Screw compressor with V-belt drive and control
Engine power: 11kW
Final pressure: 10bar
delivery quantity: 1,50m³/min
Screw compressor in technically and optically perfect condition
Engine has been remounted.
Hoses and great service new.
Operating hours: 19016
Load hours: 17016
Year of construction: 2000
Screw compressor with v-belt drive and control
Motor power: 22kW
Discharge pressure: 10 bar
Quantity: 3, 13 m ³/min
Screw compressor in technically and optically flawless condition
Compressor stage and engine were stored newly.
Hoses and great service new.
Hours of operation: 19016
Last hour: 17016
Year of construction: 2002 more
Emulsion splitting plant, oil water separation system
The cost-effective and permanently reliable
The problem is usually the oil / water
Separation of dispersed condensates. That
purified water complies with the statutory
Regulations on the channel launch
Dimensions 750/600HH950 mm
Weight 80 kg more
Alup compressor SCR 30
- height: 125cm
- width: 125cm
- depth: 75cm
- weight: 600kg
Good condition fully functional can be inspected and tested on site.
Shipping also abroad.
Basically I would like to point out that in order to avoid misunderstandings, the article can be inspected and tested under power before purchase. Please ask questions before purchase to avoid any ambiguity.
If you have general questions or would like to make an appointment for a viewing, I can be r... more
Speed-controlled screw compressor
Engine power: 20kW
Discharge pressure: 5 - 13 bar
Delivery amount: 0.76-3, 55 m ³/min
New storage engine and compressor.
Frequency inverter renewed at 37,000 hours of operation. more
stroke volume: 325 l / min
effective delivery at 15 bar:
Speed: 955 rpm
Drive motor: 380 V, 2.2 kW
Boiler capacity: 250 l
Tank operating pressure: 15 bar
Tank requirement: 1600 x 500 x 1000 mm more
We offer a complete screw compressor system consisting of
1 screw compressor Allegro 15 - 10 Year of manufacture 2015
1 screw compressor Allegro 26 Year of manufacture 2018
1 piece refrigerant dryer ADQ 216
1 piece refrigerant dryer ADQ 312
1 piece compressed air tank v 100 zinc
1 ring system Airnet DN 50 approx. 100 metres with 10 tapping stations/ outlets with wall connection boxes
Various compressed air filters, see photos
further details gladly by email.
All documents, maintenance repo... more
1 used very well-preserved piston compressor with tank, compressed air cold dryer and oil-water separation system
Piston compressors ALUP HL 111012-350
Compaction pressure 10 bar
Flow rate 900 dm m³/min
Drive motor 7,5 kW
Sound pressure level 82 dB(A)
Number of cylinders 2
Single-stage Yes, dimensions L x W x H 1450 x 600 x 1200 mm
Weight 280 kg
Boiler ALUP SN-Nr. 303314
Content 350 l
Maximum pressure 11 bar
Compressed air cold dryer ALUP DTA 71, serial No. 96/10040/04... more
Compressor piston compressor screw NKZV212N
2-tier - 2 zylindrig
Suction capacity 210 L / min.
Fuel tank capacity 250 litres
Engine power 2 HP
Maximum pressure 15 bar
Compressor RPM 990 RPM.
TÜV tested (currently up to October 2018)
TÜV inspection manual and operating instructions available
Compressor was worked until the last minute (carpentry) more
CONTEC-COMPRESSORS * * * * * *
PISTON COMPRESSOR FROM ALUP,
ON PRESSURE VESSEL 500L,
11 KW MOTOR,
CAPACITY 1.07 M3/MIN,
AT A PRESSURE OF 15 BAR,
FULLY EFFICIENT COMPRESSOR.
ON SALE I HAVE MORE COMPRESSORS,
DEHUMIDIFIERS AND WELDING EQUIPMENT.
WE PROVIDE SERVICE AND REPAIR OF COMPRESSORS
CONTEC-COMPRESSORS * * * * * * more
Screw compressor ALUP 16PLUS ALLEGRO;
the machine on;
machine with the inverter.
yield: 0.76-3, 03 m3/min;
engine power 16 KW;
5-13 pressure bar;
mileage 9473 h;
the year 2003; more
Used billet shear ERFURT ScK 1600 for cutting round (max. 235mm) or square (max. 220mm) material. The machine is equipped with a separation table for the input material and a 6000mm long roller table. The material sections can be between 100 and 1000mm long. The billet shear ERFURT ScK 1600 is still installed and can be demonstrated under power.
Pressing capacity in t: 1600
Total consumption in kW: 110
Height above floor in mm: 4200
Stroke per minute: 15
Overall size (lxbxh) in mm: 11... more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.