Used Bale Shredder for sale (1,348)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Tsdpfx Anszp H R Eolob Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: new, Year of construction: 2022, Dear Customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. Tedpfx Asku Abisnlob This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! Shredding Machine 630 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 30 pieces, concave, multiple rotation Rotor diameter: 260 mm Rotor design: EcoRings Control: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Screen size: 10 - 12 mm Suction nozzle Ø 160 mm

Condition: used, Year of construction: 2003, Technical details: pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Tedpfxezgvhus Anlob Bedienung über Schalttafel *

Condition: used, Year of construction: 2005, Technical details: pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Tedszgvhhepfx Anleb Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Bedienung über Schalttafel *

Condition: used, Year of construction: 2006, * Doppstadt DW 2560 E-1 electric shredder / wood chipper * Year of manufacture: 2006 * ??Complete repair invoice available?? * Incl. control cabinet * Incl. supports * Weight: 25,000 kg Tedsyw Exaspfx Anleb * More pictures and videos via Whatsapp * All information subject to change and prior sale reserved.

Condition: used, Year of construction: 2021, operating hours: 2,338 h, * Arjes Titan 900 Shredder * Year of manufacture: 12-2021 * Operating hours: 2,338 h Todpfx Ajyq Dabonlsb * Volvo engine 565 KW * Remote control * Weight approx. 35,000 kg * More pictures and videos via Whatsapp * Information given without guarantee; prior sale reserved.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Waste disposal system with a central Vecoplan rotary shredder The core of this waste disposal system is a high-performance Vecoplan rotary shredder, type 55/18/3. The system handles the fully automated shredding and processing of edgings, slabs, residual wood, and bark from sawmill production. All material flows are automatically detected, processed, and fed to the respective discharge systems – for efficient and continuous production. Highlights High-performance Vecoplan rotary shredder 55/18/3 Continuous shredding of residual wood, slabs, and edgings Robust industrial design for multi-shift operation Integrated metal detection system to protect the machine Vibrating screen with separation into four material fractions Automatic conveyance of wood chips, sawdust, and bark Scraper chain conveyors and vibrating chutes for continuous material flow Complete electrical control system including system cabling Key technical data Drive power: 55 kW Infeed opening: 550 × 180 mm Rotor diameter: 600 mm Tsdpfx Anszwb Unjlob Rotor speed: 730 rpm Throughput capacity: up to 10 cubic meters/h Wood chip length: approx. 25 mm Screen hole diameter: 30 mm Vibrating screen: 3 screen levels Material separation: 4 fractions

Condition: ready for operation (used), Year of construction: 2022, We are offering this used shredder for sale, manufactured in 2022. Tjdpoztxpbofx Anlob Motor type: AMMF 90L BA4 Frequency: 50 Hz Power: 1.5 kW Voltage: 230 V Current: 9.3 A If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, overall weight: 20,000 kg, power: 202.26 kW (275.00 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C7.1, Shafts with 7/7 discs, each with 5 knives Crushing bar with comb Robust hooklift frame Wheel axle with drawbar Permanent overbelt magnet Water spray system Tsdpfjzh Hgwjx Anlsb

Condition: good (used), Used shredder in good condition for sale. Serviced on August 26th. * Available at a special price of €9,950 net plus VAT, ex works Neckartailfingen. Tjdpfezu Rz Sex Anljb For shredding hard and soft wood of all types. Engine: 15 kW Used machine, sold as is. Functional guarantee upon handover.

Condition: excellent (used), Catalogue number 7973 TECHNICAL DATA - feed opening width: 410mm - feed opening height: 210mm - shaft width: 430mm - shaft diameter: 330mm - knife length: 430mm - number of knives: 2 pcs - screen dimensions: 50x50mm - lower toothed feed shaft - lower shaft motor: 1.1kW - upper toothed feed shaft Tsdpfx Aozw I Hkjnlsb - upper shaft motor: 1.1kW - vibrating chute - vibrating chute length: 4160mm - vibrating chute width: 370mm - main motor: 45kW - auto-reverse (adjustable) - reverse mode - machine overall dimensions (L/W/H): 2150x1450x1050mm - vibrating chute overall dimensions (L/W/H): 4160x650x880mm - weight approx. 2500kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload – Reverse mode – DTR technical documentation – Used shredder, in very good condition Net price: 73,900 PLN Net price: 17,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Tsdpfx Answh Naijleb Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Catalogue No.: 7536 – German-made – No engine – Used chipper TECHNICAL DATA Feed opening width: 530 mm Number of knives: 2 pcs Shaft diameter: 580 mm Feed opening width: 420 mm Tsdpfx Anezwwy Hjlsb Feed opening height: 200 mm Net price: 30,000 PLN Net price: 7,140 EUR (at 4.2 EUR rate) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7374 TECHNICAL DATA - Upper feed hopper dimensions (L/W): 840x620 mm - Lower feed hopper dimensions (L/W): 300x300 mm - Rotor width: 340 mm - Motor: 22 kW - Screen: 15 mm - Number of knives: 6 pcs - Discharge for shredded wood: Ø 160 mm - Dimensions (L/W/H): 1400x800x2000 mm - Weight: 840 kg ADVANTAGES – German-made – Very good condition – Used wood chipper Net price: 23,900 PLN Net price: 5,690 EUR based on an exchange rate of 4.2 EUR Tedpfxozwwx Aj Anlob (Prices may vary significantly with currency fluctuations)

Condition: excellent (used), Year of construction: 2017, CATALOGUE NUMBER 8014 TECHNICAL DATA - inlet width 540mm - inlet height 260mm - roller width 560mm - roller diameter 590mm - number of knives on the roller 4 pcs - feed rollers, geared, top and bottom 2x4kW Todpfx Anozwwpujlsb - screen 40x35mm - electric auto-reverse (adjustable) - reverse gear - vibrating feeder 2.2kW - vibrating feeder length 6000mm - vibrating feeder width 500mm - capacity approximately 12-16 m³/h (depending on the type of material being shredded and the screen opening) - main motor 75kW - automatic hydraulic lifting function for the upper feed roller - overall dimensions of the vibrating feeder 6000x950x1600mm - overall dimensions of the machine L/W/H 3400x1700x2000mm - total weight approximately 6000kg ADVANTAGES - vibrating feed table 6000mm - electric auto-reverse (adjustable) - reverse gear - manufactured by the Polish brand OSKA - electrical diagram, DTR documentation + CE - unpainted - used shredder, very good condition Net price: 179900 PLN Net price: 42834 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm - Infeed height: 200mm - Shaft width: 630mm - Knife length: 630mm Tjdpfxjzwwpbo Anlsb - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2014, maximum speed: 80 km/h, overall weight: 1,800 kg, empty load weight: 1,800 kg, operation weight: 1,800 kg, mobility: mobile, machine/vehicle number: 3314051396, The machine runs perfectly. Tedsy Amidepfx Anlob If you have any questions, feel free to call us. Price: €10,710 incl. VAT, €9,000 net (export) • Machine Manufacturer: Jensen Model: A425DI Type: engine-driven chipper / wood chipper Designation: SDAH work machine Serial number: 3314051396 Additional ID: 6412 0899 First registration: 16/06/2014 • Technical specifications Feed system: hydraulic feed with two rollers Maximum log diameter: approx. 200 to 220 millimeters Chipping system: disc chipper Discharge: rotating discharge chute • Engine Engine type: diesel Type: ATZ Power: 24.3 kW • Dimensions and weight Weight: approx. 1,800 kilograms Chassis: trailer Hitch: car trailer hitch • Features Hydraulic feed with forward and reverse Emergency stop system Safety bar at intake Adjustable discharge chute • Fields of application Professional use in Arboriculture Gardening and landscaping Municipal work Shredding wood and branches

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tjdpfx Anozqr Nioleb Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Bale Weight: 480 kg Binding: manual Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Tedjzqr Irepfx Anleb Our payment condition is 100% advance payment.

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Tsdoympx Uepfx Anljb

Condition: excellent (used), Catalog number: 8045 TECHNICAL DATA - inlet width: 520mm - inlet height: 220mm - shaft diameter: 650mm Tedpezmf Azofx Anlob - shaft width: 510mm - blade length: 510mm - number of blades: 2 pcs - 2 x toothed pull shaft, bottom, 4kW - 2 x toothed pull shaft, top, 3kW - main motor power: 55kW - conveyor belt length: 5200mm - conveyor belt width: 620mm, 0.12kW - machine dimensions (L/W/H): 3100x1200x1300mm - weight: approx. 4000kg ADVANTAGES – automatic reversing with adjustable settings – with a 5200mm conveyor belt – German-made – very good condition – used shredder Net price: 88900 PLN Net price: 21167 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - knife length 530mm - number of knives 2 pcs - screen dimensions 65x65mm - lower toothed feed roller - lower roller motor 2.2kW - upper toothed feed roller - upper roller motor 2.2kW - belt feeder - feeder belt length 2200mm Todpfxjzmfu Rj Anljb - feeder belt width 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approx. 3000kg ADVANTAGES – German made – auto-reverse (adjustable) – DTR technical documentation – used shredder, very good condition Net price: 75,900 PLN Net price: 18,070 EUR depending on EUR/PLN rate 4.2 (Prices may change in case of higher fluctuations)

Condition: used, Year of construction: 2018, Avermann baling press, type AVOS 1810 BRK-90/100, year of manufacture 2018, cross-tying Tsdpfx Aozqc Ngsnljb Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of the feed hopper: 1,800 x 1,000 mm Throughput capacity at 35 kg/m³: 15.0 t/h Throughput capacity at 60 kg/m³: 20.0 t/h Throughput capacity at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on the material Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: repair required (used), functionality: limited functionality, Year of construction: 2001, Installation for crushing waste from construction site bins and demolition concrete, manufactured by DBT. The technical specifications are presented in the attached documents. This machine will be sent to the workshop for a major overhaul of the jaw crusher drive system. The electric motors and gearboxes will be inspected. The unit will be disassembled and sandblasted before applying a rust-proof coating, followed by a two-layer varnish. CE marking will be applied. Tsdpfszxh N Uox Anlob

Condition: used, Year of construction: 2010, functionality: limited functionality, pressing force: 110 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale length: 1,200 mm, bale height: 800 mm, bale weight: 500 kg, type of input current: three-phase, input voltage: 400 V, input current: 161 A, overall weight: 36,000 kg, oil tank capacity: 1,500 l, power: 90 kW (122.37 HP), input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used EUROPRESS channel baling press, model 8300 V 5 K, manufactured in 2010. Type: Channel baling press 8300 V 5 K Factory number: 10060294 Drawing number: 2300000 Year of manufacture: 2010 Tedpfx Anezwpdwjleb Weight: approx. 36,000 kg Rated voltage: 3 x 400 V / 50 Hz Drive power: 90 kW Rated current: approx. 161 A If you have any questions or require further information, please feel free to send us a message or call us.