Used Anchor Fastener for sale (1,095)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany Cjdpfx Asmhh Dheb Derg - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing Cedpomkixwsfx Ab Dorg - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. Crsdpfod Tbbdjx Ab Deg When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Crodpfx Abjd Tqalo Djg - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm Crsdjfdkbhjpfx Ab Deg 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) Crjdpfxefdkb Tj Ab Djg - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Credpfjmhhf Sjx Ab Dsg Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Credomhhl Hopfx Ab Dsg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Credpemhh Dtofx Ab Deg - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. Crsdsmidyfepfx Ab Deg When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Crsdpeh Ek Dasfx Ab Djg Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm Crsdeqt Dmyjpfx Ab Dsg - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Crjdpfsguk A Hox Ab Djg Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. Csdpfxefdkb Us Ab Djrg The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth Credpfxsmhhyaj Ab Dsg 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Codpfsmhhypjx Ab Dorg - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Cjdomhh Anepfx Ab Dorg The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Credpfxsmhh Dzj Ab Dog - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Codpfoguk Dkex Ab Derg Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. Crjdpsguk Dvjfx Ab Dsg We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Cjdpfxozvykxj Ab Derg Manufacturer: Molteni. Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a member of our sales team.

Condition: used, Used Netzsch approximately 1,000 litre stainless steel vertical jacketed mixing vessel. Unit has welded flat top and bottom heads. External jacket rated 3 bar working pressure. Unit has top entry stainless steel anchor type agitator with drive and stainless steel high shear agitator with drive. Unit is mounted on (4) legs with forklift attachment. Specifications: Capacity: 264.2 gal Type Of Heads: Flat top and bottom heads Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 4 legs with forklift attachment Crjdpfx Aozun Hrob Deg

Condition: used, Used BCD Engineering Ltd stainless steel vertical reactor body. Approximately 4,000 litre nominal capacity. Unit measures approximately 1,800mm diameter x 1,700mm straight side. Has welded dished top and bottom heads. Internal rated 10 bar / full vacuum design pressure at -29 to 200 deg.c. External stainless steel coil jacket rated approximately 324 litre capacity, 6 bar / FV design pressure at -29 to 200 deg.C. Unit includes top mounted stainless steel anchor type agitator but no drive/gearbox currently fitted. Unit mounted on side support lugs. Cedszimv Iepfx Ab Dorg

Condition: used, Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: Crodpjymaz Hsfx Ab Deg 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels.  Full hydraulic raise/lower with electrical panels, touchscreen PLC controls, CIP pumps, diaphragm product discharge pumps, both vessels on load cell system. Manuals/drawings included. Technical specification below for each main process vessel.   Vessel 1 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, contra rotating mixer 1.1kw, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.   Vessel 2 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.

Condition: used, empty load weight: 6,372 kg, maximum load weight: 32,628 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2026, loading space length: 13,620 mm, loading space width: 8,388,607 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,700 mm, color: black, Year of construction: 2026, Equipment: ABS, Tare weight: 6372kg, GVW: 39000kg, DIN EN 12642 (code XL) certificate, Loading area length: 13,620 mm, Loading area width: 8,388,607 mmTyre size: 385/65 R22.5, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle front, Pallet box (double): For 30 Euro/ 20 ISO pallets., Electronic Brake System EBS, Toolbox, Ferry lashings, Sliding roof: Also to rear., 1x15 and 2x7 pin plug, Antispray, Telematics system, Side rave with curtain fastening profile and 3 pairs side posts. Punched load securing side rave. 2 wheel chocks with holders. SCB LED multifunctional lighting system, 12/24V, with dynamic indicators. LED side marker lights coupled with indicator. 1 pair of LED tracking lights. Lashing eyes, 16 pairs. Electronic braking performance monitoring system (EBPMS). TrailerConnect service package CTU Module 2: Alert. CTU module 2: Trailer status and alerts (36 months). TrailerConnect EBPMS (36 months). TrailerConnect data storage (12 months). TrailerConnect tyre press. monit. system. Plastic document box on front bulkhead., Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Crjdpfxozviqze Ab Dog