Used Beading for sale (244)

Condition: used, Used Fryma model MS-12 stainless steel coball annular gap bead mill. Grinding chamber volume approximately 0.5 litre capacity with throughput capacity of 5-40 litre per hour (depening on product). Internal ratwed 2.5 bar design pressure. Has external stainless steel jacket rated 2 bar design pressure. Unit driven by 3.37kw electical motor. Unit includes pump. Itjdpfx Ajygvmxsbvsd

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Iedpfx Asxnlgcjbvstd

Condition: new, Year of construction: 2026, - Capacity 1.2 mm - Extension 250 mm - With 8 sets of rollers Itedpegg Nrkefx Abved

Condition: new, Rollmak motorized beading machine BM 250 Including 3 tool sets Technical specifications Tool diameter Ø95 Shaft length: 260mm Bending capacity: 2.5mm Rotation: 11 m/ min. Motor: 1.1 kW Dimension L-W-H: 1550x550x1200mm Weight: 295 kg Itsdpfx Abeum Tzxjvod CE mark

Condition: new, Rollmak motorized beading machine BM 125 Iodpfx Aoum T Daobvetd Including 9 tool sets Technical specifications Tool diameter Ø62 Shaft length: 131mm Bending capacity: 1.25mm Rotation: 6.3 m/ min. Motor: 0.75 kW Dimension L-W-H: 970x450x1350mm Weight: 130 kg CE mark

Condition: good (used), Dynomill Multilab Bead mill Itodpfx Abjrwz Rajvsd 2006, 3.3Kw, tabletop bead mill, ideal for wet ultrafine grinding and dispersion, 3Ph

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Itsdpfx Abevk D Tdevod Sheet thickness max. 1.75 mm.

Condition: excellent (used), Bead mill Molteni MS.15 Ex-protected version grinding container 15 l additional grinding tank double jacket Itsdpfx Absiu H Ucovod power 17,5 kW Very good ready to use condition, directly from production!!!

Condition: excellent (used), Bead mill Drais PM 1 RL-V Ex-protected version grinding tank 1,3 l power agitator 2,5 kW with feed pump Revision in 2005 Isdpok D Ac Eefx Abvjtd Very good condition, directly from production!!!

Condition: excellent (used), Bead mill COMEC M 8 Stainless steel Ijdpfx Aoh Rakhobvstd Double jacket Container capacity 8 l Very good working condition, directly from production!!!

Condition: excellent (used), Bead mill Vollrath VMSM 2/8 B Itodpfxoh Svr Sj Abvsd Ex-protected version double chamber grinding bowl 2 x 8 l double jacket Power 18,5 kW Very good ready to use condition, directly from production!!!

Condition: excellent (used), Bead mill Drais PM 25 RL-V Ex-protected version grinding tank 26 l power agitator 24 kW with feed pump Itedek D Agtspfx Abvsd Very good condition, directly from production!!!

Year of construction: 1992, condition: good (used), Aluminum circular saw, chop saw, glazing bead saw, aluminum saw,machine -Manufacturer: Alfred E.Gohl, glass bead saw type GLS -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW -Speed: 3000 rpm -Dimensions: 1100/650/H1350 mm -Weight: 152 kg Isdpfeif Azfox Abvetd

Condition: good (used), beading machine, hand beading machine, flanging machine, seam closing machine, manual beading machine -max. sheet capacity: 1.0 mm -Projection: 200 mm Ijdpocmtntjfx Abvjtd -Tool holder: Ø 24 mm -Stop plate: adjustable -Dimensions: 750/700/H1500 mm -Weight: 120 kg

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Itodpjv Dwirefx Abvjd

Year of construction: 2015, condition: ready for operation (used), A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Isdpfsxvrt Sjx Abvotd

Year of construction: 1995, condition: ready for operation (used), A high-performance Drais bead mill for the chemical-cosmetic industry is available. Flour chamber volume: 15l, operating temperature: 98°C, speed: 1470rpm, flow rate: 2500l/h, power: 45kW. On-site inspection is possible. Itodovnucdopfx Abved

Condition: ready for operation (used), A horizontal ball mill from the Ruitong Group is available. Volume: 30l, material: steel, motor power: 22kW, electrics: Delixi, max. operating temperature: 45°C, shaft speed: 780rpm, dispersion discs: 11, throughput range: 50kg-600kg/h, max. product viscosity: 100Pas. Machine dimensions X/Y/Z: approx. 2000mm/950mm/1600mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. The mill is located in China Isdpfx Ajx R Dt Ajbvjtd

Condition: used, This listing is for Illumina Array BeadXpress DNA Bead Array Reader Illumina’s new BeadArray Reader simultaneously scans Sentrix Arrays at two different wavelengths with a resolution of less than one micron. A scan of 96 hybridized samples in an Array Matrix, representing data acquisition from over 4.5 million discrete beads, takes less than 90 minutes. This represents the highest throughput of any scanning platform used for microarray-based genetic analysis applications. The BeadArray Reader offers broad dynamic range, high sensitivity, and a low limit of detection. These metrics are particularly important for users planning to study gene expression and other applications that are supported by BeadArray technology and that demand high scanner performance. Can be refurbished on request, refurbishment not included in price. Itjdpoxzh Ayefx Abvod

Year of construction: 2002, condition: used, Manufacturer : Comec Model: Micronet-25-COSM Year : 2002 Type : DISPERSION & MILLING MACHINE   Useful volume : 3 - 22 L Motor power : 4 kW Material : stainless steel Electrical cabinet with variable speed drive. Work cycle timer for automatic stop. Double jacket Top loading of liquids Dispersion by deflocculating turbine + sand milling Continuous recirculation between the upper dispersion basket and the lower grinding chamber until the desired fineness is achieved. Isdpox R Dgpefx Abvjtd Cosmetic applications: Particularly suitable for the stable dispersion of oils in water, the addition of pigments and glues, and the mixing of colourants in products such as nail varnishes.

Year of construction: 1990, condition: used, Manufacturer : Fryma Model: MSM-18 Year: 1990   Type : Ball mill type Co-Ball Application: fine grinding of suspensions and highly viscous products. Grinding chamber volume: 1.1 litres Internal overpressure: 2.5 bars Jacketed: 2 bars Motor power: 5.5 kW   Itedpfx Aox R Dd Iobved Capacity: 20 – 80 l/h depending on product.   Examples: food: chocolate coatings / fillings cosmetics: lipsticks, pigment pastes pharmaceutiques : additifs chimiques : laquage pour les pigments, les peintures et les céramiques.  

Year of construction: 1998, condition: used, Manufacturer : Buhler Itodpfx Ajx R A Daobvjd Machine model: K60 Number: SRB 220 Year: 1998 Type: Bead mill / grinder with conical slot agitator.   Dynamic pressure compensation in the mixer Cooling system for stator, rotor and separation ring. Grinding chamber volume: 4.8 dm3 / 4.8 liters Grinding chamber filling volume: 6.4 dm3 / 6.4 Litres Pressure system swept volume: 2.5 dm3 / 2.5 Litres Power rating: 30 kW Variable speed drive   Sold with progressive cavity pump PCM 2.6L10 Documentation available Product example : paints, pastes, …  

Year of construction: 2007, operating hours: 9,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 56127, Glazing bead cutting for PVC window frames, with simultaneous pair cutting, including right-side metric stop. Iedpfx Abjyq Rkmevetd

Condition: good (used), Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Protrusion: 50 mm -Dimensions: 900/800/H1100 mm -Weight: 250 kg Ijdeb A Ncrepfx Abvjtd

Condition: excellent (used), functionality: fully functional, Voltage 380 v Absorption 3.5 kW Pressure 6-8 bar Blade motors 2800 g7min. 0.75 kW Blade diameter: 250+175 mm Max profile height 40 mm Minimum profile width 100 mm Minimum profile length 350 mm Weight 150 kg Dimensions: 1300x550x1250 (h) mm Ijdpfxjv S I Are Abvotd