Section benders shaft diameter over 71mm for sale
9
I - beam section - flat steel 140 x 140 x 13 mm
I-beam section - upend 120 x 120 x 13 mm
L-beam 130 x 130 x 12 mm
round bar steel 85 mm
Pcn9v
bending capacity - flat iron 125 25 mm
flat steel 65 x 65 mm
including various rollers
I-beam section - flat steel 220 bei Dm 1200 mm
I-beam section - upend - mm
B7ktizjz
angular steel - leg outwards 110x110x14 bei Dm 1000 mm
angular steel - leg inwards 80x80x10 bei Dm 1000 mm
flat steel flat 100 x 20 bei Dm 1000 mm
T-steel / side out 120x120x13 bei Dm 1200 mm
U-iron on the x-axis 22 bei Dm 1200 mm
pipes 102 x 6 bei Dm 900 mm
round material 75 bei Dm 700 mm
square material 60 x 60 bei Dm 600 mm
bending speed 3,5 m/min
No. - Rolls 3
Drive 7,5 kW
shaft diameter 125/135 mm
weight 6,...
10
I-beam section - upend 100 x 25 (d 1000) mm
bar material dia. max. 114,3 x 3,6 (d 1200) mm
L-beam 120 x 13 (d 1200) mm
square material 60 x 60 (d 800) mm
Poj0v
I - beam section - flat steel 160 x 40 (d 800) mm
bar material - diameter 75,0 (d 1000) mm
roll diameter 350 mm
turning speeds 0 - 5,0 m/min.
total power requirement 15,0 kW
weight 3200 kg
range L-W-H 2000 x 1400 x 1500 mm
Furnishing:
- heavy / robust ring bending machine
- 3x motor-driven rollers
- hydraulic delivery of the side rolle...
Flat bar 250 x 40 mm Flat bar on edge 160 x 20 mm Square 80 x 80 mm Round (solid) 90 mm dia. Angle bar 120 x 120 x 13 mm UPN 300 (internal) Tube 140 x 3,5 mm
Control: PQ 10
Hydraulic drive on 3 rolls Hydraulic adjustment of support rolls Horizontal/vertical
Equipped with: 2 set of tube bending rolls 1 set of universal rolls Special equipment for bending HE profiles Machine appears as new, and has only been running 20 hours.
Bl2xe8eyhv
4
Make: HAEUSLER
Type: HPR-12
Large package extra rolls over 10 sets
Side roll guiders double
Specifications
US Standard Metric
Horizontal and vertical
Horizontal
Number of rolls
3
Resistance moment
46 CM³
Capacity flat
100 x 20 x R1000 mm
Capacity Tube
102 x 6 x R 900 Ø x mm
Capacity bar
60 x 60 x R 600 mm
Capacity T-Profile
120 x 120 x 13 x R1200 mm
Dimensions
Length
4.500 mm
Width
1.700 mm
Height
1.500 mm
Weight
4.000 kg
Large package extra rolls over 10 sets
Side roll guiders double
Horizo...
7
tube diameter max. 3" Zoll
wall strength 3 mm
pressure 16 t
Puo8iy
weight of the machine ca. 45 Kg
dimensions 0,8 x 0,6 x m
0,65 x 0,60 x 0,20 m
4
angle steel/side length 130 x 12 / Ø 1800 mm
double T-iron on the x-axis 300 mm
U-iron on the x-axis 300 mm
flat iron St. 52 - upend 140 x 30 mm
diameter 1400 mm
flat iron St. 52 - flat 220 X 50 mm
diameter 1000 mm
tube diameter 139,7 x 7,1 mm
diameter 1500 mm
double T-iron on the x-axis HEA 300 mm
diameter 1400 mm
Cocztaia
bending speed 0 - 5 m/min
section modulus 100 qmm
roll diameter max ca. 540 mm
total power requirement 22 kW
weight of the machine ca. 8,5 t
dimensions of the machine ca. 2,5...
I - beam section - flat steel 300 x 50 / 1000 mm
I-beam section - upend 150 x 40 / 1500 mm
L-beam 160 x 160 x 19 / 2500 mm
roll diameter bis 500 mm
double T-iron on the x-axis 1360/1800 mm
U-iron on the x-axis U 400 mm
min. dia. 2300 mm
65 x 10 mm
min. dia. 2000 mm
angular steel - leg inwards 140 x 15 mm
min. dia. 1500 mm
93 x 93 x / 1000 mm
Bnblcnb8hl
roll speed 4,5 x 9 m/min.
0 400 mm
shaft diameter 120/230 mm
total power requirement 22 kW
weight of the machine ca. 13 t
range L-W-H 3 x 2,3...
4
bending angle max.: °
work height max.: 1100 mm
voltage: 380 / 50 V
total power requirement: ca. 15,1 kW
weight of the machine ca.: 4,5 t
dimensions electric cabinet LxWxH: 1,2 x 0,64 x 1,4 m
dimension machine xH: 1,5 x 1,6 x 1,3 m
Machine is currently in technical department!
The machine works on two gear stages: 0-4 rpm and 0-6.5 rpm.
- 1x bending roller and 2x drive rollers
- Bending roller vertical adjustment 140mm, profile 70 x 25mm
- 2x support rollers ( right/left ), 45 ° position, swi...
1
Shaft diameter: 80roll diameter: 245
3 motor driven rolls
strong welded steel construction
Njtbx
lower rolls hydr. adjustable
digital read-out for lower rolls positions on seperate control panel
lateral rolls adjustable in 3 axes
horizontal and vertical operation
for- and backward drive
machine and equipment according to the CE regulations
Technical specifications:
shaft diameter:80 mmroll diameter:245 mmdriven roll:3motor power:5 kWspeed:6 m/ding capacities (section / min. diameter):
flat s...
8
Technical data:
2 rollers hydraulically adjustable
3 rollers driven
Power main engine: 5,5 KW
Machine can work horizontally or vertically
diameter drive shafts: 105 mm
diameter standard attachment rollers: 275 mm
Working speed: 0 - 7 m/min
Bending capacities:
Flat iron: 100 x 25 mm
B0co37fplh
angle steel: min. 100 x 100 x 12 mm
T-profile: min. 120 x 120 x 13 mm
Round steel: 70 mm
Round tubes: 100 mm
Square tubes: 90 x 90 x 5 mm
CE mark
Dimensions (length x width x height): approx. 1500 x 1500 x ...
2
Section bending machine heavy duty model shafts 160 mm
complete with rollers for pipe bending
size mm pipe 78 _ 90_ 100 _115_ 141 _ 154 _ 168 mm pipe bending
Included the universal set of rolls adjustable for symmetric and asymmetric profiles section maximum capacity
Flat bar on edge 140 x 35 mm
Full iron bar 90 mm
B0800tjarx
Angle iron 140 mm
H beam easy way 160 mm
T-section 150 mm
C-section easy way 180 mm
Tensioning brackets on the 3 rolls
Rolls rotation gear unit power electric...
11
Profile bending machine
Make Schäfer
Type SPVS 25-100
with digital display
with one universal standard roller set
Shaft diameter 120 mm
hydraulic roller feeder
hydraulic roll feed
with different rollers for bending tubes
operable from the control panel
Machine can be set up for either horizontal or vertical bending.
Bending capacity : maximum resistance moment of the profiles to be bent
25 cm/3
11 kw
380 volts
Weight 5,9 to.
Bhbm0wu7nn
9
Ring bending machine, Profile bending machine
Bfgpwt30
Manufacturer Häusler
unfortunately I have no technical data.
machine has a total weight of 12t
Technical specifications:
Bending capability: Ø 76.1 x 2.3 mm
Max. bending radius: 190 mm
Max. bending speed: 12 °/s
Bending accuracy: ± 0.1 °
Connected load: 3.5 kW
Bending speed: 12o/sek
Voltage: 400 V - 50 HZ
Dimensions:
Length: 7100 mm
Width: 720 mm
Height: 1450 mm
Weight: 1500 Kg
Tools Available: Included
Tool rack included.
Bending tools including sliding and driven guide counterform, tightening counterform, and bending shape:
For diameter steel tubes:
42.40 mm Radius: 2xD
48.30 mm Radi...
1
Shaft diameter: 140- 120roll diameter: 380
3 driven rolls (hydromotor and planetary gear)
strong welded steel construction
lower rolls hydr. adjustable
digital read-out for lower rolls positions
plane rolls
lateral rolls (forward-backward hydraulic, rest manual)
horizontal and vertical operation
double foot pedal for- and backward drive
machine and equipment according to the CE regulations
Technical specifications:
Performances:
Iqgz7bz
flat steel vertical position:120x25 mm / 1.300 mm; 50x1...
7
Technical data:
2 rollers hydraulically adjustable
3 rollers driven
shaft diameter: 140 mm
roller diameter: 400 mm
lateral hydr. controlled arm correctors left and right
Cu9zwkpce
bending capacity flat steel: 150 x 20 mm - see attachment
motor power: 15 kW
mobile control panel with digital display
dimensions (length x width x height): approx. 2050 x 1900 x 1850 mm
weight: approx. 7 to
The seller is not liable for writing or data transmission errors. The machine is in optics, technology and wear ...
4
Hydraulic profile bending machine make ROUNDO type R 4
Year of manufacture 1978
technical data:
max. section modulus b. tensile strength 42 - 50 kg 30 cm³
roller diameter 275 mm
infinitely variable roller speed 0,0 - 7,0 m/min.
Performance examples L 90 x 9 Drm. 900 mm
T 90 x 10 drm. 900 mm
flat 100 x 18 drm. 800 mm
flat upright 200 x 30 drm. 800 mm
Square bars 55 x 55 dia. 550 mm
Round bar 60 dia. 600 mm
Double T INP 160 dia. 800 mm
U-iron UNP 160 dm. 800 mm
Weight approx. 2,4 t
Outer di...
8
- Axle diameter 80 mm
- Lower two rollers are moved hydraulically
- Three rollers driven
- Hydraulically adjustable guide rollers
- 2 Digital readouts
- Brake motor
- Horizontal/vertical use
- Mobile control panel
- Emergency stop
Pouo9
- Documentations
- 400V
5
4-roller hydraulic profile bending machine
Hezinger-BendingLine, model HR4P, model HR4P090
Shaft diameter 90 mm
Roll diameter 260 mm
Motor output 5.5 kW
Maximum rolling speed 6 RPM
Machines dimensions 1,700 x 1.450 x 1,200 mm
Machines weight 2,800 kg
Bending performance HR4P080:
Ikiaghf
Flat steel upright: 30 x 10 mm with Ø 300 mm
80 x 20 mm to Ø 800 mm
100 x 10 mm to Ø 2000 mm
Flat steel flat: 60 x 5 mm with Ø 300 mm
125 x 25 mm for Ø 600 mm
Rectangle solid material: 15 x 15 mm to Ø 380 mm
45 x...
5
Profile bending roll Parmigiani - Model Planet 40 year 2002 - Output shafts size 175 mm
Planetary 3 configuration with pre-bending - 3 rolls driven hydraulic with axial gear unit each
Hydraulic power unit self enclosed. Machine reversible can work with shafts vertical/horizontal
Universal set of rollers 9 pieces - Size of the rollers 470 mm
Special set of rolls for pipes 2”-3”-4”-5”-6”-8” x 3 pieces each size.
Lateral arms correctors left/right side control hydra...
1
Shaft diameter: 110- 100roll diameter: 315
Bxcub9v0
3 driven rolls (hydromotor and planetary gear)
strong welded steel construction
lower rolls hydr. adjustable
digital read-out for lower rolls positions
plane rolls
lateral rolls (forward-backward hydraulic, rest manual)
horizontal and vertical operation
double foot pedal for- and backward drive
machine and equipment according to the CE regulations
Technical specifications:
Performances:
flat steel vertical position:100x25 mm / 1.500 mm; 40x1...
6
bending machine model HB 80
- manufacturer KB
- two roller driven
- digital readout with memory
- standard roller set knurled
- horizontal and vertikal
- main motor 4 kw
- hydraulic motor 4 kw
- shaft diameter 80 mm
- workingspeed 4,5 rpm
- bending capacity round tube 100x3,0 mm mild steel
- flat iron 100x15 mm
- solid 60 mm
- weight 1650 kg
- 400 volt 50 Hz 3 phase
HS-Code: 8462 2998
Bd8zhzfzna
6
Technical data:
- 2 mot. driven rollers
- Mot. infeed of the middle roller
- shaft diameter 75 mm
Xd222ruhb
- shaft length approx. 200 mm
- roller height adjustment via threaded spindle without dismounting
- working speed 5 + 10 m/min
- Bending capacity - L. and T - iron outside at R 1200 mm 90 x 9 mm
- L - iron inside R 1200 mm 75 x 10 mm
- I flat R 1000 mm I 160 mm
- U - iron leg outwards R 1000 mm U 140 mm
- U - iron leg inwards R 1200 mm U 140 mm
- flat iron flat R 450 mm 160 x 25 mm
- flat ...
6
- Axle diameter 80 mm
- NC steering
Bx27f0eaps
- Lower two rollers hydraulically moved
- Three rollers driven
- 2 Speed
- 2 Digital readouts
- Brake motor
- Horizontal/vertical use
- Mobile control panel
- Emergency stop
- Documentations
- 400V
14
pyramidal straightening machine with 450 rol diameter
Flange ext. ø 309mm, thickness 18mm (material iron)
Flange ext. ø 360mm, thickness 35mm (material iron)
Flange ext. ø 330mm, thickness 35mm (material iron)
Flange ext. ø 170mm (material teflon)
Flange ext. ø 309mm, thickness 18mm (material iron)
Flange ext. ø 360mm, thickness 35mm (material iron)
Flange ext. ø 330mm, thickness 35mm (material iron)
Flange ext. ø 170mm (material teflon)
Horizontal and vertical:Horizontal
Shaft Ø: 130mm...
9
Shaft diameters 80-100-80mm
Hydraulicly adjustable
Digital readout
Incl: set of steel rollers ø 60mm
Plastic rollers± ø30-46-65-76mm
E9g8rhhj0
Several disks and spacers
1
angle iron / side length: 80 x 80 x 8double T-iron over x-axis: IPN 120 IPN 80U-iron over x-axis: UPN 140total power requirements: 4weight approx.: 1700messurements (LxWxH): 1.450 x 1.000 x 1.400
Bdf3amz8r8
6
Ring-profile bending machine Akyapak APK 81
I-steel - upright 100 x 20 (d 2100) mm
raw diameter max. 100 x 3 (d 3000) mm
angle steel 80x80x8 (d 2000) mm
square steel 50 x 25 x 2 (d 600) mm
I - steel - flat 120 x 30 (d 600) max.140b mm
solid material - diameter 60,0 (d 1000) mm
tool holder 80,0 mm
Speed 4,2 m/min.
Weight 1.600 kg
Dimension L-W-H 1240 x 1375 x 1540 mm
Equipment:
hydr. roller drive
planetary gear feed of the 2 lower rollers
for extra small bending radii
hardened tool holder (42CrMo...
7
Hydr. ring-bend bending machine
offer number: 19101
Make: STOELTING
Type: RP 25
Machine No: M 1103
Year of construction: 1984
Technical data:
- 3 motor driven rollers
- hydr. infeed of the two bottom rolls + the two
- Straightening rolls / Pitch rolls
- the machine can be used horizontally or vertically
- Material strength / yield strength 240 N/mm²
- Max. Resistance torque 25
- Bending capacity :
- Flat material - vertical 80 x 20 mm Ø 800 mm
- flat 140 x 30 mm Ø 700 mm
- HEA 120 Ø 1000 ...
6
OSTAS PROFILE ROLLER
Brnzgnrode
TYPE OPK-85
- Axle diameter 80 mm
- Lower two rollers are moved hydraulically
- Three rollers driven
- 2 Speeds
- 2 Digital readouts
- Brake motor
- Horizontal/vertical use
- Mobile control panel
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
3
Shaft Ø: 200mm
Number of rolls: 3
Stroke X-Axis: 700mm
Bslteuwvib
Capacity flat: 120 x 50 x 2000 mm
Capacity Tube: 133 x 6,0 mm mm
Capacity bar: 80 x 80 x 2000 mm
Capacity T-Profile: 120 x R 1500 mm
Capacity HEA-Profile:320 x R 1600 mm
Working speed: 4500 - 9000 mm
Adjustment siderolls:550
Length: 3.000 mm
Width: 2.500 mm
Height: 2.500 mm
Weight: 5.100 kg
Please Note: The information on this page has been obtained to the best of our ability and bel...
3
Technical characteristics:
Resistance torque 100 cm³
Main shaft diameter 130 mm
Diameter of lateral shafts 130 mm
Outside diameter of bending rolls 410 mm
Adjustable rolling speed 0-6 m/min
Installed power 18,4 kW (25 PS)
Length 1.900 mm
Width 2.200 mm
Bd3k0eijb2
Height 1.900 mm
Weight 5.720 kg
Standard equipment:
Hydraulic adjustment of the side rollers
3 rollers driven (3 hydraulic motors + 3 planetary reduction gears)
Independent side profile guide rollers, adjustable in 6 directions, fully...
10
Bending machine ZOPF
ZB 140/3 H 2
- compl. with standard roller set,
- digital readout for left and right axis
- hydraulic side guides
- three smooth driven rollers
- planetary movement of bending rolls
- working with both vertical and horizontal shafts
- built according to the CE rules
- bending capacity steel up to 110x25 mm
-shaft diameter 110 mm
-Rolls diameter 350 mm
-working speed 5 m/min
-installed power 7,5 kw
-weight 2950 kg
-module max Wcm3 157
Bdnmytf2vz
-400 Volt 50 Hz. 3 ph.
7
Technical data:
2 rollers hydraulically adjustable
3 rollers driven
Power main engine: 5,5 KW
Machine can work horizontally or vertically
diameter drive shafts: 105 mm
diameter standard attachment rollers: 275 mm
Working speed: 0 - 7 m/min
Digital display
Bending capacities: see attachment
CE-mark
dimensions (length x width x height): approx. 1500 x 1500 mm
Weight: approx. 2,5 to
The seller is not liable for writing or data transmission errors. The machine is in optics, technique and wear accord...
5
Hydr. ring-bend bending machine
Offer number: 20061
Make: SCHÄFER
Type: SPVS 65-140
Machine No: 2106-147
Year of construction: 1986
Technical data:
Bhsqw0hslz
- hydr. 3 roller drive, vertical + horizontal use
- hydr. symmetrical + asymmetrical feed
- the two lower rollers
- Material strength / yield strength 240 N/mm²
- max. moment of resistance 65 cm³
- Bending capacity :
- Flat material upright R 625 125 x 25 mm
- Square R 350 70 x 70 mm
- Round R 350 85 mm
- T- leg to the outside R 700 ...
3
4-roller hydraulic profile bending machine
Hezinger-BendingLine, model HR4P, model HR4P090
Shaft diameter 90 mm
Roll diameter 260 mm
Motor output 5.5 kW
Maximum rolling speed 6 RPM
Machines dimensions 1,700 x 1.450 x 1,200 mm
Machines weight 2,800 kg
Bending performance HR4P080:
Flat steel upright: 30 x 10 mm with Ø 300 mm
80 x 20 mm to Ø 800 mm
100 x 10 mm to Ø 2000 mm
Flat steel flat: 60 x 5 mm with Ø 300 mm
125 x 25 mm for Ø 600 mm
Rectangle solid material: 15 x 15 mm to Ø 380 mm
45 x 45 mm a...
10
Hydraulic side roll support
Optical readout position side rolls
Roll set for UPN 140
Roll set for T 120
Roll set for L 120
Roll set for Square 70 x 70
Horizontal and vertical:H + V
Shaft Ø: 120mm
Number of rolls: 3
3cnkxlg
Horizontal: Yes
Vertical: Yes
Resistance moment: 60CM³
Capacity flat: 130 x 20 x R 1200 mm
Capacity Tube: 114,3 x 7,1 x R 1000 Ø x mm
Capacity bar: 70 x 70 x R 600 mm
Capacity HEA-Profile: 120 x 58 x R 3200 mm
Working speed: 3500 + 7000...
4
New three rolls angle roll Roundo R3 with tools, digital readout and remote control.
Be2uh9i9cd
3
For sale is the pictured profile bending machine incl. accessories. The machine runs perfectly and can be inspected under power.
The shaft diameter is 80 mm.
Btr8xmps2e
3
Rollers diameter: Ø110 - Ø100
Engine power: 11 Kw
Tkoldx7f
Rotating speed: 9m/sec
Height: 1650
Width: 1340
Length: 1750
Weight: 3360
Standard accessories:
- CE
- mechanical lateral supports (Z-U-C axis)
- hydraulic up and down movement of the top roller
- top roller with digital display
- 1 set of hardened and ground rollers of special steel
- hardened lateral supports
- horizontal working possible
- vertical working possible
- all rollers driven by motor & gearbox
- electrical and hydraulic pro...
10
Offer 11550
Mot. ring bending machine / bow former
Technical data:
- Asymmetric infeed of the upper shaft
Hmqooqz
- 3 driven shafts
- Narrowest bending radius (depending on profile) approx. 240 mm
- Throughput speed approx. 6 m/min
- Roll diameter approx. 284 mm
- Centre distance of the lower shafts can be adjusted asymmetrically on both sides
- drive 400 V / 0,8 kW
- with:
- separate control panel
- digital actual value display
- weight approx. 350 kg
- space requirement approx. W 800 x H 135...
2
Tube and profile bending machines
Shafts Ø 120 mm
Rollers Ø 390 mm
Bending speed 4 m/min
optimal adaptation to a wide range of profiles due to a modular standard roller system
Dxzf7u
3-fold hydraulic drive
hardened rolls and shafts
adjustable overload protection
hydraulic feed of the lower rolls with digital display
with hydraulically adjustable straightening rollers
horizontal or vertical processing possible
hydraulic components from renowned manufacturers
working range
shafts Ø 120 mm
rollers ...
9
Technical data:
2 rollers hydraulically adjustable
3 rollers driven
Bending moment: 48 cm/3
Roll diameter: 360 mm
Power main engine: 7,5 KW
Machine can work horizontally or vertically
Dimensions (length x width x height): 2.0 x 1.3 x 1.9 m
Bngozvaw3x
Weight: approx. 5,5 to
Accessories:
various roles
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear and tear according to its age; used machines are sold without any warranty.
11
Ostas profile ring bending machine OPK 85
Technical specifications:
Nylk2
- tool holder, shaft: 80mm
- tool: 245mm
- working speed: 6m/min
- Engine: 4kw
- Dimensions L-W-H: 1020x1460x1350mm
- Weight: 1800kg
- 3 rollers driven
- Hardened standard rollers
- Hardened and ground tool holder, shaft
- Mobile control panel
- Horizontal and vertical working position
- Side angle guide rollers
- Digital displays (2pcs.)
- Brake motor
- According to CE-Norm
2
section modulus: 40-70 W/cm3
roll shafts diameter: 105 mm
E8viiovmo
Roller outer diameter: 310 mm
Electrical power: 15 HP
rolling speed: 7 m/min
Price on request.
Machine is delivered with commissioning and training in German.
We are DAVI trade and service partner for North, West and East Germany.
4
ELEKTRISCHE PROFILBIEGEMASCHINE F 15
- 01-08-002
Lieferzeit: sofort
Nummer: 01-08-002
Hersteller: Profilbiegemaschine
Typ: F 15
MASCHINENDATEN
Baujahr: ca. 1975
L x B x H: ca. 800 x 600 x 1000 mm
Gewicht: ca. 150 kg
Yr9aao
Guter Allgemeinzustand
Maschine hat Bruch im Maschinenkörper, dieses wurde fachmännisch repariert, Maschine voll funktionsfähig
TECHNISCHE DATEN
Steuerung: konventionell
Max. Biegeleistung (Stahl): ca. 150 x 10 mm
Max. Biegeleistung (Edelstahl): ca. 150 x 5 mm
Anzahl d...