Used Shredding for sale (822)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: 189, power: 310 kW (421.48 HP), fuel tank capacity: 500 l, TECHNICAL DETAILS Cutter drum with teeth: 30 Areas of application: Waste/Wood/Green waste MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank capacity: 500 l Electrical system: 24 V Hydraulic connections: 35-80 l/min Permissible total weight: 27,000 kg Ffjdpfx Aoym U E Hja Eow Load capacity protection: Three-sided Operating hours: 3,200 h EQUIPMENT Overband magnet Shredder drum with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Complete radio remote control Large maintenance doors on the sides Service-friendly engine compartment Hydraulically reversible fan Folding hopper Service staircase Acoustic start-up warning Doppstadt telematics system Special shredder system size L 600/4 - 30 Z Additional hydraulic connections Hydraulic drive Discharge conveyor Frame with overband magnet Magnet and combs

Condition: used, Year of construction: 2022, operating hours: 4,240 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Ffodeyhckmjpfx Aa Eow Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: ready for operation (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, machine/vehicle number: 217, fuel tank capacity: 500 l, conveyor belt speed: 3,000 mm/s, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours and comprehensive additional equipment! TECHNICAL DETAILS Number of shredding teeth: 20 Shredding system type: Size L Feed hopper loading height: 3,650 mm Feed hopper loading width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Belt speed: 1.25 – 3.0 m/s Cross conveyor length: 2,900 mm Cross conveyor width: 800 mm MACHINE DETAILS Chassis: 3-axle drawbar trailer unit Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Fsdpeyg Iraofx Aa Eofw Rated power: 260 kW (353 hp) Emission standard: Stage V Fuel tank capacity: 500 l Transport dimensions (L x W x H): 9,141 x 2,540 x 3,604 mm Permissible total weight: 25,000 kg Permissible axle load: 9,000 kg per axle Operating hours: 119 h EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Centrally arranged lubrication strips 24-V electric control - additional electric pump for operating the following functions when the engine is off: - Raise/lower/fold rear discharge conveyor - Open/close comb flap - Open/close comb - Raise/lower folding hopper Full radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Shredding system Size L - 20 teeth Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive 350 mm hopper extension, dual-sided watering provision 7 m rear discharge conveyor Neodymium cross belt magnet Frame for 7 m cross belt magnet

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine Fodpfx Asxu Dipsa Ejfw • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.

Condition: good (used), Year of construction: 2022, operating hours: 600 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation Ffjdpfx Aasvrz Rvo Ejw

Condition: used, Year of construction: 2021, operating hours: 4,826 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm meets EUROMOT V emissions standard Ffedsvnmldjpfx Aa Ejw Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW – VARIO - Load sensing system Fuel tank 950 liters Longitudinal belt: belt length 4,450 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control Additional electric pump for operating the following functions when the engine is not running. Raise/lower/fold rear belt, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding funnel Radio remote control complete Large side GRP maintenance doors Maintenance-friendly engine compartment with LED light Hydraulically reversible fan wheel Loading protection on both sides Fire extinguisher Maintenance ladder Tool box Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Special equipment: 500 mm chain chassis unit Chain chassis 500 mm flat Crushing system size "L" -VARIOMAT Size "L" - "Limiter" (20 pieces) Rear conveyor length 7 m 1200 mm wide LED light package engine compartment and rear Irrigation with funnel attachment H=300mm Frame for overband magnet Overband magnet 2 t permanent

Condition: good (used), Year of construction: 2022, operating hours: 2,100 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Fjdpfswnfwqjx Aa Esfw Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: good (used), Year of construction: 2020, operating hours: 881 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Fsdpfx Aovnmmzea Esfw Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2021, operating hours: 200 h, functionality: unexamined, Equipment: Methor chain basic package Fjdpfjvnq Trex Aa Esfw Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Crushing system size L (8 teeth) Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Ffsdjxx Tigspfx Aa Esw Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Ffsdpoxx N T Iofx Aa Eow Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan Fodjxx N Dgepfx Aa Esfw - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Ffedpfx Aaovnq Rko Eow Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2020, operating hours: 3,000 h, functionality: fully functional, TANA Shark 440 DT Eco Ffjdjycdu Aopfx Aa Esw 399 kW Available with overband magnet and separate screen basket Good condition Immediately ready for use

Condition: used, Year of construction: 1995, operating hours: 10,500 h, functionality: fully functional, overall weight: 18,000 kg, Model: AK 300 Year of manufacture: 1995 Location: NRW region Operating hours: approx. 10,500 hrs Availability: Short-term, by arrangement Basic equipment: Mobile shredder, mounted on a central axle trailer chassis for 80 km/h Total weight approx. 18,000 kg Mercedes Benz V8 OM 442 LA, 124 kW (approx. 300 HP) Hydrostatic drive Fedpfjyglktjx Aa Eefw Remote radio control 600 l diesel tank Registration documents, spare parts list, and operating manual available. Condition of the machine: The machine is in good technical and visual condition and ready for use. Warranty: The machine is sold in the condition existing at the time of handover. The seller does not provide any warranty for defects. This is not a binding offer. Subject to prior sale and technical modifications. All information subject to change without notice.

Condition: excellent (used), Year of construction: 2008, Complete system including conveyor belt, storage containers, blowers, and large silo (approx. 5 x 5 m footprint) for sale. Dismantling must be carried out by the buyer; forklift available on site. Export only! Ffjdpjyki Nbefx Aa Esw

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Fjdpfsxx Rvkjx Aa Esfw Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Tires 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Additional equipment: Special paint in DB6841 MB-Trac Green Hydraulic travel drive Fuel tank 600 l Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Impact plate with wear strip and additional tooth row Delivery date by arrangement

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system Fsdpfx Asxd T Hcoa Eefw - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon

Condition: new, Year of construction: 2026, Belts and Accessories We offer top-quality conveyor belts suitable for all common screening machines and shredders. Custom-made to your specifications, we guarantee reliable performance and long service life. Suitable for Screening Machines - Doppstadt SM 518 / SM 618 / SM 620 / SM 720 - Terra Select T4 – T7 - Komptech Max - Mustang and other models Suitable for Shredders - Doppstadt Bison / Buffalo / Mammoth, Biopower, Inventhor - AK 430 / 510 / 635 - and other popular models Ffodpfx Ajyg D S Nja Eow Technical Features & Versions - Length: unlimited, tailored to customer requirements - Width: up to 1,800 mm - Number of plies: 2, 3, or 4 as required - Various profiles for optimal conveying performance - Steel cord quantity: 10 cm / 35 ±1 - Various material thicknesses available Your Advantages - Custom manufacturing according to your specifications - Superior quality for maximum service life - Short delivery times for rapid availability - Reliable performance for all common machines Contact us for a tailored quote and advice on conveyor belts for your application.

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm Fedpeh Di H Dofx Aa Esfw -Dimension 880/1390/H2060 mm -Weight 640 kg

Condition: refurbished (used), Year of construction: 2008, Doppstadt DZ 750 Kombi Fsdpfxjygnbbj Aa Eefw - Year of manufacture: 02/2008 - Pre-shredder roller with 21 teeth - 2 x overband magnet - Central lubrication - Remote control - Mercedes Benz engine 480 kW (652 HP) at 1,900 rpm - Weight 46,000 kg - Secondary shredding rotor with 36 free-swinging hammers - Screen basket 120 mm (other screen baskets available) - Rear discharge belt 7 m - Rotor with 36 hammers Machine is overhauled and immediately available.

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. Ffjdpfswzarcex Aa Esw We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Fedpfogbkkrsx Aa Eefw Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,922 h, Doppstadt Inventhor Type 9 Engine Type: Diesel engine Make: MTU 6R 1300 Emission Standard: Stage V / EUROMOT III A Rated Power: 390 kW / 530 HP Fuel Capacity: 1,000 l Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt Speed: 2.0 m/s Discharge Height: 5,050 mm Feed Hopper Loading Height: 3,307 mm Drum Number of Drums: 1 Drum Length: 3,000 mm Drum Diameter: 600 mm Drum Speed: -5 – 32 rpm Fsdpfsxcx Snox Aa Esfw Number of Tools (inserts): approx. 42 MACHINE DETAILS Total Weight: 33,000 kg Length: 16,786 mm Width: 2,500 mm Height: 5,050 mm Transport Width: 2,500 mm Transport Height: 3,893 mm Transport Length: 9,973 mm Operating Hours: 4,724 h EQUIPMENT - Additional equipment: Overband magnet - New stepless drive concept with VarioDirect Drive - No engine load caused by start-up torque thanks to load-free drum positioning - Self-cleaning function for the wrapping unit - Flexible shredding concept with various application packages - New door and housing design for improved maintenance access - Quick fold-out conveyor system at the push of a button - State-of-the-art monitoring concept - Reduced noise emissions Machine has been overhauled and is immediately available!!!!!

Condition: new, Year of construction: 2025, Economical solutions with short delivery times Conveyor belts suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T4-T7, Komptech Max, Mustang and others Conveyor belts suitable for all common shredders such as Doppstadt Bison / Büffel / Mamut, Biopower, AK 430, AK 235, AK 635 and others Manufactured according to your specifications: - Unlimited length - Width up to 1800 mm - 2, 3, or 4 material layers - Various profiles - Steel wire quantity: 10cm/ 35 +/-1 - in various material thicknesses Conveyor belts of the highest quality Fodsxmvplspfx Aa Ejfw