Used Automation Vacum for sale (10,996)

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Bjdpfsi D Uitsx Aczslr

Condition: good (used), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with tumbler(interlock). The doors are locked in automatic mode and can only be opened in automatic mode or in manual mode after pressing the Doors button on the control panel. Automatic mode cannot be started when the door is open. Function sequence The station is loaded with the pre-assembled module via the transfer conveyor. The operating steps of the automatic station with the passage of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning of the WT with the preassembled assembly in St.2.1 - Lowering of the beam with the scanners and the vision sensor - Scanning of the 3 codes (front panel, front LP, SD LP), comparison with the database - Checking the correct latching of the FFC in the connector - Lifting the carrier and lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in St.2.2 - Positioning of the screwdriver and screwing of the front LP - Lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in pc.2.3 - Lowering of the light protection cover and contacting, positioning of the carrier with the test sensors from below - type-dependent testing of the SD + CD lighting slots and pushbuttons Bledpfeibichex Aczjr - Function test CD eject button - Lowering the WT onto the conveyor > continue If faults occur during the test, they are indicated on the display and can be rectified if possible. To do this, switch to manual mode and open the doors. After the repair and starting of the automatic system, the WT is tested again in the station. If no repair is possible (e.g. screw fault), the WT is marked as NOK in the control system and is not processed further. Manual NOK marking and ejection is also possible.

Year of construction: 2020, operating hours: 1,800 h, condition: good (used), functionality: fully functional, machine/vehicle number: 50850283/P.0000893.03.05, The assembly line is a production system consisting of three separate units, interconnected by conveyor belts. In the first section, consumable materials are fed in via rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished mask blanks are transported via an indexing conveyor and additional transport belts to the next units, which are arranged in parallel. Each of these stations feeds and welds the ear loops to the mask body. Bljdpew Dn Uwefx Aczsr The line is suitable for the manufacture of surgical and general medical face masks, made from single- or three-layer PP (polypropylene) nonwoven fabric. System configuration Each production cell is based on an aluminum profile frame with swing doors made from Makrolon. For the required process stability, the stations are mounted on a solid aluminum table plate. The control cabinets are integrated into the frame. The equipment includes, among others, 3 ultrasonic welding units, Siemens PLC control, and various pneumatic systems from Festo. Performance requirements Output (gross): ≥ 80 units/minute Technical availability: ≥ 90% (VDI 3423) Required floor space for the complete system: approx. 6,000 x 5,000 mm Connection values Electrical connection: Operating voltage: 3P/N/PE 400 V AC 50Hz Mains fluctuation: ± 5% Short-circuit design: < 10kA Network type: TN-S Pneumatic connection: Compressed air: 6 bar ± 1 bar Ambient conditions Temperature range: 10°–35°C Max. humidity: 75% (non-condensing) Emissions Sound pressure level during operation: ≤ 78 dB(A) according to EN ISO 11204:2010 The machine is currently out of use and was regularly serviced during its operational period. At present, the machine is dismantled, with individual components stored under dust protection. Upon request, we can also sell our remaining raw material stocks for production.

Condition: used, Stöger Automation PESCE S&S bowl feeder 230V Bedpfx Acewcar Sjzelr

Year of construction: 1996, condition: ready for operation (used), X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Bledpfx Acjw U Dwbezjr

Condition: used, Stainless Steel Vibrating Feeder with Hopper. Hopper is 80x 60 cm on the top. Feeding pan is 80 cm long and 30 cm wide. Blsdpfx Asun I Nyoczsr

Condition: new, Year of construction: 2025, Robot cell for pallet making Ekatech Automation AB Robot Nailer 4017 Blsdpfx Acsq Iv Edszer

Year of construction: 2021, condition: like new (used), AVEREX HS-540i GTS Horizontal machining center with 8 pallets Control system - Fanuc M-Pro1 (0i-MF) - 10,4" color LCD - NC memory with 512 KB - AICC II Control with 200 blocks readable in advance - Ethernet and USB Device - Electronic handwheel - Weekly timer: Auto. Power On/Off of the machine - High Speed Skip - Manual Guide 0i - 54 (6+48) pairs of workpiece zero points - Tool Offset Memory C - 400 pairs of tool offsets - 400 storable programs - High Speed Skip Signal - Programmable spindle load monitoring - Tool Life Management - Advanced macro variables (#500-#999) - Program Restart - Helical Interpolation, Cylinder Jacket Interpolation - Drilling cycles, rigid tapping - Scaling, Mirroring, - Polar Coordinates Programming - Corner chamfering / Corner rounding - Blanking sets, up to 9 different - Customer macro "B Travels - travels X/Y/Z: 800/800/800 mm - spindle center to pallet surface: 30 - 830 mm - spindle nose to pallet center: 100 - 900 mm - travels B: 0-360 ° Speeds - rapid traverse X/Y/Z: 74/74/74 m/min - feed rate during milling: 0 - 40.000 mm/min - rapid traverse B: 66.6 rpm - 1G+ acceleration Pallet changer - rotary changer - number of pallets: 2 - pallet size 500 x 500 mm - Load capacity: 500 kg per pallet - workpiece size: Ø800 x H1.000 mm - Mechanical locking of the pallet clamping device - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,099 mm Tool changer - Tool holder: BBT 40 (SK 40 and HSK 63 optional) - Number of magazine positions: 80 - Max. Tool diameter: Ø95 mm - Max. tool diameter Max. tool diameter with free neighboring places: Ø185 mm - Max. length: 400 mm - Max. Tool weight: 8 kg - Type: fixed station/chaotic table - Speed: 16 sec. for 80 tools - Tool change time: 0,9 sec./2,1 sec. (heavy tool) - Chip to chip time: 3.0 sec./3.5 sec. (heavy tool) Spindle - Spindle Taper: BBT 40 Big Plus™ - Speed: 15,000 rpm - Drive power: 37 kW - Torque: 249 Nm up to 1,150 rpm - Compressed air through and at the spindle - Bearing diameter: Ø71 mm - lubrication: oil / air - oil cooler Rotary axis - Axis: Full 4th axis - 66.6 rpm - Indexing: 0.001 - Clamping force: 5.000 Nm - Holding force: 1.973 Nm Linear guides - Manufacturer: THK - width: 45 mm - guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball screw - Manufacturer: TSUBAKI - Diameter: 40 mm - Internal cooling: Yes, temperature controlled - Feed forces X/Y/Z: 13.500 Nm - Lubrication: Oil / Air Coolant management - Coolant system incl. tank 550 liters and pumps - Chip spirals on the right and left side of the machine - Coolant through the spindle, 30 bar, incl. preparation for 70 bar - Coolant shower - oil skimmer Accuracies - positioning accuracy: ± 0,005mm - Repeating accuracy: ± 0,0025 mm Other - Adjustable thermal compensation of spindle and motor flanges - Central lubrication oil / air - CE - 50 kvA transformer Dimensions (APC 2 / 80 or 120 tools) - Machine size: 4.914 x 2.660 x 2.632 mm - Footprint: 4.914 x 3.880 x 2.632 mm - Machine weight: approx. 12,960 kg Bedpfoh Iy Snex Aczjlr - Dual chip conveyor (combination hinged and scraper belt) - Magazine capacity increased from 80 (standard) to 120 ex works - BLUM TC50 probe with infrared transmission System for

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Robust container rotating device from Key Plant Automation (made in Great Britain) with a total load capacity of 3,000 kg. Continuously variable rotation speed. Suitable for component diameters from 100 to 1,400 mm. Included in delivery: Double foot pedal for right/left rotation with start/stop functionality. Machine is also available for rental. See data sheet for further information. Bljdpfxewaidrj Aczsr We would be happy to deliver the machine to you at a cost.

Condition: good (used), The following components from B&R Automation are for sale: Bljdpfx Acert T Awjzer - Power Panel 120 - CPU CP476 Both were removed in 08/2022 and have worked without any problems to date.

Year of construction: 1999, condition: ready for operation (used), X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Bljdpfx Aow U Dwhoczjr

Condition: ready for operation (used), From 2016. Complete and ready to be used. Comed with six months warranty. Bsdpevrqbkjfx Aczjlr

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total width: 2,600 mm, Winding/Unwinding Station with Motor Drive Unwinding width: max. 2600mm Unwinding/rewinding via sensor (dancer control) Winding diameter/roll diameter: max. 1200mm Double-sided folding bearings With clamping shaft for 3"/76mm diameter Winding direction switchable left/right Blsdpfx Acowy H Dvszjr Winding speed adjustable via rotary knob Robust welded frame, powder-coated, winder on castors Regulated drive of the clamping shaft via geared motor and frequency inverter Fully functional. Can be inspected if required.

Year of construction: 2023, condition: new, Here we offer a machine that was specially developed for fixing loose or cracked branches. The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible Blodepiufwjpfx Aczjr • Visual enhancement • Easiest operation DIAGNOSIS AND CORRECTION • Rotten branches • torn branches • Resin galls • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process The system can be viewed and tested by arrangement in 77866 Rheinau.

Condition: used, Year of construction: 1996, Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Bledpfx Aok Abn Sjczjr Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 1994, condition: excellent (used), Description:-table diameter 1400 mm -Table load of Max 3000 kg -Belt width of 150 mm Bsdpfjd Iw U Uox Aczelr -Speed max. 25m / min -Belt thickness max. 1.2 mm Very compact and easy-to-use palette Unwinder diameter of turntable 1400 mm of more robust machine body with high capacity speed control of cam universally suitable for Multicoil

Year of construction: 2001, condition: ready for operation (used), Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods. Bjdpetqtw Uefx Aczolr

Year of construction: 2022, condition: new, we offer you our oil cooler to reduce the cutting oil temprature at CNC Turning Machine. Bjdpjlzghpefx Aczslr if you have some question please let us know.

Year of construction: 2005, condition: not inspected (used), Shuttle conveyor (Traverser) Manufacturer: JOT Automation Overall dimensions: 3200 x 500 x 1000 mm Bsdpfjib H Tqox Aczjlr Shuttle conveyor (Traverser) Used to transfer PCB's from one PCB production line into two PCB production lines from single track to dual track operated machines or vice versa.

Condition: excellent (used), Year of construction: 2009, Robot GHS-Automatio Blsdpoff Hdtsfx Aczsr Type: SL 25/Easycontrol Year 2009 Electric Box

Condition: ready for operation (used), Year of construction: 2012, This system consists of filling machine, screwing machine and the transfer from one to the other. Includes two HIBAR Pump 4S3-R2 high-precision dosing pumps and one as a spare part. Formats: 8ml-1000ml. A list of all formats on request. Documentation available. Glass container with pipette: volume: 8ml/28ml/30ml, base dimensions: 28mm/34mm x 34mm/35mm, height: 65mm/67mm/67mm, filling opening: 10mm/10mm/20mm. PET container with pipette: volume: 30ml/50ml/60ml, base dimensions: 32mm/37mm/38mm, height: 68mm/72mm/88mm, filling opening: 10mm/10mm/21mm. PE container with splash: volume: 250ml/1000ml, base dimensions: 56mm x 42mm/85mm x 69mm, height: 140mm/210mm, filling opening: 18mm/19mm. Documentation available. Bleder Eqvhspfx Aczjr

Year of construction: 2018, condition: ready for operation (used), Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the "Fiber Placement" process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site inspection is possible. Blsdpfx Asriurfsczsr

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Bodpfx Aem Nckfsczjlr

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Bsdpfxsm H Uqks Aczslr

Condition: ready for operation (used), Year of construction: 2001, With documentation, an inspection is possible. Blsdpjf Ddrlefx Aczjr