Used Bench Seats for sale (14,666)

Condition: used, bore capacity in steel (diameter) 6.0 / 10.0 mm throat 200 mm bore stroke 60.0 mm spindle taper B 12 table: 280 x 260 mm turning speeds 430 - 9000 U/min column diameter 70.0 mm Iodpexaa Ryjfx Ag Nsih total power requirement 0.45 / 0.60 kW weight 95.0 kg range L-W-H 450 x 300 x 880 mm from a vocational training center (!!) Furnishing: - manual spindle feed - Analogue drilling depth display with mm scale - pole-changing motor - Work table with 2x T-slots height adjustable - machined base plate with 2x T-slots - Taper mandrel including keyless drill chuck - V-belt drive - ON/OFF switch, front - Connection cable + 16A plug - original instruction manual * Machine link: ?machineno=1008-9093645

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, number of seats: 24, gearing type: automatic, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, parking heater,

Condition: used, Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, table load: 5,000 kg, spindle diameter: 110 mm, total height: 3,800 mm, total length: 5,000 mm, total width: 3,000 mm, table length: 1,520 mm, table width: 1,225 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 2,000 mm, Tool holder SK50, Heidenhain control, machine is ready for collection and immediately operational. Iijdpexga Tnjfx Ag Neh

Condition: used, mileage: 257,000 km, Year of construction: 2018, Field of application: Freight transport Serial number: WDB9066571P57xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21296 Specifications: Km: 257,000 Transmission: Automatic Euro 6, 190 hp 4x2 Tow hitch 21 seats, can also be registered as 17 Approved for 3 wheelchairs, but ramp not included 2 sets of wheels with tires Tires (see pictures) Rearview camera Spare tire Radio/CD Climate control/AC Serviced at local workshop Delivery within a short time Description:Mercedes Sprinter 519CDI Minibus.The bus is from 2018 and has driven 257,000 km.It is recently EU-approved.Registered as 21-seater, but can be changed to 17 seats.Approved for 3 wheelchairs. Km: 257000 HK: 190 Technical approved: Yes EU-approved until: 09.09.2026 Own weight: 3800 Total Weight: 5300 Payload: 1425 Width: 199,3 Length: 736,1 Isdpfx Agsxb N H Ts Noih Euro: 6 Model: 519 CDI Gearbox: Automatic Number of seats: 21

Condition: used, Double Bench Grinder GREIF Type D 17 Serial No. 05105 Grinding wheel diameter: 175 mm Grinding wheel width: 25 mm Iijdpfsxciu Tsx Ag Njh Motor power: 0.35 kW Grinding wheel speed: 2800 rpm Power supply: 380 Volt, 50 Hz - Grinding spindle newly fitted with bearings - Original pedestal Required space (L x W x H): 500 x 450 x 1120 mm Weight: approx. 100 kg Good condition

Condition: good (used), Drilling capacity: up to 10 mm Spindle mount: drill chuck Speed range: Diameter pulleys Motor side: Spindle side: 38; 48; 66; 78 mm Isdpfxoh Hrkij Ag Njih 90; 104; 120; 133 mm Motor speed: 800 rpm stroke: 100 mm throat: 300 mm table: 400 x 400 mm distance table - drill chuck max: 580 mm distance table - drill chuck min: 130 mm table: 400 x 400 mm footprint: 750 x 480 mm total power: 0,4 kW accessories/equipment: drill chuck Condition: good weight: 170 kg dimensions: 750 x 480 x 1.450 mm

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 255 mm bore stroke 120 mm morse taper 3 MK turning speeds 105 - 2900 U/min table: 395 x 420 mm column diameter 100 mm threading max. M10 voltage 400 / 50 Hz V weight 140 kg range L-W-H 500 x 570 x 1100 mm Iiodpfxexaa Daj Ag Neh Furnishing : - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Condition: good (used), mileage: 21,404 km, power: 130 kW (176.75 HP), first registration: 07/2019, fuel type: diesel, color: orange, fuel: diesel, wheelbase: 2,800 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, differential lock, onboard computer, parking heater, soot filter, traction control, trailer coupling, - Airbags - Rear work lights - Front work lights - Armrest - Audio controls on steering wheel - AUX input - Outside temperature display - Construction site beacon - Device holder - Hill start assist - Leaf spring suspension - Differential lock - Differential lock Iodpfx Ajxcgukog Noih - Tachometer - EBS (Electronic Braking System) - Electric window lifts - ESP (Electronic Stability Program) - Additional lights - Driver airbag - Driver seat height adjustment - Speed limiter - Tinted glass - Hydraulic system - Tipping hydraulics - Folding exterior mirrors - LED lighting - Center armrest - Multifunction steering wheel - Fog lights - Particle filter - Radio/CD - Rotating beacon - Reversing camera - Full service history - Disc brakes - Power steering - Sun visor - Stability control - Auxiliary heater - Immobilizer - Tachograph - USB port - Automatic heating - PTO (Power Take-Off) - PTO (Power Take-Off) - Central locking - Towing jaw Very well-maintained Mercedes-Benz Unimog U 218 tipper, 3-seater, 4x4, with only 21,404 km on the odometer and a wide range of options. This Unimog is in good technical and visual condition. For more photos or information, please contact us by email, telephone, or WhatsApp at or . Dimensions L 515 W 250 H 325 FRONT AXLE DIFFERENTIAL LOCK AXLE RATIO I = 6.527 TRAILER BRAKE, 2-LINE SIDE UNDER-RUN PROTECTION REAR MOUNTING BRACKETS MOUNTING PARTS FOR SALT SPREADER ON LOADING PLATFORM FRONT MOUNTING PLATE DIN 76060, TYPE B, SIZE 3 ACTIVATED CARBON FILTER PASSENGER SEAT, DOUBLE SEAT AIR-SUSPENDED DRIVER'S SEAT WITH SEAT HEATING ADDITIONAL LEFT COLUMN SWITCH UNIVERSAL MOUNT, FRONT CONTROL PANEL BATTERY MAIN SWITCH AT BATTERY BOX 24V ABS TRAILER CONNECTION, 7-pin/5-pin 12V trailer socket, 13-pin 24V front socket, 7-pin 12V permanent power socket (C3), 12V and 24V center console 24V / 25A cab socket with C3 signal Reversing camera Additional removable camera for attachments 28V / 150A alternator Camera system monitor Exterior sun visor, transparent Windscreen, transparent, heated Resistor group with working group Automatic transmission (EAS) Transmission protection plate Tipping cylinder Hydraulic 4-way connector rear, 1+2 cells Rear pressure line, 2nd hydraulic circuit Separate rear return line Tipping hydraulics Dual-circuit, three-cell, fully proportional hydraulic system Snow plow blade Implement carrier series Compression class (4–5): 09 U200 Compression class (6): 0 Compression class (7–8): 12 chassis, LEFT-HAND DRIVE Instrument display unit, 12.7 cm, with video function CD radio, Bluetooth Warning light for telescopic bottle AdBlue tank 16 liters Work lights, cab rear wall TOP HEADLIGHT WASHER SYSTEM ENTRY LIGHTS BI-XENON HEADLIGHTS, LED DAYTIME RUNNING LIGHTS LED INDICATORS, YELLOW, LEFT AND RIGHT, WITH MOUNTS ADDITIONAL LED HEADLIGHTS, WITH ROOF BRACKET ADDITIONAL ADJUSTABLE HEADLIGHTS, A-PILLAR ENGINE OM934, L4, 5.1 L, 130 KW (177 HP), 750 NM ENGINE SPEC EURO VI, WITH OBD-C HIGH PERFORMANCE ENGINE BRAKE CLEAN-FIX RADIATOR QUICK-CLEANING SYSTEM...

Condition: excellent (used), Vötsch "Headlight Test Bench – Weiss/Vötsch VCS³ 4100-5-S (Indoor & Outdoor), available from calendar week 40" Year of manufacture: 2018 For sale is a complete temperature and climate testing system for front headlights, consisting of two coupled Vötsch VCS³ 4100-5-S climate test chambers (indoor & outdoor versions). The system was specially developed for the automotive industry and enables combined environmental testing to OEM standards. Main Features - Temperature and climate testing - Rain/spray simulation (flow rate 1–18 l/min, spray temperature 5–32 °C, 200 l tank) - Infrared irradiation (4 × 1.2 kW) for solar load simulation - Vacuum unit (0–50 Pa) for leak testing - Airflow up to 15 m/s (driving wind simulation) - Real-time webcam monitoring - Comprehensive sensor suite (temperature and humidity sensors) - Additional power supplies for test specimens (12–48 V) Outdoor chamber (VCS³ 4100-5-S Outdoor): - Temperature range: –20 … +80 °C - Heating rate: 5 K/min | Cooling rate: 3 K/min - Humidity range: 4 … 95% rH - Dew point range: –30 … +79 °C - Extras: webcam, 5 temperature sensors Indoor chamber (VCS³ 4100-5-S Indoor): - Temperature range: –20 … +125 °C - Heating rate: 8 K/min | Cooling rate: 5 K/min - Humidity range: 4 … 95% rH - Dew point range: –30 … +88 °C - Vacuum unit: 0 … 50 Pa - Airflow: 0 … 15 m/s - Extras: 4 power supplies (12–48 V), 3 temperature sensors, 2 humidity sensors Application areas Ideal for testing headlights and similar components under real-world conditions. Suitable for use in automotive development, quality assurance, approval tests, and durability testing. Isdpjw S Ilkofx Ag Neih Weight estimation (approximate) - 2× Vötsch VCS³ 4100-5-S base units: approx. 2 × 840 kg = 1,680 kg (typical catalog value per unit). - Additional equipment/peripherals (rain, IR, vacuum, airflow, control cabinets, cabling, partition wall): approx. +400 to +900 kg. - Water in tank (200 l): +200 kg during operation. - Transport “dry” (empty tank): approx. 2.1–2.6 t - Operation “wet” (full tank): approx. 2.3–2.8 t - Summary: approx. 2.1–2.8 t Scope of delivery - Vötsch VCS³ 4100-5-S indoor chamber - Vötsch VCS³ 4100-5-S outdoor chamber - Partition wall for VCS³ 4100-5-S - Dimensions: Height × Width = 80 × 80 cm - Rain/IR/vacuum/airflow units - Condition: used - Scope of delivery: (see picture) (Changes and errors in technical data, specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: used, mileage: 255,000 km, Year of construction: 2014, Field of application: Freight transport Serial number: WDB9066331S98xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21295 Specifications: Km: 255,000 Transmission: Automatic Tires (see pictures) Euro 6 12 seats Wheelchair ramp 163 hp Rearview camera 2 sets of wheels with tires Radio/CD Climate control/AC Service performed at local workshop Ready for delivery Notes: ABS light is on, owner suspects NOX sensor. Description:Mercedes Sprinter 316 Minibus with 12 seats.The bus is from 2014 and EU-approved.Euro 6 engine with 163 horsepower. Iisdexb N Hyspfx Ag Neh Km: 255000 HK: 163 Technical approved: Yes EU-approved until: 18.06.2026 Own weight: 2640 Total Weight: 3500 Payload: 785 Width: 199,3 Length: 608,6 Euro: 6 Model: Sprinter 316 Gearbox: Automatic Number of seats: 12

Condition: used, Double Bench Grinder STEPHAN-WERKE HAMELN Type SLD 121 Serial No. 1176445 Grinding wheel diameter: 175/145 mm Grinding wheel width: 20 mm Isdpsxciu Hjfx Ag Neih Motor power: 0.37 kW Grinding wheel speed: 2800 rpm Mains connection: 380 Volt, 50 Hz - Original base - Side-mounted ball bearing slide with dovetail guide - Universal holder for the sliding carriage Space requirement (L x W x H): 470 x 430 x 1160 mm Weight: approx. 80 kg In good condition

Condition: excellent (used), Year of construction: 2019, X 2000 mm, extended by Scharmann to 2500 mm. Y 1200 mm Iedpsw U Dh Hjfx Ag Njih Z 1000 mm W 600 mm B 360° // 0.001° Spindle speed range: 8 - 3000 rpm. Faceplate: 600 mm Tool changer with 40 positions. Table size: 1200 x 1650 mm Control: Siemens 840 D SL (complete retrofit in 2019) Spindle diameter: 125 mm Taper: SK 50 Speed: 8 to 3000 rpm In 2019, the machine was completely overhauled by Starrag (Scharmann).

Condition: new, bore capacity in steel (diameter) 18.0 mm throat 190 mm bore stroke 80 mm Iodpoxaay Uefx Ag Noih morse taper 2 Kurzspindel MK turning speeds 225 - 4.300 U/min voltage 400 / 50 Hz Volt table: 300 x 240 mm column diameter 65 mm engine output 0.37 / 0.55 kW weight 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, For sale is a used, fully functional Dynapack DAQ54 chassis dynamometer with direct wheel hub connection. The system was purchased in March 2019 and has completed approximately 300 test cycles since – always carefully maintained and in excellent condition. Iisdpfxewuqwvo Ag Nsh The test bench comprises four mobile measurement units that are mounted directly to the vehicle's wheel hubs (after removing the wheels). Operation and data evaluation are handled via the included control unit with original software. Technical specifications: Max. measurable power: 3,000 hp / 2,200 kW (up to 1,500 hp / 1,100 kW per axle) Supports front-, rear-, and all-wheel drive Stationary or mobile operation (entire unit fits in a van) System advantages: - Precise power measurement via direct force transfer – no slippage, no friction losses - Maximum safety: No risk of tire blowouts or vehicle movement - Flexible deployment: Quick reconfiguration and compact design, also ideal for mobile use - Perfectly suited for tuning, development, and performance diagnostics Feel free to ask further questions. Inspection and testing are possible by arrangement.

Condition: good (used), functionality: fully functional, throat depth: 180 mm, spindle speed (min.): 480 rpm, overall weight: 65 kg, Bench Drill Manufacturer: IXION Model: BT 13 Technical Data: Manufacturer: IXION Model: BT 13 Year of manufacture: Spindle speeds: 480 – 850 – 1400 – 2300 – 4000 rpm Drilling capacity: max. 13 mm in steel Table size (base): 230 x 170 mm Swivel table: 230 x 170 mm Drilling depth: 70 mm Tool holder: B 16 or MK 2 Throat depth: 180 mm T-slots: 10 mm Power: 1.5 kW Weight: 65 kg Iiodpfx Ajw Ug Dqeg Noh Dimensions: L 0.4 x W 0.5 x H 0.855 m All information subject to change and without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2025, TS 300 SD P Bench Grinder with dust extraction, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm - Speed (rpm): 1,250 - Three-phase motor 400 V / 2.2 kW: Operating mode S2-30 min (Short-term operation) - Extractor motor 0.55 kW, suction capacity 350 m³/h - Weight (kg): 90 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE! Iiodpor Ez Uwsfx Ag Nsh

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction Ijdpotrpiijfx Ag Noih - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 25.0 / 30.0 mm throat 150 mm bore stroke 120 mm threading M18 / M22 spindle taper 3 MK table: 300 x 270 mm turning speeds 200 - 4.000 U/min column diameter 100 mm total power requirement 0.75 / 1.1 kW weight 170 kg range L-W-H 800 x 500 x 1400 mm from a training workshop (!!) New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle Iedpfx Ajxaamzeg Nsih - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop

Condition: new, Year of construction: 2025, Dauer-/Normalbohrleistung 18/20 mm Gewindeschneidleistung M12(steigungsabhängig) Spinde MK II Bohrtiefe 100 mm Ausladung 240 mm Säulendurchmesser 82 mm Nutzbare Arbeitsfläche B x L 340 x 280 mm T-Nutengröße (Arm), Abstand (mm), Abmessung Breite (mm) Anzahl 2, 125, 13/26 Drehzahlanzeige: Digital Bohrtiefenanzeige: Digital Bohrtiefenanschlag: schnell verstellbarer Anschlagring Iodpfxsulvd Hj Ag Nsih Bohrvorschub von Hand Tischhöhenverstellung mit Zahnstange Motor Drehstrom – frequenzgeregelt, 230 V, 0,75 kW Spindeldrehzahlen stufenlos 30 – 3000 1/min Tischarbeitsfläche: 155 - 415 mm Fußarbeitsfläche: 155 – 550 mm Maschinen-Abmessung: 355 x 705 x 1065 mm Gewicht: 170 kg Zubehör Optional: Bohrpaket 3: mit [felix] 2.0 100 Maschinenschraubstock Flott [felix] 100, Schnellspannbohrfutter 3-16 mm (Genauigkeit 0,17 mm), Kegeldorn MK 2 B18 und Reduzierhülse MK 2 auf Mk 1 491,00 € Werksgarantie: 3 Jahre Frei Haus einschliesslich Verpackung (nur Deutschland ) Lieferzeit: sofort ab Lager

Condition: new, Year of construction: 2025, Standard equipment: robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop continuous speed control connection cable with SCHUCO plug (1.2 m) undervoltage release drill protection with electric. Protection thermal overload protection emergency stop button Weight in kg: 44 motor kW: 0.45 alternating current 230 V speed 1/min: 250-3000 drilling capacity mm: Isdpfx Ajihipzeg Neih - steel Ø 12 mm - aluminum Ø 20 mm - soft wood Ø 40 mm - drilling depth 60 mm - projection 220 mm - column diameter 70 mm - usable table surface (W x L) 300 x 250 mm - T-slot size number 2, distance 100 mm dimensions width 14/26 mm - spindle B 16 - digital speed display - drilling depth display: scale - drilling depth stop: quickly adjustable stop ring - feed: by hand - FACTORY WARRANTY: 3 years - free delivery incl. Packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2025, Dauer-/Normalbohrleistung 18/20 mm Gewindeschneidleistung M12(steigungsabhängig) Spinde MK II Bohrtiefe 100 mm Ausladung 240 mm Säulendurchmesser 82 mm Nutzbare Arbeitsfläche B x L 340 x 280 mm T-Nutengröße (Arm), Abstand (mm), Abmessung Breite (mm) Anzahl 2, 125, 13/26 Drehzahlanzeige: Digital Bohrtiefenanzeige: Digital Bohrtiefenanschlag: schnell verstellbarer Anschlagring Bohrvorschub von Hand Tischhöhenverstellung mit Zahnstange Motor Drehstrom – frequenzgeregelt, 230 V, 0,75 kW Spindeldrehzahlen stufenlos 30 – 3000 1/min Tischarbeitsfläche: 155 - 415 mm Fußarbeitsfläche: 155 – 550 mm Maschinen-Abmessung: 355 x 705 x 1065 mm Gewicht: 170 kg Zubehör Optional: Bohrpaket 3: mit [felix] 2.0 100 Maschinenschraubstock Flott [felix] 100, Schnellspannbohrfutter 3-16 mm (Genauigkeit 0,17 mm), Kegeldorn MK 2 B18 und Reduzierhülse MK 2 auf Mk 1 491,00 € Werksgarantie: 3 Jahre Iisdpfx Agsi Azzke Njh Frei Haus einschliesslich Verpackung (nur Deutschland ) Lieferzeit: sofort ab Lager

Condition: new, Year of construction: 2025, Standard equipment: robust, high-quality and inclined rotating hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop continuous speed control connection cable with SCHUCO plug (1.2 m) undervoltage release drill protection with electric. Protection Iiodpfoby Stpjx Ag Noh Emergency stop push button Technical data: Weight in kg: 30 Motor kW: 0.45 Alternating current 230 V Speed 1/min: 250-3000 Drilling capacity mm: 10 - Steel Ø 12 mm - Aluminium Ø 20 mm - Soft wood Ø 40 mm - Drilling depth 50 mm - Projection 180 mm - Column diameter 50 mm - Usable work surface WxL 300 x 200 mm - T-slots, number 2, distance 100 mm Dimensions width 12/20 mm - Spindle B 16 - Digital speed display - Drilling depth display scale - Drilling depth stop: quickly adjustable stop ring - Manual feed - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? WE ARE FLOTT'S SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2025, Spindle speed continuously electronically 40-4000 1/min Spindle mount MK 2 Table height adjustment with rack Thread cutting capacity max M10 Setting the thread cutting depth via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 13 mm / 15 mm Iodpoby Swhefx Ag Neih Drilling depth 60 mm Throw 225 mm Column diameter 60 mm Usable table surface (W x L) 330x250 mm Machine dimensions (W x D x H) 420x450x860 mm Machine dimensions (with VP) (W x D x H) 452x700x1130 mm Weight 62 kg Max. distance Spindle/table/base 300/ 360 mm AC motor with frequency converter 230 V, 0.54 kW OPTION: Drilling package no. 2 - Vice felix, jaw width 80, clamping range max. 120 mm - Keyless drill chuck 1-13 mm mount B16 - Taper mandrel MK II/B16 - Reducing sleeve MK II/MK I Price: € 320.00 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2025, Description Double-sided grinding machine TS 200 SD P with extraction system, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Iedpor Eqzfsfx Ag Nsih Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Extraction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimensions without packaging (mm): 250 x 470 - Speed (rpm): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 2008, Made in Germany Iijdpfxewk H S Ie Ag Njh Drill chuck: B 16 Speed: 480 - 4,000 rpm