Used Beam Saw for sale (3,647)

Year of construction: 2022, Condition: new, Exhibition machine Year of construction 2022 Equipment and technical data: cutting length 3100 mm Air-cooled machine table Design stop side left Modular design of the basic machine for perfect adaptation to your space and cutting requirements Sawing cycle away from the fence, great time saving with more than 25 % more cycle speed Air-cooled machine table plates Width stop Positioning speed before 25 m/min according to CE (extension direction) Width stop return 60 m/min (feed direction) Steel pressure beam fixes the panels in the desired position. The pressure beam is stable and torsion-free Infinitely adjustable pressure force Residual cutting device in the pressure beam Width stop cutting width 3100 mm Welded steel construction - absolutely stable and torsion-free guided on a linear guide. Positioning via direct drive on rack and pinion drive on both sides rack and pinion drive (king shaft) Measurements are taken without contact via a magnetic tape system the opening dimension of the collets is max. 70 mm Sliding door on the right (standard without surcharge) A double sliding door provides access to the rear of the machine. The sliding door moves on precise linear guides. There is space for up to 6 Euro pallets in the rear machine area under the roller conveyors. The perfect access for maintenance and cleaning work in the rear area of the pressure beam saw Angled air cushion table and fence 1800 mm Table size 1800 x 600 mm, permanently mounted. For protecting the panel surface and easy handling when moving and turning the materials 2 support air cushion tables 1800 x 600 mm 3 loading rollers at the front Saw carriage with steel-reinforced toothed belt drive, guided on surface-hardened linear guides The unique smooth running of the saw carriage is achieved by the double-sided suspension. The light sensor mounted on the unit has two impressive features: firstly, it detects the end of the flap and optimizes the travel paths, and secondly, it measures the panel length and transmits this measurement to the width stop; this creates advantages for automatic trimming and series cuts Main saw motor 7.5 kW Saw projection max. 68 mm Saw carriage feed speed from 0 - 60 m/min electronically controlled, infinitely variable via the control panel Return speed 70 m/min - very short idle times Dqrwmb 2.2 kW scoring motor Automatic cutting length limiter with blow-off device for cleaning the cutting length sensor Single Press pneumatic, program-controlled angle pressing device infinitely variable up to 1200 mm Workpiece clamps - floating suspension fully equipped with 7 pieces Visible Cut Line - the exact cutting line is displayed here with a laser beam CUTCONTROL 2 central control unit Multitouch 21.5" full HD screen 16:9 format Wireless keyboard and mouse Control panel & multi-touch screen can be swiveled ECO-MODE time-controlled switch-off of the drive and control components for energy saving incl. evaluation of energy efficiency Manual control unit for remote control and easy operation of the machine Label printer and software for

Condition: excellent (used), Pressure beam saw HOLZHER CUT 6110 -used- PC control with optimization, scoring unit, angle cutting device, automatic cutting length detection, side pressure device, air cushion tables, stepless feed of the saw carriage, 2-stage grooving device, cut-out device ----- Technical data ----- Cutting length: 3900 mm, cutting width: 3100 mm, max. cutting height: 70 mm, Number of clamps: 6 pieces, Max. feed width stop: 25/100 m/min, Motor power main saw: 11 kW, Bsmdp0Pib3Q Motor power scoring unit: 1.1 kW, Saw blade main saw Ø: 350 mm, Saw blade scoring saw Ø: 180 mm, Suction nozzle Ø bottom: 120 mm, Extraction nozzle Ø on pressure beam: 3x120 mm, Volume flow: 3500 m³/h, Compressed air connection: 8 bar, Air requirement: 65 l/min, Nominal current: 31.4 A, max back-up fuse: 35 A Quality info: - Saw shaft with new bearings - New scorer bearings - New belts - Complete basic inspection - Complete basic cleaning - electrics checked - ready for immediate use

Condition: used, machine/vehicle number: 007486, Max. panel width: 2100 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm Dpjd8V

Condition: like new (used), Year of construction: 2013, -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly Bgkegtds -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Year of construction: 2004, Condition: like new (used), I sell the panel beam saw HOLZ-HER CUT85. Year 2004. Cutting size 3200x3200mm. Cutting height 85mm. Max saw blade diameters 350 + 180mm Main motor 11kW Scoring motor 2,2kW Total power 15kW Total area covered W.5636mm x D.6520mm 6 pcs. gripper with pneumatic regulation Iqmyn0Dgxr Side alignment top roller with pneumatic stroke. Optimising software included. Label printing included. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: CH 03/32/32 PLUS, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 50 mm, cutting height (max.): 50 mm, cutting width (max.): 3,200 mm, total length: 6,500 mm, total height: 1,950 mm, total width: 5,100 mm, Homag Optimat CH03 Plus Cuts 3200mm x 3200mm x 50mm Thick Foot print approx 5.1m Wide, 6.5m Deep, 2m High. Being the ‘Plus’ model it has the grippers/clamps to take in sheets for cutting unlike other models of same age. 3 x front air floatation tables Comes with all guards etc Very neat and tidy machine, always got what it needed. We are the second owner from new. Previously used for cutting corrugated plastic for signage company. Has had an easy life. Only cutting chipboard since 2022. A lot of money recently spent to ensure accuracy of cutting square. All is now perfect, comes with spare blades and ready to work. Machine was still in everyday use up until May 2024, with no issues. Cg8Ftehrh0 Change of circumstances forces sale. Original Engineer decommissioned machine, and is available to recommission machine anywhere in Ireland if required Asking price: € 6,950 + VAT Open to reasonable offers for quick sale due to storage

Year of construction: 1994, Condition: used, Pressure beam for Martin sliding table saw T 72 A year of construction 1994 suitable for pneumatic clamping of veneers or thin boards for 3 m sliding carriage Availability: short term Cq2Rvoykhu Storage location: Flörsheim

Condition: good (used), Functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 3,200 mm, SCM Sigma 65 Beam Saw. 3,2m x 3.2m. Main Saw & Scoring Saw. 2 Front Air Cushion Tables. Without a cross cut fence. Ideal for strip cutting waney edged boards for engineered wood flooring panels. Ca2Nf9Uv3S Photos available on WhatsApp. Price: Ex.works, Burrowbridge, Somerset.

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Control (CADmatic 4.1 - Professional) Bezyalt0H9 Lifting scissor table (mm) 4300 x 2200 Rear pushers (N.) 1 With clamps / grippers (No.) 7 Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 6750 Max blade projection (mm) 110 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 420 / Kw 18 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (No.) 3 + 1 long Total power (Kw) 28 OPTIONAL: No. 1 Printer for labels Optimizing Software Schnitt Profi(t) Practive

Year of construction: 2010, Condition: like new (used), I sell the panel beam saw SCM Sigma Prima 67. Year 2010. Cutting size 3300x3200mm. Cutting height 67mm. Max saw blade diameters 320 + 160mm Main motor 7,5kW Scoring motor 1,3kW Total power 10kW Mzc7Gxfv Total area covered W.5400mm x D.7000mm 8 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Label printing included. Software Ottimo Perfect Cut included. Very good condition. Available immediately.

Year of construction: 2011, Condition: used, Used machine Year of construction: 2011 4572 operating hours Machine will be completely overhauled Equipment and technical data: Bpzlamlj Cutting length: 4400 mm Cutting width: 4300 mm Collets: 5 pcs. Double finger collets: 2 pcs. Machine table completely air-set incl. postforming unit Feed: infinitely variable up to max. 100 m/min. Saw blade projection: 82 mm Saw blade diameter max.: 350 mm Main motor: 11 kW Scoring unit adjustment: motorized Incl. grooving device Incl. label printer Incl. cutting optimization Incl. angle press device controlled Incl. 1 pcs. Angled support table 2400 mm air-guided Incl. 3 pcs. support table 1800 mm air-pressed incl. 4 ball-bearing mounted castors on the side incl. 3 lateral rollers with ball bearings Incl. cut-out device incl. manual control unit incl. central lubrication incl. angle cutting device Weight approx. 6500 kg Location: Flörsheim Availability: by arrangement

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Yvk3Cc Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Year of construction: 2005, Condition: not inspected (used), I sell the panel beam saw GIBEN ONIX SPT CHALLENGE LINE Cutting size 3800x5400mm. Back loading table 3800x1600mm. Cutting height 90mm (at 350mm saw blade). 105mm (at 380mm saw blade) Main motor 13,3kW + scoring 1,1kW Total area covered W.6000mm x D.11000mm Year 2005. Bwiugnlfbl Pneumatic saw blade quick change. 5 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Back lifting table with automatic loading. Available immediately.

Year of construction: 2017, Condition: used, Used machine Year of construction: 2017 Equipment: Ullx7Uhp3B GRUNDMASCHINE Tectra 6120 CLASSIC cutting length 3100 mm - Width stop cutting width 31000 mm, for SL 3100, welded steel construction - absolutely stable and torsion-free - Angled air cushion table and fence 1800, table size 1800 mm x 600 mm, permanently mounted - 2 support air cushion tables 1800, table size 1800 mm x 600 mm, permanently mounted - Feeding roller at the front (1 piece per table), prevents damage to the panels when loading and unloading - 5 workpiece clamps - floating design via a linear guide, the workpiece clamps can compensate for unevenness in the panels/packages - no pressure points on rollers - CUTCONTROL 2 control unit, 21.5"" TFT display" - Saw carriage standard 7.5 KW, 400 V 50/60 Hz - 4400 mm - EASY-PLAN - Dongle version, especially for quick and easy optimization of parts lists - OPTI-CUT software is based on office optimization - OPTI-BASE optimization software for the office - 1 x office license - dongle version (USB hardlock) - Pneumatically controlled angle pressing device - infinitely variable up to 1200 mm - Program-controlled, path-optimized angle pressing device - infinitely variable up to 1200 mm - Automatic central lubrication, no maintenance required for lubricating the machine - EasyLabel - label printer for HOLZ-HER machines, label printer for direct connection to machine computer - Manual control unit for remote control of the machine for easier operation of the machine - Control panel cpl. standard monitor for Classic The vacuum lifting device shown in the picture is not included in the scope of delivery! Availability: short term Storage location: Flörsheim

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 8 clamps / grippers Max. cutting width (mm) 3250 Useful stroke of the pushing system (mm) 3300 Max. blade projection (mm) 95 Max clamps opening (mm) 90 Scoring Unit (max. diameter saw) mm 300 Main Sawing Unit (max. diameter saw / power) mm 350 - Kw 15 Jtxd28Gy Adjustable speed of the saw carriage (m/min) 5 - 120 No. 3 Front supporting tables with Air blowing system Total power (Kw) 21

Condition: like new (used), Year of construction: 2010, I sell the panel beam saw HOLZ-HER CUT82 6110. Cutting size 3900x3100mm. Cutting height 82mm. Max saw blade diameters 350 + 180mm Main motor 11kW Scoring motor 2,2kW Total power 15kW Total area covered W.5636mm x D.6520mm 7 pcs. gripper with pneumatic regulation L307Z7T7I Side alignment top roller with pneumatic stroke. Optimising software included. Label printing included. Very good condition. Available immediately.

Year of construction: 2016, Condition: used, Used machine Year of manufacture: 2016 Cutting length 3200 mm Features: - Swiveling saw unit - Pressure bar for 90° to 45° saw cuts - Angle stop extendable up to 2,500 mm with a stop stop, mounted on a fixed extension table 1,000 x 510 mm - 2 parallel motor-driven width stops for dimension adjustment up to 1,300 mm, mounted on a fixed extension table 1,000 x 400 mm - Automatic stop swiveling for extremely small space requirements - Additional motor-driven width stop, which moves synchronously with the standard width stop. Moves up to 650 mm and then swivels away Incl. Support table, which can be used variably on the back - Mobile support table 800 x 200 mm, front and back, can be hung up - Pre-scoring system using the main saw blade in synchronous motion - the setting is made manually, the scoring depth is read out Dqlywl via a mechanical display - Automatic workpiece length detection for minimal travel distances - All table surfaces are made of phenolic resin - The programming unit is located on a mobile desk. Max. cutting depth: 105 mm at 90° // 72 mm at 45° Saw blade: diameter 300 - 350 mm, bore 30 mm Saw blade rotation: 4,000 rpm. Motor: 5 kW (= 7.5 HP) Feed speed: 0 - 40 m/min. Cutting line laser 2 digital displays for extendable telescopic stop for setting a total of 3 folding stops Total length: 4270 mm Weight: 1,300 kg Required air pressure: 6 bar Extraction nozzle: 1 x 100 mm, 1 x 120 mm Availability: short term Storage location: Hochheim

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 8 clamps / grippers Bsklstv7He Max. cutting width (mm) 3250 Useful stroke of the pushing system (mm) 3300 Max. blade projection (mm) 95 Max clamps opening (mm) 90 Scoring Unit (max. diameter saw) mm 300 Main Sawing Unit (max. diameter saw / power) mm 350 - Kw 15 Adjustable speed of the saw carriage (m/min) 5 - 120 No. 3 Front supporting tables with Air blowing system Total power (Kw) 21

Year of construction: 2016, Condition: excellent (used), I sell the panel beam saw HOLZMA HPP200/38/38. Year 2016. Cutting size 3800x3800mm. Djs8Wn Cutting height 60mm. Max saw blade diameters 350 + 200mm Main motor 7,5kW Scoring motor 1,1kW Total power 12kW Total area covered W.5867mm x D.6637mm 6 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. Cadmatic 4 optimising software included. Label printing included. Very good condition. Available immediately.

Year of construction: 1995, Condition: used, Used machine E8Pb0X7 Year of construction 1995 cutting length 3800 mm Cutting width 4050 mm Saw blade projection 105 mm Cutting height approx. 90 mm Main saw blade diameter 400 mm Bore diameter 75 mm motor 9 kW Scoring saw blade diameter 160 mm Bore 45 mm motor 1,1 kW Saw carriage 5-60 m/min Feed pusher 0.4/20 m/min Pusher return 20 m/min Compressed air 5-6 bar Consumption 20-30 l/min Weight 4700 kg Machine only suitable for rough cutting Price is valid for takeover ex site at the time of dismantling Availability: short term Location: Röllbach

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Bhicvcjg Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.)

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 8 clamps / grippers Xtoljmm2 Max. cutting width (mm) 4250 Useful stroke of the pushing system (mm) 4300 Max. blade projection (mm) 95 Max clamps opening (mm) 90 Scoring Unit (max. diameter saw) mm 300 Main Sawing Unit (max. diameter saw / power) mm 350 - Kw 15 Adjustable speed of the saw carriage (m/min) 5 - 120 No. 3 Front supporting tables with Air blowing system Total power (Kw) 21

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Bh2W0Mtwwv Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 7 clamps / grippers Max. cutting width (mm) 4300 Bsszhmpx Useful stroke of the pushing system (mm) _____ Max. blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 360 - Kw 18 Adjustable speed of the saw carriage (m/min) 0 - 160 No. 3 Front supporting tables with Air blowing system Total power (Kw) 35

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 8 clamps / grippers Max. cutting width (mm) 3250 Useful stroke of the pushing system (mm) 3300 Max. blade projection (mm) 95 Max clamps opening (mm) 90 Scoring Unit (max. diameter saw) mm 300 Bjm20Xqtqf0 Main Sawing Unit (max. diameter saw / power) mm 350 - Kw 15 Adjustable speed of the saw carriage (m/min) 5 - 120 No. 3 Front supporting tables with Air blowing system Total power (Kw) 21