Used Baking Moulds for sale (2,119)

Condition: good (used), Year of construction: 2007, Ref. no.: 18588 Hersteller: BATTENFELD Type: EM 30/55 Unilog B6 Run hours: 3.200 Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Kodpfx Aoxdk Auoddedg Opening width: 580 mm Platen size (h x v): 450 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg

Condition: ready for operation (used), A total of three Ferromatik injection molding machines are available. 1) Ferromatik K155, clamping force: 1550kN, max. platen distance: approx. 950mm, min. mold height: 300mm, max. opening stroke: 650mm, tie bar distance: 500mm/500mm, platen dimensions X/Y: 750mm/750mm, weight: approx. 8000kg. The machine has a leakage in the area of the hydraulic cylinders for the aggregate movement. 2) Ferromatik K200, clamping force: 2000kN, platen dimensions X/Y: 830mm/830mm, tie bar distance: 560mm/560mm, opening stroke: 650mm, daylight: 1000mm, min. mold height: 350mm. Machine dimensions X/Y/Z: approx. 7300mm/1800mm/2300mm, weight: approx. 10000kg. 3) Ferromatik K275, clamping force: 2750kN, min. mold height: 350mm, tie bar distance: 630mm/630mm. Machine dimensions X/Y: 8000mm/2300mm, weight: 13600kg. The machines are sold without handling. Documentation vorhanden. An on-site inspection is possible. Kdodpfx Asxxa S Ieddog

Condition: used, Year of construction: 1975, machine/vehicle number: SN: 75.1019, DISAMATIC 2032 A SN: 75.1019 Date of manufacture: 1975 Dimensions: DISAMATIC 2032 A: 8011 x 1600 x 2950mm (length x width x height) Control room: 2400 x 1900 x 2300mm (length x width x height) Weight: ca 32t (without hydraulic oil) Mold dimensions: Height: 600mm Width: 775mm Thickness: min. 150mm / max. 400mm The thickness of molds depends on chamber depth, molding pressure, molding boards, pressure of sand shooting, molding sand properties. Pressure on molds urface: To be set up between 0 and 22kp/cm² Efficiency: 300 molds per hour (coreless/thickness of mold 200mm) Current fficiency: 150 molds per hour Max. unit weight of casting: approx. 40kg net Molding sand consumption: max. 85m³ per hour Air consumption: max. 14m³ per min. Air pressure: min. 6kp/cm² max. 10kp/cm² Electric power system: Power demand: 59.5kW 1) main engine - 37kW 2) servo motor – 7.5kW 3) heating parts – 13kW 4) control system – 2kW Control voltage: 110V AC MOULDING CHAMBER DIMENSIONS Top Plate # 774.8 x 710 x 30mm Side Plate, right # 810 x 710 x 30mm Side Plate, left # 810 x 710 x 30mm bottom plate # hardchromed 1-side 2311 x 774.8 x 8mm PMC SYSTEM -PMC cappingstrips Dimensions: Width: 775mm Length: 18m Weight: ca 8t Air consumption: Average consumption: 0.5m³/min Max. consumption: 2.5m³/min Kedpfx Aevyc T Uoddjdg ----- Lack of CSE – "QUICK CORE MASK CHANGE" Lack of QPC – "QUICK PATTERN PLATE CHANGING UNIT" ----- Molding machine DISAMATIC 2032 A is integrated with pouring furnace BBC XCQ 44 with capacity 4.4t s inductive furnace is equipped with heated inductor with max. power 120kW and bottom-pour stopwatch. Molding line is connected with knockout grid. We're ready to sell whole molding line, including extra facilities. Machines are in goods hape, mechanically and electrically efficient.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Minimum processable height: 6 mm Maximum processing height: 120 mm Minimum processing length: 370 mm Maximum processing length: 8,483 mm Minimum processing width: 25 mm Maximum processing width: 230 mm Maximum feed speed: 12 m/min Drive rollers Number of rubber rollers: 1 Number of gear rollers: 4 Total number of rollers: 5 UNITS Unit 1 Saw spindle: bottom Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 2 Saw spindle: right Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Unit 3 Saw spindle: left Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 4 Saw spindle: top Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Kdedpfx Ajxw U Syoddjg Control type: Siemens Simatic Panel Touch Installed total power: 24 kW EQUIPMENT CE marking

Condition: used, Year of construction: 2007, clamping force: 420 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,000 kg, load hours: 53,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request Kodpsxr N Urofx Addedg terms of payment: 100% prior to delivery

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding facilities with two Husky injection molding machines, five complete tools with metal separator, gravimetric Motan mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of construction: 2015, max. shot weight: 2424g, max. PET throughput: approx. 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color mixing devices and T-conveyor. Documentation available. An on-site inspection is possible. Kdodpfxsw Az Ris Addog

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Wiesheu combination oven - Ebo 128 S Backofen - GS1 Ebo 128 Garschrank In clean condition and working properly. For more information please contact. Kdsdpfst Sld Asx Addjg

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Kodpfxotyaypo Addodg

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 55M - Year of construction: 2007 Kodpfxstpf N Uo Addjdg - Screw diameter: 32mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210

Condition: used, Year of construction: 2004, clamping force: 130 kN, displacement volume: 230 cm³, injection pressure: 1,670 bar, overall weight: 4,500 kg, load hours: 60,000 h, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Kjdjxqhr Tjpfx Addedg

Year of construction: 1999, condition: ready for operation (used), An old Arburg injection molding machine and five HB-Therm temperature control units are available. 1) Injection molding machine Arburg Allrounder 270S 250-70, clamping force: 250kN, tie bar distance: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, mold height range: 200mm/550mm. 2) Temperature control unit HB-Therm HB-W 140, year of manufacture: 1999, max. temperature: 140°C, flow rate: 40l/min, max. operating pressure: 12bar, machine dimensions X/Y/Z: approx. 650mm/300mm/1000mm, weight: approx. 75kg. An on-site inspection is possible. Kdedpfx Aoxvdfajddeg

Condition: ready for operation (used), Year of construction: 2009, Injection Unit Screw diameter 180 mm Clamping Unit Clamping force 3300 kN This OiMA SACMI 3300-180 was manufactured in 2009. It features a robust electric-hydraulic hybrid drive and an integrated cooling system. The machine is equipped with a GDNet communication interface for real-time monitoring and diagnostics, ideal for producing medium-to-large plastic components. Consider the opportunity to buy this OiMA SACMI 3300-180 hydraulic injection moulding machine. Contact us for more information. Application Types Kjdpfx Adjx D I R Aodedg Injection Moulding

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 1850 Measurements depth 5800 mm Measurements height 2200 mm Machine weight 9400 kg Injection Unit Screw diameter 45 / 48 / 50 mm Shot weight 229 / 289 / 357 g Stroke volume 286 / 318 / 393 cm³ Injection pressure 2494 / 1970 / 1878 bar Kjdpfxex D Rwrj Addsdg Screw speed 270 rpm Clamping Unit Clamping force 1800 kN Opening stroke 540 mm Max open daylight 1230 mm Mould height min 300 mm Mould height max 790 mm Ejector stroke 200 mm Ejector force for / back 49 kN This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Kdedpfx Asx D Rq Ejddeg

Year of construction: 2011, condition: ready for operation (used), General Data Measurements width 1.42 m Kdodjx D N D Dspfx Addjg Measurements depth 4.36 m Measurements height 1.95 m Machine weight 4700 kg This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2006, condition: ready for operation (used), General Data Measurements width 2650 mm Measurements depth 9360 mm Measurements height 2430 mm Machine weight 43400Kg Injection Unit Screw diameter 80 mm Clamping Unit Opening stroke 1150 mm Distance between bars 1000 x 930 mm Additional Equipment Core Valve: 1 Kjdpfjx I S Snjx Addsdg Air Valves: 3 EU 12 for Robot Connection: Yes Attached you will find some drawings with fundament and platens. This Krauss Maffei 600 - 3500 C3 hydraulic injection moulding machine was manufactured in 2006. It features a tie bar distance of 1000 x 930 mm and an opening stroke of 1150 mm. Equipped with 1 core valve, 3 air valves, and a screw diameter of 80 mm, it also includes an EU 12 connection for robot integration. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: good (used), For sale: Kdjdpfxjrt Uw Ro Addsg Baking trays with gutters brand: SASA number of pieces in total: 550 baking trays total price: €25,000 dimensions: Length: 200 cm width: 80 cm height: 5 cm gutter width: 9.5 cm number of gutters per plate: 21 gutters The baking trays come from a current Mecatherm Line See also the photos All as good as new and still provided with a Teflon layer and all the plate are stainless steel. Viewing is possible on location If you have any questions, we'd love to hear from you! Kind regards, Leo Holland for sale: baking trays with gutters brand: SASA total number of pieces: 550 baking trays total price: 25,000,- dimensions: Length: 200 cm width: 80 cm height: 5 cm width gutter: 9.5 cm number of gutters per plate: 21 gutters See also the photos All as good as new and still provided with Teflon layer and all plates are made of stainless steel The baking trays come from a current Mecatherm Line Viewing is possible on location If you have any questions, we would like to hear from you! kind regards, Leo Holland

Condition: used, for sale: approximately 900 pieces €25 per plate bakeware Bi8nsugvb0n corrugated plates dimensions: 150 cm x 80 cm x 5 cm 20 gutters per plate gutter width: 7.5 cm on-site viewing is possible if you have any questions, we would love to hear from you kind regards, Leo Holland for sale: approximately 900 pieces €25 per plate bakeware corrugated plates dimensions: 150 cm x 80 cm x 5 cm 20 gutters per plate gutter width: 7.5 cm Kdodpoq D A Rgjfx Addeg on-site viewing is possible if you have any questions, we would love to hear from you Kind regards, Leo Holland

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Kdodpfx Adequuvrodeg Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. High Pressure compressor - KAESER Booster N 753 - G 13 bar / 40 bar" 4. Air Dryer 5. Receiver tank - Low pressure - MAX 16Bar 6. Receiver tank - High pressure - MAX 45Bar

Condition: good (used), Code: 0234 Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Kedpexukguefx Addsdg Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Suction inlet diameter 150 mm Overall dimensions mm 4800 x 1650 x 1450 h Weight kg 3000

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, General Data Machine weight 8700 kg Measurements height 2095 mm Dimensions Machine Length 5155 mm Kdsdsx Nr Huopfx Addjg Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 1600 kN This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Kjdpfx Aox Nr Uxeddjdg Machine Length 7800 mm Injection Unit Screw diameter 90 mm Clamping Unit Clamping force 5000 kN This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 37,235 h, General Data Machine weight 5300 kg Measurements height 1932 mm Dimensions Machine Length 3974 mm Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 800 kN This Engel Victory 330/80 Tech was manufactured in 2015. It features a clamping force of 800 kN, a screw diameter of 35 mm, and a maximum injection volume of 154 cm³. The machine dimensions are 3974 x 1437 x 1932 mm, weighing 5300 kg. Currently in production with excellent condition and 37,235 operating hours. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 330/80 Tech machine we have for sale. Contact us for more information. Kdjdox Nr Hzspfx Addeg Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 47,013 h, General Data Machine weight 12200 kg Measurements height 2300 mm Dimensions Machine Length 5861 mm Kjdpfxox Nr Rms Addjdg Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 1800 kN This Engel VICTORY 750/180 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 1,800 kN and a screw diameter of 50 mm, it supports a maximum injection volume of 393 cm³. Currently in production and in excellent condition, this machine also includes a robot interface EUROMAP 67. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, General Data Machine weight 14000 kg Kdodpfsx Nr R Hsx Addeg Measurements height 2355 mm Dimensions Machine Length 7800 mm Injection Unit Screw diameter 105 mm Clamping Unit Clamping force 6500 kN This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding