Used Berlin for sale (2,475)

Condition: used, mileage: 18,000 km, power: 35 kW (47.59 HP), first registration: 02/2019, fuel type: electric, maximum load weight: 477 kg, color: white, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, car registration, central locking, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, traction control, truck registration, Citroen Berlingo Full Electric Van, 3 seats, Club L2, Insulated Registration: 02/2019, Mileage: 18,800 km Engine and transmission: Electric, automatic, 35 kW, Zero Emission History and condition: No accidents, insulated van Hsdpfxek Ak Enj Abgsp Comfort and practicality: Automatic air conditioning, multifunction steering wheel Safety: Anti-theft system Payload: 477 kg VAT shown: €11,850.00 + 22% VAT = €14,453.00 Customized financing and leasing options available Also available with no down payment, low monthly installments, up to 84 months Trade-in and scrapping options available Mileage is CERTIFIED both in the contract and on the invoice. Despite our efforts to provide all the details of the vehicle, there may be some discrepancies in the listed accessories and/or the photographs. We invite you to verify the details with one of our consultants, who will be available to provide any additional information.

Condition: like new (used), fuel type: diesel, Year of construction: 2021, CITROEN BERLINGO LONG WHEELBASE, YEAR 2021, INSULATED WITH REFRIGERATION UNIT, ATP FRC -20° ROAD NETWORK UNTIL 2027 (RENEWABLE), DOUBLE REMOVABLE COMPARTMENT, 191,000 KM, 3 SEATS, AIR CONDITIONING, FACTORY STEREO, SINGLE OWNER, FULL SERVICE HISTORY, TIMING BELT REPLACED, 1-YEAR WARRANTY, FINANCING OR LEASING AVAILABLE Hsdpsxt Eibefx Abgsp

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Hsdpfx Abjzb Idrjgop Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Hedpfezb Idfox Abgep Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: used, 20DV DUO OFFICE CONTAINER ✅ Container type: multiple Duo office containers / double containers 20DV Hsdpjzhu R Refx Abgsp ✅ Condition: used, watertight, without equipment, laminate can be installed on site, original images ✅ Features: Containers have electricity and heating; the entrance door is on the short side. Containers are sold in used condition and may have dirt, color variations, rust, etc. Containers are delivered without equipment (chairs, tables, etc.). ✅ Dimensions (L x W x H) per container: 6,058 x 2,438 x 2,800 mm – internal height 2,500 mm ✅ Availability: from Berlin ✅ Transport: Free and non-binding offer for delivery (including unloading, if desired) – simply provide the postal code ✅ Price applies per DUO unit ✅ Variety: In addition to office containers, we also offer sea containers in all common sizes (20DV, 40DV, 20HC, 40HC…) for storage, construction projects, logistics solutions, or sea transport. Contact us now – we will be happy to advise you! NAUTEXA GmbH – Your container partner

Condition: used, Offered are used 20DV office containers. CONTAINER TYPE: Office container 20DV CONDITION ON DELIVERY: Used, wind- and waterproof, without equipment, original pictures. All containers are equipped with electrical installation and heating, the entrance door is located on the short side. Containers are sold in used condition and may show defects, contaminations, color differences, rust, etc. Hedpfx Aozhm H Rsbgsp DIMENSIONS LxWxH: 6058 x 2438 x 2800 mm, internal clear height 2500 mm. AVAILABILITY: Immediately TRANSPORT: Please provide your postal code so we can send you a free and non-binding offer for the containers including delivery and, if necessary, unloading from the truck. VARIETY: We also offer sea containers in all common sizes (20DV, 40DV, 20HC, 40HC, …) to suit any requirement. Whether for storage, construction projects, logistics solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Frying machine, Roka / Kippfix SB 40B-S Frying machine without heating coils for approximately 360 pieces/hour of Berliner doughnuts / pastries Hjdpfx Abjzfypmsgsp 2 frying baskets & 1 steam lid Drip tray Connection 400V, 16A-CEE plug Used equipment Visit us!

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Hjdpfehwrhfex Abgjp Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: ready for operation (used), Year of construction: 2022, Power: 15kW, maximum shaft speed: 3000rpm, oil capacity: 6l, tank capacity: 500l, operating pressure: 10bar, capacity: 2.2m³/min, control panel: Logik 9, length: 1915mm, width: 650mm, height: 1640mm, weight: 530kg, operating hours: 2h, with Wortmann drukosep 2 oil-water separator. Inspection on site is possible. Hodpfx Aszhw Rtsbgjp

Year of construction: 2023, condition: ready for operation (used), A Flashforge 3D printer including the associated filament drying and storage unit is available. 1) Industrial FFF-3D printer Flashforge Creator 4A with HT extruder, build volume dimensions X/Y/Z: 400mm/350mm/500mm, layer height range: 0.05mm-0.4mm, printing accuracy: +/-0.2mm, max. printing speed: 200mm/s, max. extruder temperature HS/HT: 360°C/320°C, machine dimensions X/Y/Z: approx. 850mm/700mm/1000mm, weight: approx. 100kg, operating hours: approx. 5600h. 2) Mobile Flashforge filament drying and storage station, max. drying temperature: 120°C, drying chamber dimensions X/Y/Z: 500mm/375mm/200mm, machine dimensions X/Y/Z: approx. 840mm/675mm/600mm, weight: approx. 70kg. Including F extruder, HS extruder, 2x HT extruders and a tool set. The mainboard was replaced at approx. 4378 operating hours. Documentation available. An on-site inspection is possible. Hedpfx Aozhw R Hebgsp

Condition: ready for operation (used), Ink cup/doctor ring diameter: 130mm, cliché size: 150 x 300mm, maximum print image size: 84.5 x 84.5mm, print image diameter: 120mm, cycle rate in continuous operation: 480 cycles/h, cycle rate in start stop operation: 450 cycles/h, pad stroke over cliché: 10 to 100mm, pad stroke over workpiece continuously adjustable: 10 to 180mm, maximum pad installation height: 90 to 115mm, printing force: 2900N, speed control: continuously variable, automation interface: D-SUB 37-pin, service interface: Profinet, air consumption: 130NL per cycle, connected load: 1.2kW, control system: Siemens SIMATIC PANEL, length: 1510mm, width: 1692mm, height: 2205mm, weight: 1.68t. Inspection on site is possible. Hodpfjzhw R Tjx Abgop

Condition: ready for operation (used), Year of construction: 1993, A Clark diesel forklift is offered. Load capacity: 7500kg, load center: 600mm, max. lifting height: 6070mm, lowered height: approx. 3300mm, transmission type: torque converter transmission, engine manufacturer: Perkins, power: approx. 89hp, operating weight: 10640kg. UVV inspection and maintenance: carried out. Inner left tie rod end is loose. Viewing possible by appointment. Hodpfx Abezhw T Isgep

Condition: ready for operation (used), Year of construction: 2021, A Wacker Neuson wheel loader, ideally suited for agricultural purposes, is available. Engine: Deutz TD 2.9 L4 S5, Power: 61hp/45kW, Displacement: 2900cm³, Emission standard: Stage V, Exhaust aftertreatment: DOC/DPF, Max. engine speed: 2300rpm, Max. tipping load: 3300kg, Standard bucket capacity: 0.8m³, Max. working hydraulic pressure: 220bar, Max. travel hydraulic pressure: 450bar, Fuel tank: 82l, Kinematics: Z, Articulation angle: 44°, Oscillation angle: +/-12°, Max. dump height: 2430mm, Lifting force: 41.36kN, Outside turning radius: 3870mm, Tires: 405/70 R20. Transport dimensions X/Y/Z: approx. 4800mm/1850mm/2550mm, Operating weight: approx. 4600kg, Operating hours: approx. 1382h. Including 1200mm pallet forks, FEM II rotating fork positioner, road approval and hydraulic Z-HV quick coupler. The engine or the control system of the windshield washer system has a defect. Documentation available. An on-site inspection is possible. Hodpozhw Skofx Abgep

Year of construction: 2000, condition: ready for operation (used), A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible. Hjdpfx Abjzhw Tujgep

Year of construction: 2017, condition: ready for operation (used), A Schneeberger CNC 5-axis tool grinding machine is available. 1) Schneeberger Corvus GDS 650 turning machine, year of manufacture: 2017, grinding spindle interface: HSK80, grinding spindle power: 26kW/32kW, max. A-axis swing: 700mm, software: Quinto5.4.6, spindle hours: approx. 10400h. Including extensive accessories, Zeno precision 3D coordinate probe, quick clamping with tailstock, electrostatic extraction system, fire protection system, double grinding wheel capacity, integrated measurement and documentation. 2) Vomat FA 120EKSd filtration system, year of manufacture: 2016, filtration capacity: 120l/min, filling capacity: 500l, filtration fineness: 5µm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, weight: approx. 500kg. 3) Vomat HSSV3 filter module, year of manufacture: 2016, max. filling capacity: 350l, max. filtration capacity: 120l/min, operating pressure range: 6bar-10bar. 4) Hyfra Sigma 7-S cooling unit, year of manufacture: 2017, cooling capacity at 32°C: 6900W, max. operating pressure: 42bar, refrigerant quantity: 1.1kg, refrigerant: R410A, weight: approx. 170kg. Documentation available. An on-site inspection is possible. Hodpfx Abezhw Ryegsp

Condition: ready for operation (used), Year of construction: 2005, The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible. Hsdszhw Sdspfx Abgop

Year of construction: 1978, condition: ready for operation (used), A roll forming line by Instytut Obróbki Plastycznej (Poland) for plastic metal forming is available. Roll stations: 12, shaft diameter: 50mm, max. profile width: 300mm, max. profile thickness: 2mm, overall system dimensions X/Y: approx. 20m/4m. Including an automatic cut-off unit with an incremental length measuring system and a payoff reel. An on-site inspection is possible. Hsdpfxjzhw Swj Abgop

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Hedpfozhw S Rjx Abgop

Year of construction: 1998, condition: ready for operation (used), A CNC PCB drilling and milling machine for PCB manufacturing is available. Stations: 2, Speed: 125000rpm, Collet: 3.175mm, Tool diameter range: 0.1mm-6.35mm, Working dimensions X/Y: 630mm/765mm, Positioning accuracy: 5µm, Repeatability: 4µm, Rapid traverse: 25m/min. Documentation available. An on-site inspection is possible. Hedpjzhw Thofx Abgsp

Condition: ready for operation (used), Design: drop through rotary valve, top connection: round flange, drive: SEW gear motor, with pneumatic air purge shaft sealing unit, filter regulator, pressure gauge, and hose connections, suitable for plastics, food products, pet food, animal feed, pharmaceuticals, infant formula, chemicals, biomass, aquaculture, dairy products, cosmetics, paints and coatings, minerals, recycling, batteries, and tires. Inspection on site is possible. The machine is not under power. Hjdpfx Aozhw Sqebgop

Year of construction: 2009, condition: ready for operation (used), Equipment: height-adjustable conveyor, lid sorting and feeding system, conveyor belt with infeed and outfeed section, stainless steel construction, safety enclosure with interlocked safety doors, integrated electrical control cabinet and operator panel, the machine is designed to process Pano TO 100mm PP HOmao closures without liners. Inspection on site is possible. Hsdpozhw Tnofx Abgsp

Year of construction: 1993, condition: ready for operation (used), A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible. Hodpfx Abszhw S Dsgjp

Year of construction: 1987, condition: ready for operation (used), A roll material processing machine MAG is offered. Min./max. material width: approx. 5mm/50mm, material thickness range: approx. 0.05mm to 1.5mm, reel mandrel diameter: 76mm, usable mandrel length: approx. 60mm, max. roll outer diameter: approx. 300mm, guide roller diameter: approx. 40mm, material guide track width: approx. 50.5mm. Inspection possible by prior arrangement. Hodpszhw Tbofx Abgsp

Year of construction: 2023, condition: ready for operation (used), A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Kaeser 500/3110 compressed air receiver, year of manufacture: 1999, max. pressure: 11bar, max. temperature: 120°C, volume: 500l. Documentation available. An on-site inspection is possible. Hodpfx Aozhw Tzobgsp

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Hsdpfx Aboy U Nqnjgsp