Used horizontal bending machines - bending force 0t to 25t for sale (46)

Condition: used, Euromac PB 350S Horizontal bending machines Euromac horizontal bending machine. with related equipment. serial number 90/52901/12, Oct 1990. With large amount of tooling as shown in images below. Ksdpfozh Rf Dox Anxsnb

Condition: used, Steinweg B32 Bar bender serial number 3701, Year 1990, original machine tool manual, and tooling as per photographs. Knodpfx Ajzh Rfwenxob

Condition: new, pressure 20.0 t stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm total power requirement 2.2 kW motor 400 Volt 50 Hz oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : Kjdpfjxabtvjx Anxjnb - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, Year of construction: 2026, HSBM 2020-20 SB – Manual Swivel Bending Machine HSBM SB – Manual swivel bending machine in a heavy-duty design with segmented upper tools Easy to operate Segmented upper tools Swivel bending function with secure clamping of the workpiece through pre-tensioning of the upper die Heavy, compact welded construction For simple bending with precise adjustment of the bending angle using a stop with a scale Particularly low maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note regarding technical data: Sheet thickness max.: Performance data refer to material with a tensile strength of 400N/mm²; Bending capacity stainless steel: Factor 0.75; Bending capacity aluminum: Factor 1.2; Hardened upper tools are required for bending stainless steel. Model: HSBM 2020-20 SB Article no.: 3772920 Technical data Working width max.: 2,020 mm Bending capacity max. steel 400 N/qmm: 2 mm Bending capacity max. steel 400 N/qmm without die extension: Bending capacity max. steel 400 N/qmm with die extension: Bending capacity max. stainless steel: 1.5 mm Kjdpocnxc Nsfx Anxonb Bending capacity max. aluminum: 2.4 mm Bending angle max.: 135° Segment division Clearance between upper and lower die max.: 120 mm Length: 2500 mm Width: 710 mm Height: 1500 mm Weight: 1,020 kg Location: Ex works - free loading -

Condition: used, Max. Bending Capacity: 220 kN (22t) Knjdszuzh Nopfx Anxob Tool height: 120 mm Weight: about 500 kg

Condition: new, pressure 10 t Ksdjymf Skopfx Anxenb stroke max. 200 mm bending capacity max. - flat 150 x 6 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 1,1 kW weight of the machine ca. 400 kg required space 500 x 900 x 1150 mm The Gerd Wolff HP 10 is a hydraulic horizontal press machine with many many possible combinations. Whether it's bending tubes, punching profiles or cutting sheet metal, with the right accessories the HP 10 is a multifunctional machine among presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 10 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: as good as new (ex-display), Year of construction: 2026, Hydraulic horizontal bending machine - Model T 200 with stop - feeding machine - stroke length 185 mm - Weight 500 kg Bending capacity up to flat bars ST 37 is 200x12 mm (with appropriate tool) Knedpfezzk D Tox Anxsb with punch R 5 and die V 100 mm

Condition: used, Year of construction: 1972, total length: 1,800 mm, total height: 1,400 mm, total width: 2,250 mm, Colour: Green Empty weight: 2.000 kg Price: On request - Year: 1972 - Documentation available: No - CE certificate present: No - Control: Conventional - Transport dimensions: 1800mm x 2250mm x 1400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kjdpszm N Risfx Anxenb Lukas van Rossum

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 13960, overall weight: 3,340 kg, Göteneds K25-25 A1200 Kombi – Metalworking Machine For sale is a robust and reliable combination machine from the Swedish manufacturer Göteneds. This machine is ideally suited for industrial metalworking applications, distinguished by its sturdy construction and precise operation. Technical Data: Manufacturer: Göteneds (Sweden) Model: K25-25 A1200 Kombi Working area (SS 1312): 2550 x 25 mm Serial number: 13960 Year of manufacture: 06/1994 Weight: approx. 3,340 kg Description: The machine is designed for demanding applications, offering high stability and dependable performance in continuous operation. Its massive construction makes it particularly well-suited for precise machining processes. Condition: Used, fully operational (more detailed condition information can be added – e.g., "can be inspected under power" or "regularly serviced"). Ksdpoy D A Hnefx Anxonb Special features: High-quality machine made in Sweden Excellent build quality Industrial-grade design

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm Knedpfx Anjfg Th Aexeb -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. Knodpfx Anjzgci Eexsb The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Year of construction: 2009, condition: good (used), machine/vehicle number: 133, Offer 18291 Kjdjg Ewi Nopfx Anxonb Hydraulic horizontal bending and straightening machine Technical data: - Bending force: 100 kN / 10 t - Adjustable bending force: 0 - 100 kN - Stroke: 0 - 150 mm - Working width: approx. 200 mm - Stroke speed: 0 - 0.6 m/min - Tool height: up to approx. 100 mm - Bending capacity: - with MW 100 prism, flat material up to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Straightening capacity Wy at a straightening block distance of 1 m: 100 cm³ - Drive: 400 V / 1.1 kW - Space requirement: approx. W 1100 x H 1000 x D 650 mm - Weight: approx. 400 kg

Condition: new, Year of construction: 2026, Maximum pressure: 20 tons Kedpfx Aohgib Nonxjnb Stroke length: 200 mm Maximum speed: 10mm/sec Return speed: 20mm/sec Work table: 480x1060 mm Working height: 900 mm Oil tank: 10 Liter Maximum workpiece height: 200 mm Strip capacity: 200x12 mm Pipe capacity: 48x4.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

Condition: new, Year of construction: 2026, Stierli Bending Machine 120HE Horizontal bending machine, with bending force of 12 tons tool height 130 mm Kjdpfxsid Izgs Anxsnb stroke 0-170 mm bending capacity for flat steel 130x12 mm pipe bending for steel pipe up to 1 1/2" suitable for minor straightening operations demonstration machine, year of manufacture 2026

Condition: new, Year of construction: 2025, pressing force: 20 t, – Capacity 20 tons Knsdpfx Ansvt Eunexsb – Bending capacity 200 x 12 mm – Stroke 200 mm – NC touchscreen control – Foot control – Emergency stop – 400V

Condition: new, Year of construction: 2025, pressing force: 10 t, - Capacity 10 tons - Bending capacity 150 x 6 mm - Stroke 200 mm - NC touchscreen control - Foot pedal - Emergency stop - 400V Kodpsu Sl U Aefx Anxenb

Condition: used, Year of construction: 1998, Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Ksdpouxc Rbefx Anxenb operation manual

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 130 mm, pressing force: 12 t, bending force (max.): 12 t, Stierli bender 120HE horizontal press Horizontal bending machine, manual control with angle fine adjustment. Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 12 tons tool height 130 mm Knedpfx Aoflc R Denxob Stroke 0-170 mm stepless Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: like new (used), Year of construction: 2024, tool height: 130 mm, sheet thickness copper (max.): 20 mm, bending force (max.): 12 t, Stierli bender 120 CNC Horizontal bending machine, Siemens controller Working force 12 tons Very universal, for flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools. tool height 130 mm Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Backgauge length stop 1000/2000mm Program memory 200 programs Bending sets 20 bends Knsdpfxeflc R Us Anxob Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: new, pressure 10 t stroke 200 mm table-size 450 x 450 mm working speed: 10 mm/ sec. work height max. 940 mm toolpiece height max. 150 mm total power requirement 1,1 kW 150 x 6 mm weight 0,4 t dimensions 1,15 x 0,5 x 0,9 mm Horizontal bending machine with: - NC control - Dual footswitch Knjdpfst Eacasx Anxob - Set of standard tools

Condition: new, pressure 20 t stroke 200 mm Knjdpfxevn U Due Anxeb table-size 550 x 550 mm working speed: 10 mm/ sec. work height max. 940 mm toolpiece height max. 200 mm total power requirement 2,2 kW 200 x 10 mm weight 650 kg dimensions 1,1 x 0,6 x 1,22 mm

Condition: as good as new (ex-display), Year of construction: 2026, Horizontal Bending press Zopf - model T 200 with automatic backgauge - programable backgauge 1000 mm with - year of construction 2026 - demo model - length of stroke 185 mm - weight 500 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 100 mm Touch screen with programming of the stroke and backgauge demo model Knsdsgrydbopfx Anxjb

Condition: excellent (used), Year of construction: 1967, operating hours: 4,336 h, I sell a decent massive pipe bender in very good condition Weight of the bender 4.5T+ about 1T wheels to work. Kedpfoudlymex Anxenb

Condition: as good as new (ex-display), Year of construction: 2026, Horizontal Bending press Zopf - model T 200 - year of construction 2026 Knjdpfx Anody Igzjxsb - demo model - length of stroke 185 mm - weight 450 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: new, Horizontal bending machine Fastech FP 20 Description • Press force: 20 tons • Stroke: 185 mm • Max. tool height: 200 mm • Flat bar, over the top edge: 200 x 12 mm Kodsfg Evdepfx Anxjnb • Working speed: 10.0 mm/s • Return speed: 10.0 mm/s • Working height: 930 mm • Table: 480 x 1060 mm • Total power consumption: 2.2 kW • Motor: 400 volts, 50 Hz • Weight: 530 kg • Dimensions L-W-H: 1150 x 480 x 1200 mm • Oil capacity: 12.0 l Features: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made of hardened and ground forged steel • Digital display for stroke adjustment • 1 tool set • Dual foot switch