Used Aluminium Saw Machine for sale (85,870)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x1300x1800 mm Weight 0 kg Total power requirement 2,2 kw Todpfx Aev A Hgkjdlsf

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height Tsdjudi Unspfx Adljf 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: used, functionality: unexamined, machine/vehicle number: 16124 91, saw band length: 4,100 mm, total length: 2,000 mm, total width: 1,150 mm, feed length X-axis: 1,200 mm, JAESPA W 320 G Horizontal Bandsaw Automatic 320 mm Hydraulically controlled horizontal bandsaw for solid and profile materials Tsdpfow Dzvnjx Adlef Cutting range round: approx. 320 mm Material clamping: hydraulic Saw band length: 4100–4170 mm Machine control: manual/hydraulic Type plate no.: 16124 91

Condition: ready for operation (used), functionality: fully functional, sliding table length 1500mm scoring unit Tedpjxhd Aiofx Adlef fence with angle regulation max blade diameter 300mm spindle diameter 35mm spindle speed 3/4.5/6/8 tys. RPM connection 380V

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Tedpfxjq Ii Dlj Adlof Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: good (used), Year of construction: 2004, sawing machine for non-ferrous metals transmission range up to Ø60 mm respectively 70 x 70 mm cut-off length up to 250 mm engine power: 3 kW rotation speed: 180 - 4800 rpm sawing blade up to 250 mm pneumatic voltage flow cooler control system renewed: 2011 ESTA oilmistseperator type AS 600, year of construction: 2006 We sell only to companies with registered office in the EU. Dispatch type: ex works Tedpfx Aefkh E Asdljf Payment term: Prepayment

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x780x1500 mm Weight 500 kg Total power requirement 2 kw Tedpovz Htuofx Adlsf

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Tedsvuf S Njpfx Adlof Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 113307651086088, saw band length: 4,115 mm, saw band width: 38 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, cutting height (max.): 260 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Additionally, a chip conveyor is integrated to increase efficiency. Tsdpfxewqw Tvo Adljf Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Tedpst Uk Rmofx Adlef

Condition: used, functionality: limited functionality, cutting height (max.): 90 mm, cutting width (max.): 140 mm, cutting length (max.): 2,820 mm, total width: 950 mm, total length: 3,600 mm, total height: 1,250 mm, saw blade diameter: 300 mm, type of input current: three-phase, rotational speed (min.): 3,000 rpm, OMGA TR2-A Double Mitre Saw for Wood and Aluminium Specifications: • Condition - used, requires adjustments and minor repairs • Manufacturer - OMGA • Model - TR2-A • Main motors - 2 x 2.2 kW (3,000 rpm) • Pneumatic head control • Max cutting length - 282 cm • Min cutting length - 15 cm • Max cutting cross-section - 90x140 mm (at right angles) • Max blade diameter - 300 mm • Extraction nozzles diameter 80 mm • Angle cutting range from -45 to +45 degrees (right, left) • Vertical clamps for material hold-down • Weight - approx. 600 kg • Overall dimensions - 360 x 95 x 125 cm (L x W x H) Additional information: • Machine operational but requires minor fixes and adjustments Tsdpfx Ajxl Ecxjdlof • Provided photos show the actual condition of the item for sale • Possibility to power up and test the machine on site

Year of construction: 2023, condition: new, The stationary mitre band saw machine for universal use. Function: - manual or semi-automatic Design: - Solid cast saw frame - Saw frame can be swivelled over the material - Robust vice with quick clamping lever - Large cutting range - Saw band guides made of steel with ball bearings - Chip clearing brush - Hydraulic display of saw band tension - Electric coolant device Technical data: - Mitres from 0° to 60 Tjdsg Hy Tqepfx Adlof - Cutting speed 45 and 90 m/min. - Machine weight 200 kg - Saw drive 1,1 kW - Saw blade dimension 2480x27x0,9 mm Cutting range at 90 Ø 225 or 240x160 or250 x110 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100xx750x1380 mm Weight 450 kg Total power requirement 0,5 kw Tjdpfxjvz Htnj Adlsf

Condition: excellent (used), Machines belonging to the LINE (Ref. SOFIT code : YZ0900) Splitting Saw Machine (used to split in two parts the unique workpiece-panel) Minimum length of the workpiece: mm 250 (ca.) Maximum length of the workpiece: mm 3000 (ca.) Todjf N Ngbjpfx Adljf Minimum width of the splitted workpieces: mm 120+120 (ca.) Maximum width of the splitted workpieces: mm 600+600 (ca.) Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Max forward speed: m/min 60 Along with the following groups: Lower Scoring Unit (power KW 3) max saw diameter mm 350 Upper Bevel Trimming Unit (power KW 3) max diameter mm 300 Main Sawing Unit (power KW 11) max diameter mm 450

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which Tjdpefww Sqsfx Adlof composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: ready for operation (used), Jaespa AS 6 Vertical Band Saw Blade length: min - 4400mm; max - 4600mm Table: 670mm x 670mm Thrust: 620mm Weight: 834 kg Tsdpfswcp Rkox Adlof Dimensions: 1400mm x 800mm x 2250mm (L x W x H) You are welcome to stop by for a viewing. We are happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, Year of construction: 2025, functionality: fully functional, 📌 BAS 100 (STA) - Swaging machine for band and gang saws, automatically hydraulically controlled Saw tooth swaging is another method, alongside setting, to ensure the saw blade's free cutting action during stock removal. During the swaging process, a swaging bolt is positioned in front of the saw tooth while the tooth is held against an anvil. The rotation of the eccentric swaging bolt shifts the saw blade material toward the tooth tip. Once the swaging process is complete, the swaging bolt automatically returns to its original position. Tsdpov Tqzyjfx Adlef

Condition: excellent (used), Year of construction: 2014, Manufacturer: Henrik WINTER HOLZTECHNIK GmbH (Leipzig, Germany) Model / type: SAWMAX 600 Year of manufacture: 2014 Serial number: 130705-28 Power supply: 3×400 V, 50 Hz Maximum power: 1.69 kW Tjdpfxew R E Slj Adlef Weight: 650 kg Certificate: CE

Condition: new, Year of construction: 2025, CORMAK BS530H Metal Band Saw – A Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal band saw is an efficient semi-automatic bandsaw designed for precise cutting of steel elements, pipes, and profiles at various angles. Its solid cast-iron construction, reinforced blade guidance system, and advanced hydraulics make it ideal for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all functions, significantly reducing operation time and improving workplace ergonomics. Key Advantages of the Machine Semi-automatic operation – hydraulic arm lifting/lowering and vise control via control panel. Worm gearbox with bronze components ensures smooth, vibration-free, and precise operation. Tedpjw U Svlsfx Adljf Stepless cutting speed adjustment from 20 to 70 m/min – suitable for various materials. Carbide and ball-bearing blade guides for durability and precise blade tracking. Quick-release vise, manually or hydraulically controlled, adjustable left/right. Miter cutting range from -45° to +60° with precise angle scale reading. Heavy-duty cast-iron frame ensures cutting stability and long machine life. Hydraulic feed rate control with adjustable return height of the saw arm. Construction and Technology The BS530H model features a reinforced drive system and industrial-grade hydraulics, ensuring reliable performance under intensive use. The massive frame construction minimizes vibration and ensures consistent cutting performance. An ergonomic control panel allows full process control from one location. The coolant system, integrated into the base, efficiently removes heat and debris, protecting the blade from overheating. Cutting Precision and Efficiency With stepless speed control, manual or semi-automatic operation modes, and a dial gauge blade tension meter, the BS530H delivers repeatable, high-quality cuts, even in long production runs. A material support roller and arm lock after the cutting cycle enhance operational safety and efficiency. Applications The CORMAK BS530H is dedicated to industrial production facilities, metalworking shops, and companies performing serial cutting of profiles, pipes, and solid steel sections. It’s ideal for serial manufacturing, prefabrication, and component preparation for welding or further processing. Standard Equipment Control console with semi-automatic functions Hydraulic vise Blade cleaning brush Coolant system with pump Front material roller Dial gauge blade tension meter CE certificate and technical documentation (DTR) Technical Specifications: Parameter Value Working height 965 mm Cutting speed 20 – 70 m/min Blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total power 3.0 kW Power supply voltage 400 V Dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 Todpfx Aou Tqb Uedlef - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 - Thickness (min./max) of the workpiece: mm 10 / 30 ca. - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350

Condition: new, Year of construction: 2024, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Tedogculvjpfx Adljf Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2007, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 282395-6570 002, No minimum price - guaranteed sale at the highest bid! Fully automatic cutting and processing of aluminum profiles in throughfeed for building elements, facades, furniture and industrial applications. Machine was overhauled in 2022 - in-transport plastics renewed, Schüco service done and adjusted, new circular saw blade purchased, and more TECHNICAL DETAILS Processing length: max. 7,500 mm Todpfxeu U Hf Ee Adlef Profile cross-section: max. 160 x 270 mm height Working height feed magazine/machine: 950 / 1,120 mm Pneumatic operating pressure: 6 ± 1.5 bar X-axis travel: 246 mm Y-axis travel: 250 mm Speed: max. 170 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Angle of rotation B-axis: max. ± 45° Saw motor power: 3 kW Saw blade speed: max. 3,000 rpm Tools Saw blade diameter: 550 mm Condition: new in 2022 MACHINE DETAILS Rated voltage/frequency: 400 V / 50 Hz Number of phases/neutral conductor/protective earth conductor: 3 NPE Rated current consumption: 35 A Machine weight: 1,700 kg Note: The machine's take-off has been shortened, but can be extended again

Condition: new, Year of construction: 2026, functionality: fully functional, Automatic Sharpening Machine for Frame Saws – GAP 100 (Machine available from January 2026) The automatic profile grinding machine GAP 100 has been specially developed for the precise sharpening of frame saws. Its compact and highly robust design guarantees a long service life and maximum reliability in daily operation. Equipped with advanced technology and an easy-to-use control system, the GAP 100 offers high functionality – both for standard applications and for demanding grinding tasks. Tedpfjv Tl Arox Adlsf An excellent price-performance ratio, minimal maintenance requirements, and intuitive operation make this machine the ideal choice for sawmills that value quality, efficiency, and cost-effectiveness. The GAP 100 consistently delivers precise grinding results, reduces your operating costs, and sustainably increases your productivity.

Condition: new, Aluminum format sliding carriage with hardened steel guide rods. Parallel stop with micrometric fine adjustment. Milling spindle and saw blade can be pivoted and completely retracted. 100% Made in EU (developed, built, quality-tested) Technical data Circular saw: Max saw blade diameter 315 mm Spindle diameter 30 mm Format table length 2300 mm Max. cutting width at the parallel stop 1100 mm Max. cutting height, 90°/45° 103 mm/72 mm Motor output 3.8 kW S6 (3 kW S1) Suction nozzle diameter 120 mm Mill: Spindle diameter 30 mm Pivoting spindle 90°/45° Tsdpfx Asvrvdkodlsf Height adjustment of the spindle 175 mm Spindle speed 10000/8000/6000/ 5000/4000/3000 Motor output 3.8 kW S6 (3 kW S1) Weight 790 kg Optional accessories: Longer Format sliding table Motor output 5 Kw (4 Kw S1) Integral stop on the milling stop Miter grid on the laying table Scoring cutter, interchangeable spindle for router

Condition: new, Year of construction: 2025, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Tsdew U Skvjpfx Adlef Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.