Angle gearbox buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
heavy gear, bevel gear Translation 1:16 Drive shaft hollow shaft 38 mm Output shaft shaft 48 mm -with claw coupling Hsmub8n -1 piece of gear available Award pieces Dimensions 470/240/H445 mm Weight 59 kg / piece more
1
CABINET PRESS / 3 to. Press pressure, through bevel gear *** UNUSED SHOW MACHINE *** "100% in germany made" - angle gearbox and cylinder 3 to print - exact, winkelgenaü edge, banding, body & frame press - Einspannmasse: (H x W) 1600 x 2900 mm - Einspannmasse: (H x W) at frame 1600 x 2600 mm supply equipment (Fig. contains partially or special equipment): - 4 press units with bevel gear-cylinder, - 1 page printing with two-angle gear - 90 degree stop - suspension Optional accessories: - Two side... more
5
heavy gear, bevel gear, planetary gear Translation 1:1800 Drive shaft hollow shaft 24 mm Output shaft shaft 75 mm 0gxuzso -1 piece of gear available Award pieces Dimensions 440/220/H245 mm Weight 52 kg / piece more
5
heavy gear, bevel gear, planetary gear Dxlitzgp Translation 1:650 Drive shaft hollow shaft 32 mm Output shaft hollow shaft 60 mm -1 piece of gear available Award pieces Weight 40 kg / piece more
1

ANGLE ROLLS PULLMAX Z31

North Carolina, United StatesUnited States dealership location
518 km
1975
used
Elect./Voltage: Gmnponi2s PULLMAX Z31 ROLL BENDING (ANGLE ROLL) --Angles - leg out: 3" x 3" x 3/8" - minimum diameter 36" --Angles - leg in: 2.5" x 2.5" x 3/8"-minimum diameter 48" --Minimum angle leg out: 1" x 1" x 1/4" - minimum diameter 18" --Minimum angle leg in: 1" x 1" x 1/4" - minimum diameter 18" --Flats on edge: 3" x 9/16" - minimum diameter 20" --Minimum flats on edge: 1" x 1/4" - minimum diameter 14" --Flats on flats: 5" x 1" - minimum diameter 16" --Minimum flats ... more
12
Serial No. 52064 Control Siemens 840D Colour Graphic Ccontrol Table Size 1700mm Table Speeds Low Range 0-30 rpm, Middle Range 30-74 rpm, High Range 74-155 rpm Swing 2000mm Height Under Cross Slide 1800mm Height Under Turret Twin Ram Cross Travel 1500mm Cross Slide Rise & Fall 800mm Bciegnr9yg Ram Rise & Fall 1200mm Vertical Traverse Cross Rail 1500mm, Vertical Travel of Each Ram 1000mm Input Main Motor 75 kW Fitted with 2 x 12 Station Automatic Tool Change Equipment 17 x Quick Change Toolholder... more
5
Angle to the workpiece clamping Dimensions 200/320/H220 mm Blicplzu -25 mm thick Groove 20 mm -gefräste interface Weight 22.7 kg more
7

Angle / cube Stolle

Babberich, NetherlandsNetherlands dealership location
6320 km
1980
ready for operation (used)
Technical data T NutengrößeT 28 mm Lot T-Nuten5 x Distance from T-slots / Sprung125 mm Bch8h9suyh Amount / number 400 mm Width 500 mm ... more
6
used from spare parts Wuwziwux Jaw width: approx. 200 Jaw height: approx. 125 mm Total depth: 150 mm Long hole spacing Center / Center: approx. 150 mm Ø approx. 14 mm Price is plus VAT free loaded bearing casting Changes / errors in the specifications and subject to prior sale more
6

angle table MAHO [...]

Leipzig, GermanyGermany dealership location
6734 km
1990
used
clamping surface area: 760x445 mm Lsr9l no. of flutes: 7 Stück table - swiveable: li/re je 20 Grad table rotating: 360 Grad weight of the machine approx.: 284 kg space requirements of the machine approx.: 0,9x0,6x1,0 m machine table with under frame, moveable with 4 rotatable wheels vertical mounting area : 350x250mm T-slot comparable according DIN 650 and 508 a=14mm h=24mm b=24mm c=10mm more


angle gear...
daily

New machines via email!

Stay updated!
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Dsidj9p TAURING 2RT/100-H Angle Bending RollSpecifications: --Bending Capacities – Mild Steel: - Angles, Leg Out (Min. 63" Dia.) 4" x 4" x 3/8" - Angles, Leg In (Min. 78.74" Dia.) 3" x 3" x 5/16" - Smallest Angle, Leg Out (Min. 27.56" Dia.) 2" x 2" x 1/4" - Smallest Angle, Leg In (Min. 35.43" Dia.) 2" x 2" x 1/4" - Channels, Flanges Out (Min. 78.7" Dia.) 9-1/2" x 2-3/4" ... more
5
working area: mm Punching capacity:600 kN punch diameter: biggest flat bar:200 x 15 mm Bb9hjtaxqh Smallest flat bar:40 x 5 mm biggest angle:130 x 15 / 130 x 200 x 15 mm smallest angle:40 x 5 mm length max.:12 m mm Mubea punch and shear line for punching and shearing of angle and flat material. The punch and shear system consists of a material feed system with a clamp measuring system for length measurement. The Mubea angle punching and shearing line has a hydraulic shear unit, a punching unit... more
5
Angle to the workpiece clamping Dimensions of 196/80/H100 mm -12 mm dia. -T-slots 8 mm -gefräste interface Weight 3 kg Js8p8q more
1

Angle / cube Asquith UK

Babberich, NetherlandsNetherlands dealership location
6320 km
ready for operation (used)
Technical data Amount / number of Platten4 mm Width: 1000 mm Tclcbxu9 Height 1020 mm more
7
Professional automatic packaging machine for large products of a renowned European manufacturer. Suitable, for example, for the packaging of food, technical articles, print and paper products, household and toys and textiles. -Automatic welding frame movement with an electric drive. -Automatic rest foil winding. -Foerderband with hand crank continuously adjustable in height. -Perforierung 3 adjustable needle rings possible. Roll holder can be moved. Adjustable product insert. -Usable we... more
2

Angle welding ExpertPac EKL 455 PT

Murr, GermanyGermany dealership location
6656 km
ready for operation (used)
Data on the machine Welding frame format: 550 x 400 mm Max power: 9 kw Voltage: 380 v Tunnel opening B x H: 400 x 200 mm Tunnel length: 700 mm Machine dimensions L x W x h: 2580 x 1000 x 1500 mm Weight: 400kg Vshstq maximum working power pack/h: 600-900 Max half-tubular film width: 600 mm Working height: 910 mm Max packaging capacity: 900 PCs. / hour more
1

ANGLE ROLLS BERTSCH AR25

North Carolina, United StatesUnited States dealership location
518 km
1996
used
Elect./Voltage: Dvhpchz BERTSCH AR25 Hydraulic Angle Bending Roll -- Pipe3-1/2" SCH. 40 to 48" min. dia. --"T" leg-in 5" X 9.5# to 192" min. dia. -- Flat plate 1-1/2" x 7" to 23" min. dia. -- Square bar 2-1/2" to 25" min. dia. -- "T" leg-out 5" X 9.5# to 192" min. dia. -- Angle leg-in 4" x 4" x 3/8" to 60" min. dia. -- Die diameter 15" -- Angle leg-out 5" x 5" x 3/8" to 68" min. dia. -- Plate on edge 1" x 4" to 40" min. dia. -- Rolling speed 0' to 16' per min -- "I" beam on web... more
6

angle table TOS- TRENCIN FNG

Leipzig, GermanyGermany dealership location
6734 km
used
Tprvzupbo clamping surface area: 630x400 mm no. of flutes: 8 rotatability of the table - manual/mechanic: 360 v. Hand ° weight of the machine approx.: 175 kg Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25mm; c=9mm foot plate: size 380x300mm with 6 clamping slots WxL=14x20mm more
4
Angle to the workpiece clamping Ddjqcbn Dimensions W/H/L 160/105/160 mm -25 mm thick -T-slots 10 mm -gefräste interface Weight 7 kg more
9

Angle / cube EUROPEAN

Babberich, NetherlandsNetherlands dealership location
6320 km
ready for operation (used)
DIMENSIONS Length 1200 mm Width 500 mm Ss20b0 Height 800 mm more
6
surface area 600 x 250 mm no. of flutes 3 groove width mm turnability of the table - man. & mec. ° distance table - spindle center mm Fk2m8uf table - tiltable +/- ° total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
5
working area: mm Punching capacity: kN punch diameter: 9pv0yxmpc Spare parts for a FICEP a16.36N In this Ficep spare parts package the following parts are included: control panel and monitor, 3 servomotors for the X, Y and Z axles (Type 4452200033) and a Mitrol CNC control. more
1
Elect./Voltage: 230/460/3/60 Bbvrfnogpt PULLMAX Z31 ROLL BENDING (ANGLE ROLL) --Angles - leg out: 3" x 3" x 3/8" - minimum diameter 36" --Angles - leg in: 2.5" x 2.5" x 3/8"-minimum diameter 48" --Minimum angle leg out: 1" x 1" x 1/4" - minimum diameter 18" --Minimum angle leg in: 1" x 1" x 1/4" - minimum diameter 18" --Flats on edge: 3" x 9/16" - minimum diameter 20" --Minimum flats on edge: 1" x 1/4" - minimum diameter 14" --Flats on flats: 5" x 1" - minimum diameter 16" --M... more
6

angle table WMW 600x400

Leipzig, GermanyGermany dealership location
6734 km
1990
used
table length: 600 mm table width: 400 mm T-slots: 7 Stück inclination: re/li=0-45 Grad Qnz0ms7gd rotation movement: 0-180 Grad weight of the machine approx.: 197 kg Universal Angle Table - Tiltable 45 ° on one side - Turn 360 vertical with handwheel over scale - Table top clamping plate with T-slots to DI 650 and 508: a = 14mm; h = 26mm; b = 24mm; c = 10.5 mm; Center stand = 50mm Details on mounting area: - 2 T-slots are suitable: W: 14mm, L: 25mm, thickness: 10mm - 2 clamping points - center... more
4
Angle to the workpiece clamping Dimensions 275/150/H215 mm -24 mm thick -T-slots 17 mm -gefräste interface Q278otzx Weight 14 kg more
1

Angle / cube Asquith UK

Babberich, NetherlandsNetherlands dealership location
6320 km
ready for operation (used)
Technical data Amount / number of Platten4 1600 mm 805 mm G8zttzzja Height 1200 mm more
6
surface area 240 x 700 mm no. of flutes 5 groove width 12 mm turnability of the table - man. & mec. 30 ° swivelling range 2x45 Grad total power requirement kW weight of the machine ca. 0,10 t Vqltl3 373/5000 This is a pivotable angeled table as an attachment to a milling machine DECKEL. Rotatability of the table in vertical axis for both Directions 30 degrees. Tilting of the table in horizontal axis (vertical to table slide)in two directions 45 degrees. Pivotability of the table horizontal... more
2

Angle Benders unbekannt 100 x 10 mm

Borken-Burlo, GermanyGermany dealership location
6360 km
used
1 used angle Benders cast steel adjustable bending angle stop for mounting on bench or work table Performance 100 x 10 mm Bbacnppati With this angle Benders, flat, square and rods can be bent cold or warm. more
4

angle table STANKOIMPORT WT500

Leipzig, GermanyGermany dealership location
6734 km
used
table length: 500 mm table width: 200 mm weight of the machine approx.: 52 kg Dimensions (HxWxD): 500x210x280 mm Angular Table (Sinus Table) for a vertical installation on a Milling Machine - table 500x200mm - inclinable right + left with 45° - tiltable front and rear 30° - rotatable to left and right 20° - without displayed T-slote plate!!!(underneath on the pictures!!!) - T-slots 4 pcs 14 mm width - installation clamping area: 270x170mm - clamping distance vertical 100mm - clamping distance h... more
5
Angle to the workpiece clamping Dimensions 180/70/H100 mm -18 mm thick -T-slots 12 mm -gefräste interface Weight 3.5 kg Lkbsp more
20

Angle / cube Asquith L 800 + L 500

Babberich, NetherlandsNetherlands dealership location
6320 km
1990
ready for operation (used)
Technical data T NutengrößeM18? mm Quantity x hole vertical T-Nuten21 Bch7zmjbcw Distance to get T-slots / SprungHole = 100 mm Amount / number of Platten2 + 550 mm Widt... more
2
surface area 350 x 650 mm no. of flutes 5 groove width 14 mm swivellable 360 ° Total height 370 mm clamping slots 4x Nutenbreite 14mm distance 135 mm total power requirement 0,00 kW weight of the machine ca. 0,20 t dimensions of the machine ca. m Qmb2iyjcj pivotal angled table to apply on a milling machine type DECKEL FP3 in both direction 30° degree. pivotability of table round the vertical axis (parall to tablesledge) in both directions 180° degree. more
1
Knife length 210 / 250 mm maximum sheet thickness 6 mm Delivery promptly, subject to prior sale Blade length: 250 mm Notching depth: pre-cut no: 210 mm with pre-cut: 250 mm S09ua2ej maximum sheet thickness: 6 mm Angle: 90 ° Motor: 4 kW Weight: 620 kg New price: € 6.820,-- more
5

Hammel VB 950 gearbox Bondioli & Pavesi Bondioli & Pavesi S8377001000

NA Barneveld, NetherlandsNetherlands dealership location
6274 km
as good as new (ex-display)
Remanufactured Hammel VB950 gearbox with additional modifications / improvements to both the inside and outside. Further information for sale, Hammel VB950 DK gearbox, Hammel VB750 DK gearbox, we also review gearboxes for machines from Lindner, Arjes, Morbark Enz. Hci99ip8y more
6

Finishing Mangle FEYEN KREFELD 222.54 / 5400

Krefeld, GermanyGermany dealership location
6378 km
2016
used
Working widths 5400 mm Roller width 5600 mm Number of rollers 2 Stück Supporting roller - dia 490 mm Fbsylozcg Roller covering - soft rubber 75 Grad shore Swimming roll - dia 340 mm Roller covering - soft rubber 75 Grad shore Pressure line 35 N / mm Pressure total 19 to Cloth guiding system Breithalter,1 Leitwalze Liquor trough with guide roll heb + senkbar Drive side nach Auftrag Operting side nach Auftrag Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm required power 30 m/mi... more
4
Angle to the workpiece clamping Dimensions 200/109/H200 mm -31 mm thick -T-slots 17 mm -gefräste interface Weight 10 kg Q3xzh0x73 more
5

Angle punching line Voortman V550

Köln, GermanyGermany dealership location
6416 km
1999
used
working lenght:6.000 mm pressing power:180 t Punching capacity:1000 kN cutting capacity:Flach - max. 22 mm cutting capacity:Winkel - max. 150 x 150 x mm punch diameter:30 mm number of punch tools:3 Stk. / pcs. quick change toolholder: connected load frequency:3 x 400 V control:VACON 110 accessories::Zufuhrwagen mit Materialk weight of the machine ca.: t Voortman V500 is a punch shear system for flat steel and angle profiles. Horizontal and v... more
2
surface area 1000 x 440 mm no. of flutes 5 groove width 16 mm flute distance 90 surface area senkrecht 600 x 220 mm no. of flutes 2 groove width 16 mm flute distance 90 distance work spindle /surface of the table 0 - 546 mm Sqrwx8na8 total power requirement 0,00 kW weight of the machine ca. 0,20 t dimensions of the machine ca. m table to ad to a milling machine type FP3L more
1
Blade length 250 mm maximum sheet thickness 4 mm Delivery promptly, subject to prior sale Blade length: 250 mm Bchv8olaam maximum sheet thickness: 4 mm Angle: 90 ° Motor: 3 kW Weight: 520 kg New price: € 5.390,-- more
1

Fork angle brackets AMF M20/22

Borken-Burlo, GermanyGermany dealership location
6360 km
used
AMF, chamfered fork brackets Cxgzesfu for M20/22 Length inside 180 mm Weight approx. 1730 g more
2
- With 7 spindles - Spacing 32 mm - Bobex coupling Lbgyitb 3 pieces available more
4
Angle, clamping, clamping angle to the workpiece clamping -23 mm thick Long holes 25 mm Lj3bt -gefräste interface technical drawing for the photos Dimensions 405/230/H300 mm Weight 36 kg more
4

Clamping angle for boring machine

Schwäbisch Gmünd, GermanyGermany
6701 km
ready for operation (used)
Clamping angle for boring machine 90 G Clamping surface 885 x 900 mm T-slots 7 22/100 mm Yrtwjo Dimensions LxWxH 885 x 655 x 900 mm Condition: used 1004129 more
4
Metalsystem angle profile front to back support for Palet racking 9mu2otvfv Shelf depth: 1590 mm or 1000 mm Do you need shelves or accessories in other compositions or designs, please contact us. We offer a wide range of new and used shelves as well as accessories and support in planning. Other accessories such as: buffers, bumper guards, crash barriers, push-through guards, chipboard, mesh panel, depth bars, spacers, end stops available. Shipping: Please contact us giving your po... more
3

Router table - angle table MAHO MH 600 P

More Maho Mh 600
Menden, GermanyGermany dealership location
6442 km
1982
good (used)
Clamping surface: 400 x 610 mm. T - slot: 14 mm. With water trough Groove distance: 45 mm. M9osj Weight: approx. 120 kg. Suitable also for other machines. The platen can be seen in consultation and is available immediately. Have other spare parts by MAHO, MH 600 P, BJ. 1982, Quill feed gear and milling, milling head TNC 135, div. spindles with mother, hydraulic system, autom. Lubrication system, Main engine, feed ecetera, just ask, maybe I can help you. Please also my other listings. ... more
1
Angle of drilling plant used (blue) W2qqgwnv7 Floor area approx. 1500 mm x 500 mm Height approx. 1250 mm, width 1500 mm with holes and thread M20 in the hole distance of 80 mm t = 50 mm Clamping device for machine tools more
2
Drill gearbox Nottmeyer With 13 spindles Spacing 25 mm Bobex coupling Qmgqsvlv8 13 pieces available price per unit more
3
Angle to the workpiece clamping Dimensions 160/210/H200 mm Clamping width 40 mm -gefräste interface Weight 6 kg R8siptlgc more


angle gear...
daily

New machines via email!

Stay updated!

to

to

Edit search
ANGLE GEARBOX
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close