Auto edger for sale
Identified location: Ashburn (US) (Edit)
Automatic edger line Esterer Combimess
Type - DK 50, right machine.
Year of construction - 1989.
Edger - DK 50 B
Main drive - 50 kW
Board length - 1.0 - 5.0 m
Width of board - 60 - 600 mm
90f2oovws
Axle adjustment: hydr. servo cylinder
Complete extensive mechanization incl .:
- feeder traverse conveyor approx. 50 meters in front of the increaser,
- Board separation increaser,
- continuous crosscuting, board alignment,
- Automatic infeeding system, type ARS
- Autfeedig with spreader separator 7... more
saw double edger WALTER SPIERING TRKR 700
Location
Gorzow Wielkopolski.
Conditions of delivery
Pick your own
G00rx8o
Cost of delivery
Client cover
startup type
negotiated
Description
Comments
Dwupiła for cutting logs maximum diameter of 36 cm diameter blades discs 700 mm x 2 power motors drank 17,5kW x 2 also feeder timber .IMPORTANT chain saws to cut wood sliding round .minimalny size of 10 mm maximum spacing of 36 cm saw for cutting wyżynków , logs length 3000 mm the machine after kapitalhym r... more
Manufacturer: FCI SYSTEM
Model: Solvent Auto
Type: Wet Station
Version: 4 AND 6 INCH
Condition: excellent
Vintage: Jun 2011
Sale condition: as is where is
Quantity: 1
Comments:
Bjosy2ptnf
-Still installed in the fab.
-Shut down and powered off.
-It can be inspected by appointment.
-The equipment is in excellent condition, with no missing parts.
-The equipment was lightly used in an R and D environment for around 2-3 years.
-The equipment ran 4 inch Sapphire wafers, but 6 inches wil... more
1998
ready for operation (used)
Serial No. 9253909
Control Heidenhain 426
Table Size 3000mm x 1000mm
Table Load 7000 kgs
X Axis Travel 2500mm
Y Axis Travel 1200mm
Z Axis Travel 1000mm
Spindle Taper ISO 50
Head Swivels 360 degrees on two faces
Input 415/3/50hz
Main Motor 22 kW
Spindle Speeds 20- 4000 rpm
Feed Rate 2 - 5000 mm/min
Rapid Travesre 8000 mm/min X axis, / 10,000 mm/min Y & Z axis
Fitted with Coolant, Hydraulis tool clamping and UDG Auto-Indexing Milling Head
Equipment Transformer, suds tank, Splash guards
Features... more
cutting diameter 240 mm
saw band length 2730 mm
cutting width 270 mm
cutting speed 37 + 74 m/min
dimensions of saw-band 2730 x 27 x 0,90 mm
Doqfykxz
240 mm
230 mm
270 x 230 mm
210 mm
200 mm
200 x 210 mm
130 mm
130 mm
130 x 160 mm
total power requirement 1,2 kW
weight of the machine ca. 0,3 t
dimensions of the machine ca. 1,6 x 1 x 1,7 m more
used
Welding edge former, welding edge former, weld seam preparation, welding edge forming machine, edge milling machine, edge milling machine, mobile milling machine
Ber3oot893
-with rails system
-12x rails length 1210 mm
-Sizing length max. 30 mm
-max material thickness 40 mm
-electrically controllable with electric feeder
-Dimensions box 1170/780 / H510 mm
-Weight 320 kg more
BERG & SCHMID GBS 185 eac
Biac7r2oiy
cutting diameter 185 mm
weight of the machine ca. 500 kg
machine in good condition more
ready for operation (used)
Serial No. 200/2185/03
Stud Capacity 2.5mm - 8mm
Bjavikijsi
Amperage 25 - 200 volts
Input 240/1/50hz
Stud Length 6mm - 35mm
Fitted with Stud Vibration Feeder Unit, Serial No 01/1054/03
Equipment Earth cable, Stud gun
Features On Mobile unit
Length 600mm
Width 600mm
Height 920mm
Nett weight Actual 100 Kgs. more
Rated output: 300 Amps
Output range: 10- 300 Amps
Output: 80- 180 V
Torch Model: XT301
Production Piercing & Cutting capacity: 40 mm
Max. Piercing & Cutting capacity: 45 mm
Max. Edge Start: 75 mm
Blkw7ln2bq more
2011
ready for operation (used)
Serial No. 058092611
Control Fanuc 18i - PB
Capacity 20 ton
Material thickness 6.35mm
Punching Accuracy 0,1mm + or -
Hole size 88.9mm at 2mm mild steel thickness, 30mm at 6mm mild steel thickness
Largest tool diameter `D` (88.9mm)
Sheet size 1250mm x 1250mm
Sheet weight 110kg
Feed Clearance 25mm
Turret Configuration 31 Stations
Turret Layout 16 `A` (12,7mm) 10 `B` (31,7mm) 2 `C` (50.8mm) 3 `D` (88,9mm) Auto index stations
X axis travel 1326mm
Y axis travel 1337mm
Hit rate @2mm working stroke Up ... more
2012
used
2004
repair required (used)
1999
ready for operation (used)
Serial No. 25100075
Control Fanuc 18-P
Capacity 20 ton
Material thickness 6.4 mm
Press stroke length 40 mm
Sheet size 1250 mm x 2500 mm or 1250 mm x 5000 mm with 1 reposition
Ut8ewug
Sheet weight 150kgs
X axis travel 2500 mm
Y axis travel 1270 mm
Hit rate X axis 25.4mm pitch = 350, Y axis 25.4 mm pitch = 280
Feed rate X axis = 100 m/min , Y axis = 80 m/min
Input 415/3/50
Fitted with Brush tables, "Sick " infra red lightguards, quantity of tooling
Equipment Dryer
Features Running hours - 424 hour... more
used
Body press, straightening set, removal tool, dent removal tool,
-Europrotec body repair kit
-5 ejection pistons / 2 retraction pistons
Eu8vgblci
-compl. Content / technical See photo for dates
-Metal case
-Dimension Kofffer 500/475 / H80 mm
-Weight 23 kg more
2013
used
1998
ready for operation (used)
Serial No. 3411032198
Control Strippit Model 404561-000 Serial No. 010
B9td9af
Material thickness 1/4" / 6mm
Hole size 3.1/2" / 89mm
Sheet thickness 1/4" / 6mm
Sheet size 40" x 50" / 1016mm x 1270mm
Sheet weight 93 kgs
Throat depth 40" / 1016mm
X axis travel 40" / 1016mm
Y axis travel 51" / 1295mm
Hit rate 200 Hits per Minute @ 1" / 25.4mm Centres
Input 380/420/3/50 ac
Equipment Rounds 2.5mm, 4.1mm, 6mm, 6.35mm, 17mm, 17.5mm, 18mm, 20.6mm, 22mm, 22.5mm, 25mm, 25.4mm, 34.6mm, 36.5mm, 38mm, 40mm, ... more
for cutting or circular saw Ø: 90 - 600 mm
Tape u. Hacksaw blade width up to: 55 mm
Tooth pitch: 3 - 35 mm
Tooth height: 1 - 17 mm
Sharpening disc Ø max .: 190 mm
Grinding wheel Ø max .: 180 mm
Grinding wheel speed: 2780 rpm
Drive motor: 380 V, 0.3 kW
Required space: 670 x 600 x 1000 mm
Xsraw
Weight: 70 kg more
2013
used
1991
ready for operation (used)
Sheet size 1000mm x 1270mm or 1000mm x 2560mm with 1 Reposition
Feed rate 65 Metres per Minute
Equipment Large Quantity of Used Punches & Dies. Nisshinbo thin type tooling.
Beg9gjf2h9 more
2015
used
2016
used
2015
ready for operation (used)
Serial No. 15 UO585
Grs3l8gys
Maximum bevel width 35mm
Maximum material thickness 10mm
Bevelling Angle +60 / -60 degrees
Input 240/1/50hz
Feed Speed 250 - 500 mm/min
Equipment 3 x 120mm guide tracks, 3 x track clamps
Features Beveling in both directions
Length 1200mm
Width 360mm
Height 800mm
Nett weight actual. 160 Kgs.
Literature I/B more
2011
used
