heavy gear, angular gear
Lianf
-Translation: 1:1
-Drive shaft hollow shaft: 42 mm
-Output shaft hollow shaft: 38 mm
-Number: 3 gear units available
-Price: per piece
-Weight: 40 kg/piece
length 800 mm
width 450 mm
height 800 mm
total power requirement kW
weight of the machine ca. 0,5 t
dimensions of the machine ca. m
Nlpoh
length 800 mm
width 500 mm
height 1000 mm
power capacity kW
weight of the machine ca. 0,3 t
dimensions of the machine ca. m
Biugubaa3v
2 units
table length 645 ( 350 ) mm
table width 18,5 mm
table height 1045 mm
T-slots 40 x 18 x 8,0 mm
weight ~ 650 kg
Furnishing :
- 2x pieces of robust clamping angles (T-shape)
Wiep7bdr
- rear ribs
- 7x T-slots 40 x 18.0 x 8.0 mm per bracket
length 605 mm
width 1350 mm
height 2510 mm
weight 1,9 t
Two heavy mounting brackets photographed lying down,one bracket has three
grooves on the long leg, the holes are through holes.
B8fnstut
Machine dealer with own stock of 2500 m².
length 690 mm
thread M16
height 1020 mm
weight of the machine ca. 360 kg
Bt8uek8vto
Angle table with breadboard table LxWxD: 1020x690x40 mm
Fixing LxW: 330x690 mm
Thread: M16
Weight: 360 kg
heavy gear, angular gear
-Translation: 1:16
-Drive shaft hollow shaft: 38 mm
-Output shaft shaft: 48 mm
-with claw coupling:
-Number: 1 piece gear available
-Price: per piece
-Dimensions: 470/240/H445 mm
Hsmub8n
-Weight: 59 kg/piece
weight 5 t
height 4.300 mm
Be7yxbnrh2
width 600 mm
Clamping angle, angular table with T-slot clamping tower, clamping plateclamping surface: 700 x 550 mmmounting surface: 500 x 550 mmT-slot spacing: 180 mmT-slot width: 22 mmtable thickness: 70 mm - cast steel, both supports ground at a 90° angle - central fixing surface (275 mm) with 18 mm guide groove, equipped with 2 guide stones - fixing surface with 4 18 mm holes, hole spacing 380 x 300 mm - total dimensions L x W x H 700 x 550 x 500 mmWeight: 220 kgguter Zustand
D8f9s2h
length 250 mm
width 170 mm
height 250 mm
groove width 18 mm
Cgo80imo
weight of the machine ca. 29 kg
dimensions of the machine ca. 250 x 170 x 250 mm
length 1050 mm
width 500 mm
height 1000 mm
weight of the machine ca. 600 kg
Bq0k8tb7xh
2 pieces available, the price is for one piece.
Machine dealer with own stock of 2500 m².
length 995 mm
width 500 mm
height 30 mm
weight of the machine ca. ca. 300 kg
Angle table with hole ratchet
Table LxWxD: 995x500x30 mm
Fixing LxW: 430x500 mm
Bt8t2m2m0q
Weight: 300 kg
Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears
-Translation: 1: 2
-Drive shaft: Ø 22 x 35 mm
-Dimensions: 180/110/H110 mm
-Weight: 11 kg
Iejigcr
width 1300 mm
height 2500 mm
depth 1300 mm
thickness of clamping plate 50 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
I9n299u
table length: mm
table width: mm
table load: t
width: 655 mm
depth: 500 mm
height: 500 mm
weight of the machine ca.: 197 kg
dimension L-W-H: 420 x 655 x 500 mm
model: angular frame with double stiffness
vertical plate:
- size W: 655 x H 500 x thickness: 40mm
- with clamping holes, long holes and center hole
foot plate:
7xngvcyrf
- size: B:655 x L:420 x thickness : 40mm
- with long holes
length:3000 mm
width:1500 mm
size clamping area:3.000 x 1.500 mm
size base area:1.500 x 1.200 mm
weight of the machine ca.:6210 kg
The STOLLE clamping angles are manufactured in a stable,
box-shaped cast construction
made of dense special cast iron with steel addition.
The outer surfaces are machined according to DIN 876/III,
the edges are angular to it.
The clamping surface contains 14 T-slots according to DIN 650-28H12
at intervals of 200 mm as well as additional 660 threaded holes M 24
with ...
length 1200 mm
width 900 mm
height 1500 mm
weight of the machine ca. 1 t
Cmbhc32e
Machine dealer with own stock of 2500 m².
throat / mm
tool adaptor HSK100
power requirement / kW
Buyft7x38p
heavy gear, angular gear
-Type: E 880 G
-Shaft: Ø 20 mm
-Length: 50 mm
-Flange: Ø 125 mm
-Dimensions: 260/280/H160 mm
-Weight: 16 kg
Nnbln
width 1150 mm
height 2150 mm
depth 850 mm
total power requirement kW
weight of the machine ca. t
Bkpnyzb82x
dimensions of the machine ca. m
grinding diameter: 320 mm
grinding length: 400 mm
centre height: 160 mm
Grinding-wheel diameter: 700 mm
workpiece weight: 350 kg
control: PS TESLA NS - 915
total power requirement: 24 kW
Yqaa3c
weight of the machine ca.: 5.5 t
space requirements of the machine approx.: 3.5x2.2x2.8 m
bevel cut-in grinding machine
with loading magazine
On sale as is! As spare part donator
DOCUMENTATION AVAILABLE
throat 450 mm
Ptxoki
tool adaptor 60 ISO
power requirement 100 kW
spindle distance 720 mm
speeds 12 - 450 U/min
total power requirement kW
weight of the machine ca. 2 t
dimensions of the machine ca. m
180° ANGLE TRANSFER with dryer
Type GT 180/3500/5500
Infeed and outfeed section of the panels with two motorised roller conveyors
with centre distance 3158 mm mm, useful length 3500 mm.
Transverse transfer of the panels consisting of a pneumatic lifting system
movable with belt conveyor units.
Fork and roller pitch 167 mm.
Electrical system with control cabinet.
Version with motors in Exg.- ATEX cat. 3G.
Housing cover with laminar airflow for GT/180 /3500/5500.
With supply air fan, supply air ...
length 1000 mm
width 800 mm
height 630 mm
weight 460 kg
T-slot - width 50 mm
Clamping table, clamping plate, T-slot table
Bt8xan0abd
Dimensions
Table length: 1000 mm
Table width: 800 mm
Table height: 630 mm
T-slot length: 50 mm Weight: 460 kg
Ball bearings, bearings, bearing set, accurate, radial ball bearings, roller bearings
-Type: 71944CTP2HUL
-Lubricating groove
Be0t8n2ifx
-Bore: Ø 220 mm
-Outer diameter: 300 mm
-Width: 75 mm
-Number: 4x bearings available
-Price: per piece
-Weight: 14 kg
width 1300 mm
depth 1300 mm
height 2500 mm
thickness of clamping plate 50 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Oog7d
length: 250 mm
width: 400 mm
height: 305 mm
weight: je ca. 56kg
dimension L-W-H: 250 x 400 x 305 mm
- clamping surface vertical = H: 305mm x W: 400mm
- clamping surface foot L: 250mm x W: 400mm
- T-slots according to DIN 650: a = 18.0mm; h = 30.0mm; c = 11.5 mm; with 2x horizontal and 4x vertical; center distance Horizontal slot = 152mm and vertical slot 90mm
- clamping area of the foot: L: 250mm x W: 400mm
Bbzeauska9
Tenon/slot
- Saw
Bxafk8ywqp
- Slotting spindle
Longitudinal machining
- Milling cutter
- Glazing bead saw
Technical characteristics
Max machinable length 3200 mm
Minimum machinable length 200 mm
Max width 200 mm
Min width 40 mm
Maximum workpiece height 130 mm
Depth with max Ø to tenon 320 mm: 105 mm
Tenoning carriage speed min / max 0/100 m / min
Min / max profiling speed: 3/15 m / min
Tenoning:
1: sawing end cut
5.5 hp (4 kW)
Saw Ø 400 mm
2: tenoning router
Counter bearing 50 x 620 mm
15 hp (11.3 kW)
Max tool Ø 320 mm
Axle stroke 575 mm
Automatic splinter guard
3: solenoid chuck w...
length 800 mm
width 800 mm
S8nnwh
height 1000 mm
Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears, worm gears
Blk2ryxmzc
-Ratio: 72.0: 1
-Drive shaft: Ø 24 x 35 mm
-Hollow shaft: 38 x 140 mm
-Dimensions: 240/135/H235 mm
-Weight: 26 kg
width 1500 mm
height 1480 mm
depth 800 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
2kgdifdj
length: 655 mm
width: 800 mm
height: 1000 mm
depth: Tiefe/Länge: 655 mm
weight of the machine approx.: 641 kg
Clamping surface is rough-machined
good used condition, slight signs of use
- T-slots according to DIN 650:
Bewiezzeuu
- a=28; h=50; b=50; c=21 mm
- centre distance = 160mm
Clamping surface of the foot: depth: 655mm x width: 800mm
Panel sizing machines - Angle panel sizing machine
Bwrcip2ldr
Technical characteristics
Technical characteristics :
- Max machinable length 3200 mm
- Minimum machinable length 200 mm
- Maximum width 200 mm
- Minimum width 40 mm
- Maximum workpiece height 130 mm
- Depth with max Ø to tenon 320 mm: 105 mm
- Tenoning carriage speed min / max 0/100 m / min
Bb0i2cz
- Min / max profiling speed: 3/15 m / min
Tenoning:
1- end cut saw
5.5 hp (4 kW)
Saw Ø 400 mm
2- tenoning router
Counter bearing 50 x 620 mm
15 hp (11.3 kW)
Max tool Ø 320 mm
Axle st...
depth 1100 mm
height 5200 mm
length 1100 mm
Bt8vz9skjc
weight 7120 kg
Gears, angular gears, stin gear, angular gear, transmission gear
-Translation: i = 1: 1
-Drive shafts: dimensions see pictures
-Dimension: Ø 225 x 180 mm
Bk0mbxrnpc
-Weight: 9.6 kg
width 1500 mm
height 1500 mm
depth 800 mm
Thickness 58 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Brhjnhh377
length: 640 mm
width: 800 mm
height: 1000 mm
Bs0ikyk3km
depth: Tiefe/Länge: 640 mm
weight of the machine approx.: 570 kg
Clamping surface is rough-machined
good used condition, slight signs of use
- T-slots according to DIN 650:
- a=28; h=50; b=50; c=21 mm
- centre distance = 160mm
Clamping surface of the foot: depth: 655mm x width: 800mm
Numerical Control WinCut Plus EXCELLENT optimizer Working dimensions 4500 x 2200 mm Max blade projection (mm) 115 Rear lifting table N. 17 pliers on the pusher carriage Retractable TT side aligners "Quick Change" system for the quick release of the blades without tools Scoring group (max blade diameter / power) 200 / Hp 2 Scoring adjustment carried out by two electric motors controlled by an encoder Main blade group (max blade diameter / power) 400 / Hp 15 Ascent of the blades on prismatic guide...
I sell the window angular centre Weinig Unicontrol 6
Year 2000.
Blvrc3gytc
Moulding heads OERTLI.
Outfeed turning table included
Available immediately.
The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle po...
Gear, angular gear, Stinrad gear, angular gear, transmission gear, flat belt drive, belt pulley, PTO - belt drive, flat belt angle gear
-Flat belt drive with: PTO shaft
-Angular gear ratio: 1.25: 1
-Pulley: Ø 385 x 90 mm
-Drive shaft: Ø 35 x 90 mm
-Dimensions: 1100/380/H440 mm
Bi7tuxutwx
-Weight: 74 kg
width 300 mm
height 1200 mm
depth 510 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
There are 2 pieces Width: 300 mm Height: 1200 mm Depth: 510 mm
About usmore than 500 machines in the warehouse over 8500 m² storage area,
Brhjp7cpsg
crane capacity 70 tmore than 1000 items accessories for your workshop You want
to sell machines production lines or your company, then talk to us.
length: 1800 mm
width: 2000 mm
height: 3000 mm
depth: Länge/Tiefe 1800 mm
weight: ca. 10,3 t
There is still 1 piece of angle plate available for sale. All others are sold.
Steel construction, welded, surface finished.
Size of the angle: W: 2000 x D: 1800 x H: 3000mm
Clamping surface vertical: H:3000xB:2000mm
Holes on/in clamping surface 400 x 50 and 200 x 53mm, with M30 threaded holes and through holes
Clamping surface base stand: W:2000 x D:1800mm
Clamping hole Ø 51mm drilled in corners of t...
Numerical Control Osi Optiplanning optimizer for the optimization of cutting patterns Os Labeling machine Cutting length 4500 mm Cutting width mm 2200 Blade protrusion mm 123 Automatic panel loading through rear lifting table Double automatic aligner with pneumatic cylinders Additional mobile side aligner on the transverse plane Bakelite table with air curtain system along the cutting line for delicate materials N ° 1 mobile front table in bakelite with air curtain system for unloading the panel...
Angular panel sizing machine
Jbya8ksby
5
from the dismantling of a Mikron WF21C milling machine:
Fixed angular table / machine table with T-slots (14mm)
Clamping surface 700x355
Nik7l
condition: used
Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container
2pll8q
-Manufacturer: Homag
-Nummer: 4 pieces available
-different designs
-Price: per piece
-Dimensions: 300/170/H190 mm
-Weight: 16.8 kg