Used Bead Saw for sale (5,706)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Nwjdpfxsxnlgco Anfof

Year of construction: 1992, condition: good (used), Aluminum circular saw, chop saw, glazing bead saw, aluminum saw,machine -Manufacturer: Alfred E.Gohl, glass bead saw type GLS -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW -Speed: 3000 rpm Nedsif Azfjpfx Anfowf -Dimensions: 1100/650/H1350 mm -Weight: 152 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is almost new, following company liquidation. Nedjyl R Uhepfx Anfowf

Year of construction: 2018, condition: as good as new (ex-display), Glazing Bead Saw GLSM-200E Manual saw feeding Pneumatic work piece clamping (4) Adjustable table height Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 30mm HM Saw blades 103 x 2.0 x 30mm Z=60/45° Left HM Saw blades 103 x 2.1 x 30mm Z=60/45° right Variable measuring stick 1.5m Variable measuring stick 3.0m Nwjdpfx Ansuxxxefef Support for measuring stops 3.0m

Condition: used, Year of construction: 1997, machine/vehicle number: 971845, input voltage: 400 V, Machine in the condition shown in the photo, removed from production, operational. Nodpfx Aow Ixn Uonfjwf

Year of construction: 2022, condition: like new (used), Circular Saw OMRM 105 Nwsdpfow D Dq Usx Anfsf Technical Specifications: • Automatic cutting of PVC profiles for glazing beads at 45° • 4 cutting saw blades • Vertical pneumatic clamping system • Adjustment handle for easy mould adaptation • Double cutting of glazing bead at 45° in one single operation • Adjustable cutting speed via regulator on the control panel • Standard equipment includes feeding and measuring conveyors (2.5 m + 2.4 m)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 403 6274, overall weight: 297 kg, Dimensions: Machine width: approx. 700 mm Machine depth: approx. 1,350 mm Machine height: approx. 1,250 mm Weight: approx. 250 kg Cutting angle 45 degrees Tools used: Nsdpfx Aowhpp Ronfjwf All milling and cutting tools must meet the DIN EN 847-1 standard and have an appropriate working speed to the speed of the milling cutter motors. Milling cutter: Ø 150x30x3.0 32 teeth Cutting disc: Ø 300x30x2.6 96 teeth GLA 403 USER MANUAL Copyright  by FM ROTOX Sp. z o. o. Page: 14 Processed material: PVC glazing beads: Profile length: min. 200mm (depending on the length bumper) Profile height: min. 5mm max. 50mm Profile width: min. 10mm max. 50mm Tool pressure: Pneumatic Electrical part: Electrical connection: 400V, 50Hz (AC) Power consumption: 2.2kW Fuse: 16A (slow) Saw motors: 230/400V; 4.0/2.3A 1.1kW; 50Hz; 2860 1/min Pneumatics: Working pressure: 5-6 bar Limit pressure: min. 5 bar (also during operation) max. 6 bar Air consumption: approx. 15 l/min / saw run-up Tip: NW Ø 9mm Permitted temperature during operation: min. 15°C and max. 40°C

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic Nwodpfxowxmhls Anfof 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, cutting width (max.): 400 mm, saw blade diameter: 800 mm, rotational speed (max.): 800 rpm, total length: 13,500 mm, total width: 5,400 mm, total height: 2,500 mm, cutting length (max.): 6,000 mm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing. Nwedjw Nbhmjpfx Anfsf

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available Nwedob A N Alopfx Anfef -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor Njdpjb A N Akjfx Anfewf -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type negotiated Description Notes Nwsdpfob Rnv Sjx Anfef Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery Njdpsfv Hphefx Anfowf PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Nodsd H Hmhepfx Anfowf Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation Nwjdpju U Ad Rjfx Anfef 600kg/h 15g/liter electric power 22KW EPS bead storage 300 m3

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, Nodpfxotqt T Is Anfjwf - complete with hydrostation, - electrical cabinet.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Deflection pulley diameter: 630 mm Tool dimensions: 13 x 0.65 x 24 TPI Saw band length: 4,700 mm Loading height: 1,065 mm Cutting height: 350 mm Nedpfeyzy Drjx Anfewf Cutting width without rip fence: 610 mm Cutting width with fence: 150 mm Cutting speed: 10 - 100 m/min Table travel: 600 mm Table feed speed: 0.03 - 0.3 m/min MACHINE DETAILS Extraction connection diameter: 1 x 120 mm + 1 x 100 mm Required air velocity: minimum 25 m/s Required air volume flow: 1,725 m³/h Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,200 x 2,300 mm Machine weight: 550 kg Motor power: 0.75 kW Operating voltage: 400 Volt / 50 Hz Power supply: 3 x 400 Volt Fuse protection: maximum 16 Amperes Minimum cross-section: 1.5 mm²

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm MACHINE DETAILS Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Nwjdpfoyx Et Hex Anfjf Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Longitudinal fence with 90° locking completely replaced Machine electrically inspected Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting length (max.): 760 mm, cutting range round steel at 90°: 400 mm, saw band length: 5,920 mm, working height: 720 mm, No reserve price – guaranteed sale to the highest bidder! Nwedpfxjy Ex E Ns Anfjf TECHNICAL DETAILS Saw band dimensions: 5,920 x 41 x 1.3 mm Cutting speed: infinitely adjustable (1:7) Working range (round): max. 400 mm Working range (square): 400 x 370 mm Cut length (single stroke): 10 - 760 mm Cut length (multiple stroke): max. 9,999.9 mm Working height: 720 mm Clamping force: 3,600 N Min. finished part length: 10 mm (35 mm vertical) Note: Disassembly and loading can be offered by the seller at an additional cost. The roller conveyor is not included in the offer.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, controller model: E555 Touchscreen, overall weight: 2,300 kg, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Max. cutting length: 6000 mm Saw blade diameter: 550 mm Saw blade speed: 2800 rpm MACHINE DETAILS Control: E555 touchscreen Compressed air supply: 7 bar Dimensions & Weight Nwjdpfx Ansy Egahefjf Dimensions (L x W x H): 7500 x 1500 x 2000 mm Weight: 2,300 kg

Condition: used, Year of construction: 2018, Cursal TRSI 8000 AP Automatic Crosscut Saw With Integrated Pusher - 2018 CE Durable and versatile automatic crosscut saw with exceptional speed and accuracy. Impressive speed and accuracy CNC programmable sequential cutting capabilities Optional loading and unloading Specification : 6000 mm In feed capacity, push feed crosscut Saw Single-block structure: the frame made of welded - worked steel Pneumatic side-aligner installed before of the blade Nwodpfx Ansxxvqtofof Pneumatic blade-press with mobile casing: stroke 150 mm. Breaking press-wheels with horizontal axis installed after blade Cutting height on the guide: 120 mm. Width of the boards: min. 40 - max. 250 (300) mm Automatic cutting control managed by the computer Vertical alternated blade movement: pneumatic system with totally controlled stroke Saw blade HM steel with alternate teeth Ø 500 mm, hole Ø 35 mm - Z=120 Blade motor HP 7,5 with automatic brake Cutting time: adjustable from 0.3 to 2 seconds CNC unloading belt with 2 programmable ejectors 2018 CE

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min Nodjy D I Nnjpfx Anfowf SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW PLUS 2 SETS OF LOADING RACK

Condition: new, Year of construction: 2023, The Stromab RS900 radial arm crosscut saw (2023 CE) is a robust, precision machine for straight and angled cutting, featuring a heavy-duty build, smooth sliding arm, and reliable performance—offered in like-new condition and ready for immediate use. Ex College A1 Condition - Unused 350mm max saw diameter 890mm crosscut capacity 95mm max depth of cut 4hp motor Swivelling and canting facility with fixed locking at 45 degrees Nsdpfx Aney Ef Ausfswf Spring return for saw unit MDF table Year - 2023 CE

Condition: new, Year of construction: 2022, A mid range, industrial level sliding table panel saw for cutting sheet material or timber. Standard features include electric rise / fall / tilt of the saw group, table locking in any position and quick angle setting of the cross cut fence. Specification : Ex College A1 Condition - Unused Worktable dimensions 1000X560 mm Sliding table dimensions 3200X350 mm Max squaring capacity with scorer 3350 mm Cutting width max - blade to rip fence 1300 mm - manually adjusted - scale / pointer Tilting blade 0.45 degrees Max cutting height with blade at 90° d.350 mm 118 mm Max cutting height with blade at 45° (d.350 mm) 81 mm Max sawblade dia and bore size 350/30 mm Saw rotation speeds 3000/4600 RPM Dust extraction outlet on machine base d.100 mm Nwsdpfx Ansy Efz Rsfef Main sawblade motor 4kW (5.5HP) 50Hz Scoring motor 0.55kW (0.75HP) Max squaring with stops 3600 mm STANDARD EQUIPMENT: Carriage in anodised aluminium alloy sliding on high precision adjustable guides in hardened and ground steel Mitre gauge on sliding table 90° quick locking and single degree tilting scale plus reference at 10, 15, 22.5, 30 and, 45 degrees. Quick fence positioning at 90° 10° 15° 22.5° 30° 45° keeping without change the stop position in reference to the blade position. Anodised aluminium profiles Table locking in any position Main saw blade speed change accessed through the table Sliding table with push handle Eccentric workpiece clamp Motorised blade rise / fall Motorised sawblade tilting with electronic read out Electrical safety micro switches on access door Overload switch protection Key locking master witch Emergency stop Electromagnetic main motor brake CE compliant overhead saw guard with extraction point Outfeed side extension table Complete with set of sawblades - 350dx30x3.2 Z60 and 120dx20x3.5 Z24

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Nsdpfx Aoyzf E Usnfswf Length of cut: 3100mm Width of Cut Vertical: 2070mm Width of Cut Horizontal: 1958mm Depth of Cut: 60mm Motor Power: 5.3HP Saw Blade Dia: 250mm Saw Blade Bore: 30mm 400V 50Hz