Used Atlas 1304 M for sale (442)

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Lodsxbd Raopfx Ac Aohh Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge Ljdpfsb A I Insx Ac Aehh -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket Lhjdpfx Aob A I Rcec Aeh -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg

Condition: ready for operation (used), functionality: fully functional, power: 114 kW (155.00 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 25 kg, tire condition: 50 %, axle configuration: 2 axles, number of seats: 1, Year of construction: 2015, operating hours: 8,454 h, machine/vehicle number: 250M301296, Equipment: UVV, additional headlights, air conditioning, cabin, crane, hydraulics, trailer coupling, 6.20 + 4.80 m incl. generator Sorting grab Polyp grab Lifting magnet all with quick coupler also available: Lhsdpfx Astucngsc Aeh Atlas 230MH | 2011 | 6.80 + 5.00 | Polyp grab Liebherr A904C | 2011 | 6.60 + 5.00 | Polyp grab

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). JAB Hydraulic Breaker / Hammer / MS03 / in stock & immediately available Price: €3,690.00 net / €4,391.10 gross - Weight (kg): 336 - Length with chisel (mm): 1,500 - Chisel diameter (mm): 70 Equipment: - incl. MS03 adapter plate Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various attachments in our warehouse, all immediately available! Lsdpfx Aoyxadmec Aehh Mr. Herden (phone) will be happy to assist you. Upon request, we will gladly provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: JW10GC = More information = Intended use: Construction Unladen weight: 336 kg Please contact Marius Herden for further information.

Condition: good (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 Ljdpfx Ajwrcq Noc Aehh - Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/s - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Required space approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

Condition: reconditioned (used), functionality: fully functional, operation weight: 200 kg, Year of construction: 2022, Equipment: hydraulics, EPIROC SB 202 hydraulic breaker overhauled With Lehnhoff MS03 mounting plate Hydraulic hoses with couplings and 1x point chisel Lodpfx Acottv Sxe Ashh Operating weight 200 kg Oil flow 35 l/min - 65 l/min Operating pressure 100 bar - 150 bar Impact frequency 850 - 1800 impacts/min Diameter of insertion tool 65 mm Working length of the tool 300 mm Carrier weight class 2.5 t - 6 t Hydraulic input power, max. 17 kW Guaranteed sound power level 118 dB

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Lsdpfx Ael Tn Epjc Ashh

Year of construction: 2020, condition: new, machine/vehicle number: 311345882, Atlas Copco Secoroc DTH drill pipe 102 114mm unused 4x 102mm / L= 5000mm 4x 114mm / L= 6000mm Lsdpsmwittofx Ac Aehh 3x shank adapters 114mm 1x drill bit 140mm Additional information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 822 kW (1,117.61 HP), For sale is an oil-free air compressor from Atlas Copco, model ZH6-5, in good, fully operational condition. The unit comes from industrial use and is ideally suited for applications requiring high standards of clean compressed air. The compressor is robustly constructed, making it particularly suitable for industry, food production, pharmaceuticals, or any other sector where oil-free air is essential. An inspection can be arranged by appointment. Technical specifications: • Manufacturer: Atlas Copco • Model: ZH6-5 • Year of manufacture: 2001 • Max. operating pressure: 8.8 bar • Power: 822 kW Ljdsyi H Ekopfx Ac Aohh • Speed: 2980 rpm • Serial number: S88668802 • Design: oil-free • Quantity: two units available Scope of delivery: • Compressor unit as shown • Integrated control cabinet/controls

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Lhjdop N H Huspfx Ac Ajh Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Unfortunately no documents available.

Condition: reconditioned (used), Screw compressor stages for Atlas Copco, Kaeser – AIREND SIGMA – 1,2,3,4 SIGMA – 12 SIGMA – 175, 170, 18, 19, 26, 27, 28, 290, 292, 293, 33, 37 OIS-H03 OIS-H06 OIS-J01 OIS-K03 OIS-K13 OIS-K14 OIS-K15 OIS-K25 OIS-K26 OIS-K36 OIS-L03 OIS-L06 OIS-M01 Lhsdpfx Acoxy Aaqe Ash OIS-M05 – C146 OIS-M08 OIS-N01 OIS-N02 OIS-O01 OIS-O05 OIS-Q01 C146 C190 C111

Condition: good (used), overall weight: 5,600 kg, fuel type: diesel, color: original, Year of construction: 2007, machine/vehicle number: YA3-062658-70614985, PROD. ATLASCOPCO TYPE XAMS406 CD S/N YA3-062658-70614985 YEAR 2007 CAPACITY (kW) 186 OUTPUT (m3/min) 24.5 Lhodpsvrfkysfx Ac Ajh CIS (bar) 8.6 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Year of construction: 2020, condition: new, Field of application: Construction Attachment suited for: Loaders Selling price: € 100, US$ 105,9 Galen Group is very experienced in delivering custom solutions to the underground mining industry. No matter the need, Galen’s experienced design, engineering and manufacturing teams deliver the solution that is right for you. More heavily guarded underground mining buckets designed for corrosive mining materials. For the entire underground loader line, Galen Ground Engaging Tools system now offers bolt on half arrow ground engaging tools (GET) for bucket edges. The system is designed for high abrasion applications where weld-on GET experience high wear rates. With the retention system, the bolt-on GET offer more wear material than standard weld-on GET, and the bolt-on design enables quick removal and replacement. Lhjdpfxen Tm A Te Ac Aeh Despite additional wear material, the low-profile front edge eases pile penetration and promotes fast bucket loading.

Condition: used, Year of construction: 1990, operating hours: 3,579 h, Since 1972, your reliable partner for all matters concerning automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles available, including vans, commercial vehicles, and construction machinery! Ljdszgpzzopfx Ac Ajhh We continuously offer you attractive financing options at special reduced rates. If you are interested, we are happy to prepare an individual offer for you! Trade-ins of your commercial vehicle or construction machinery are welcome. If you require a new TÜV inspection, we will gladly provide you with an offer from one of our partner workshops. Our offers generally do NOT include a new TÜV inspection unless otherwise specified. Delivery of your "new" commercial vehicle is possible through our external partners at an additional cost. The information provided in advertisements, online, on price tags, and in images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability or guarantee for typographical or data transmission errors. Listed features should be verified separately as needed. Subject to errors and prior sale.

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer VIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 breaker * TEX 10PSKL breaker Lodpfx Acoyai Eue Aehh * TERRA Hammer TU 055R ground rocket * Compressed air hose * Hose reel Compressor with generator ATLAS COPCO XAS 58-7 Registered: 11/2023 Equipment: Construction compressor Atlas Copco MCT type XAS 58-7 G, with integrated generator 6kVA Outlets: 2 x 360V / 1 x, unbraked drawbar, height adjustable, initial oil fill, lifting eye, closed pan base, starter motor protection SMP, overrun brake & handbrake, auto-reverse, jockey wheel, support foot (unbraked version), truck DIN towing eye (400 mm), lighting as per StVZO, included: - Pneumatic breaker Atlas Copco TEX 10 PSKL, weight: 10.7 kg - Pneumatic breaker TEX 230 PE, weight: 27 kg - Various pointed and wide chisels, asphalt spade 115 mm wide - TERRA Hammer TU055R, TERRA compressed air hose approx. 15,000 mm long, TERRA oiler, Original price: complete with accessories €28,000 net * New inspections (TÜV) / safety checks, or weight reductions/increases are available on request. We are happy to assist with export/transit license plates. Vehicle delivery within Germany is also possible. Contact us! ---- We speak German, English, and Russian!---- No liability for printing & typing errors, subject to change, prior sale and mistakes reserved!---- About us: Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 sqm you will find a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. Customer satisfaction is our top priority, which is why we offer our clients an excellent all-round service package and provide a competent contact person to assist you throughout the vehicle purchase or sale process. See for yourself! Our services for you: Vehicle loading: We are happy to assist you with loading your purchased vehicles. Organization of special transports: We are happy to help you with organizing special transports. Temporary/export license plates: We are happy to assist with obtaining export/short-term license plates. Completion of customs formalities.

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer VIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 HP * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA Hammer TU 055R pneumatic mole * Compressed air hose * Hose reel Compressor with power generator ATLAS COPCO XAS 58-7, Registered: 11/2023 Lhjdpfx Acoy Rv Ilo Ajh Equipment: Construction compressor Atlas Copco MCT type XAS 58-7 G, with integrated power generator 6kVA Sockets: 2 x 360V / 1 x auxiliary circuit, unbraked, height adjustable, initial oil fill, lifting eye, enclosed drip tray, Starter Motor Protection (SMP), overrun and parking brake, automatic reversing system, jockey wheel, support leg (unbraked version), HGV DIN towing eye (400mm), lighting in accordance with German road traffic regulations (StVZO), included: Atlas Copco pneumatic hammer type TEX 10 PSKL, weight: 10.7 kg Pneumatic hammer TEX 230 PE, weight: 27 kg Various pointed and flat chisels, asphalt spade 115 mm wide TERRA-Hammer TU055R, TERRA compressed air hose approx. 15,000 mm long, TERRA oiler RRP: complete with accessories €28,000 net * New main inspections / safety checks or weight reductions/increases are possible upon request. We are happy to assist in obtaining export/temporary registration plates, as well as in transporting your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! No liability for printing or typographical errors, changes, interim sale, or mistakes excepted! Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm, we offer a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide a competent contact person, who will assist you with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organizing special transports We are pleased to help you organize special transports. Temporary/export license plates We are happy to assist you in obtaining export/temporary license plates. Handling customs formalities

Condition: ready for operation (used), functionality: fully functional, power: 37 kW (50.31 HP), Year of construction: 2019, pressure (max.): 13 bar, usable tank capacity: 1,500 l, rotational speed (max.): 3,800 rpm, volume flow: 475.2 m³/h, machine/vehicle number: API866497, The compressor received a comprehensive service in December 2025, including an oil and filter change! TECHNICAL DETAILS Cut-in pressure: 8.5 bar Cut-out pressure: 10.0 bar Operating temperature: 76 °C Volume flow: 131.9 l/s Volume of pressure vessel: 1,500 l Manufacturer of pressure vessel: OKS Otto Klein GmbH MACHINE DETAILS Engine power: 37 kW Engine speed: 3,800 rpm Operating hours (as of 12/2025): 31,006 h Machine weight: 860 kg The following work was carried out during the service in December 2025: Oil change Air filter cartridge replaced Oil filter replaced Oil separator cartridge replaced Emergency stop switch checked Safety valve checked Test run performed Oil level checked Lhodpfx Acezf Afqo Aeh Oil leaks checked Air leaks checked Belt tension checked Drive coupling checked

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hours Lamp operating time: Device 647.4 hours Total lamp operating time: 88.9 hours Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and Fade-Ometer, with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coating industries, as well as the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. The 3000 series has been certified according to CE, UL, CSA, ISO, and EN standards. The main features of this device are: a rotating sample rack to maximize the homogeneity of all samples; customizable nozzles for uniform front and back spraying of samples; ASTM black panel thermometer or ISO/DIN black standard thermometer for regulating and monitoring the temperature at the sample level to ensure the repeatability of the tests. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - displays all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Lsdpfszgr Nhsx Ac Ajhh Display of diagnostic messages 14 factory-preprogrammed test methods (Weather-Ometer); 6 factory-preprogrammed test methods (Fade-Ometer) Properties: Type: Climate Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: used Scope of supply: (See image) (Subject to change and errors in the technical data, information provided!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2014, operating hours: 594 h, Field of application: Construction Empty weight: 750 kg Capacity: 5 m³/m Technical condition: very good Visual appearance: very good Drill equipment: Plastic canopy Delivery terms: EXW Working pressure: 7 bar Please contact Vink Machinery for more information Lhsdpfx Ajzd Af Isc Aoh = Additional options and accessories = - Plastic canopy

Condition: used, Year of construction: 2023, Atlas Copco ZE6D275-5VSD Centrifugal Air Compressor, 315kW, 690V, 1763rpm (Unused) Lodpfx Acszc Rgls Ajhh Tag K1501S See Lot Details pdf file attachments section below for further information. Photos may feature items not included and should not be relied on. The description table/text describe the item(s) for sale in this lot.

Condition: used, Quantity: 4 units Functionally tested; item originates from the dismantling of equipment from an automotive supplier. 3001 4294-2304 Atlas Copco Manufacturer: Atlas Copco Model: 3001 4294-2304 Lsdpfxjzfi Tus Ac Ajhh Component from Atlas Copco, part of an SCA control or connection unit for industrial applications. Used in automated production environments, particularly in adhesive and dispensing technology. Ideal for replacement, maintenance, or system expansion in existing Atlas Copco systems.

Condition: used, Year of construction: 2010, Lot consists of: (1) Compressor Technical Details: Lhodpsym Txxefx Ac Aeh max. 8.6 bar, Input 702 kW / 1,700 rpm

Condition: used, Year of construction: 2002, Max. working pressure: 7.7 bar, volume approx. 280 m³/min, input power 824 kW /// Drive motor: model AMA 400S2L BSH, 1,000 kW / 5,500 V / 121 A / 50 Hz / 2,969 rpm, weight approx. 3.5 tons /// Centrifugal compressor: model ZH 10,000-5-7, max. input 1,737 HP, input 2,969 rpm, max. output 12 bar Lodpfx Acoym Twnj Ashh

Year of construction: 2018, condition: ready for operation (used), Compressor system manufactured in 2018. This Atlas Copco GA15VSD+FF features a motor power of 15 KW and operates at a pressure of 12.75 bar. It includes a 1,000-liter tank, making it suitable for various applications. If you are looking to get high-quality compressed air capabilities, consider the Atlas Copco GA15VSD+FF machine we have for sale. Contact us for further details. • Motor power: 15 kW • Pressure: 12.75 bar Lhjdezdi Snepfx Ac Aeh Additional equipment • 1,000-liter tank included