Technical data: Year of construction: 1981 16 x tool changer Procedures: X axis: 510 mm Y-axis: 330 mm Z-axis: 460 mm Table Lxw: 920 x 320 mm Fk279rv Table load: 250 kg spindle: Tool holder: BT35 Speed range: 90-... more
13
Mori Seiki, horizontal machining center with Vorbereiteung on a spindle coolant. Bbx9nnfl8f Model: SH 403 BJ: 2000 x travel: 560 mm y travel: 510 mm z travel: 510 mm Control: Fanuc MSG 501 FANUC 18i spindle speed range: 12000 RPM Spindle motor: 22 kW Total power consumption: 56 KW Rapid traverse x/y/z: 42 m / min Pallet size: 2 x 400 x 400 mm Table load: 0.3 t b-axis: 0.001 ° 90° time: 2.0 sec Maximum processing diameter: 580 mm maximum workpiece weight: 500 kg maxim... more
4
CNC vertical machining center DMC 104 V linear Simens Sinumerik 810 D Year of construction: 2006 Technical data Procedures: X - axis 1040 mm Y - axis 600 mm Z - axis 500 mm Work spindle SK 40 Speed range 20-12,000 rpm AC main drive (40 / 100% ED) 28/19 kW Max torque (40 / 100% ED) 100/70 nm Table: Dimension table 1250 x 600 mm Maximum loading 800 kg Tool changer: 30-fach Zi8jjh0 Facilities: Electronic Handwheel Coolant system Rinse-gun Chip conveyor Space requi... more
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Bbu7t20fsa HAAS MDC-1 CNC Drilling & Tapping -- Haas 32 32 Bit Control. -- X-Axis travels 20". -- Y-Axis travels 16". -- Z-Axis travels 15.5". -- Spindle motor 15 HP. -- Spindle speed 10,000 RPM. -- Dual pallet. -- Automatic tool changer positions 24. -- Table size 15" x 26". -- Spindle taper 40. -- Under 7000 spindle hours. more
5
CNC machining center of Hedelius BC 40 d year: 1997 traverse paths: X axis: 1700 / Y axis: 400 / Z axis: 400 main spindle speed: 0-8000 RPM main spindle 16,25KW Max torque 102NM tool changer 20fold control Brack et Siemens 840 d tool holder: SK40 IKZ (internal coolant supply) 4 axis MECA weight approx. 5000 kg are sold only to entrepreneurs in the sense of § 14 BGB no sale to private! 7epmrnmmm more
5
Pallet size 400 x 400 mm. Simultaneous operated axes 4+1. Movement x-Axis 350 mm. y-Axis 550 mm. z-Axis 510 mm. Number of tools in magazine 18 pieces. Maximum spindle speed 12.000 R/min. Tool taper MAS BT 40. CNC control Mazatrol NEXUS-II Bcatag80g3 more


5 axis cnc...
daily

New machines via email!

Stay updated!

to

to

Edit search
5 AXIS CNC MACHINING CENTER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close