Used Additional Equipment for sale (53,923)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 818745 / (PPS 2013- 001), This machine was updated in 2013 with a two-hand safety system. It is a semi-automatic machine that prints labels and presents them in a fixed position. The operator places the box in the fixture and presses the OK button with both hands for safety. Afterward, the label will be applied. The unit consists of an Allen printer 53XL80 and a table-top version – Herma 414 from 2011. The table height can be adjusted by pressing a button. The control system is integrated into the HERMA 400 labeler. Machine capabilities: Labeling of cartons. Output: max. 30 pcs./min. Size – Cartons (55 x 30 mm and 95 x 120 mm). Label specifications: Label size: 70 x 20 mm, 100 x 70 mm, 100 x 45 mm, 140 x 25 mm. Bdodpfxozx D I To Al Usg Label specifications: K: Core diameter 76 mm R: Reel diameter max. 300 mm B: Label width max. 160 mm L: Label length max. 800 mm Label winding outside.

Condition: good (used), Year of construction: 2024, Labeling machine, Novexx – used: Price at location: €1,950.00 (net), including loading! Additional Novexx solution thermal ribbon Avery Novexx 64-04 A2817: €425.00 (net) per piece. Manufacturer: Novexx Year of manufacture: 2024 Type: A2817 Serial number: CLG22X-00063 R = 1348 Ohm PRINT PARAMETERS Print speed: 8.0 inches/s Bdedpfx Alezxcdte Uog Feed speed: 8.0 inches/s Material type: Die-cut Material length: 143.0 mm Material width: 99.0 mm Print orientation: Front first Die-cut offset: 0.0 mm Barcode multiple: *1 UPC clear text: Bottom EAN clear text: Standard EAN separators: Only with clear text Rotated barcodes: Optimized Dispense mode: True 1:1 mode Dispense position: -5.0 mm X print offset: 2.4 mm Y print offset: 1.0 mm Die-cut mode: Automatic Die-cut threshold: 128 Condition: good Available: immediately Location: Erfurt area, later Frankenberg / Saxony warehouse

Condition: new, operation weight: 355 kg, Year of construction: 2024, Bucher Polyx RC28 with neoprene edge strip (clearing width at 30°: 2470 mm) Year of manufacture: 2024 Equipment: - Single-blade snowplow in robust lightweight construction, blade made of polyethylene - Powder-coated plow frame made of steel - HD lifting and lowering device Bdjdpfxjxxyv Ho Al Ujg - HD pivoting device with two hydraulic cylinders - Hydraulic hoses complete with hydraulic couplings - Pivoting damping valve - Snow dust protection - Patented neoprene edge strip (RC version) - Plow contour lights, LED - Support stand - Mounting plate (plow side) - Mounting hook, size 3 - Curb deflector - Boundary flags and warning marking Offer subject to change. Errors, modifications, and prior sale reserved. All information without guarantee. Our general terms and conditions apply. Location: Peter Meineke Becklinger Str. 17 29683 Bad Fallingbostel-Dorfmark Inspections and/or test drives only by prior appointment. Please coordinate by phone before arrival, as the vehicle/machine may not be at the specified location. Contact: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Condition: refurbished (used), operating hours: 50 h, functionality: fully functional, ASCO C500 dry ice pelletizer, completely overhauled, including the electric motor. The most reliable industrial dry ice pelletizer without complex electronics. Bodpfx Alezqu Twj Ujdg The ASCO C500 is globally recognized as one of the most powerful and reliable dry ice pelletizers ever built by ASCO. Thanks to its simple and robust technology, this machine operates largely without complicated electronics. This minimizes malfunctions and makes maintenance and repairs easy to perform. The machine has been recently serviced, is in good condition, and is ready for immediate use. Technical specifications: Brand: ASCO Type: C500 Production capacity: up to 180 kg of dry ice per hour Standard pellet size: 3 mm Other sizes available at an additional cost: • 1.7 mm • 10 mm • 16 mm Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: refurbished (used), Year of construction: 2015, operating hours: 33,630 h, ASCO A120P Dry Ice Pelletizer – Refurbished We have various new parts in stock for Cold Jet machines. A robust and reliable industrial dry ice machine, suitable for the production of high-quality dry ice pellets for cleaning, cooling, and transport. Specifications Brand: ASCO Type: A120P Operating hours: 33,630 hours Ready for immediate use Major maintenance performed (2024) The machine underwent extensive maintenance by ASCO Germany in late 2024. During this process, several critical wear parts were replaced, and the press unit was refurbished. Among the parts replaced: ✔ New press chamber kit ✔ New piston ✔ New guide bushings ✔ New sintered bushing ✔ New hydraulic filter ✔ New solenoid valves ✔ New pressure regulator (latest version) ✔ Hydraulic valve replaced ✔ Various springs ✔ New seals ✔ Various fasteners Service documentation available Bdsdpfx Alszquixs Ujg The machine comes with the original documents, including: Original ASCO service report Test results after maintenance This confirms that extensive refurbishment work was carried out on the press chamber and hydraulic components. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine to buy, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: new, mileage: 98,500 km, power: 390 kW (530.25 HP), first registration: 09/2024, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, retarder, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - High beam headlights Bdedpfx Aozvc A Dol Uog - Alloy wheels - Air suspension - Particle filter - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Auxiliary heater - Xenon headlights = Notes = Scania T530R Tuft R Torpedo – New – Full specification – BUFFL interior and exterior – Show truck Year of manufacture: 16-9-2024 Mileage: 1,500 km YS2R4X20005737359 TUFT Torpedo based on R cabin New Full factory specification BUFFL interior and exterior Contact us for all information = Additional Information = Technical Information Number of cylinders: 8 GVWR: 20,000 kg Transmission Transmission: Opti Cruise, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Alloy wheels; Max. axle load: 9000 kg; Steerable; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle: Dual tires; Alloy wheels; Max. axle load: 13000 kg; Tire tread depth left (inside): 100%; Tire tread depth left (outside): 100%; Tire tread depth right (inside): 100%; Tire tread depth right (outside): 100% Functional Body manufacturer: Scania Condition Overall condition: very good Technical condition: very good Optical condition: very good

Year of construction: 1992, operating hours: 1 h, condition: used, Transmission: Automatic Empty weight: 5.000 kg Please contact Emal Jaweed for more information Bsdozxc Thopfx Al Uedg

Condition: good (used), Rochman SVA6035 Sleeve wrapper with shrink tunnel Rochman shrink wrapper, 600mm sealing bar, adjustable temperature and speed controls, once sealed feeds into SMIPack T650EF shrink tunnel, max product height 300mm, 3Ph Bdsdpfx Aljx H Tgqo Uog

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Used impact mill for the production of crushed stone and graded aggregate, feed size 20-100 mm, capacity approx. 40 m³/h. Bjdpozwt Uasfx Al Uedg

Year of construction: 1997, condition: used, Various metalworking machines are available as a package. 1) Sigg TR 60 glass bead blasting machine, year of manufacture: 1997, max. operating pressure: 8bar, with fan and compressor receiver unit. 2) Rema DP 07 grinding/polishing machine, motor power: 0.22kW/0.37kW, voltage: 380V. 3) Double-ended grinding machine. 4) Weiler lathe. An on-site inspection is possible. Bodpfx Alezxr R No Ujdg

Condition: ready for operation (used), functionality: fully functional, overall weight: 9,000 kg, Used impact crusher, Kleemann SDR 1000 x 230 mm, capacity 20 - 70 t/h, final grain size approx. 0/25 mm, maximum feed size 200 mm, weight approx. 9 tons. The crusher can be easily rotated by hand. Immediately available, subject to prior sale. Bdodpfx Aezhn Hxel Uog

Condition: used, mileage: 1 km, power: 18 kW (24.47 HP), gearing type: other, fuel type: diesel, color: grey, overall weight: 3,400 kg, empty load weight: 3,400 kg, first registration: 05/2025, emission class: none, suspension: other, Year of construction: 2025, operating hours: 6 h, total length: 4,600 mm, driver cabin: other, construction height: 2,000 mm, fuel: diesel, - Available from summer 2025 in Bad Salzuflen - Net price: EUR 64,900 - Compact, mobile jaw crusher, 3400 kg operating weight, with rubber tracks - One-person operation via remote control - Radio remote control Bdodpjzv Nq Isfx Al Uog - Material hopper 0.6 m / 3 (dimensions: L 4.6 m x W 1.50 m, L 2.0 m = loading height 1.9 m) - Transport dimensions: L 3.0 m x W 1.50 m x H 2.2 m - 500 mm x 300 mm jaw crusher - Water spray nozzles for dust reduction - 3400 kg operating weight - Output up to 10 to 30 tons per hour, depending on the material - Consumption approx. 3-5 L/h - Grain size 25 mm to 80 mm, hydraulically adjustable via remote control - All essential functions can be controlled with the radio remote control (spare battery with quick charger) - Subject to errors and prior sale! ... VAT can be shown separately, demonstration model, diesel engine, very good condition.

Condition: used, mileage: 1 km, power: 55 kW (74.78 HP), gearing type: other, fuel type: diesel, color: grey, overall weight: 12,000 kg, empty load weight: 12,000 kg, first registration: 05/2025, emission class: none, suspension: other, Year of construction: 2025, operating hours: 8 h, driver cabin: other, construction height: 2,670 mm, fuel: diesel, load capacity: 12,000 kg, - Current delivery time is approximately 4 months. - Net price: EUR 139,000 plus 19% VAT. - Inspection possible at any time by arrangement, near Bielefeld. Bodpjzv Nq Ujfx Al Uedg - Location: Bad Salzuflen. - Compact, mobile jaw crusher; an improved, updated version of the Bison 120. - Single-person operation is possible via remote control, depending on the material; supervision or an operator may be required for dismantling. - Radio remote control and on-site operation! - Material hopper: 2.3 m / 3 (dimensions: L 2.4 m x W 1.56 m, loading height: 2.69 m) - Preliminary screening with a grizzly screen. - 680 mm x 400 mm jaw crusher. - Ideally filled with a 1 m³/3 bucket and an 8 to 15-ton excavator. - Magnetic belt. - Water spray nozzles for dust reduction. - Steel chain with rubber pads. - Self-weight: 12 tons. - Transport dimensions: L 5.50 m x W 2.20 m x H 2.67 m; the height can be reduced by folding down the hopper and platform to match sea container dimensions! - Output up to 50 to 80 tons per hour, depending on the material. - Fuel consumption: approximately 14 liters/hour. - Grain size: 20 mm to 80 mm, hydraulically adjustable. - Very good access to the engine/hydraulics, etc. (rear and side flaps open 90° and provide full access for maintenance work). - All essential functions can be controlled with the radio remote control (spare battery with quick charger). - Subject to errors and prior sale! - ... VAT can be shown separately, demonstration model, diesel, very good condition.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension +100 km/h, ramp, aluminum floor Equipment: - 10x lashing eyes - Aluminum floor - Tailgate - Loading angle 20° Net: €7,703.36 / Gross: €9,167.00 Article number: ILF335401791.12 Technical data: • Brand: Hapert Trailers • Model: Indigo LF-3 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 405 x 179 x 19 cm • External dimensions (LxWxH): 589 x 238 x 145 cm • Loading height of the floor: 42 cm • Perm. gross vehicle weight: 3,500 kg • Unladen weight: 1,101 kg • Payload: 2,399 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic • 100km/h approval: Yes DESCRIPTION • 3x parabolic axle, each 1,800 kg • Robust steel mudguards, walkable • 4x HAPERT Safety Steps (anti-slip surface) • Grid grating step plates on the rear side • Aluminum profile floor • Very stable steel frame, welded • Frame completely hot-dip galvanized • 1x continuous tailgate, 150 cm long, mounted on a shaft, instead of a 120 cm ramp • Length of tailgate: 150 cm • Loading angle: 13° • Stable eccentric locks • Corner posts with closures for the rear door, removable without tools • Insertion option on all 4 corners for tarpaulin frames, grid attachments, side extensions or front panel extension • Robust support legs on the tailgate • Lifting aid for the tailgate • Very low chassis for low loading angle • Optionally with bucket rest • 10x lashing eye recessed in the frame profile (1000dAN/kg), TÜV certified • Hole rail on three sides, 6cm (Combi Protect Rail), also usable with locking rods and lashing straps - round holes 25mm, oblong holes 54x25mm • Parabolic axle from KNOTT Bjdpezu N Nzofx Al Ujdg • Reversing automatic • KNOTT overrun device and parking brake • Very stable, bolted V-drawbar, REINFORCED • 13-pin plug • Reversing lights • Large-format safety lighting • Rear position lights • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel, centered _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request customizations! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - dealers & repair workshops for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, mileage: 543,681 km, power: 90 kW (122.37 HP), first registration: 06/1997, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 10/2021, color: orange, gearing type: mechanical, number of seats: 2, total width: 2,370 mm, total height: 3,260 mm, Equipment: parking heater, * Rear view camera * Rotating beacon * 5-speed manual transmission * Leaf suspension ----* Honda R.V. generator with 7,534 operating hours * Office with PC & control units * Schäfer Kommunaltechnik Drain Jet 100, year 1997 * 2 jetting heads * Jetting pump & hoses ----* Tire size: 225/75R17.5 * Overall length: 7,000 mm ----- Subject to errors and prior sale, vehicle number 5711 Bedpfovhv Ibox Al Uodg WhatsApp support available! If you have questions about the vehicle or need more information, feel free to message us via WhatsApp Whatsapp Whatsapp

Condition: good (used), machine/vehicle number: 3495, total length: 7,900 mm, total width: 2,810 mm, Year of construction: 2010, operation weight: 8,200 kg, load capacity: 120,000 kg, Novatech NOVATECH RT20-120T from Uniktruck Bdodpfozvzh Eox Al Uog

Condition: good (used), machine/vehicle number: 3494, total length: 7,900 mm, total width: 2,810 mm, Year of construction: 2009, operation weight: 8,200 kg, load capacity: 120,000 kg, Novatech NOVATECH RT20-120T from Uniktruck Bdodpfx Alozvzhxj Ujg

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Walkable fender - Ramp - Low loading platform Net price: €4,453.78 / Gross price: €5,300.00 Article number: VTM335401800.01 Technical data: • Brand: Vlemmix • Model: VTM • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 400 x 180 x 34 cm • External dimensions (L x W x H): 582 x 240 x 167 cm • Loading height of the floor: 35 cm • Permissible total weight: 3,500 kg • Unladen weight: 840 kg • Payload: 2,660 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: No DESCRIPTION • Continuous steel fender, walkable • Very stable steel frame, welded • Water-resistant, glued 18mm thick screen-printed floor • Loading platform height only approx. 35cm • Maintenance-free rubber spring axles from KNOTT • KNOTT inertia braking system and parking brake • Reversing aid automatic • Very low chassis for a low loading angle • V-drawbar with support for the excavator bucket • Excavator bucket storage with lashing eyes • Sturdy steel side walls, approx. 34cm high • Galvanized chassis • Torsionally rigid longitudinal member chassis for safe driving characteristics • Solid loading ramp, approx. 132cm long, with gas spring support • Stable rear support integrated in the loading ramp (automatic support when the ramp is opened) • 10x lashing eyes on the side, with ring eyes • Lighting recessed in the rear frame • Marker lights in the front • Automatic support wheel with holder in the middle • 13-pin connector • Reversing lights • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! Bjdezupxpepfx Al Uodg We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 500 kg, temperature: 250 °C, heating capacity: 105 kW (142.76 HP), air demand: 7,000 m³/h, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, Equipment: lighting, Compact powder coating system (complete system) – booth, curing oven, conveying system & Gema technology Complete system for manual powder coating of parts up to 3,000 mm in length and 500 kg payload per carrier. First-class brand-name components (Gema, Siemens, Schneider Electric, Donaldson, Riello), including installation, commissioning and operator training. Overview & Concept For sale is a brand-new, manual powder coating complete system for workpieces up to 3.0 m in length. The system combines an efficient extraction coating booth, a powerful gas curing oven, and a flexible rail conveying system including steel structure (individual design/planning of a powder coating system possible upon request!). 1. Powder coating booth (double-sided manual coating) - External dimensions (L x W x H): 3,400 x 1,100 x 2,150 [mm] - Workpiece opening dimensions: 500 x 1,600 [mm] - Extraction & filter: 2x radial fans at 4,500 m³/h (ATEX version, 3 kW each); 2 filter units with a total of 6 antistatic Teflon filters (Donaldson, 325 x 660 [mm]) - Cleaning: Automatic/manual compressed air pulse cleaning (6 valves) - Safety/equipment: ATEX-compliant internal lighting, sound insulation in the fan area, control via Siemens/Schneider wall control cabinet Electrostatic powder coating technology (Gema) (other manufacturers can also be supplied upon request) - 2x hand guns: Gema OptiSelect Pro with PowerBoost® technology, ATEX-certified - 2x control units: Gema OptiStar 4.0 CG20 with DVC and PCC precision current control, 250 memory programs, app connectivity - 2x injectors: Gema OptiFlow IG07 with quick-release & non-stick cartridge Convection curing oven (chamber oven with double door) - Internal dimensions (L x W x H): 3,500 x 2,000 x 2,300 [mm] - Max. temperature / operating temperature: up to 250°C / 180 - 200°C - Heating: Indirect thermo block with Riello/Ecoflam burner (approx. 105 kW (90,000 kcal/h)) - Fuel: Natural gas or liquefied gas (LPG) (other energy supply e.g. electricity possible upon request) Bdjdpfxozu Imrj Al Usg - Recirculation: 2 x 3,500 m³/h recirculation fans (plus automatic fan exhaust fan) - Insulation: 150mm rock wool insulation Manual conveying system including steel structure Load capacity: Max. 500 kg per carrier Equipment: 5 oven rails, 15 carriers (3m each), 3 transverse transfer trolleys Running trolleys: Equipped with high-temperature resistant bearings Scope of supply & services / Commercial points Included in the price: - Booth with extraction & filter unit - 2x Gema powder coating units - Curing oven including thermo block & burner - Conveying system including steel structure & trolleys - Installation, commissioning & operator training on site

Condition: good (used), machine/vehicle number: 19234, Year of construction: 2022, Seacom KOBLINGS-KIT from Uniktruck Bdsdpfx Alozu Thzj Uog

Condition: good (used), machine/vehicle number: 19233, Year of construction: 2022, Seacom KOBLINGS-KIT from Uniktruck Bdedpfx Alszu Thns Uog

Condition: good (used), machine/vehicle number: 19232, Year of construction: 2022, Seacom KOBLINGS-KIT from Uniktruck Bdjdpfxozu Thhj Al Uog

Condition: good (used), machine/vehicle number: 19231, Year of construction: 2022, Seacom KOBLINGS-KIT from Uniktruck Bdodpfxezu Thbo Al Ueg

Condition: good (used), machine/vehicle number: 19230, Year of construction: 2022, Seacom KOBLINGS-KIT from Uniktruck Bdjdpfx Aezu Tg Rol Uog

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Bdsdpfx Aleyhd Dbj Ueg Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.