Used Baking Moulds for sale (1,716)

Year of construction: 2016, condition: ready for operation (used), This HAITIAN JU9000II/6800 PLUS was manufactured in 2016. It features a clamping force of 9000 kN and an injection unit with a capacity of 2362 cm³. Operating on a 400 V / 50 Hz power supply, it consumes 199 kW and handles a rated current of 354 A. Weighing 39,000 kg, consider the opportunity to buy this HAITIAN JU9000II/6800 PLUS hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping force: 9000 kN • Injection unit – screw: 2362 cm³ / 80° • Power supply: 400 V / 50 Hz • Power consumption: 199 kW • Rated current: 354 A Ijdpeyab Afjfx Addjht • Short-circuit withstand current (In): 25 kA • Machine weight: 39000 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Hole size: Ø 136 mm -Recess: Ø 80 mm Iedpfxeduacwe Addoht -soft: Baking -Bolt circle: Ø 116 mm -Passage: Ø 41 mm -Weight: 4 kg

Condition: good (used), Planing width 610 mm Sturdy cast iron construction Edge jointing fence Auxiliary stop 4 kW, 380 Volt Two-knife wedge shaft Ihsdpfjx U Dgdsx Addot Tables fold upwards Machine ready for immediate use

Condition: good (used), functionality: fully functional, total length: 900 mm, total width: 1,530 mm, total height: 2,150 mm, input voltage: 400 V, control voltage: 24 V, DGUV certified until: 01/2027, type of input current: three-phase, water connection: 20 mm, Deck Oven Wiesheu EBO 3-124 Separate control for top and bottom heat 3 baking decks Oven mobile with locking device Exhaust hood on top with steam condenser Proofing cabinet below Modular system Connection: 400V, 16A-CEE plug Water connection 3/4 inch, water drain for DN 40 Dimensions: 1530 x 900 x 2150 mm (W x D x H) Used oven Options: Water filter Peel device Ihedpfsyaf Rgsx Addst Loader / manual peel Maintenance contract Delivery & installation Training & commissioning We have a large selection of ovens!

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Type: K-200 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 416 cm³ Shot weight: 375 g Iedew Hc Spopfx Addoht Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 47,176 h, screw diameter: 26 mm, overall weight: 4,400 kg, controller manufacturer: FANUC, This FANUC Roboshot S100iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 100t and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. Ihodpjx D Rz Dsfx Addot 2x similar units availabe (47176 + 49071 h) • POWER SUPPLY 200 V∼50/60 Hz, 220 V∼60 Hz

Condition: excellent (used), functionality: fully functional, Unox Bakerlux Stefania Loading Oven Convection oven for 3 trays, 460 x 330 mm Stainless steel design with exhaust hood Manual control Direct water connection for steam injection 230V connection Dimensions: 600 x 665 x 720 mm (W x D x H) Used oven, cleaned Options: Water filter Maintenance contract Ijdpfeyaf D Hex Addjht Spare parts box Delivery service Instruction & commissioning Visit our large Unox showroom!

Condition: ready for operation (used), Year of construction: 2011, operating hours: 68,463 h, screw diameter: 35 mm, This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, it's designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information. • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 61 A • Heating rated current: 58 A Ihjdpsx D Rndofx Addot • Total rated current: 119 A • Total connected load: 78 kW • Calibration (year): 2027 • selection unit: yes • single platen: yes • beam spacing: 470 x 470

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW - Charging station Unox Bakertop X 10 Digital.ID - NEW Convection oven for 10 trays 60x40 cm Exhaust hood on top with steam condenser Proofing cabinet below for 10 trays 60x40 cm Mobile oven with locking casters USB connection Only from us: DGUV V3 tested Connection: 400V, 32A CEE plug Water connection: 3/4 inch, drain: DN 40 Dimensions (W x D x H): 865 x 1100 x 2200 mm Oven NEW & SAB certified 12 months warranty + spare parts service Options: Pure water filter Baking trays Ethernet connection DDC.App Spray & Rinse cleaner Service package Maintenance contract Delivery service Instruction & commissioning Ihjdpfxsyaf Dye Addot Visit our Unox Backtube!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,501 h, screw diameter: 16 mm, overall weight: 4,400 kg, controller manufacturer: FANUC, This FANUC Roboshot S100iA was manufactured in 2016. It's an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 16/20mm. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. • Power supply: 200 V, 50/60 Hz; 220 V, 60 Hz Ijdpfx Aox D Rzdsddeht • Full load amps (FLA): 54.6 A • Short-circuit current rating (SCCR): 5 kA

Year of construction: 2026, condition: new, functionality: fully functional, NEW Unox Lievox X 10 Proofing Cabinet NEW For 10 trays 600 x 400 mm Lighting & glass doors Temperature range up to max. 50°C Convection & humidity control DGUV V3 tested exclusively by us Dimensions: 860 x 1015 x 738 mm (W x D x H) Connection: 220V Brand new unit & SAB certified 12 months warranty + spare parts service Options: Castors/wheels Baking trays 600 x 400 Maintenance contract Ihjdpfoyaf Dtjx Addet Delivery service Service package Training & commissioning Visit us!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 42,581 h, screw diameter: 20 mm, controller manufacturer: FANUC, This FANUC Roboshot S50iA was manufactured in 2016. It is an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 20mm. Consider the opportunity to buy this FANUC Roboshot S50iA electrical injection moulding machine. Contact us for more information. Ihedpfx Adjx D R Ahodjt

Year of construction: 2026, condition: new, functionality: fully functional, Unox Bakertop X 10 Digital ID convection oven Convection oven for 10 trays 600 x 400 mm Unox oven with Intelligent Performance Touch panel with 1,000+ programs Core temperature probe USB connection Top model with AI Isdjyaf Dmjpfx Addjht DGUV V3 safety inspected exclusively by us Connection: 400V, 32A CEE plug Water connection 3/4 inch, drain DN 40 Dimensions: 860 x 1018 x 1219 mm (W x D x H) Oven NEW & SAB inspected 12 months warranty + spare parts service Options: Pure water filter Baking trays Lievox proofing cabinet Ethernet connection for DDC.App Exhaust hood with vapour condenser Spray & Rinse cleaner Service package Base stand Maintenance contract Delivery service Commissioning & user training Visit our large showroom!

Year of construction: 2017, condition: ready for operation (used), overall weight: 56,000 kg, This HAITIAN JU12000II/8400 was manufactured in 2017. It features a screw diameter of 110 mm and operates with a power of 135 kW. The machine runs on AC 400 V, 50 Hz, and can handle a nominal current of 279 A. Weighing 56,000 kg, it's robust for demanding tasks. Consider the opportunity to buy this HAITIAN JU12000II/8400 hydraulic injection moulding machine. Contact us for more information. • Power: 135 kW • Voltage: AC 400 V, 3P / N / PE, 50 Hz • Nominal Current: 279 A • Short-circuit Resistance: 25 kA Ihjdpfx Aoyabwceddst • Screw Diameter: Ø 110 mm

Year of construction: 2014, operating hours: 39,176 h, condition: ready for operation (used), total height: 4,000 mm, product length (max.): 8,700 mm, This FERROMATIK K-TEC 200 2F was manufactured in 2014. A robust hydraulic injection moulding machine, it features a screw diameter of 18 mm and a clamping force of 200 KN. Ideal for working with materials like ABS and PC, it operates on 400V and 50Hz, ensuring efficient performance. Dimensions are 8700mm in length, 2300mm in width, and 4000mm in height. Consider the opportunity to buy this FERROMATIK K-TEC 200 2F hydraulic injection moulding machine. Contact us for more information. Isdsyabtdopfx Addeht • Clamping Force 200 KN • Screw Diameter: 18 mm • Previous Material Use: ABS, PC • Turning System (HxV): 750 x 750 mm • Power Rating: 192 KW • Voltage: 400V, 50Hz Dimensions Machine Depth 2300 mm

Year of construction: 2016, condition: ready for operation (used), This HAITIAN JU9000II/6800 PLUS was manufactured in 2016. It is a hydraulic injection moulding machine featuring a power consumption of 126 kW and a rated current of 207 A. It operates on AC 400 V, 3-phase / N / PE, 50 Hz. Consider the opportunity to buy this HAITIAN JU9000II/6800 PLUS hydraulic injection moulding machine. Contact us for more information. • Voltage: AC 400 V, 3-phase / N / PE, 50 Hz • Power consumption: 126 kW • Rated current: 207 A Isdsyabq Nepfx Addsht • Short-circuit withstand capacity: 25 kA

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: ENGEL, controller model: n/a, overall weight: 10,500 kg, This Engel Elast 1500/250V was manufactured in 2004. It's a vertical injection moulding machine designed for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel Elast 1500/250V vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits Ihjdpfox U U Ixsx Addot • 3 machines available - note that one of the available machines has a defective control unit. • Rated voltage: 3 x 400v • Frequency: 50 hz • Connected load: 64kw • Rated current: 107a • Control voltage: 230 v Extra Information Machine still under power

Year of construction: 2020, condition: ready for operation (used), overall weight: 28,400 kg, This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Additional equipment • The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) Machine Benefits Technical Machine Benefits • Pump hours in operation: 1769 hours, hours in automatic cycle: 695 hours Iodpfex U Tqrox Addeht • Clamping force: 5000 kn / injection unit: 4600 • Opening stroke: 900 mm / distance between bars: 920 x 920 mm / mould height min-max: 400-1050 mm • Size of mold platens: 1280 x 1280 mm / ejector stroke: 250 mm / ejector force: 86 kn Extra Information The machine has been used very little

Condition: ready for operation (used), Year of construction: 2011, clamping force: 6,500 kN, screw diameter: 90 mm, This Engel DUO 4550/650 was manufactured in 2011. It features a clamping force of 6500 kN and a maximum opening stroke of 1650 mm. The machine supports a mold height ranging from 400 mm to 2000 mm and a platen size of 1510 × 1440 mm. The screw diameter is 90 mm, enhancing its injection capabilities. Consider the opportunity to buy this Engel DUO 4550/650 hydraulic injection moulding machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Net clamping/injection unit: 20 / 10 tons • Opening force (with pressure pad): 510 kn • Opening force: 190 kn • Platen size (h × v): 1510 × 1440 mm • Tie bar diameter: 175 mm • Mold weight (max): 11000 kg • Dry operation (euromap 6) time: 2. 9 sec • Dry operation (euromap 6) stroke: 700 mm Extra Information Injection Unit Screw stroke: 390 mm Iodpfx Adox U Tmysdeht Injection capacity: 2480 cm³ Screw torque: 97 kNm L/D ratio (3-zone screw): 27 Recovery rate (3-zone screw): 104 g/s L/D screw length (Barrier): 22 Plasticizing capacity (Barrier): 135 g/s Injection rate: 720 cm³/s Injection rate (with increased injection pressure): 630 cm³/s Injection pressure (regenerative): 1910 bar Specific injection pressure (increased): 2180 bar Nozzle stroke: 600 mm Nozzle contact pressure: 150 kN Heating capacity (standard): 62 kW Number of heating zones (incl. nozzle): 9 Rated drive power: 90 kW

Year of construction: 2016, condition: ready for operation (used), This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information. Machine Benefits Technical Machine Benefits Iodex U Tihepfx Addeht • Connected load: 84 kw • Nominal voltage: 3 x 400 v • Control voltage: 24 v • Safety distance: 310 mm • Overrun time: 128 ms • Overtravel: 62. 3 mm • Max platform height: 750 mm • Platform dimensions: 1850 x 1300 mm • The systems are fully functional and were used in 2/3-shift operation between 2017 and 2022. • The spray cylinders were resealed and the insulation panels replaced in 2023. Extra Information Machine still under power

Year of construction: 2004, condition: ready for operation (used), This Arburg 720 S 3200 -1300 was manufactured in 2004. A hydraulic injection moulding machine featuring an operating voltage of 400 V, control voltage of 24 V, and a total connected load of approximately 39.0 kW. Consider the opportunity to buy this Arburg 720 S 3200 -1300 hydraulic injection moulding machine. Contact us for more information. Ihsdpfx Adox U D A Esdet

Year of construction: 2016, operating hours: 48,336 h, condition: ready for operation (used), This Engel victory 1800/300 was manufactured in 2016. A hydraulic injection moulding machine with a 300-ton machine power, it features a screw diameter of 60 mm and supports up to 16 hot runners. Equipped with four hydraulic core pullers and a Viper 12 robot, it offers enhanced automation capabilities. Contact us for more information about this machine. • Machine power (tons): 300 • Between columns w x h (mm): 750 x 1000 • Min. mold height (mm): 400 • Max. mold height (mm): 900 • Max. distance between plates: 1300 • Diameter of center ring / height: 160/15 • Diameter of thread on ejector coupling: M24 • Diameter of screw (mm): 60 • Hot runners: 16 • Hydraulic core pullers: 4 Iodpfxex U Dp Eo Addjht • Robot: Viper 12

Year of construction: 2018, condition: ready for operation (used), This HAITIAN JU12000III was manufactured in 2018. A robust hydraulic injection moulding machine, it features a power supply of AC 400 V, 3-phase + N + PE, 50 Hz, and an input power of 148 kW. Rated current stands at 243 A. CE compliant, consider the opportunity to buy this HAITIAN JU12000III hydraulic injection moulding machine. Contact us for more information. • Power Supply: AC 400 V, 3-phase + N + PE, 50 Hz Iedpfex U Dl Hsx Addeht • Input Power: 148 kW • Rated Current: 243 A • Short-circuit Withstand Rating: 25 kA • Certification: CE compliant

Year of construction: 2018, condition: ready for operation (used), overall weight: 70,000 kg, This HAITIAN JU13000/IIH was manufactured in 2018. It features a robust hydraulic injection moulding system with a screw diameter of Ø 110 mm and an injection unit of 8400. Powered by AC 400 V, 3-phase + N, 50 Hz, it has an installed power of 160 kW. The machine weighs 70,000 kg and is CE certified. Consider the opportunity to buy this HAITIAN JU13000/IIH hydraulic injection moulding machine. Contact us for more information. Ijdpjx U Di Sjfx Addsht • Power Supply: AC 400 V, 3-phase + N, 50 Hz • Installed Power: 160 kW • Rated Current: 247 A • Short-circuit Withstand: 25 kA • Documentation: JU13000/IIH • Certification: CE

Year of construction: 2016, operating hours: 24,285 h, condition: ready for operation (used), controller manufacturer: FANUC, overall weight: 4,400 kg, screw diameter: 36 mm, This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. • Power supply: 200 V 50/60 Hz; 220 V 60 Hz • FLA (Full Load Amperage): 54.6 A Isdpfx Aex Utzdjddjht • SCCR (Short-Circuit Current Rating): 5 kA • Increased closing force -> 180t • HOPPER FLANGE SET GR4 • I/O BASE UNIT • CABLE KIT • ANALOG OUTPUT MODULE ADA02A • 8-02 ANALOGUE CORE FUNCTION • CORE PULL 2-FOLD ANALOGUE_MOB • NOZZLE ADAPTER D16 M36X4/M24X1.5 • 7-01 EUROMAP 63 INTERFACE • NOZZLE TIP FOR ARBURG M24X1.5