Used Belle Minimix 150 for sale (9,686)

Condition: used, mileage: 10 km, power: 110 kW (149.56 HP), first registration: 06/2026, fuel type: diesel, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Your direct contact: Andreas Kawa, Head of Sales, Commercial Vehicles – Phone: | Email: Special equipment: Godpfxjznri Dj Aqiebr Trailer coupling, removable without tools Reinforced LED cargo area lighting (5W + 10W) Cargo area floor protection made of wood (9mm, non-slip) CONNECT PACK LED headlights, LED daytime running lights WINTER PACK Partition wall, glazed and insulated Double passenger seat incl. Moduwork COMFORT PACK Additional equipment: Airbag driver/passenger side, audio controls on the steering wheel, RCC DAB audio system (radio/CD player, MP3 compatible), double passenger seat, on-board computer, parking assistance system (rear), driver assistance system: emergency call and assistance system (CITROEN Connect), rear hinged doors without glazing, body/superstructure: van, steering column (steering wheel) mechanically adjustable in height/length, headlight range adjustment, engine 2.0 L - 106 kW Blue-HDI FAP, safety package, low emissions according to Euro 6d emission standard, halogen headlights, sliding door on the right side without window, SCR system (AdBlue technology), front left seat adjustable in height, seat cover/upholstery: fabric Curitiba, stop-start system Errors, changes, and interim sales: The information regarding the equipment provided in this advertisement does not constitute a guaranteed characteristic in the legal sense and serves solely for general information purposes. Binding equipment features are exclusively subject to the purchase contract. SAMPLE PHOTOS

Condition: used, Year of construction: 2013, Year of manufacture: 2013 Godpfxozrglzs Aqiobr 240 V, IP 65 Operating pressure: 6-8 bar

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) Gbsdezimcbjpfx Aqior (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support Gbjdpfx Ajg Dvdcoqisr - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck Gbsdsx Ebzqepfx Aqior - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: excellent (used), Zwick / Roell Zwick Indentec Hardness Tester Gedpfxszh D Raj Aqiebr Type: 4150DLC-A Technical Specifications: Available test forces: 60, 100, and 150 kgf Power supply: 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/PE + EO-4010C camera and ueye software Condition: used Weight: approx. 60 kg Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s Godpfx Aqofxygwjiebr servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: good (used), Grinding drum, deflection drum, belt grinder, belt sander, drum grinder, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 150 mm Gbodpfxsvxgwus Aqier -Drum: Ø 250 mm -Hole: Ø 40 mm -Quantity: 1x drum available -Dimensions: Ø 250 x 150 mm -Weight: 15.4 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Gbjdpfxovxp Uvj Aqijr -Manufacturer: KED Kurt Ehemann, grinding drum drum width 640 mm -Drum: Ø 150 mm -Hole: Ø 72 mm -Quantity: 1x drum available -Dimensions:Ø 150 x 640 mm -Weight: 16.4 kg

Condition: good (used), clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 55 x 15 mm -Dimensions: 200/150/H150 mm -Weight: 9.9 kg Gbodpfevx Nlhjx Aqier

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder, compensating cylinder Gedpfx Asv N Eapsqisbr -Hydraulic cylinder: tie rod cylinder stroke 150 mm -Type: DZL 50N28/ 150 SFSFF 40 .: 153/10948 97008023/03 -Piston rod: Ø 28 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 324/116/H105 mm / 335/120/H110 mm -Weight: 5.8 kg/piece

Condition: used, Gearbox, bevel gear, worm gear Gbodpfxot Snwxe Aqior -Gearbox: Ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm -Dimensions: 150/145/H175 mm -Weight: 5.1 kg

Condition: good (used), Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, lever shears, sheet metal and round steel shears -Steel sheet: up to 7 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -Lift-down device: Gedpsibriijfx Aqisbr -Overall dimensions: 480/210/H1360 mm -Transport dimensions: 1070/210/H470 mm -Weight: 41 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Cebeha, gear motor type CB SF 150-63 N/40 -Speed: 23 rpm -Engine: 0.18 kW / 1360 rpm -Hollow shaft: Ø 20 x 85 mm -Protection class: IP54 -Total dimensions: 260/250/170 mm Gbjdet E D Elopfx Aqijr -Weight: 12.5 kg

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm -Wingspan: 200 mm -Number: 2x vices available Gbjdpsddfh Ejfx Aqijr -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 300 mm -Depth: 150 mm -Edge: 17 mm -Drain: Ø 52 mm Godpfx Aqob Uhm Noiebr -Number: 7x available -Price: per piece -Dimensions: 340/H150 mm -Weight: 2.1 kg

Condition: good (used), Roller conveyor, roller track, roller track -Roller width: 595 mm Godpfsdwa Dksx Aqiobr -Conveyor length: 1500 mm -Roller diameter: 20 mm -Roller conveyor height: 280 mm -Dimensions: 1500/760/H280 mm -Weight: 44.5 kg

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: approx. Ø 80 mm -Piston rod: Ø 50 mm -Piston rod mounting: 2x Ø 35 mm Gbjdpfxsd Etd So Aqier -Stroke: 150 mm -Dimensions: 780/205/H135 mm -Weight: 33.6 kg

Condition: good (used), Year of construction: 1985, radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa Gbedpscii N Ssfx Aqior -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic reservoir -Hydraulic pump: pressure up to 150 bar, unfortunately without type designation -Flow rate: 12 l/min -Motor: VEM 4.0 kW / 1430 rpm -Hydraulic tank: -Individual components: see photos -Dimensions: 500/480/H700 mm Gbsdpfjpg N Slsx Aqior -Weight: 106 kg

Condition: used, Hydraulic Press, Oil Hydraulic Press, Pressing Machine -Manufacturer: Novopress, Hydraulic unit for press machine Gbsdpsh N Tibefx Aqisr -Pressure: max. 150 bar -Type: unfortunately no type designation -Accessories: see photos -Total dimensions: 410/310/H440 mm -Weight: 19.1 kg

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Gedpfx Aev Ac Tysqisbr -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/50/H130 mm -Weight: 4.1 kg

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection Gbodpfx Ajxrnpbjqier -Belt conveyor: Vacuum part area for the suction of the material to be conveyed -Belt width: 150 mm -Conveyor length: 635 mm -Drive shaft: Ø 30 x 150 mm -Dimensions: see photos / technical drawing -Dimensions: 530/400/H350 mm -Weight: 43 kg

Condition: excellent (used), Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system Gedpfx Asw Udtcoqiobr -Manufacturer: Messer, cutting nozzle flame cutting nozzle 40 pieces Ovp -Type: Vadura 1215-A / A-SD 100-150mm / 2-100mm / 2-150mm -Type/Quantity: see photos / parts list -Cutting range: 2-150 mm -Price/Delivery: complete -Transport dimensions: 250/230/H50 mm -Weight: 0.9 kg

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: ABB ASEA, double hydraulic unit -Hydraulic pump 1: Motor ABB 3 kW 150 bar Gsdpfxjwxr N Ie Aqiobr -Flow rate: 15 l/min, with pressure switch, pressure accumulator and filter -Hydraulic pump 2: ASEA motor 0.37 kw / 100 bar / 0.8 l/min -Hydraulic tank: with temperature/level indicator -Individual components: see photos -Dimensions: 785/570/H785 mm -Weight: 203 kg