Length of the cut - 3000 mm
Width of the cut - 1900 mm and 2950 mm
Fence 750 mm
Auto cut set for cutting backward and forward
One sided blade
Double sided blade
Cut thickness 1mm - 850mm
Speed control for rotation of blade
Zthyl0f7
Variable speed control for cutting the length
Blade Size: 9745.20.0.5.18TPI
Working range: bars and tubes up to Ø 340mm
Maximum cut-off length:
Single feed: 400 mm
multiple feed: 2.000 mm possible
Power requirement: approx. 4.5 kW
Power of saw drive motor: 2,4 / KW
Gearbox for saw drive: Stöber R 57 VW 3
Cutting speed I: 11 - 55 m/min.
Cutting speed II: 22 - 110 m/min.
Btmjgtz08b
saw band dimension: 4.870 x 32 x 1,1 mm
Hydraulic oil: approx. 33 litres viscosity 68 cSt at 40°.
Coolant: approx. 50 litres (recommended "Forte SP 6)
weight of the machine: approx. 2.000 kg
ma...
Saw band width: 35-100 mm
Tooth pitch: approx. 3 - 75 mm
Master blade thickness: approx. 0.5 - 3 mm
Saw band length min.: 2800 - 7000 mm
Grinding speed: approx. 100 - 5000 mm / min.
Grinding wheel diameter: Ø 250 mm
Btklddilju
Grinding wheel width: 6-10 mm
Grinding wheel bore: Ø 32 mm
Grinding motor: 0,55 kW
Connected load: approx. 1.8 kW 400 V / 50 Hz
mass: about 600 kg
Dimensions W x D x H: 1393 x 1349 x 1370 mm
colour: light gray RAL 7045 / dark gray RAL 7047
Suitable for resharpening CV, bim...
With Ideal welding machine
throat (min./max., mm) approx.: 480 mm
Distance spindle-table (min./max) approx.: 310-610
Drive power (kW) approx.: 2,0 / 2,4
Itf9met
spindle speed approx.: 102-2000 stepless
Ventilation
Air compressor for blowing chips
Rubber coating good
Saw blade
weight 600 kg
Motor power 1,5 kW
F3ynwcr
mains connection 380 Volt, 50 Hz
- infinitely variable saw band speed via PIV gear with hand wheel adjustment and 2 gear steps
- saw table tiltable in 2 axes
- machine light
space re...
for leveling of band saw blades until 300 mm width and 6 - 12 m length, incl. electronic messure systeme and 2 pair pneumatic leveling rollers, incl. automatic controll of the tracking way
Iouwsugwq
4 x sanding pad:
- 2 x 25 mm surfaces
- 1 x 20 mm Convex
- 1 x 30 mm Convex
used
manufactured by Braun
type BP 700
working width 700 mm
table tiltable
Bn0j22tkhv
sanding height 190 mm
required space ca. l x w x h mm
1400 x 700 x 1700
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck -
BOMAR Ergonomic 320.258 DGH band saw
The 320.258 DGH band saw is the latest model from the Ergonomic Series. What makes this machine so special is its rotating saw table, continuously variable speed, quick-clamping device and large sawing capacity. With this robust semi-automatic band saw you cut all your materials (steel, stainless steel, aluminum) quickly, accurately and easily.
Cutting capacity diam. 258 mm / 320x200 mm
- Fully hydraulically controlled (saw feed, lift, clamp)
- Automatically ...
Title MEP PH262 CCS [with semi-automatic lowering]
Article number PH262 CCS
Engine power 0.70/0.81 kW
Bank opening 245 mm
Tape dimensions 2450x27x0,9 mm
Weight 265 Kg
Speed 46/92 m/min.
cutting area 0° 225 / 200x200 / 240x160
Cutting surface 45° right 160 / 140x140 / 155x115
Cutting surface 45° left 145 / 125x125 / 150x100
Cutting surface 60° right 90 / 90x90 / 90x90
Cut surface 60° left
Description
Band saw machine for double mitre cuts
from 45° right to 60° left.
With the C.C.S. system, the ...
Technical data:
Cutting diameter round steel: max. 500 mm
cutting diameter square steel: max. 500 x 500 mm
CNC-control
saw blade length: 6570 x 41 x 1,3 mm
Cutting speed: 18 - 100 m / min.
motor power: 12 kW
Btkg9vr0h2
working height: 824 mm
dimensions (length x width x height ): approx. 3300 x 3900 x 2800 mm
Weight: approx. 4,5 to
The seller is not liable for writing or data transmission errors. The machine is in optics, technology and wear according to the age; used machines are sold without a...
1 used automatic band saw, make Danobat, type CR 330 A, year 1998
Technical data:
Automatic double column saw DANOBAT mod. CR 330 A.
Maximum shaft diameter (90 degree cut) 330 mm
E73prvq2k
Minimum band saw blade speed 14 m / min
Band saw blade speed 105 m / min
Total power requirement 3 kW
Machine height 1878 mm
Machine width 1727 mm
Machine length 2438 mm
Machine weight approx. 1,7 t
OFFER 21085
Technical data:
- cutting range W 500 x H 510 x L 1200 mm
- hydr. table feed
Btk9x0hec7
- table feed up to approx. 1200 mm
- max. table load 2000 kg
- saw band dimension 4670 x 38 x 1,3 mm
- band speed infinitely variable 15 to 90 m/min
- chip conveyor
- drive 400 V / 7,5 kW
- space requirement approx. W 3250 x H 2400 x D 1800 mm
- Weight approx. 4000 kg
with reinforced motor in 4,0kW 4800 V / 50 Hz
TECHNICAL SPECIFICATIONS
wheel diameter3 x 600 mm
Saw blade speed 1550 m/min
Max. cutting height/width1000 mm / 1450 mm
Max. Saw blade length7700 mm
Saw blade widthfrom 15 - 35 mm (0.6 mm thick)
Table size1940 x 1000 mm made of steel
Table height825 mm
Suction socket4 x Ø 100 mm
ColourRAL 7035 light grey, doors and table edge RAL 3001 signal red
TECHNICAL DESCRIPTION
Solid German mechanical engineering
Dxfyri
Machine stand in elegant modern, torsion-...
The saw has been in storage in Germering for about 18 months. It was dismantled in fully functional condition.
It can be inspected by arrangement.
Operating instructions, wiring diagrams, and spare parts catalog are available.
Btukho23up
A roller track according to photo is present.
Included are 3 HSS saw bands as per photo.
Manual bandsaw machine for cuts from 0° to 60° right.
Hydraulic band tensioning, bow handle with control knob.
Hj0bap7r
Combination band guide with lateral bearings.
Carbide cutting plates and upper bearing.
Manual cutting or cutting without operator, with the weight of the handle and controlled by hydraulic brakes; then the handle is manually raised to the desired position.
Manual clamp for a fast and precise locking of the piece.
The rotation of the clamp from 0° to 60° right with locks, preci...
Cutting capacity approx. 90° 450 mmCutting capacity square 90° 425 mmDelivery time approx. 8 weeks after placing the orderCutting capacities: 90°: approx. 450 mm, square 425 mm, rectangular 610 x 425 mm45°: approx. 430 mm, square 425 mm, rectangular 430 x 425 mm60°: approx. 320 mm, square 290 mm, rectangular 260 x 425 mmSaw band dimensions: 5.400 x 41 x 1.3 mmStepless belt speed: 20-100 m/min.Working height: 735 mmMotor: 4 kWHydraulic motor: 2.2 kWCoolant pump: 0.12 kWLength: 2.850 mmWidth: 2.10...
for leveling of band saw blades until 300 mm width and 6 - 12 m length, incl. electronic messure systeme and 2 pair pneumatic leveling rollers, incl. automatic controll of the tracking way
Xlt7vgrt
Technical specifications:
Cutting: Ø 550 mm
Cutting flat: 1020 x 550 mm
Bqzqzx3h9p
Cutting speed: 15 - 100 m/min
Saw band size: 54 x 1,6 mm
Dimensions:
Length: 2150 mm
Width: 1900 mm
Height: 2500 mm
Weight: 3200 Kg
Notes:
Availability immediately
Automatic hydr. band saw BROWN PEDRAZZOLI
Mod: SN 270 / S - AP - CN
Bod0h2pgm9
year of construction: 1996
with manual mitre adjustment from 0 - 60° left
sawing range - round 220 mm or 270 x 180 mm
at 45° round 180 mm or 180 x 120 mm
Saw band speeds are infinitely variable.
Multiple feed length up to 650 mm.
Single cuts manually possible. ( vice closes =
Saw is manually guided by hand.
Semi-automatic = it controls the sawing cycle.
Saw blade dimensions:...
Technical data:
Cutting diameter round steel: max. 360 mm
cutting diameter square steel: 360 x 360 mm
saw blade length: 4100 x 32 x 1,1 mm
Sawing speed: 19-130 m/min.
working height: 710 mm
Motor power: 7,5 kW
dimensions (length x width x height): approx. 2600 x 2300 x 1900 mm
Weight: approx. 3,1 to
accessories:
Chip conveyor
Brzddj3j7p
cooling water system
roller table
The seller is not liable for typing or data transmission errors. The machine is in optics, technology and wear according to t...
for band saw blades up to 120 mm blade width, curved tooth form, max. tooth tip distance (pitch) 50 mm, with grinding dust exhaust, 2 large saw blade guide rollers with height and lateral adjustment
Btwjog7
Vertical band saw machine make PEHAKA type SH 9 spec.
Machine # 276361390
Technical data:
Roll diameter 900 mm
cutting height (lower guide) 520 mm
Bq3pqusifj
cutting width 880 mm
Table size without rear table 850 x 900 mm
belt speed 1650 m/min
gr. blade length 6250 mm
engine power 7,5 PS
weight approx. 1100 kg
with
- guide under the table
- table adjustment by handwheel 5° left
45° right according to scale, 1° division
Clamping and releasing with foot pedal
- scale with 0,1° graduation
- aut...
Available optionally with pneumatic Vice.
Upon request, we provide individual roller rail systems!
Manual cutting cycle
AUTOMATIC cutting: (switch) with stepless lowering speed and adjusting the cutting pressure via spring settings
Sturdy, torsion resistant and low-vibration saw frame made of cast steel
Large, easily adjustable, and bearing rotary table, mid salmon bolt centered turntable with indexing at 0 ° / 45° / 60° and internal table clamp for angle
Vice with quick adjustment
Tungste...
make Forte, type SBA240, saw diameter max. 240 mm, coolant device, feed roller conveyor, L 3.000 mm - No. 51, Pos. 19
On behalf of the entitled persons we sell an automatic band saw machine from Forte.
Nttaz
The general terms and conditions of Lüders & Partner GmbH apply.
AMADA band saw machine TYPE HA-500 universal machine for the cutting of metals of all kinds: bars, form tools, tubes - individually and in the bundle.
In automatic mode, an optimum cutting performance is achieved by the secondary is reduced to a minimum times. Piece counter with length measuring device works which cuts HA-500 individual without supervision in the series area of the large - single by the equipment of the machine can, but also to be made. The prefix option of the integrat...
Cutting capacity round 90° 300 mm
Cutting capacity square 90° 420x200 mm
Delivery time approx. 2 weeks from order placement
cutting capacity 90°: round 300 mm, square 240 mm, rectangular 420 x 200 mm
cutting capacity 45°: round 240 mm, square 230 mm, rectangular 270 x 140 mm
cutting capacity 60°: round 170 mm, square 170 mm, rectangular 170 x 170 mm
cutting speed: 35/70 m/min
Motor: 0.9 / 1.5 kW
belt dimensions: 3,270 x 27 x 0.9 mm
working height: 835 mm
Hsseneo7
Dimensions: 2.800 x 2.000 x 1.90...
with additional automatic saw arc suppression
for 45 ° right up to 60 ° left miter cuts
Cutting capacity 90 ° round: 225 mm
Section 45° right: 145 mm
Cutting capacity 45 ° left: 160 mm
Cutting capacity: 60 ° left: 90 mm
Engine: 0.7 / 0.81 kW
Cutting speed: 46 / 92 m / min
Blade: 2450 x 27 x 0,9 mm
Dvwdri
Weight: 240 kg
---
!!! Not the right machine found? Tell us your production task and we will help!
---
make MEP, type SHARK 260, year 1995, carbide belt guide, coolant system, chip box, feeding roller conveyor - no. 46, item 55
On behalf of the entitled persons we sell a band saw semi-automatic machine from MEP.
Bk3hlw23
The general terms and conditions of Lüders & Partner GmbH apply.
Cutting capacity round 90° 280 mm
Cutting capacity square 90° 330x240 mm
Delivery time approx. 2 weeks from order placement
cutting capacity 90°: round 280 mm, square 240 mm, rectangular 330 x 240 mm
cutting capacity 45°: round 225 mm, square 215 mm, rectangular 230 x 140 mm
cutting capacity 60°: round 140 mm, square 140 mm, rectangular 140 x 130 mm
cutting speed: 35/70 m/min
Motor: 0.9/1.5 kW
belt dimensions: 3,120 x 27 x 0.9 mm
working height: 835 mm
Dimensions: 3,220 x 1,950 x 1,900 mm
M8apg2...
Technical data:
Cutting diameter round steel: max. 420 mm
cutting diameter square steel: 420 x 420 mm
Cikvvaeqy
saw blade length: 5800 x 38 x 1,3 mm
Sawing speed: 19-130 m/min.
working height: 710 mm
motor power: 7,5 kW
Chip conveyor
dimensions (length x width x height): approx. 3000 x 2300 x 2000 mm
Weight: approx. 3,3 to
accessories:
roller conveyor
new frequency converter: SIEMENS
The seller is not liable for writing or data transmission errors. The machine is in optics, technology and wear a...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.