Used Atlas 1604 for sale (463)

Condition: good (used), Year of construction: 1998, operating hours: 10,300 h, overall weight: 475 kg, fuel type: electric, volume flow: 186 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, 22kw 3.1m3/min ATLAS COPCO GA22 screw compressor Continuously serviced and maintained 22kw screw compressor for sale. Manufacturer: Atlas Copco GA22 SP operating hours: 10350 Year of manufacture: 1999 Capacity: 3.1 M3/minute, Ksdpfx Amjtxpd Ie Eelr pressure: 10 bar Power 22kw main engine speed: 3,000/min Net weight: 405 Kg Dimensions: mm (LxWxH) Noise level: 66 dB service booklet, circuit diagram.

Condition: excellent (used), Year of construction: 2002, operating hours: 122,000 h, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), fuel type: electric, volume flow: 1.56 m³/h, operating pressure: 8 bar, noise level: 65 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, Continuously serviced, excellent condition. Klsdpfjrn S Hpox Am Esr Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023. Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar Ksdpfx Aeyzaamem Eelr

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Intermediate mounting dimension: 160 mm Kjdpfxeb A I Inj Am Eslr -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket Kjdpjb A I Rcsfx Am Ejlr -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Kledpfx Amjuuarye Eer Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Atlas Kledpfx Aotq Em Eem Eer Type: CI3000+ Ci3000+ Weather-Ometer/ Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hrs. Light duration device 647.4 hrs. Total lamp operation 88.9 hrs. Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. The 3000 series is CE, UL, CSA, ISO and EN certified. Key features of this device include: a rotating sample basket to maximize the homogeneity of all samples; customized nozzles for uniform sample front and back spraying; ASTM black plate thermometer or ISO/DIN black standard thermometer for control and monitoring, temperature at sample level to ensure test repeatability. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - display of all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages 14 factory pre-programmed test methods (Weather-Ometer); 6 factory pre-programmed test methods (Fade-Ometer) Features: Climate type Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. Kledpfxog Dglye Am Eer XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Rated current 16A Lamp current max. 20A Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved). Further questions we can answer on the phone for you.

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. Features: Type Climate Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000 humidification system works with a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must be passed through a water/oil separator. The small air regulator in the Cİ3000 contains a second water/oil filter and a 5 micron solid filter. Make sure that a separate oil/water separator is installed and do not rely on the air regulator filter, as this is only designed as an additional device. Compressed air specifications Kodpfsucd Rbjx Am Eelr Pressure 80-100 PSI (552-689 kPa) Flow rate 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the C13000 37.5 width X 29 depth X 72" height (95 width X 73 depth X 183cm height) Required footprint: 41.5 width X 80" depth (105 width X 203cm depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz 〜3/N/PE 8 kW 404 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) Ksdpfoxbd Raox Am Eolr - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, mileage: 1,001 km, first registration: 01/1994, color: red, driver cabin: other, gearing type: other, Year of construction: 1994, Equipment: crane, Vehicle location: Bovenden, Includes rotary head and upper linkage! Overall width approx. 500 mm, capacity approx. 250 l. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, intermediate sale and errors excepted! Kedoyiu Erspfx Am Eslr

Condition: used, color: red, Year of construction: 1981, operating hours: 4,391 h, Tank pressure: 11 bar Klodpfx Aex S Nxaom Eer

Condition: used, Year of construction: 2002, machine/vehicle number: AII 476498, overall weight: 1,600 kg, power: 75 kW (101.97 HP), volume flow: 709 m³/h, pressure (max.): 10 bar, Two used compressors for sale. Unit price: €13,000. Klodjyymnnepfx Am Esr

Condition: excellent (used), Year of construction: 2018, overall weight: 403 kg, volume flow: 2.39 m³/h, operating pressure: 10 bar, input voltage: 400 V, ATLAS COPCO GA 15 Screw Compressor Ksdpfx Aoyfw Sgom Eslr Motor: 15 kW Output: 2.39 m3/min Pressure: 10 bar Year of manufacture: 2018 Operating hours: 8092 h

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg Klsdpfxehabk Dj Am Eor

Condition: used, Year of construction: 1983, functionality: fully functional, Atlas Copco Industrial Screw Compressor – 75 kW – 7.5 m³/min – 8 bar Available: Atlas Copco GA Series industrial screw compressor, a professional machine designed for continuous operation in demanding industrial environments. The compressor is mounted in a soundproofed enclosure with hinged access panels for easy maintenance and inspection. A robust and reliable unit, true to Atlas Copco’s industrial standards, ideal for manufacturing plants, workshops, and compressed air stations. Technical specifications: - Manufacturer: Atlas Copco - Model: Oil-lubricated rotary screw compressor - Motor power: 75 kW - Voltage: 400 V - Current: 157 A - Motor speed: 1460 rpm - Operating pressure: 8 bar Klsdpfxeytgrfo Am Esr - Air delivery: 7,500 l/min (7.5 m³/min) - Year of manufacture: 1983 Features and equipment: - Integrated air/oil separator - Air receiver and auxiliary components included - Soundproofed cabinet - Complete turn-key compressed air unit

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg Kledpfx Amob A Sgko Eor

Condition: excellent (used), Year of construction: 2010, ATLAS COPCO GA45VSDFF screw compressor, WATER-COOLED machine with inverter and dryer, after service Technical data: Capacity: 8.67 m³/min; motor power: 45 kW; Max. pressure: 12.75 bar; year: 2010 Hours: 9714 h!!! Kedpfx Ameyt Hzgs Eolr 33,500 EUR net 41,205 EUR gross The compressor is fully operational, ready for work, with warranty. Service provided.

Condition: excellent (used), Year of construction: 2003, ATLAS COPCO GA18VSDFF screw compressor, machine with inverter and air dryer, after maintenance. Technical data: Capacity: 3.24 m³/min; Motor power: 18.5 kW; Max pressure: 12.75 bar; Year: 2002; Operating hours: 15,116 h!!! 16,500 net Kjdpjyt Hxrjfx Am Eelr 20,295 gross The compressor is fully functional, ready for operation, and comes with warranty. Service support provided. Video link below.

Condition: excellent (used), Year of construction: 2013, ATLAS COPCO GA18VSDFF screw compressor, machine with inverter and air dryer, after service Technical data: capacity: 3.62 m3/min; motor power: 18.5 kW; Ksdsyt Hwhepfx Am Eslr maximum pressure: 12.75 bar; year: 2013; operating hours: 8369 h 25900 net 31857 gross The compressor is fully functional, ready for operation, with warranty Service provided. Video link below.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, ATLAS COPCO GA11VSDFF screw compressor – machine with frequency inverter, dryer mounted on the air receiver, after maintenance Kodpfx Asyt Hvqsm Eslr Technical data: Capacity: 1.70 m³/min; Motor power: 11 kW; Max. pressure: 9.8 bar; Year: 2008 Operating hours: 8,161 h!!! Price: PLN 14,500 net PLN 17,835 gross Compressor fully functional, ready for operation, with warranty Service provided. Link to video below.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: A11 702998, Equipment: type plate available, Compressor unit with pressure vessel, air dryer, and additional accessories Klsdpoxvidnefx Am Eor

Condition: excellent (used), Year of construction: 2016, volume flow: 2.2 m³/h, pressure (min.): 8 bar, ATLAS COPCO GA 11 VSD + screw compressor Variable speed (with inverter) Kledpfx Amoytyh Ho Esr 11 kW motor Capacity 1.95 m3/min Pressure 13 bar Year of manufacture 2016 Operating hours: 9,150 h

Condition: excellent (used), Year of construction: 2014, volume flow: 2.2 m³/h, pressure (min.): 8 bar, ATLAS COPCO GA 15 VSD+ Screw Compressor Variable speed (inverter driven) 15 kW motor Capacity: 2.51 m³/min Kodpfx Amoytyd Ue Eslr Pressure: 13 bar Year of manufacture: 2014 Run hours: 11,380 h Compressor serviced – filters and oil replaced.

Condition: used, Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab Klodpeb A Huiefx Am Eer -Bucket width: 600 mm -Shovel length closed: 1400 mm -Total height: 2200 mm