Used Aks 202 for sale (2,297)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Isdswu D Unjpfx Addstb Type: canopy set; weather-protected, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Itsdpfxjwu Dbus Addob Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: diesel, tank capacity: 700 l, color: beige, power: 322.15 kW (438.00 HP), output current: 591 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 328 kW (445.96 HP), nominal power (apparent): 410 kVA, continuous power: 269 kW (365.74 HP), continuous power (apparent): 370 kVA, total length: 4,463 mm, total width: 1,606 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator DW 370 DO2 15 AK14A PRP power: 296 kW / 370 kVA ESP power: 328 kW / 410 kVA Engine: Doosan P158LE-1 Emission stage: 2 Iedpfx Adowu Ectodjtb Speed: 1,500 rpm electronic speed governor Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40 1S/4 Voltage: 400 V Voltage regulator: DSR1 Control panel: DSE 7320 Battery charger: 5 ampere Type: Canopied unit; weatherproof, soundproofed • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (700 L) and vibration dampers • Voltage and frequency regulation according to ISO 8528-5 • Unit suitable for stationary operation only Please note that these units are not approved for mobile use in accordance with current EU regulations. The units are sold as B-grade goods. B-grade means the units may have visual imperfections such as flash rust or rust on the housing. These do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and corresponding condition of the units.

Condition: used, machine/vehicle number: XLT0000000W012685, axle configuration: 2 axles, first registration: 10/1997, loading space length: 13,200 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, total width: 2,500 mm, suspension: air, wheelbase: 8,940 mm, color: other, Year of construction: 1997, Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Empty weight: 11.780 kg Itedpfjya Hb Hex Addsb Carrying capacity: 20.220 kg GVW: 32.000 kg Registration number: OF-01-HS

Condition: good (used), diamond core drilling machine -Drill stand -vacuum pump -Core drill: Ø 202 mm (picture) -Machine dimensions: 500 x 370 x H1070 mm Ijdpedpvwwofx Addetb -Weight: 53 kg

Condition: used, Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Plate: is scraped -Width: 202 mm -Length: 300 mm -Height: 65 mm Isdpfx Adjdfb Itjdstb -Plate thickness: 12 mm -Plate: is with supporting ribs -Number: 10x plates available -Price: per piece -Dimensions: 515/202/H63 mm -Weight: 7 kg/piece

Condition: good (used), Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box Itedjb T Ti Hepfx Addeb -Material: Steel -Dimensions: 245/202/H130 mm -Wall thickness: mm -Weight: 28 kg

Condition: used, Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outside/Inside: Ø 300/202 mm -Height: 20 mm -Hole circle: Ø 250/10 mm Itodpfsghic Isx Addeb -Delivery of: steel/stainless steel cover plates possible -Number: 71x pillows available -Price: per piece -Weight: 1 kg/piece

Condition: used, Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaw: 200 mm -Hole spacing: 140 mm/Ø 10 mm Iodjfgwv Sopfx Addstb -Dimensions: 202/18/H75 mm -Weight: 2.1 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 60 mm -Piston rod: Ø 25 mm -Diameter eyes: 22 mm -Stroke: 202 mm -Dimensions: 455/83/H95 mm -Weight: 8 kg Itsdpfx Aed Evuyjddjb

Condition: as good as new (ex-display), This is an entry ramp for oven trolleys of the combi steamers type 202 from Rational. This ramp fits all combi steamers from the Index E. to Index I. series. With this ramp, slopes (up to 3%) in the kitchen floor can be compensated. This ensures that the rack trolley enters the Rational appliance without any jolts. The indicated price is net plus 19% VAT. Iedpfx Aemf Ti Teddotb Our service for you: -High-quality brand equipment at fair prices -Professional overhaul / inspection & professional cleaning -tested & fully functional - or money back -Dispatch or self-collection flexibly selectable -Competent advice - before and after purchase -provision of operating instructions, connection diagrams & spare parts -Inspection according to DGUV V3 seal -Article number: 60.22.181 Condition: Used Dispatch / Shipping: -Delivery or pickup by arrangement. -Worldwide shipping on request / Worldwide shipping on request -Shipping to islands or mountain stations only after consultation You have questions, wish a consultation or would like to look at something on site ? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale takes place exclusively to our general trading conditions (AGB)

Condition: used, material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm Weight 0,40 t required space 0,9 x 0,8 x 0,7 m mechanical roll feed drive via main shaft / pivot shaft of the press - pivot shaft / mounting plate not included max. no. of strokes approx. 1500 / min Itedpfovuuntjx Addjb as is where is, WITHOUT putting into operation, in given condition

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C3.00202.1212, total width: 1,000 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,740 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 254 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 202 mounted on a base frame. Similar but not Kamat, Uraca, or Woma. Iodpfeyacaxsx Addetb Pump type: HDP 202 Operating pressure: 340 bar Flow rate: 254 l/min Drive speed: 1500 rpm Drive power: 157 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x1000x1450 mm Weight: approx. 1740 kg Year of manufacture: 2023 Condition: In January 2026 new piston seals were installed and valves checked. In very good used condition.

Condition: used, mileage: 202,430 km, power: 390 kW (530.25 HP), first registration: 11/2019, fuel type: diesel, empty load weight: 14,340 kg, maximum load weight: 17,660 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 4,550 mm, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, compressed air brake, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * 1st owner * Only 202,430 km original mileage * Condition as shown in photos * Palfinger articulated sliding hooklift body * Model: T20A * Pulling force: 26 tons * Cable remote control * Suitable for all containers up to 7 meters * Underride guard hydraulically adjustable * Tow hitch Itodpfex Szdnjx Addeb * Permissible trailer load: 35,000 kg * Gross combination weight: 44,000 kg – technically possible up to 60,000 kg * Rear hydraulics, electrical and air connections & Duo-Matic * M-cab ClassicSpace * Air conditioning * Refrigerator * Engine brake * Automatic transmission * Multifunction steering wheel * Hill-start assist * Rear-view camera * Air horn * Roof hatch * Comfort driver's seat, air-suspended * Beacon * Heated seat * EBS * Electric windows * Heated electric mirrors * Radio * CB radio * Differential lock * Work lights * ABS/ASR/ESP * Air suspension * Wheelbase: 4,550 mm * Gross vehicle weight: 32,000 kg * Curb weight: 14,340 kg * Payload: 17,660 kg Should you require a new TÜV inspection, we would be happy to provide you with an offer from one of our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV check, without a new SP, and without a new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability by the buyer. Viewing and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale, and errors reserved.

Condition: good (used), functionality: fully functional, 1 - Urban AKS 3610 Head Welding Machine Itedsx Ur Rdopfx Addjb - Weld bead limitation: 0.2 mm - Upper Nirosta blade, heated - Lower Nirosta blade, heated - Angle adjustable from 30° to 180° - Set of support arms

Condition: used, Year of construction: 1997, Technical details: content: 500 cbm capacity in bar: 11 operating pressure: 11 bar weight of the machine ca.: 0,23 t dimensions L x W x H: Ø 620 mm x 1800 mm Pressure tank Pressure vessel according to directive 87/404/EEC Mark of conformity TÜV NORD 2017 Stands on base frame = steel profile frame welded. Connecting pieces: 1/2" with locking valve; 1/2" with plug; 1" with manometer; 1" with plug Connecting piece 2x left/right 1" with hose connection Temperature range min./max.: -10°C / +50°C Isdpfsu Nz S Eox Addotb Equipment: Ceiling support pressure hose (inside Ø 20mm) length 4m Pressure reducer with adjustable double connection *

Condition: used, Year of construction: 1994, Technical details: tank capacity: 150 l operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg For sale as shown and described, as an unpressurised tank for a sale at low price. Condensation drain valve at the bottom with hand lever 2 connection pieces 1/2 inch 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C Iedpju Nz Tiefx Addjtb pressure gauge *

Condition: like new (used), We hereby offer this pressure reducer for sale Item No.: RS3602021018 5 units available in as-new condition. Price for all: €750. Ijdjx Ekruspfx Addotb Operating manual included Shipping possible No returns or warranty

Condition: ready for operation (used), No. FC 200 202 885 control board SN:76551 + FC 200 202 889 option card, used, minor signs of wear, 100% functional, scope of delivery as per photos Itedpfx Aex Et Ryoddsb

Year of construction: 1996, condition: good (used), - Output: 15 -30 To/h - With mechanical variator - Motor for cylinder + spiked roller: 7.5kW 400V 50Hz - With integrated grape crusher AQ 30 - Grape crusher: 2.2kW - Plastic destemming cylinder - Without electrical equipment - Machine in good condition Dimensions: - Length: 2840mm Ijdpfx Asmn I Nbeddjtb - Width: 1040mm - Height: 1130mm

Condition: new, Bosch DSM 04 A 2101-D No. 1070075000-202, SN:001299670, unused in opened original packaging, 100% functional, scope of delivery as per photos Isdpoi D T Uisfx Addstb

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S / 202 / 3531139-6 servo motor, 1070914867, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please enquire about price separately! ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Isdpfx Adek Ru A Uodetb

Condition: ready for operation (used), Bosch DSM 04 A 2101-D No. 1070075000-202, SN:001299671, used, normal signs of use, 100% functional, scope of delivery as per photos Itjdpei D T Umsfx Addsb

Condition: excellent (used), Drilling machine for turned components Triade Itedpfxsyabz Ie Addjb Number of drilling units: 3 Drilling depth: 100 mm per side

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Itjdexyupkspfx Addjb Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw