Used Auto Welding Helmet for sale (39,997)

Condition: new, Design: Anti-glare cassette with colorfast filter and selectable protection levels from 4/9–13 Steplessly adjustable sensitivity range "super High" Opening delay adjustable via control knob Maximum ultraviolet/infrared protection across the entire protection level range Reflection-free cover lens and inner protective lens Energy-efficient electronics with super-sleep mode for approx. 3,000 hours without battery replacement Codpfx Afsw Rntfslshf

Condition: new, LOWEST PRICE ONLINE including FREE GOODIES! 3m SPEEDGLAS G05-03 Included in delivery: - G05 helmet - Adflo - Battery - Charger - Instruction manual Cjdpfowbuk Hox Aflohf - Hose Plus 20 helmet lenses Gloves, 1x TIG, 1x MigMag + Heatshield Included in delivery = Images

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Chodpeht U Snefx Aflef Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Condition: new, 250kg Welding Positioner Turning Capacity: 250kg at 300mm Tilting Capacity: 250kg at 300mm Rotation Speed / Power: 0-4rpm at 0-90v / DC200w Chodpstzan Nofx Aflof Tilt Range / Power: 0-135° in 30sec/ DC500W Rotation Drive Control: DC Motor Card Table Size: Ø500 x 20t c/w 4 slots Earthing: 300A

Condition: good (used), Year of construction: 2002, machine/vehicle number: 094-02, Offer 24377 Technical data: - max. load capacity 75 kg - Face plate diameter 500 mm - Spindle shaft passage 100 mm - Face plate swivels 0 - 90 ° - Rotation electr. infinitely variable 1 - 10 rpm - Right + left rotation - E. - Foot switch - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 870 mm Cedpfxsuac Ndo Aflehf - 3 jaw chucks 300 mm - Space requirement approx. W 750 x H 870 x D 500 mm - Weight approx. 150 kg

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 3,000 kg, faceplate diameter: 1,020 mm, welding current (max.): 600 A, swivel angle A-axis (max.): 135 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Load capacity: 3,000 kg Center of gravity distance / Eccentricity: 150 mm / 150 mm Maximum tilt angle: 135° Tilt speed: 60 s Chedpfswbqmdex Aflef Rotation speed: 0.033 – 0.66 rpm Dimensions of faceplate Height of top edge of faceplate (horizontal): 797 – 1,820 mm Height of faceplate rotation axis (vertical): 850 – 1,650 mm Diameter of faceplate: 1,020 mm Grooves on faceplate: 4 × 18 mm Operation Handheld remote control: Robust industrial handheld remote control with all operating functions MACHINE DETAILS Weight: 1,800 kg Installation dimensions: 2,100 × 1,300 × 1,050 mm Electrical Specifications Max. welding current: 600 A Input voltage: 380 – 400 V / 3 Ph / 50 – 60 Hz Dimensions as per sketch Total height (maximum): ~2072 mm Maximum height of the center of the axis: ~1472 mm Minimum height of the center of the axis: 650 mm Distance from floor to table top edge: 797 mm Distance from table top edge to center of the axis: 147 mm Rear foot height: 100 mm Outer diameter of rotary table: Ø1200 mm Pitch circle diameter (PCD): Ø489 mm Number of mounting holes: 4 x M16 thread Angle segments on rotary table: 120°, 45° EQUIPMENT - Industrial handheld remote control

Condition: like new (used), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters, vertical & horizontal Pre-Set Programmable, easy operation control panel. Friendly interface. Codpfx Aevl Ewmjflshf Overlay welding for Ball, Valve, Flange face, RTJ groove, Bevel etc. One touch, More Welding Solutions, New stocks for sale!!

Condition: new, 3t Conventional Welding Rotator Set Item: Drive / Idler Rotator Set Load Capacity Each: 1.5MT Total Rotation Capacity: 4.5MT Chjdpfx Aetqn Ufeflof Vessel Size Min: Φ286mm at 60° included angle Vessel Size Max: Φ1000mm at 60° included angle Tyre Type & Size: Vulcanised PU, Φ245mm x75mm Roller Speed: 400-4000mm/min

Year of construction: 2018, condition: ready for operation (used), Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible. Codpfx Afou Izq Sslehf

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Csdevtqacspfx Afljhf Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Condition: good (used), Year of construction: 2021, Automatic machine for the production of PVC tarpaulin covers for tent halls – sold for spare parts. Italian-made welder for tarpaulins by SolarEdge Automation Machines, manufactured in 2021. The machine has seen limited use for manufacturing PVC covers for tent structures. Machine specifications: - Material: PVC with a weight of 450 g/m2 - Material specifications: max. width – 3250 mm, min. width – 285 mm, max. roll weight – 1000 kg, max. external diameter – 600 mm - PVC or PE keder rope with a diameter of 4/5/7 mm - Minimum product length: 1500 mm - Minimum finished product width: 800 mm - Power supply: 400V The machine welds together the surfaces of two material rolls, cuts them to the required width, and thermal-bonds the keder cord to the edges of the material. The machine consists of: - 2 material feeders with automatic material position adjustment - Knives for cutting material to required width - Welding module for joining two pieces of material - Modules for fusing the keder tape to the material edges - Module for feeding and welding the keder cord with automatic tension control - Encoder for product length control - Knife for cutting the product to the set length Welding is performed with high-performance Leister hot air heaters. Components used in the machine: 1. Heaters and blowers by Leister 2. Control systems, electrical and safety components by Omron and Siemens 3. Drives and gearboxes by Seipee and Nidec 4. Pneumatic systems by Festo and SMC 5. Vision system by HIKVISION 6. Linear guides and carriages by HIWIN Machine is only sold as a complete unit! Codpjx Dk H Tsfx Aflohf

Condition: used, Automatic Welding System Brand: Motoman / Robotec Model: W45/635/2.2/F1CS - A45 G59 Single-station welding system composed of: * 2 six-axis anthropomorphic robots * 1 two-column positioner Wire welding (MIG/MAG) Chsdsx Dbirjpfx Aflsf

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Chodpfxjdzp U Ie Aflef Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: excellent (used), Year of construction: 2018, Very well maintained Quinto 603. Multiple machines of this type are available. Cedew Exytspfx Aflshf

Condition: like new (used), Year of construction: 2016, operating hours: 20 h, functionality: fully functional, The machine is not in use anymore and therefore its for sale. It has 20h of welding and it has been 596h turned on. It is as new, as can be seen on pictures. Location of the machine is in KFK, Croatia and here it can be seen. For more information and price contact us. Chedpfx Afjwwt S Uelof

Condition: ready for operation (used), Technical characteristics Welding machine: Welding of a frame (4 x 90° angles) in one automatic work cycle for the positioning of the profiles and digital positioning of the welding heads Fully automatic evacuation system of the welded frames The machine complies with CE safety standards and the four welding heads are equipped with a cover to ensure perfect protection of the operator All types of profiles (programmed KBE and PROFIALIS) Welding capacity: height 200 mm - width 140 mm Dimensions: inside 150 x 250 mm - outside 3150 x 3600 mm Welding parameters are individually adjustable on each welding head Electronic adjustment and control of the welding parameters on the screen Electronic temperature control of the welding plates and the limiting knives with digital display and alarm on the control panel Automatic adaptation of the welding time to the profile section Compensation system per profile piece to eliminate cutting tolerances (+5 / -2 mm) Perfect bead limitation for white, colored or structured profiles Automation - error-free production File from your frame program, barcode reader "Desired size = welded size" allows for optimized cutting of the panels Possibility to generate a production report per period Machine control by PLC - PC of the latest generation Diagnostic system on screen (text and figures) Deburring machine : All types of profiles and combinations Speed and automation: high precision of the tool guides on 4 axes Automation of the control system Electronic recognition of the profile type Selection of the profile type by means of barcode label or online Automatic detection of crossbars High-frequency motors, adjustable speeds without interval All movements and speeds are adjustable from the control panel Cjdoundd Hjpfx Afljhf Selection of grooving or flat finishing as standard on the machine PLC control - PC of the last generation with INTEL processor Diagnostic system on screen Easy programming of new machining and profiles Power and Motors Overall dimensions

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 439, AWM Automatic Binder Welder with Additional Post-Heating Type: A.R.M. 400 VS SPECIAL Serial Number: 439 Year of Manufacture: 2011 System Components: 1. Decoiler for longitudinal and frame wires 2. Powered pre-decoilers 3. Radial loop 4. Straightening and bending machine 5. Binder feeding and welding (including additional longitudinal wires) 6. Binder stacker Wire diameters for production: - Lower longitudinal wires: 6, 8, 10, 12 mm - Upper longitudinal wires: 8–10 mm Diagonal pitch: 200 mm Binder height: 100–200 mm Location: Konarzyce (Książ Wielkopolski) AWM Automatic Lattice Girder Welding Line Type: A.R.M. 400 VS SPECIAL Serial Number: 439 Year of Production: 2011 Line Components: 1. Decoilers for longitudinal and frame wires 2. Powered pre-decoilers 3. Radial loop 4. Straightening and bending machine 5. Binder feeding and welding (including additional longitudinal wires) 6. Binder stacker Chedpfx Afsxcbc Aslof Wire diameter for production: - Lower longitudinal wires: 6, 8, 10, 12 mm - Upper longitudinal wires: 8–10 mm Diagonal pitch: 200 mm Binder height: 100–200 mm Location: Konarzyce (near Książ Wielkopolski) - Poland

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W Cjdpfexy Hqtex Aflohf -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: used, A total of 3 sets of soft, pre-turned top jaws are being offered. The price listed above applies to one set of chuck jaws. ----- Jaw interface: Serration 1.5 x 60° Chuck types: Kitagawa; Howa; B210; BB210; other Asian manufacturers Chuck size: 10" approx. ø 250 mm For example: HOWA 10", Auto Strong 10" Slot N = 16 mm Width B = 40 mm ----- Picture no. = Item no. Pos.1) 8035_10_09 → €25.00 per set Pos.2) 8035_10_10 → €25.00 per set Pos.3) 8035_10_11 → €25.00 per set ----- # Order - Shipping costs / per set €9.00 ----- Jaw dimensions: Width: 40 mm Height: 40 mm Length: 110 mm Csdpfx Afek Un Sijlohf Hole spacing: La = 17+22 mm For fastening screws DIN 912 = M12 T-slot => N = 16 mm ----- T-nuts or other types of chuck jaws available on request.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 24 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: the Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly flexible in use. Highlights and Features: - Power: 3,000 watts for top welding quality and speed Cjdpfx Afjwzv D Iolohf - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – optimally positioned for comfortable operation - Robust housing, intelligent internal layout for maximum service life - Touchscreen display for easy operation - Optional automatic multifunction wire feeder - Safety features: three-color alarm, safety interlocks, misuse protection mechanism - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Advantages - Safe operation thanks to extensive protection mechanisms and alarm systems - Flexible applications including automatic wire feeding and robotic integration - Low operating costs and easy maintenance through well-designed technology and durable components For more information or a consultation, the Airtech team is happy to assist you!

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DSPL-2025-Q2-01, overall weight: 150 kg, input voltage: 400 V, input current: 10 A, type of input current: AC, warranty duration: 12 months, total length: 1,560 mm, total width: 780 mm, total height: 950 mm, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, DS-Place – the compact all-in-one pick-and-place solution The DS-Place is a ready-to-use complete solution for automated parts handling. It combines robot, camera, PLC, conveyor system, and material hopper in one compact system – without lengthy integration. ✅ Fast & precise: Up to 1,200 parts per hour are reliably detected, picked, and transferred to the next station. ✅ Flexible: Handles a wide variety of plastic or metal parts – gently and consistently. ✅ Simple: Set up, connect, and start – no separate interface programming or complex coordination required. ✅ Industrial-grade: Built with proven components from leading manufacturers (Epson, Keyence, Siemens, Item, Vetter). Csdpfx Afsw Rm Hwelshf With DS-Place you save time, reduce error sources, and increase process reliability. Ideal for companies that want to automate quickly without setting up a complex project. 👉 Contact us now for more information or a non-binding offer. Keywords: Pick-and-Place – Sorting system – Robot cell – Feeding – Conveying – Parts handling – Automation – Robot handling – Sorting – Positioning – Handling.

Condition: excellent (used), load capacity: 3,000 kg, table load: 3,000 kg, Equipment: foot remote control, Belgium Welding 3 To 3,000 kg load capacity welding positioner, complete set Horizontal load capacity 3,000 kg, tilted load capacity 3,000 kg Stepless tilt and speed adjustment Very robust construction Speed steplessly adjustable from 0.05 to 0.7 rpm, digital display Turntable diameter: 1,400 mm Height horizontal: 1,450 mm, tilted to center: 1,200 mm Length: 2.0 m x Width: 2.0 m Csdpfoxbhrhjx Aflehf Hand-held remote control with digital display and foot remote control

Condition: ready for operation (used), Year of construction: 1989, machine/vehicle number: D205228, Heinrichsglueck H-36 welding positioner Fully functional. Square table 1050x1050mm. The set includes a remote control with adjustment of table rotation speed and inclination (135 degrees). Chjdeuiac Hepfx Aflef New power and control cable.

Condition: excellent (used), Planspiral.lathe chuck Auto Strong Diameter 310 mm Mounting Camlock size 8 Cone diameter 139,735 6 stud diameter 25,4 Chodpfxsln Uixs Aflef Pitch circle diameter 171,4 Chuck height including flange 135 mm Weight 53 kg

Condition: new, Year of construction: 2025, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Codpon Sl D Rofx Aflehf