9
HUCKEPACK Partial Cooling AEK2200 + Freezer Incold
GENERAL FEATURES:
max. power input 1.81 kW
Range -25°C to -18°C
Up to 13.7 cbm at ambient temp. of +32°C and cell temp. of -18°C
Up to 9.8 cbm at ambient temp. of +32°C and cell temp. of -22°C
Up to 7.9 cbm at ambient temp. of +32°C and cell temp. of -25°C
Chamber dimensions
Inside 2,00x1,80 m
Outside 2,20 2,00 m
Height: 2,10 m
Br0knipnfm
Item condition: used, cables have been disconnected, damage to plastic
You can find more items - new ...
3
There are two identical Chamber Filter Presses HÄCKER 01.063 available, with automatic controls, documentation and accessories.
Buaghndlxr
12
Used double chamber vacuum packaging machine InterVac is a packaging machine made entirely of stainless steel. Two chambers ensure greater efficiency and are used in every industry where vacuum packaging of products is required. The machine is equipped with a high-performance Busch vacuum pump with a capacity of 100m3 / h and four sealing bars with a length of 600mm. The internal dimensions of the packing chamber are: 720 x 620 x 190 mm.
Manufacturer: InterVac
O9rod
Model: INV 10/10
Height: 100...
12
KOCH ULTRAVAC UV2100 Double Chamber Vacuum Packing Machine. The object is in a novel state and fully functional.
- Die Cast Aluminum Body
-Digital Control System
- High performance vacuum pump: Busch RA0250
- Chamber: 780mm W x 670mm x 200mm
- Parameter Lockout and Pre-program Package
- Wide Band Seal Bar
- Anti-wrinkle Hold Down Bars
- Air Compressor Seal Assist System
- LBH Knife System
Power: 400v 50 Hz 25amp
- vacuum pump: Busch RA0250
Type: Oil Lubricated Rotary Vane
Displayment: 180 CFM
C...
6
3
chamber-/convection oven, temperaturee range 250°C, 10,9 kW, 12 kVA, 400 V, useable room- 0,216 m3, total vapor chamber 0,384 m3, mind. exhaust volume 120 m3/h, with base construction (contaminated with selenium-dust)
Bivur3hegz
7
Included steel framework from TMG Maschinenbau - The Wood is not included.
Incl.Piston diaphragm pump from Abel HMB 50-500: year of manufacture: 2007, engine: 30 kW, delivery rate: 50 m³/h
Bjtzeolehm
3
Max. working pressure: -1bar, connected load: 5.5kW.
Bha8gg3rmj
7
hardening chamber for Silicon glue
Qtzivky
5
Offered is a cooking chamber Fa. ASCA CONSULTING Bj. 12/2014 The chamber is electrically heated and has a power of 20 KW. Content of the chamber is 1800Ltr. Dimensions: Inside width: 220cm, Depth: 100cm, Height: 180cm Outside dimensions: Width: 170cm, Depth: 140cm, Height: 260cm. The plant is directly available and must be dismantled itself.
(Forklift is available on site)
Fddjeykda
Cash or prepayment!
Sale only to traders, no guarantee, no warranty.
1
Taillight 7 chambers, left (AANH-00907) A taillight with 7 chambers. The inside lamps that are required for this are: 4 x 21 Watt BA15S and 3 x 5 Watt BA15S. (Not included) This taillight has a E2 approval. Equipped with the following functions: rear light, brake light, flashing light, reversing light, rear fog lamp, side marker lamp and etingen: Length: 470 mmWidth: 130 mmHeight: 90 mmCentrel distance: 150 mmHere the rules and obligations of lighting on a trailer! (Click with the mouse on the l...
3
Please give us your quoted price
Sales only within Europe, incl. Turkey
=====
Without packaging; Technical data please see handout in attachment.
Iwph8dg
German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations.
7
Here we offer UV-irradiation Chamber a UVACUBE 2000.
Curing Chamber for curing UV reactive coatings, adhesives and potting compounds
as well as the sunlight simulation and a material aging test
System properties:
Ozone free Hönle spotlight with standard and special spectra
Two-stage power control
Optional temperature reduction of ACM
Technical data:
Befv8k8fzs
Supply voltage 230 V / 50 Hz
Power 2000 W
Dimensions Hxwxd 834 x 466 x 402 mm
Type: UVACUBE 2000
Condition: pre-owned / used
Scope of del...
9
chamber dimensions: 800x800x100mm x 2 pieces
Without steering!!
N3i7t
Vákuum OK.
Welding. OK
1
Taillight 7 chambers, Right (AANH-00906) A taillight with 7 chambers. The inside lamps that are required for this are: 4 x 21 Watt BA15S and 3 x 5 Watt BA15S. (Not included) This taillight has a E2 approval. Equipped with the following functions: rear light, brake light, flashing light, reversing light, rear fog lamp, side marker lamp and etingen: Length: 470 mmWidth: 130 mmHeight: 90 mmCentrel distance: 150 mm Here the rules and obligations of lighting on a trailer! (Click with the mouse on the...
1
3 Chamber light with licence plate illumination (AANH-00307). This taillight is often used on older caravans and trailers. It has a retro look with the functions of a 3 chamber rear light. The bulbs needed for it are: 2 x 21 Watt and 2 x 5 Watt tube lamp. (Not included) This taillight has an E3 approval. Equipped with the following functions: lighting, brake light, blinker and reversing light. The 3 chambers can be slid out to mount the base frame with screws or bolts. The back of the units are ...
6
Chamber Furnace with Gas-tight Muffle for Protective Gas Operation NABERTHERM Type N 41 / M
Muffle furnace, vacuum hardening furnace, hardening furnace
serial no. 197383 year of construction 2007
Dbl8shpx
Temperature range max. 1100°C
Inner dimensions D x W x H 450 x 320 x 150 mm (height in the middle 200 mm)
Charge weight max. 35 kg
Connected load 20 kW
Motor power fan 1,1 kW
Mains connection 400 Volt, 50 Hz, 28,8 Amp.
- without temperature control (complete electric cabinet missing)
- Heating ...
closing pressure 3150 kN
clamping plate 900x900 mm
distance between columns 550x550 mm
weight of the machine ca. 15,5 t
lock stroke 500 mm
capacity of ejector 159 kN
Bjkywcj3pq
ejector stroke 120 mm
height of form 300-700 mm
column diameter 110 mm
casting capacity 158 kN
casting plunger stroke 250 mm
injection plunger diameter 70,80,90,100 mm
casting volume (DIN 24480) 514,791,1105,1455 cm 2
volume cast pressure 410,316,249,201 kp/cm²
casting area 768,996,1265,1597 cm 2
Traverse Stroke 300 mm
...
6
Melting furnace up to 1340 Celsius, 10Kw, circulating air, 380Volt, 15 A
G8gj7yj
10
Please name your offer price
Price without packing; delivery condition: FCA (machine location)
=====
Machine is still with the complete line manufacturer. The equipment is completely finished and passed the pre-acceptance.
Suo7tk
Technical data see handout.
Any warranty right is excluded.
For the correctness of the technical data and year of construction,
for the completeness of accessories and tooling,
as well as for the adherence to all safety as well as environmental protection requirement...
10
Auction ended
max 950 degrees C / Tmax long-term operation 850 degrees C, volume 225L, inside / retort 544c895x447mm, exact temperature distribution, 50kW 400V 50Hz, LxWxH, approx. 2x2x2m, weight, approx. 1,4to
X9i7xy8
14
Here we offer you a HSR temperature chamber for material testing machines.
HSR temperature chambers for tests in the temperature range - 40°C to + 250°C
Tempering down to -80°C also possible due to available LN connection
Traceable test results and perfect integration of the temperature chamber into the test system.
External dimensions: Depth 1500 mm Width 600 mm, Height approx.920 mm
Internal dimensions: depth 500 mm width 450 mm, height 700 mm
Diameter of feed-through opening: 12.5 cm
Connecti...
6
Batch size: 650 x 1,300 mm (B x W)
batch weight: 600 kg
Temperature max.: 950 °C
heating value: 8400 kcal/m^3
connected load: 45 kW
connection: 50 m^3/h
3zena7c0
Equipment: control cabinet new + WS recuperative burner
closing pressure 900 kN
clamping plate 540x540 mm
distance between columns 350x350 mm
weight of the machine ca. 5,5 t
lock stroke 280 mm
capacity of ejector 60 kN
ejector stroke 70 mm
height of form 160-400 mm
column diameter 65 mm
casting capacity 75 kN
casting plunger stroke 130 mm
injection plunger diameter 50,55,60 mm
casting volume (DIN 24480) 119, 163, 214 cm 2
volume cast pressure 380, 315, 265 kp/cm²
casting area 236, 285, 340 cm 2
Traverse Stroke 150 mm
Used Die Casting machine DAW ...
5
melting furnace up to 750 C^, 380 Volt, 8Kw, 12A, year 1992, fully functional
Dx3cti
12
Standard features
Double chamber machine
Automatic lid
Large chamber for high output
Bsxnz9f90u
1
Chamber oven, unused, with new machine warranty
-classification according to AMS 2750E class 2
-operating temperature: 250 - 700°C (can be increased to 850°C without problems)
-External dimensions: W x H x D 3,5 x 4,0 x 3,5m (without door portal)
-Payload dimensions: W x H x D 1.8 x 1.6 x 1.8m (working zone)
-Burner: 2
-Nominal power: 2 x 100 kW
-Fuel: natural gas
-Temperature controller: SPS based software controller with
high resolution SPS input cards
-PLC control: Siemens S7 3XX programmed...
4
There are two identical furnaces available, max. operating temperature: 1100°C, inner dimensions: 1100x1300x950mm, length: 2455mm, width: 2440mm, height: 3346mm.
Bsprcha0cs
7
Heraeus MR 170 chamber furnace
Temperature max.: 1000 degrees
Size of opening: 170 x 90 mm
Depth of chamber: 300 mm
Oxtyj
Volume: 3,8 L
Operating voltage: 220 V 50 Hz
Machine weight approx.: 60 kg
Space requirement approx.: 700x550x800 mm
Item condition: used
Further articles - new and used - you will find in our shop!
International shipping costs on request!
closing pressure 240 kN
clamping plate 380x380 mm
distance between columns 250x250 mm
weight of the machine ca. 3000 t
lock stroke 180 mm
capacity of ejector 30 t
ejector stroke 50 mm
Bjkywl2cdr
height of form 120-300 mm
column diameter 45 mm
casting capacity 40 kN
casting plunger stroke 85 m/m
injection plunger diameter 36, 40, 45 mm
casting volume (DIN 24480) 39, 56, 79 cm³
volume cast pressure 392, 317, 250 kp/cm²
casting area 61, 76, 96 cm 2
Traverse Stroke 105 m/m
Used Die Casting machi...
4
The machine is in good technical condition.
Dismantled, loaded on truck.
Bcvamukh2j
7
Vanicek type drying kiln loaded with track cars.
O2iv2
The plant consists of 2 assembled drying chambers, once 32 packages once 24 packages.
With interest we send you gladly a detailed documentation. The plant is in operation until week 40 2021, and must then be dismantled and shipped by the buyer within one week.
7
Air circulation furnace with safety concept:
Dilution of the furnace atmosphere with air, so that an ignitable mixture can be created.
F30bdsz
-120 litres
-Internal W x D x H 360 x 480 x 360 mm
-Tmax 450°C
-Horizontal air circulation
-Air baffles in the furnace, optimal air circulation
-temperature uniformity according to DIN 17052-1 +/- 4°C
-extra control cabinet
-Nabertherm control system
swivel door hinged on the right, quick-release fasteners
feed-through on the side, e.g. for thermocouple
-...
7
Offered is a double camera vacuum machine Komet SD320 Bj.2009. with 100-er pump, gas flushing.
Camera size ca.60x45cm.depth ca.25cm. 400v. 16A. The machine is workshop tested, defects removed.
Oso77
Cash payment or prepayment.
Sale only to traders, no warranty, no guarantee.
4
Lubot & Wakker
Type: 1 pallet vacuum chamber
Capacity: up to 2.000 Kg (6-8 charges) hr
Ht0vzihfo
Completely stainless steel
Dimensions chamber: L x W x H = 2.200 x 1.700 x 3.400
Weight: 1200Kg
Electric: 380V 3P+N+E, 7,25Kw
Compressed air: 6 bar
Drinking water: 3 bar aprox. 1250 ltr/hr
Features: Controll cabinet
vacuümpump
mix-tank water preparation
Storage tank with pump valves etc
closing pressure 2200 kN
clamping plate 755x755 mm
Ndevoxtn
distance between columns 500x500 mm
weight of the machine ca. 8 t
lock stroke 430 mm
capacity of ejector 110 kN
ejector stroke 100 mm
height of form 250-600 mm
column diameter 85 mm
casting capacity 130 kN
casting plunger stroke 175 mm
injection plunger diameter 70,80,90 mm
casting volume (DIN 24480) 450,636,856 cm ³
volume cast pressure 335,260,203 kp/cm²
casting area 656,846,1078 cm 2
Traverse Stroke 230 mm
Used Die Casting machin...
3
The machine is technically in good condition
G0sk7zn
12
Glasbeek Finish Gas Chamber Furnace Type 003.05
Glasbeek finish
Gas chamber furnace
Type 003.05
With loading trolley
Maximum temperature 200 ° C
Approximate inside dimensions (B1900mm x T2950mm x H1800mm)
Bfl2jndj9x
More articles - new and used - can be found in our shop!
International shipping costs on request!
3
Warranty 12 months , Delivery 17.KW 2021
-temperature 250°C
-Inside WxDxH 1500 x 3000 x 2000 mm
-outside WxDxH 2410 x 3560 x 2730 mm
-content 9000 litres
-control Omron E5CC (setpoint/actual value controller)
-Timer Galaxy
-overtemperature protection Omron K8 Relay
-Tracks in
-2 pcs. circulating air fans
-Exhaust air and supply air flap manually adjustable
-Safety door switch
-power 43 KW
-connection 400 V , 3 phase
-not suitable for substances containing solvents
-temperature accuracy +/- 5°C
-...
7
Carbolite high temperature chamber furnace
Here we offer a Carbolite high temperature chamber furnace.
High Temperature Chamber Furnace
Cupzl22
Carbolite HTF 18/4 up to 1800°C
Internal dimensions Height 140 mm × width 140 mm × depth 190 mm
External dimensions Height 565 mm × width 830 mm × depth 650 mm
Connection:
Volume 3.7 litres 230 V 4.65 kW
Weight: 115 kg
Type: HTF 18/4 / 1800°C
condition: used / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications...
6
1
closing pressure 600 kN
clamping plate 460x460 mm
distance between columns 300x300 mm
weight of the machine ca. 3,8 t
lock stroke 230 mm
capacity of ejector 40 kN
ejector stroke 70 mm
height of form 120-350 mm
column diameter 56 mm
casting capacity 54 kN
Bn03hiq2bi
casting plunger stroke 130 m/m
injection plunger diameter 45,50,55 mm
casting volume (DIN 24480) 109,150,194 cm 2
volume cast pressure 339,284,226 da/cm²
casting area 176,218,264 cm 2
Traverse Stroke 220 m/m
3
Gas heated furnace, make VEI
type: KA_GB_TO
7anbzll
external dimensions (w x h x d): 3000 x 3700 x 2300 mm
interior dimensions (w x h x d): 1500 x 2200 x 1500 mm
temperature: 300 ° C
loading weight: max. 2500 kg
circulation fans: 2 x 4,0 kW = 8 kW
heating power: 120 kW
4
Nolzen LWSW 100/70/200 furnace 750°C
Stud LWSW 100/70/200
Industrial furnace
max. temperature 750°C
Nwhdx
100 kW
380 volts
Inner dimension:
width: approx. 1,05m
Depth: approx. 2,30 m
height: approx. 1,53m
Outer dimensions:
width: approx. 2,22 m
Depths: approx. 2.30 m
height: approx. 2,60 m
More articles - new and used - you will find in our shop!
International shipping costs on request!
13
COLDCHAMBER-HORIZONTAL DIE CASTING MACHINE
manufacturer ITALPRESSE
type M550
Lgbu9xen
year of manufacture 1988
Revidiert & modernisation 2002
EQUIPMENT
with dosing ladel Italpresse linear
free programmable command SIEMENS S7
Operator Panel IP Gefran
3-phase injection system with intensification
central autom. die height adjustment
core pull units I+II M
hydraulic stroke limitation system
automatic central lubrication
Motorized safety door operator side
Motorized safety door back side
hydraulic...
10
We offer a UHV vacuum chamber ultra high vacuum chamber.
UHV vacuum chamber Ultra high vacuum chamber with two viewing windows,
Lids and 20 seals
1052474 406.4 x 3.0 14571 CH. 17748 W2
Condition: used / used
Scope of delivery: (See picture)
(Changes and errors in the technical data, information is reserved!)
8fr9jq93
We are happy to answer any further questions on the phone for you.
4
Vacuum chamber of the glass Exikator glass
The glass cylinder and glass lid can reactions
as well as behavior of various liquid substances / products
visible are tested under vacuum.
Easy handling and operation
Plenty of connectivity options
Volume of 13.9 litres
Good and simple way of cleaning
Weight 14.5 KG
Areas of application:
Laboratories for reaction tests under vacuum
Production E.g. drying of components
Universities E.g. for screenings
Research for example hardening by plastic
Vacuum c...
closing pressure 900 kN
Hv7om2cf
clamping plate 540x540 mm
distance between columns 350x350 mm
weight of the machine ca. 5,1 t
lock stroke 280 mm
capacity of ejector 61 kN
ejector stroke 70 mm
height of form 160-400 mm
column diameter 65 mm
casting capacity 78 kN
casting plunger stroke 130 m/m
injection plunger diameter 50,55,60 mm
casting volume (DIN 24480) 147, 191, 241 cm 2
volume cast pressure 396, 327, 275 da/cm²
casting area 226, 274, 326 cm 2
Traverse Stroke 220 m/m